network problem - Galaxy S Advance I9070 Q&A, Help & Troubleshooting

was on gingerbread DDLK baseband..rooted and installed cm10.2 and cm10.1..but network nit available.. radio is off while doing *#*#4636#*#*
is this a baseband problem? will ICS work? can somebody give me cwm flashable baseband? at least Odin work? somebody give me links for GB and JB..hotfile link not working

ajeesh vijayan said:
was on gingerbread DDLK baseband..rooted and installed cm10.2 and cm10.1..but network nit available.. radio is off while doing *#*#4636#*#*
is this a baseband problem? will ICS work? can somebody give me cwm flashable baseband? at least Odin work? somebody give me links for GB and JB..hotfile link not working
Click to expand...
Click to collapse
Did you do factory reset? And wiped cache and dalvik cache? We do not have ICS, for fw you look on samsung-updates.com
Sent from my GT-I9070 using Tapatalk

shut_down said:
Did you do factory reset? And wiped cache and dalvik cache?
Click to expand...
Click to collapse
Hello!
I have the same trouble. I've done factory reset, wiped data, cache, dalvik but network does not do anything... I restored stock rom from samsung-updates with Odin, but dont boot up. Then I tried again cyanogenmod but the network is off again...
Any idea?

robiroby said:
Hello!
I have the same trouble. I've done factory reset, wiped data, cache, dalvik but network does not do anything... I restored stock rom from samsung-updates with Odin, but dont boot up. Then I tried again cyanogenmod but the network is off again...
Any idea?
Click to expand...
Click to collapse
When you downgrade with Odin, after instalation is done go to recovery mode and do factory reset again. I am not sure what cause that problem on CM, I read some users from Argentina had problem with it.
Послато са GT-I9070 уз помоћ Тапатока

shut_down said:
When you downgrade with Odin, after instalation is done go to recovery mode and do factory reset again. I am not sure what cause that problem on CM, I read some users from Argentina had problem with it.
Послато са GT-I9070 уз помоћ Тапатока
Click to expand...
Click to collapse
Ooooh! Its work!!! The stock ROM is work!!! Million thanks!!! :victory:

Related

BRICKED on CM9

I was on LJ6 and I rooted . When I install the CM9, i am stupid using the CWM to flash .. now no matter which rom i flashed , it still keep looping
I can still enter to CWM and download mode .
Need ur help ... Thanks
minicris said:
I was on LJ6 and I rooted . When I install the CM9, i am stupid using the CWM to flash .. now no matter which rom i flashed , it still keep looping
I can still enter to CWM and download mode .
Need ur help ... Thanks
Click to expand...
Click to collapse
Pc odin
Sent from my GT-N7000 using Tapatalk 2
so you arent bricked then
if you can bet into cwr to install a gb kernel then rstoire if not you wil lneed to use pc odin to flash a rom
Did you wipe cache, dalvik, and factory reset?
Upgrading from GB to ICS will usually loop if you don't reset the phone.
Do not wipe cache, dalvik, or factory reset
In fact, stay away from CWM and use PC-Odin to flash a stock image.
Azeazezar said:
Do not wipe cache, dalvik, or factory reset
In fact, stay away from CWM and use PC-Odin to flash a stock image.
Click to expand...
Click to collapse
I TRY FLASHED THE STOCK ROM KJ6,LA2
it still looping .....
Try this, worked for me
http://forum.xda-developers.com/showpost.php?p=25925185&postcount=46
Richy99 said:
so you arent bricked then
if you can bet into cwr to install a gb kernel then rstoire if not you wil lneed to use pc odin to flash a rom
Click to expand...
Click to collapse
how to install a GB kernel? do i need to find a pre-rooted GB kernel ?
ioluas said:
Try this, worked for me
http://forum.xda-developers.com/showpost.php?p=25925185&postcount=46
Click to expand...
Click to collapse
where did u get the files ?
RickR78 said:
Did you wipe cache, dalvik, and factory reset?
Upgrading from GB to ICS will usually loop if you don't reset the phone.
Click to expand...
Click to collapse
IT WORK AGAIN AFTER
I WIPE THE CACHE,dalvik
IT WORK AGAIN
THANKS SO MUCH
minicris said:
IT WORK AGAIN AFTER
I WIPE THE CACHE,dalvik
IT WORK AGAIN
THANKS SO MUCH
Click to expand...
Click to collapse
oh yeah we understand your emotions
but you did not brick at all in the first place!
title to be changed. \reported
Thread closed
Solution was found, no need for more.

[Q] problem with setup wizard

Now my setup wizard doesnt run anymore after froze it, already did everything, like reflash, defrost, wipe dalvik/cache, but the result still same, can someone help me out?
fongandy said:
Now my setup wizard doesnt run anymore after froze it, already did everything, like reflash, defrost, wipe dalvik/cache, but the result still same, can someone help me out?
Click to expand...
Click to collapse
But you didn't flash your stock firmware with Odin? And do factory reset after.
shut_down said:
But you didn't flash your stock firmware with Odin? And do factory reset after.
Click to expand...
Click to collapse
Already do that too, but i wil try that again and tell you the result
ok, still not work, any other ideas?
fongandy said:
ok, still not work, any other ideas?
Click to expand...
Click to collapse
I just can't think of more idea if flashin stock firmware with Odin do not work.
shut_down said:
I just can't think of more idea if flashin stock firmware with Odin do not work.
Click to expand...
Click to collapse
all i know if i flash stock firmware, it will work again, but not work for me, what happen to my SGSA, i just frost it, and this weird thing happen
dou you have error in setup wizard after flashing? mine was "unfortunately, samsung setup wizard has stoped" or-and "unfortunately, com.google.process.gappss" i was upgrading to JB4.1.2 but i cant move pass this error and i go back to language chooser again and again...
i got that error to before, i think you can pass that if you reflash and do factory reset
fongandy said:
i got that error to before, i think you can pass that if you reflash and do factory reset
Click to expand...
Click to collapse
i did try that but still the same error... tried dl new one ply or plz but still the same error pops and cant finish the setup... another, in wifi setup, chose wifi but no onscreen keyboard moves up... i think its googles error process.gappss
ianmcgui said:
i did try that but still the same error... tried dl new one ply or plz but still the same error pops and cant finish the setup... another, in wifi setup, chose wifi but no onscreen keyboard moves up... i think its googles error process.gappss
Click to expand...
Click to collapse
Try to flash kernel with CWM, ThunderZap. Then try to install Supressed ROM in CWM. See what happends.
You need ADB for installing kernel. http://forum.xda-developers.com/showthread.php?t=879701
ADB shell should work when you get to that screen of Wizzard. You are in system then.
P.S. In cwm wipe: system, cache, dalvik cache, and do factory reset before instaling Supressed ROM.
shut_down said:
Try to flash kernel with CWM, ThunderZap. Then try to install Supressed ROM in CWM. See what happends.
You need ADB for installing kernel. http://forum.xda-developers.com/showthread.php?t=879701
ADB shell should work when you get to that screen of Wizzard. You are in system then.
P.S. In cwm wipe: system, cache, dalvik cache, and do factory reset before instaling Supressed ROM.
Click to expand...
Click to collapse
Already try that first before you tell shut, anddddd...it works, like a charm
Even my setup wizard run again, i don't know if i reflash the rom, the setup will run or not, but for now, it works
fongandy said:
Already try that first before you tell shut, anddddd...it works, like a charm
Even my setup wizard run again, i don't know if i reflash the rom, the setup will run or not, but for now, it works
Click to expand...
Click to collapse
It should work. If not redownload stock firmware. Maybe that file is corrupted - that provide wizzard.
shut_down said:
It should work. If not redownload stock firmware. Maybe that file is corrupted - that provide wizzard.
Click to expand...
Click to collapse
Just tried flash with stock jb, the setup wizard not work, it's only work with custom rom but i want to go back to stock rom
fongandy said:
Just tried flash with stock jb, the setup wizard not work, it's only work with custom rom but i want to go back to stock rom
Click to expand...
Click to collapse
Unpack system\app\SetupWizard.apk from ROM, go to recovery - mount System. Then push SetupWizard.apk from ROM to your stock.
shut_down said:
Unpack system\app\SetupWizard.apk from ROM, go to recovery - mount System. Then push SetupWizard.apk from ROM to your stock.
Click to expand...
Click to collapse
Ok thanks shut, will try that, but with what recovery i do that? CWM? That's mean when i want to go back to stock, i always have to do this?
fongandy said:
Ok thanks shut, will try that, but with what recovery i do that? CWM? That's mean when i want to go back to stock, i always have to do this?
Click to expand...
Click to collapse
No. Do one time. Root it, install kernel with CWM. Then backup that stock with custom kernel. Then you will have backup of that. And you can restore whenever you want.
shut_down said:
No. Do one time. Root it, install kernel with CWM. Then backup that stock with custom kernel. Then you will have backup of that. And you can restore whenever you want.
Click to expand...
Click to collapse
Hi there,
i found that i having the same problem. may i know is it flash the kernel the setupwizard will work again? or i need to flash custom rom?
thanks in advance.
J4MESHCH said:
Hi there,
i found that i having the same problem. may i know is it flash the kernel the setupwizard will work again? or i need to flash custom rom?
thanks in advance.
Click to expand...
Click to collapse
ROM, kernel have nothing to do with this problem.
Послато са GT-I9070 користећи Тапаток 2
Me too
Sent from my GT-I9070 using xda app-developers app
ftheriau01 said:
Me too
Sent from my GT-I9070 using xda app-developers app
Click to expand...
Click to collapse
There are explanations for this problem. Try some custom ROM, if you do not want it flash stock after that.

Wifi Broken After 4.1.2 Official update

I got a big problem!
After updating my S Advance to 4.1.2 my wifi stop working suddenly. (yes i did the correct update last Netherlands Rom)
After downgrading back to 2.3.6 still have the same issue so i tried *#*#526#*#* and it says " NulSet Driver
Is this fixable, if yes how?
RDilus said:
I got a big problem!
After updating my S Advance to 4.1.2 my wifi stop working suddenly. (yes i did the correct update last Netherlands Rom)
After downgrading back to 2.3.6 still have the same issue so i tried *#*#526#*#* and it says " NulSet Driver
Is this fixable, if yes how?
Click to expand...
Click to collapse
Once you updated to Jelly Bean, did you do a factory reset??
Abhinandh Ajay said:
Once you updated to Jelly Bean, did you do a factory reset??
Click to expand...
Click to collapse
yep i always do that after updating
flash FULL 2.3.6 ROM via odin
wipe dalvik, wipe cache
do factory reset
(do not try to use kies )
send from GT-P1000 with Tapatalk 2
pawelarc said:
flash FULL 2.3.6 ROM via odin
wipe dalvik, wipe cache
do factory reset
(do not try to use kies )
send from GT-P1000 with Tapatalk 2
Click to expand...
Click to collapse
did that already (odin ofcourse) but did nothing

Cleaners

Is there a kernel or ROM cleaner for the s advance?
As the ones I've used or know about (so far) are specific to phone models.
---
smash'n
s_m_a_s_h said:
Is there a kernel or ROM cleaner for the s advance?
As the ones I've used or know about (so far) are specific to phone models.
---
smash'n
Click to expand...
Click to collapse
What is cleaner? Going back to stock? You can flash stock firmeare, and you get all stock.
Послато са GT-I9070 користећи Тапаталк 4
shut_down said:
What is cleaner? Going back to stock? You can flash stock firmeare, and you get all stock.
Послато са GT-I9070 користећи Тапаталк 4
Click to expand...
Click to collapse
Kernel & ROM cleaners (used before flashing a new kernel or ROM)
---
smash'n
s_m_a_s_h said:
Kernel & ROM cleaners (used before flashing a new kernel or ROM)
---
smash'n
Click to expand...
Click to collapse
From my experience with this phone, when you install kernel everything from old is gone. And when you want to clean install ROM you do factory reset, wipe cache, dalvik cache and you can wipe system. Never used any cleaner.
shut_down said:
From my experience with this phone, when you install kernel everything from old is gone. And when you want to clean install ROM you do factory reset, wipe cache, dalvik cache and you can wipe system. Never used any cleaner.
Click to expand...
Click to collapse
Yep, you're right (they're proved text book maneovures) but on some specific phone models developers go a few steps further and dev scripts (flashable zip files to be used before changing the kernel or ROM) that deep clean/wipe reminent files/folders' such data left behind by old kernels and ROMs; or they have done for the S2 etc to date.
I thought maybe there was something similar for the s advance. I guess not.
It was just a query.
---
smash' n

cant install any other rom except ultimatum

i have this strange issue where the phone goes into a bootloop whenever i try to install a cm10/or aosp rom other than ultimatum.
i have not tried stock rom yet or any flash with odin . i wish to solve this problem without odin .
what is the probem here anyone knows and how to solve it?
Magpir said:
i have this strange issue where the phone goes into a bootloop whenever i try to install a cm10/or aosp rom other than ultimatum.
i have not tried stock rom yet or any flash with odin . i wish to solve this problem without odin .
what is the probem here anyone knows and how to solve it?
Click to expand...
Click to collapse
i think flashing stock rom will definitely solve this problem
aditya rathee said:
i think flashing stock rom will definitely solve this problem
Click to expand...
Click to collapse
Can I use stock custom Rom??
Magpir said:
Can I use stock custom Rom??
Click to expand...
Click to collapse
yes you can
So now I just wipe device in cwm normal way and flash a stock based custom Rom right.
Sent from my HTC One using Tapatalk
hi ther ei just tried, still bootloop, problem not solved
Magpir said:
hi ther ei just tried, still bootloop, problem not solved
Click to expand...
Click to collapse
Usually first boot in cm10 is taking a long time, but if you already know that, have you tried doing a complete wipe(wipe data/factory reset, wipe cache, wipe dalvik cache) before install any custom rom?
Sent from my GT-S5830 using Tapatalk 2
Gilang555 said:
Usually first boot in cm10 is taking a long time, but if you already know that, have you tried doing a complete wipe(wipe data/factory reset, wipe cache, wipe dalvik cache) before install any custom rom?
Sent from my GT-S5830 using Tapatalk 2
Click to expand...
Click to collapse
Yes I did. I didn't use cm 10 Rom ,only cm 7
Magpir said:
Yes I did. I didn't use cm 10 Rom ,only cm 7
Click to expand...
Click to collapse
yes i know you aren't using cm10, but you say that you are trying to install cm10..
what i'm trying to say about cm10 is that I'm afraid you assume it is bootloop when it is not, just have to wait longer,,,

Categories

Resources