Database Develop

[Q] Error Flashing Evervolv 2.1.0 (Signature Verification)

Hey, I'm pretty new to xda so feel free to point out anything I did wrong when creating this post...
I downloaded the Evervolv 2.1.0 build added March 1st on a thread started by jaybob413, and have been able to flash it fine and use it, but that thread has been closed and redirected to MattCrystal's thread using the same build.
I have downloaded the rom from the link that was posted, but haven't been able to flash it. I'm using Amon Ra recovery 1.6.2.
This is the error I get when verifying update package:
E:Wrong digest:
system/build.prop
E:Verification failed
Installation aborted.
When doing some research, I saw that people were saying to "toggle signature verification" under the "other" menu of recovery in the event it's unsigned, but all I see is "Fix apk uidmismatches", "Move apps+dalv", and "Move recovery.log"
I'm S-ON, is that a potential problem?

desertfox154 said:
Hey, I'm pretty new to xda so feel free to point out anything I did wrong when creating this post...
I downloaded the Evervolv 2.1.0 build added March 1st on a thread started by jaybob413, and have been able to flash it fine and use it, but that thread has been closed and redirected to MattCrystal's thread using the same build.
I have downloaded the rom from the link that was posted, but haven't been able to flash it. I'm using Amon Ra recovery 1.6.2.
This is the error I get when verifying update package:
E:Wrong digest:
system/build.prop
E:Verification failed
Installation aborted.
When doing some research, I saw that people were saying to "toggle signature verification" under the "other" menu of recovery in the event it's unsigned, but all I see is "Fix apk uidmismatches", "Move apps+dalv", and "Move recovery.log"
I'm S-ON, is that a potential problem?
Click to expand...
Click to collapse
The option to toggle signatures is in clockworkmod recovery.
There's a thread with the latest recoveries by dastin. That should fix it.
Sent from my HERO200 using XDA

I flashed CWM and didn't need to toggle signature verification, but flashed the ROM fine. Now I just have to look into the red border bug... Thanks!

Flashing Werewolf rom

Hi i just did wipe and formatted system. Now i got (status 7) error and installation aborted when installing rom from external sd_card. :crying:
What should i do now i noticed 6.0.2.8 ver cwm.

Hallako said:
Hi i just did wipe and formatted system. Now i got (status 7) error and installation aborted when installing rom from external sd_card. :crying:
What should i do now i noticed 6.0.2.8 ver cwm.
Click to expand...
Click to collapse
install cwm 6.0.3.1

How
Flying_Bear said:
install cwm 6.0.3.1
Click to expand...
Click to collapse
I tried searching how to install it but can i boot now?
Is there way to install it with older cwm ?
sorry i am little new with android devices.
and ofc i dont have backup

Hallako said:
I tried searching how to install it but can i boot now?
Is there way to install it with older cwm ?
sorry i am little new with android devices.
and ofc i dont have backup
Click to expand...
Click to collapse
install rom toolbox from google play store, install latest cwm from there, and then flash werewolf rom

but
Flying_Bear said:
install rom toolbox from google play store, install latest cwm from there, and then flash werewolf rom
Click to expand...
Click to collapse
But i cant boot now when formatted system

Re flash official 20a with kdz flasher then

Flying_Bear said:
Re flash official 20a with kdz flasher then
Click to expand...
Click to collapse
i am now trying but when i start update flasher crashes when extracting kdz.
log
oblem signature:
Problem Event Name: APPCRASH
Application Name: KDZ_FW_UPD.exe
Application Version: 1.0.4.4
Application Timestamp: 4ac2a689
Fault Module Name: KERNELBASE.dll
Fault Module Version: 6.1.7601.17514
Fault Module Timestamp: 4ce7bafa
Exception Code: e06d7363
Exception Offset: 0000b727
OS Version: 6.1.7601.2.1.0.256.4
Locale ID: 1035
Additional Information 1: 0a9e
Additional Information 2: 0a9e372d3b4ad19135b953a78882e789
Additional Information 3: 0a9e
Additional Information 4: 0a9e372d3b4ad19135b953a78882e789
Read our privacy statement online:
http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt

><
You can do several things:
If your adb is working, i think you can push latest cwm to recovery partition. Find dexters topic on how to do it, but instead of 6.0.2.8, download latest from cwm website and push it.
Alternatively, download zaiben rom, put it on sdcard ext and flash it, then use rom manager etc.
Another thing you can do is search for topic "fixed cm flashable", and flash that cm, then update to latest.
There is one more way, you can edit cm's zip and delete lines checking for device id.
Good luck

Flying_Bear said:
><
You can do several things:
If your adb is working, i think you can push latest cwm to recovery partition. Find dexters topic on how to do it, but instead of 6.0.2.8, download latest from cwm website and push it.
Alternatively, download zaiben rom, put it on sdcard ext and flash it, then use rom manager etc.
Another thing you can do is search for topic "fixed cm flashable", and flash that cm, then update to latest.
There is one more way, you can edit cm's zip and delete lines checking for device id.
Good luck
Click to expand...
Click to collapse
Oh right ill try all i can.
Thanks for helping and that luck is needed.
i got it working after adb push latest cwm and then cm.

[Q&A] [ROM][4.4.2] SlimKat - I9000 [STABLE!]

Q&A for [ROM][4.4.2] SlimKat - I9000 [STABLE!]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer. Thanks for understanding and for helping to keep XDA neat and tidy! :smile:

Official releases for i9000 planned?
I am running Slim-4.4.2.build-5-OFFICIAL-4097 on my i9000. It dates back to May
Are there any stable releases planned? Or do I have to try my luck with the weeklys, if I want to uodate?
Cheers, o

Has anyone got persistent SDcard notification always showing in status bar after reboot..
It will not disappear until you reboot again.
(Below screenshot of persistent sdcard icon)
As previous comments was advised to update su binary, I did that & pushed super su app into
/system. But no luck...
# sent from a blazing slim SGSi9000 using tapatalk 2 #

Hi peeps.
Can someone direct me to Gapps package for slim 4.2 builds..??
Any links.
I looked at slimroms website but could locate onset begins of Gapp packages (flashing slim 4.2)
# sent from a blazing slim SGSi9000 using tapatalk 2 #

Error
Won't boot after install.

The slim Gapps aren't TRDS anymore?? I downloaded the Addons for 4.4 and they're all light themed. i'm on Spirit Rom. Did I miss something or they changed it?

Hi peeps..
Just a quickie..
Anyone know from which slimbean or slimkat build was the "theme engine" theme manager removed..??
If I'm correct previous versions of slimbean had the theme engine within the rom..
After flashing 4.4.2-v5 there is no theme manager anymore..
I've looked everywhere within settings but cannot find it anywhere, or am I not looking in the right place..
Can someone please help..??
# sent from a blazing slim SGSi9000 using tapatalk 2 #

Updating from slimbean 3.1.0
Hi Guys. Its been a long time since I updated my i9000 and I'm wondering what I need to do to get from my current ROM to the 4.4.2 stable build 5.
Currently my i9000 is running the old slimbean 3.1.0 (Android 4.1.2) and I updated CWM recovery in ROM manager to attempt install of the the latest stable but I got the status 7 error message
I did the factory reset, wipe cache and in mounts and storage section format system before attempting to flash the ROM but got above error
So I then did a recovery restore from backup I made just before attempting this update and I'm back to where I was
Where should I go from here? I've tried finding info on status 7 error msg. One search result suggested modifying the updater script to bypass this check but I'm not sure this is the best thing to be doing? I wouldnt want to brick the phone
EDIT: Okay I figured it out after a bit of trial and error. Had to run slimkat ROM zip then goto advanced and reboot to recovery again. and then re-run ROM zip and then it succeeded.
I then had issues with Gapps missing google services but after more trial and error (Mutliple reinstall attempts with different Gapps addons) got that working by installing latest weekly 4.4.4 and the mini 4.4.4 Gapps

4.4.2.build.5
I've just successfully installed 4.4.2 to my I9000. I'm impressed with high speed.
Setup which works fine:
Kernel: Semaphore_KK_3.4.2.tar + Odin3 v1.85
KitKat: Slim-galaxysmtd-4.4.2.build.5-OFFICIAL-4079.zip
Gapps: Slim_mini_gapps.4.4.4.build.8.x-385.zip
EnJoY!

weazie said:
Hi,
Seems that build 9 for galaxysmtd has been taken off from the website, or am I blind?
Does someone have the package? My aim is to get Phoneutil working somehow, and check if the USB port is set to PDA (my usb doesn't get recognized by computer atm)
Cheers,
weazie
Click to expand...
Click to collapse
@weazie your not blind, Slimroms have literally removed weekly build 9.0 for the i9000. i used it for a while and test other roms, after a week i decided to return and the rom was no where to be found, someone out there must have a backup of it..

Hello.
Do you have any idea how to activate Logcat? It's not working for me.
"Unable to open log device '/dev/log/main': No such file or directory"
Best regards

Need HELP
Hi,
I hope people here are still active...
I have a GT-I9000 to fix for my friend's dad. It is currently on Galaxian ROM 2.3.4 and having slowness issue. I looked around and found that this SlimROM may be the solution for this phone. I'm looking at flashing Slim-galaxysmtd-4.4.2.build.5-OFFICIAL-4079 with mini GAPPS directly after wiping out data, cache, etc.
EDIT:
I just flashed Semaphore 2.7.4 through Odin3 v.183 and it was successful.
HOWEVER, I couldn't flash anything on CWM. I am getting below errors:
E:failed to open /etc/recovery.fstab (No such file or directory)
E:unknown volume for path [/cache/recovery/command]
E:Can't mount /cache/recovery/command
E:unknown volume for path [/cache/recovery/log]
E:Can't mount /cache/recovery/log
E:Can't open /cache/recovery/log
E:unknown volume for path [/cache/recovery/last_log]
E:Can't mount /cache/recovery/last_log
E:Can't open /cache/recovery/last_log
E:unknown volume for path [/cache/recovery/command]
After a few searches, it seems that I might have messed up the partitions. Still looking for solutions...

Custom Roms & Instagram issue
So far, I have tried a dozen of ROMs on my i9000 but Slimkat is by far the best.
No other ROM is more stable and reliable with so many functionalities. I especially like it that I can flip between the quick settings and notifications pages. And it is awesome that there is the inbuilt option to customize the hardware buttons! ...
And now the Instagram problem:
I have searched all over the internet You cannot upload a video to Instagram. It always fails on a custom ROM (fails immediately or stops halfway). It's been suggested that it is the phone's camera and its enhanced resolution, which differs from the stock, that causes this problem. Is there a way to fix this? For example, is it possible to flash the stock camera to get around it?
---------- Post added at 07:15 AM ---------- Previous post was at 06:59 AM ----------
jon1011 said:
Hi,
I hope people here are still active...
I have a GT-I9000 to fix for my friend's dad. It is currently on Galaxian ROM 2.3.4 and having slowness issue. I looked around and found that this SlimROM may be the solution for this phone. I'm looking at flashing Slim-galaxysmtd-4.4.2.build.5-OFFICIAL-4079 with mini GAPPS directly after wiping out data, cache, etc.
EDIT:
I just flashed Semaphore 2.7.4 through Odin3 v.183 and it was successful.
HOWEVER, I couldn't flash anything on CWM. I am getting below errors:
E:failed to open /etc/recovery.fstab (No such file or directory)
E:unknown volume for path [/cache/recovery/command]
E:Can't mount /cache/recovery/command
E:unknown volume for path [/cache/recovery/log]
E:Can't mount /cache/recovery/log
E:Can't open /cache/recovery/log
E:unknown volume for path [/cache/recovery/last_log]
E:Can't mount /cache/recovery/last_log
E:Can't open /cache/recovery/last_log
E:unknown volume for path [/cache/recovery/command]
After a few searches, it seems that I might have messed up the partitions. Still looking for solutions...
Click to expand...
Click to collapse
I may have an idea about how to fix your problem.
It is possible that you may have not rooted your stock ROM correctly.
You must place only the cf-root file in the PDA section. No bootloader or any other files should be ticked.
Here's what you should do:
1. Again flash a stock ROM on your phone using ODIN.
2. Root your device without ticking bootloader, phone or csc and leave other options as is.

M110s support?
can i use this rom on m110s?

I have flashed sucessfully but theres a problem ! Help
My wifi dosent workt or dosent even enable in setup :crying:I have flashed slim kat 4.4.2 and gapps 4.4.2 and I have GT19000M GKG3 IF STOCK.

[Q&A] Rom Lollipop AOSP 5.1.0 (Released 2015-03-13) port for ZR testing

Q&A for Rom Lollipop AOSP 5.1.0 (Released 2015-03-13) port for ZR testing
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for Rom Lollipop AOSP 5.1.0 (Released 2015-03-13) port for ZR testing. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!

Thanks for your post
tonytee said:
@uncomment : Did u test it? How about battery and free ram?
Click to expand...
Click to collapse
I just Flash the rom , its smooth , free ram is 1.3 GB thanks a lots
but there is no battery percentage , cant change drawable shortcuts , i need clipboard too could u help me to bring this item ?

Xperia zr said:
I just Flash the rom , its smooth , free ram is 1.3 GB thanks a lots
but there is no battery percentage , cant change drawable shortcuts , i need clipboard too could u help me to bring this item ?
Click to expand...
Click to collapse
Its AOSP, cause that no much options. Waiting xposed for 5.1 release
Sent from my Xperia ZR using XDA Free mobile app

Hi Dear
uncomment said:
Its AOSP, cause that no much options. Waiting xposed for 5.1 release
Sent from my Xperia ZR using XDA Free mobile app
Click to expand...
Click to collapse
I have another problem ,after i turn airplane mode on , i have to reboot my phone to detect sim card, how can i fix it ?
sorry for my bad english

Xperia zr said:
I have another problem ,after i turn airplane mode on , i have to reboot my phone to detect sim card, how can i fix it ?
sorry for my bad english
Click to expand...
Click to collapse
Its a known bug from Z noticed here:
http://forum.xda-developers.com/showpost.php?p=59458446&postcount=17
Sent from my Xperia ZR using XDA Free mobile app

anyone know when we will have a update to lol 5.0 original ?

Cant Flash Rom
Omni Rom 5.1 - Cant Flash zip through TWRP.
The error i get is failed Sym link. Some Simlinks failed.??

Shray said:
Omni Rom 5.1 - Cant Flash zip through TWRP.
The error i get is failed Sym link. Some Simlinks failed.??
Click to expand...
Click to collapse
It say symlinks fail or it say script updater fail ?
Try install my twrp from RR rom v5.4.0 CM5.1 base
Let me check about 2days cause im not near my copmputer
Sent from my Xperia ZR using XDA Free mobile app

uncomment said:
It say symlinks fail or it say script updater fail ?
Try install my twrp from RR rom v5.4.0 CM5.1 base
Let me check about 2days cause im not near my copmputer
Sent from my Xperia ZR using XDA Free mobile app
Click to expand...
Click to collapse
Okay, so this is what it says.
Symlink: Some symlinks failed
E: Error executing updater binary in zip.
Used TWRP from RR rom v5.4.0 and got the same error.
I also tried flashing with old Twrp. It didn't work.

Fixed for Rom zip
Shray said:
Okay, so this is what it says.
Symlink: Some symlinks failed
E: Error executing updater binary in zip.
Used TWRP from RR rom v5.4.0 and got the same error.
I also tried flashing with old Twrp. It didn't work.
Click to expand...
Click to collapse
I checked: my zip upload is old script-updater
TO fixed:
- download script-updater below and rename it by delete .zip
- Use 7zip on your PC to open rom zip and follow path:
omni-5.1-20150330-dogo-EXPERIMENTAL.zip\META-INF\com\google\android\
- Replace updater-script in zip by: Drag new updater-script from Explorer to zip
- Done!
Sorry for my fault! :angel:

uncomment said:
I checked: my zip upload is old script-updater
TO fixed:
- download script-updater below and rename it by delete .zip
- Use 7zip on your PC to open rom zip and follow path:
omni-5.1-20150330-dogo-EXPERIMENTAL.zip\META-INF\com\google\android\
- Replace updater-script in zip by: Drag new updater-script from Explorer to zip
- Done!
Sorry for my fault! :angel:
Click to expand...
Click to collapse
Its all okay, mate. Its how things progress.
Also, thank you for providing the steps for the fix.
I tried them just as you mentioned (exactly word to word) and this is what i got.
Formatting /system
Mount: failed to mount /dev/block/platform/msm_sdcc.1/by-name/system at /system: device or resource busy
Symlinking
Symlink: some symlinks failed
E: Error executing updater binary in zip
Tried with some variations and still got the same message.

Shray said:
Its all okay, mate. Its how things progress.
Also, thank you for providing the steps for the fix.
I tried them just as you mentioned (exactly word to word) and this is what i got.
Formatting /system
Mount: failed to mount /dev/block/platform/msm_sdcc.1/by-name/system at /system: device or resource busy
Symlinking
Symlink: some symlinks failed
E: Error executing updater binary in zip
Tried with some variations and still got the same message.
Click to expand...
Click to collapse
Enter twrp and tick mount system. Try it again. I did it before show you how to fix
Sent from my Xperia ZR using XDA Free mobile app

uncomment said:
Enter twrp and tick mount system. Try it again. I did it before show you how to fix
Sent from my Xperia ZR using XDA Free mobile app
Click to expand...
Click to collapse
I tried it, again.
Checked that the system is mounted and flashed the Rom.
This time its able to extract the system but some symlinks still fail and the error is still the same (E: error executing UPDATER BINARY in zip)
I deleted the extension (.zip) from the file you uploaded before using 7zip to replace it.

Shray said:
I tried it, again.
Checked that the system is mounted and flashed the Rom.
This time its able to extract the system but some symlinks still fail and the error is still the same (E: error executing UPDATER BINARY in zip)
I deleted the extension (.zip) from the file you uploaded before using 7zip to replace it.
Click to expand...
Click to collapse
Oh, it like as be crazy! I check script again and see it call mount program from sbin but not found
Forget it! Hope you enjoy with resurrection remix 5.4.0
Olivier release new omni 5.1 with video fix. I will do it later.
Thank you for testing!
Sent from my Xperia ZR using XDA Free mobile app

uncomment said:
Oh, it like as be crazy! I check script again and see it call mount program from sbin but not found
Forget it! Hope you enjoy with resurrection remix 5.4.0
Olivier release new omni 5.1 with video fix. I will do it later.
Thank you for testing!
Sent from my Xperia ZR using XDA Free mobile app
Click to expand...
Click to collapse
Anytime.
Thanks again for RR.

uncomment said:
Oh, it like as be crazy! I check script again and see it call mount program from sbin but not found
Forget it! Hope you enjoy with resurrection remix 5.4.0
Olivier release new omni 5.1 with video fix. I will do it later.
Thank you for testing!
Sent from my Xperia ZR using XDA Free mobile app
Click to expand...
Click to collapse
I'm not sure if it was my mistake or TWRP had problems while installing.
I flashed TWRP 2.8.5.0 (Uploaded by you previously) and tried flashing again Omni 5.1.
This time it worked.

Shray said:
I'm not sure if it was my mistake or TWRP had problems while installing.
I flashed TWRP 2.8.5.0 (Uploaded by you previously) and tried flashing again Omni 5.1.
This time it worked.
Click to expand...
Click to collapse
Thank for testing.
I will not upload AOSP rom more. For me it less bug but not much options for me like CM base rom.

Installation aborted while flashing .zip~ with Xposed

Hello,
Im pretty new to this kind of stuff. So forgive me. I've Nexus 4 device, and got tired of mobile radio active bug.
Android verions 5.1.1
Looked everywhere for the fix and cried on gogole bug report page.
Now i found information about this xposed module, and mobile radio active fix on this forum.
Ive rooted my device. (confirmed with root checker app)
I had custom recovery: clockworkmod recovery v6.0.4.7 (later switched to openrecovery-twrp-2.8.5.2-mako to test and stayed on it )
From this page http://forum.xda-developers.com/showthread.php?t=3034811
i have installed XposedInstaller_3.0_alpha4.apk
App requires (red text) to flash the package, so i am putting this .zip (xposed-v75-sdk22-x86.zip) on my device and trying to flash it through recovery.
chosing it, process starts, and ill write you everything it says
(that is clockworkmod recovery log)
-- Installing /sdcard/0/xposed-v75-sdk22-x86.zip
Finding update package...
Opening update package...
Installing update...
E:Error in /data/media/0/xposed-v75-sdk22-x86.zip
(Status 255)
Installation aborted
tried many times, redownloading the file, renaming it to a.zip
same message every time.
I have also switched to
openrecovery-twrp-2.8.5.2-mako
Tried to flash it using this.
Also error:
updating partition details...
.. done
Full SELinux support is present
MTP Enabled
Installing '/sdcard/xposed-v75-sdk22-x86.zip'...
Checking for MD5 file...
Skipping MD5 check: No MD5 file found
E: Error executing updater binary in zip " /sdcard/xposed-v75-sdk22-x86.zip'
Error flashing zip ' /sdcard/xposed-v75-sdk22-x86.zip'
Updating partition details...
... done
Comment below box "FAILED" (red color)
clicked wipe cache/dalvik
reflashed and getting same error
Am i doing something wrong? Ive no idea what to do, whats the problem. Or maybe some of you had same issue and figured out how to deal with it?
Any answer appreciated.
Thank you.
~~~~~~~~~~~~~~
Out of topic question:
Does Cyanogenmod have this mobile radio active fixed? I'd just switch to it if theres no way installing xposed on my nexus 4 with stock adroid)

The Nexus 4 has an ARM processor, and you're trying to flash the zip for an x86 processor. The flash is failing in order to stop you from putting the wrong software on there.
Try again with the xposed-v75-sdk22-arm.zip file. This was explained repeatedly in the first two posts of the official discussion thread.

I can see now where i've done it wrong after re-reading that post knowing what you just told me.
Must've been some weird article about nexus 4 and its processor that led me to think my processor is 32bit and i thought its ok to use x86 file even tho it says ARM everywhere. And trusted it more over the chart in the main discussion topic.
Everything comes down to my lack of knowledge.
Thank you for your patience and help.
flashed ARM file and it worked perfectly
Topic to be closed.
Thanks again!