Hi
I unlocked and rooted my tf701t, have had no issues.
Still working great, but just noticed under settings, about, status
It says serial number DEFACE
I also cannot find a sticker on tablet or dock with serial number on.
Is this normal, a side effect of unlocking or just mine with this issue?
Thanks
Sent from my K00C using Tapatalk 4
I have mine unlocked and rooted and mine has a proper serial number listed in the About > Status section.
Ok thanks, I did a full reset and it came back must have been something in xposed framework
Sent from my K00C using Tapatalk
That's really strange. I've got Xposed installed too with APM.
Sent from my HTC One using Tapatalk
Related
I have little z sticker on the back
Of my phone,is that normal?
Can i get it of or does it really have function.
Ps the z logo is also seen on the back on the box of the phone in the list of feutures
Sent from my C6603 using xda app-developers app
It's just a sticker signifying that the phone has NFC capabilities. You can remove it.
Sent from my C6603 using Tapatalk 2
Its the NFC sticker and yes it can be removed. its just to show you where the sensor is. i asked the same question as you when i got my phone.
Hi
I installed a replacement usb ribbon controller about 2 weeks ago and after the install the ringer/loudspeaker stopped working and i couldnt get any mobile reception unless i was outdoors and not around tall buildings.
I replaced the loudspeaker but its still only working at very low volume and cuts out if the sound goes above a certain level. I also replaced the antenna cable and the mobile reception seems to have improved a lot but instead of registering onto my preferred network automatically it just keeps showing emergency calls only.
Im assuming that maybe the usb controller i installed is the root of all the problems.
Can anyone please help???
Ive been trying to sort this but cant seem to figure out what the issue is. My imei number and serial are showing up correctly and i am on stock jb 4.1.2 lt9 which is the correct one for my country and carrier.
PLEASE HELP!!
Sent from my GT-N7000 using xda app-developers app
TigerstyleUK said:
Hi
I installed a replacement usb ribbon controller about 2 weeks ago and after the install the ringer/loudspeaker stopped working and i couldnt get any mobile reception unless i was outdoors and not around tall buildings.
I replaced the loudspeaker but its still only working at very low volume and cuts out if the sound goes above a certain level. I also replaced the antenna cable and the mobile reception seems to have improved a lot but instead of registering onto my preferred network automatically it just keeps showing emergency calls only.
Im assuming that maybe the usb controller i installed is the root of all the problems.
Can anyone please help???
Ive been trying to sort this but cant seem to figure out what the issue is. My imei number and serial are showing up correctly and i am on stock jb 4.1.2 lt9 which is the correct one for my country and carrier.
PLEASE HELP!!
Sent from my GT-N7000 using xda app-developers app
Click to expand...
Click to collapse
This usually points to installing the wrong revision of the usb controller. Do you have your old usb, check the revision number and compare it.
Sent from my GT-N7000 using xda premium
Rev number was the same but was not an official samsung replacement part. Have ordered a proper samsung part now so hopefully this will sort the issue.
Sent from my GT-N7000 using xda app-developers app
TigerstyleUK said:
Rev number was the same but was not an official samsung replacement part. Have ordered a proper samsung part now so hopefully this will sort the issue.
Sent from my GT-N7000 using xda app-developers app
Click to expand...
Click to collapse
That should fix it, can you post back and let us know?
Sent from my GT-N7000 using xda premium
Hello,
So I bought mine from ncix.ca and it arrived today. It says build number K00C. I would like to know what others is, and if they have any issues with it. I'm comparing to see if they have improved the tab over different batches. Thank you guys! ( And gals )
Sent from my K00C using Tapatalk
Actually the model number is K00C,
mine is android 4.2.2, Build number US_epad_10.14.1.47_20131022
AngryDinosaur said:
Actually the model number is K00C,
mine is android 4.2.2, Build number US_epad_10.14.1.47_20131022
Click to expand...
Click to collapse
What is that number that shows which batch is it? Like a, b, c etc...
Sent from my K00C using Tapatalk
The batch number is in your serial number. It goes by month. It's the first two numbers after the letters. Mine is 07. That obviously would represent July. People with 09 will be September's batch...
Sent from my Transformer Infinity TF701T using Tapatalk HD
K mine is 05, and my tab feels laggy... But then it might be because I have used nexus 10 alot and recently nexus 5. Hopefully jellybean makes it smoother.
Sent from my K00C using Tapatalk
xRevilatioNx said:
The batch number is in your serial number. It goes by month. It's the first two numbers after the letters. Mine is 07. That obviously would represent July. People with 09 will be September's batch...
Sent from my Transformer Infinity TF701T using Tapatalk HD
Click to expand...
Click to collapse
eh? i got a number inbetween (like X9XXXX999999) and the two first numbers behind all letters are 1 and 5
So I actually posted this in the RMA thread but it just got lost in all the posts. Plus I can't find it posted anywhere else.
First two phones I had were 310k, both had faults and had to download the patch before using the phone.
My third phone is 311k, no faults and it came with KitKat preinstalled (no patch to download)
To check what build (batch) you have, look on your box where it shows the model #, imei # etc and look for S/N. The first 4 characters = build #.
I'm going to try and keep a log of all the build numbers and see if there are any changes to the phone like with the Nexus 4.
So.. so far:
310k - Need to install KitKat - Seems to have quality issues from my experience
311k - Preinstalled KitKat - Quality control seems better
This is just based off of three phones though. More information is needed.
Mine downloaded the update at first boot, i don't have the box here right now, but i will report the build version tomorrow
Edit:
ye version 310k here too, lets see what the rma one will be, it should be here next week
yep mine says 310k and mine updated when i turned it on.. kitkat was NOT pre installed
When mine came in the mail November 15th it already had the update patched on it straight out of the box so i guess I had the second batch. Mine is 310K
Mines 310k had to update to kit kat
Sent from my Nexus 5 using Tapatalk
Any improvements with the camera in the newer builds? Maybe I will RMA mine...
Sent from my Nexus 5 using xda app-developers app
I got mine from sprint and it doesn't have the s/n on the box. I wonder how I could check it.
Sent from my SPH-L900 using xda premium
cas8180 said:
Any improvements with the camera in the newer builds? Maybe I will RMA mine...
Sent from my Nexus 5 using xda app-developers app
Click to expand...
Click to collapse
Haven't noticed anything. I have both builds in my hands at the moment. 310k will be shipped back to Google tomorrow.
musclehead84 said:
I got mine from sprint and it doesn't have the s/n on the box. I wonder how I could check it.
Sent from my SPH-L900 using xda premium
Click to expand...
Click to collapse
Did you have to install a patch before using your phone? If so its a 310k build.
Yes I had to install the 128 mb patch when the phone first turned on.
Sent from my Nexus 5 using xda premium
All N5 comes with KitKat. The update wasn't from JB to KitKat!
Sent from my Nexus 5 using Tapatalk
Can you please specify what you mean specifically by better quality control?
[email protected] said:
Can you please specify what you mean specifically by better quality control?
Click to expand...
Click to collapse
I have an 311K (just got it today) and while it has LTE (unlike my 310), the vibration motor now sounds like a laser beam...? :crying:
I got a 311K yesterday - no update was needed.
- The camera is slow
- Vibration is weaker than my Galaxy Nexus, but still noticeable when it rings in my pocket
- The speaker seems pretty loud to me. I can feel it vibrate a bit when I play music
310k, everything seems to be good
Sent from my Nexus 5 using xda app-developers app
310 functions flawlessly
Sent from my Nexus 5 using xda app-developers app
I can also confirm.. I got 311K and no i didnt have to do update for real
Sent from my SGH-T999L using xda app-developers app
Elisha said:
All N5 comes with KitKat. The update wasn't from JB to KitKat!
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
Technically, they all come with "Key Lime Pie" preinstalled (an early build of 4.4). They're patched to KitKat right after startup.
Today I got my N5. It is 311k. No issues so far. No screen issues, no rattle sounds. 32gb black
Sent from my Nexus 4 using Tapatalk 2
Elisha said:
All N5 comes with KitKat. The update wasn't from JB to KitKat!
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
This>
maxpower7 said:
Technically, they all come with "Key Lime Pie" preinstalled (an early build of 4.4). They're patched to KitKat right after startup.
Click to expand...
Click to collapse
New batch of manufacture.. Nothing to see here. It will continue to change until EOL
Hello! I have a note 3 and in enough time my phone will boot then go to the at&t logo then just sit there for ~5~ min or even more...then sometimes will go back to the Samsung thing back to At&T logo and give it enough time and hard rest but it comes back and I have my phone again. Pain....in..my..ass
The solution: factory reset...but I hate doing this because I'm doing it repeatly now...
Has anyone else has this problem or have any advice for me?
Edit: Does anyone know anyone willing to trade a Note 3 AT&T for a SM-N9005? It has a glass screen protector and a aluminium home button.
Sent from my SAMSUNG-SM-N900A using Tapatalk
hacktheplant said:
Hello! I have a note 3 and in enough time my phone will boot then go to the at&t logo then just sit there for ~5~ min or even more...then sometimes will go back to the Samsung thing back to At&T logo and give it enough time and hard rest but it comes back and I have my phone again. Pain....in..my..ass
The solution: factory reset...but I hate doing this because I'm doing it repeatly now...
Has anyone else has this problem or have any advice for me?
Edit: Does anyone know anyone willing to trade a Note 3 AT&T for a SM-N9005? It has a glass screen protector and a aluminium home button.
Sent from my SAMSUNG-SM-N900A using Tapatalk
Click to expand...
Click to collapse
What did you do to your phone? As in did you root it? Try to install a custom ROM? A custom recovery? Anything like that? You can odin back to stock from Root De La Vega from what I understand. I don't see anybody trading their phone for a broken one. You can't even trade here on XDA, you have to use Swappa or something else.
I added xposed and some apps the ones I am using are
Call recording
Gravity Box
Wanam
I can't install any custom Roms bootloader is still locked :/
So I fixed it by just factory resting everything. So my point on posting this is to see if anybody has this problem. The phone isn't broken it in perfect condition. I just don't know how much longer I can take without an unlocked bootloader.
If you wanted I could screenshot of what apps are using root?
Sent from my SAMSUNG-SM-N900A using Tapatalk
hacktheplant said:
I added xposed and some apps the ones I am using are
Call recording
Gravity Box
Wanam
I can't install any custom Roms bootloader is still locked :/
So I fixed it by just factory resting everything. So my point on posting this is to see if anybody has this problem. The phone isn't broken it in perfect condition. I just don't know how much longer I can take without an unlocked bootloader.
If you wanted I could screenshot of what apps are using root?
Sent from my SAMSUNG-SM-N900A using Tapatalk
Click to expand...
Click to collapse
Try taking your SD card out and then see if you still have the long boot or loop issue. Some phones are having issue reading certain brand SD cards and it id causing long boots or other strange problems..
Interesting....how old school lol
I'll try that
Sent from my SAMSUNG-SM-N900A using Tapatalk
That didn't help. Great suggestion tho
Sent from my SAMSUNG-SM-N900A using Tapatalk
hacktheplant said:
That didn't help. Great suggestion tho
Sent from my SAMSUNG-SM-N900A using Tapatalk
Click to expand...
Click to collapse
Just curious what (security hacks & advance mods) settings did you use in wanan?
when you got your note 3...You didnt carry over your sd card with anything on it did you from prior device? Or use titanium backup?
Id try to trouble shoot it this way...Disable wanan...reboot see If it does it again....If so, start with the other app and disable or unistall.....Keep trying you'll find the source
Gravity Box is not to be used with Note 3 ROM. I know things work with it but the OP says not to use on TouchWiz roms. Or I might be wrong..
Sent from my SAMSUNG-SM-N900A using XDA Premium 4 mobile app
Gravity Box
hacktheplant said:
Interesting....how old school lol
I'll try that
Sent from my SAMSUNG-SM-N900A using Tapatalk
Click to expand...
Click to collapse
I had the same issue I guess it coz of Gravity Box, it is advised not to use Gravity Box on Note 3 Touch Wiz I removed it and never faced the Boot Loop or System UI Stopped working since then.