Related
I tried to install the custom rom "AndroidParanoid"
with Rom Stock 4.1.2 XXLQE
and meanwhile the install its wrote: Installation Aborted
why ?
i really want this rom , its the perfect rom for me !
ReaLioR said:
I tried to install the custom rom "AndroidParanoid"
with Rom Stock 4.1.2 XXLQE
and meanwhile the install its wrote: Installation Aborted
why ?
i really want this rom , its the perfect rom for me !
Click to expand...
Click to collapse
Have you rooted your phone? Also you need custom recovery such as cwm to flash paranoid.
Here is the guide for rooting and installing temporary cwm on your phone.
Hope this helps.
arffrhn said:
Have you rooted your phone? Also you need custom recovery such as cwm to flash paranoid.
Here is the guide for rooting and installing temporary cwm on your phone.
Hope this helps.
Click to expand...
Click to collapse
Yes my phone is rooted
and i used CWM ...
Hmm this is PA 3.60. That issue is known and this rom is still not for daily use man. If you want something 4.2.2 go look for pac-man or cm10.1. If you still want PA, you can check out pa 2.99 thread.
arffrhn said:
Hmm this is PA 3.60. That issue is known and this rom is still not for daily use man. If you want something 4.2.2 go look for pac-man or cm10.1. If you still want PA, you can check out pa 2.99 thread.
Click to expand...
Click to collapse
oh i didnt saw this thread :silly:
thank you very much !
PROBLEM SOLVED
arffrhn said:
Hmm this is PA 3.60. That issue is known and this rom is still not for daily use man. If you want something 4.2.2 go look for pac-man or cm10.1. If you still want PA, you can check out pa 2.99 thread.
Click to expand...
Click to collapse
sorry on the double post
but , how can i put the Nexus buttons in PA ?
this is only for PA 3.60 ? or its works on 2.99 too ?
i dont have problem to install 3.60 , because i really want this nexus buttons
ReaLioR said:
sorry on the double post
but , how can i put the Nexus buttons in PA ?
this is only for PA 3.60 ? or its works on 2.99 too ?
i dont have problem to install 3.60 , because i really want this nexus buttons
Click to expand...
Click to collapse
About that, I can't help you cause I've never tried PA. Maybe someone else can answer this for you.
When I install a custom ROM like cyanogen and AOKP I have a problem with the two capacitive buttons, they do not light at all. They are dead.. Any solution to this?
Now I use maclaw's AOKP 4.2.2
Thanks in advance!
Antialize said:
When I install a custom ROM like cyanogen and AOKP I have a problem with the two capacitive buttons, they do not light at all. They are dead.. Any solution to this?
Now I use maclaw's AOKP 4.2.2
Thanks in advance!
Click to expand...
Click to collapse
Try rebooting or wait awhile
AssToast said:
Try rebooting or wait awhile
Click to expand...
Click to collapse
I have the same problem. I try to clear chace and dalvik, reboot and waiting all day but the capacitive buttton still dead. is there another way to solve this problem?
Sorry my english, still learning
it happened to me i thought it's a CWM bug, it's just a Samsung bug, reboot using the power button and it will make alright to work!
enensales said:
it happened to me i thought it's a CWM bug, it's just a Samsung bug, reboot using the power button and it will make alright to work!
Click to expand...
Click to collapse
I rebooted a lot of times and waited and couple of minutes.. now i am back to stock
i will test the latest updates of AOKP or CM and we will see!!
Nothing happend again with the new update!!!
Maclaw Some HELP pls!!
I flash with TWRP and I have option on the stock for the buttons to stay only some secs on!!
Any SOLUTION HELP!
Also i cant restore only my data!! The phone is stuck in the cyanogen logo for a lot of time!!!
HELP I WANT A CUSTOM ROM!
Antialize said:
Nothing happend again with the new update!!!
Maclaw Some HELP pls!!
I flash with TWRP and I have option on the stock for the buttons to stay only some secs on!!
Any SOLUTION HELP!
Also i cant restore only my data!! The phone is stuck in the cyanogen logo for a lot of time!!!
HELP I WANT A CUSTOM ROM!
Click to expand...
Click to collapse
Me too. I think it was bug on our phone. :crying:
Wrong Thread
anyone managed menu and back buttons to work on CM ?
Ok, let's deal with it.
I need your:
- model (i8190/n/l)
- country
- baseband
Maybe we can figure on which phones problem exists and then eliminate them.
New Macław said:
Ok, let's deal with it.
I need your:
- model (i8190/n/l)
- country
- baseband
Maybe we can figure on which phones problem exists and then eliminate them.
Click to expand...
Click to collapse
i8190
GR
I8190XXAMD3
also tried over I8190XXAMG4_I8190OXXAMH1
I have the same codes
I8190
Gr
Amd3
New Macław said:
Ok, let's deal with it.
I need your:
- model (i8190/n/l)
- country
- baseband
Maybe we can figure on which phones problem exists and then eliminate them.
Click to expand...
Click to collapse
- model: i8190
- country: XSE - Indonesia
- baseband: I8190DXAMA2 (I have tried I8190DXAMA3 & I8190DXAMB1)
would be great if you fix our problem. Thanks Maclaw Team
irufun said:
- model: i8190
- country: XSE - Indonesia
- baseband: I8190DXAMA2 (I have tried I8190DXAMA3 & I8190DXAMB1)
would be great if you fix our problem. Thanks Maclaw Team
Click to expand...
Click to collapse
I HAVE THE SAME ERROR
i8190
tHX from germany
Try the newest cm 10.1 from maclaw. In the settings you can turn on the 'backlight' : homescreen>>press menu button>> system settings>> advanced settings >> make sure the option to disable it is turned OFF.
I'm sorry if it's not relevant.
Sent from my GT-I8190 using xda app-developers app.
this option is grayedout (unavailable). I bet is bug in custom recoveries (cwm and twrp) - because bug exist even if flash only recovery, (odin or from rom manager), without flashing any new rom. But on stock rom bug disappeard after some minutes.
my model is 8190N, poland.
Please Dev's, find solution for us.
danielsinnema said:
Try the newest cm 10.1 from maclaw. In the settings you can turn on the 'backlight' : homescreen>>press menu button>> system settings>> advanced settings >> make sure the option to disable it is turned OFF.
I'm sorry if it's not relevant.
Sent from my GT-I8190 using xda app-developers app.
Click to expand...
Click to collapse
that's for backlight, not for capacitive button. I have tried
same error
- model I8190L
- country BRAZIL
- baseband I8190LUBAMB1
thanks!
-model i8190
-GR
- 4.1.2 xxamg4 but have tried any other stock firmware. soft keys just wont work on a custom rom...
we will never be alone
Hy all.
I've been watching this board for quite a long time but in the end I decide to ask for advice from someone that knows.
I'm searching for ideal rom that has working device parts like tv-out. I kinda dount I'll find any 4.3 tom with this feature if not pease suggest me some other latest build. I tried sevral latest rom on CM base (CM 10.1, 10.2 Slim beam 4.2.2 4.3, C-rom v4) but with no luck, thus many of those are very buggy in basic operatios. Currently using updated Helly Bean 4.3.
Thanks
CM currently doesn't have DeviceParts working. And because a lot of 4.3 roms draw from CM sources, none of them will have that feature fully working.
Odd though, CM10.1 and Slim 4.2.2 should have it working
Sent from my GT-P7510 using Tapatalk HD
Soryuu said:
CM currently doesn't have DeviceParts working. And because a lot of 4.3 roms draw from CM sources, none of them will have that feature fully working.
Odd though, CM10.1 and Slim 4.2.2 should have it working
Sent from my GT-P7510 using Tapatalk HD
Click to expand...
Click to collapse
Thanks for respond Soryuu, I see your point but I was unable to make DeviceParts working on Cm 10.1 and slim 4.2.2. though I really like every rom I tried (might be cause I'm still new ith those ).
I'm lost...
But when i`m using CM 10.1.2 stable the deviceparts worked as well ... what was your prob???
elektroda said:
Thanks for respond Soryuu, I see your point but I was unable to make DeviceParts working on Cm 10.1 and slim 4.2.2. though I really like every rom I tried (might be cause I'm still new ith those ).
I'm lost...
Click to expand...
Click to collapse
freakymod2120 said:
But when i`m using CM 10.1.2 stable the deviceparts worked as well ... what was your prob???
Click to expand...
Click to collapse
When I connect phone with tv with cable, I just can't enable tv.out setting under menu, it stays gray. Cable is fine, I've been using it with my very old rom (2.2) before and decide to refresh my rom, that is why I asked in the first place.
Am I missing something or?
Okay i think you should report it here ...
http://forum.xda-developers.com/showthread.php?t=2039755&page=569
elektroda said:
When I connect phone with tv with cable, I just can't enable tv.out setting under menu, it stays gray. Cable is fine, I've been using it with my very old rom (2.2) before and decide to refresh my rom, that is why I asked in the first place.
Am I missing something or?
Click to expand...
Click to collapse
freakymod2120 said:
Okay i think you should report it here ...
http://forum.xda-developers.com/showthread.php?t=2039755&page=569
Click to expand...
Click to collapse
I probabl should, but I don't bave privilegies to post in dev section. Othervise I would share my experience and report qute few bugs with different roms which could help solving them.
elektroda said:
I probabl should, but I don't bave privilegies to post in dev section. Othervise I would share my experience and report qute few bugs with different roms which could help solving them.
Click to expand...
Click to collapse
Just keep posting and helping others in the Q and A section, you'll get to your ten posts in no time don't spam though, that doesn't go down well...
But once you do have ten posts, as freakymod said report this in the dev thread and see if someone knows what's going on.
Sent from my GT-P7510 using Tapatalk HD
Ah okay sorry i haven`t that you have <10 postings ,sorry...
Maybe you can describe the bug or missing function and i post it in teh dev thread for you ...
elektroda said:
I probabl should, but I don't bave privilegies to post in dev section. Othervise I would share my experience and report qute few bugs with different roms which could help solving them.
Click to expand...
Click to collapse
Alright, thank you both. I'll probably do that. Freaky I'll send you PM so that way we could rool things up a bit.
Cheers
Okay no prob i wait for the PM ...:good:
elektroda said:
Alright, thank you both. I'll probably do that. Freaky I'll send you PM so that way we could rool things up a bit.
Cheers
Click to expand...
Click to collapse
Hi,
I have a problem with all the custom roms. the sensitive buttons don't work.
I tried all Maclaw's roms and Virginity V3 but i have always this issue.
when i come back to the stock rom, it works.
I think the problem come from the kernel : i tried the Virginity Kernel V3 on my rom stock just rooted, it don't work neither.
can anybody help me ?
rzit said:
Hi,
I have a problem with all the custom roms. the sensitive buttons don't work.
I tried all Maclaw's roms and Virginity V3 but i have always this issue.
when i come back to the stock rom, it works.
I think the problem come from the kernel : i tried the Virginity Kernel V3 on my rom stock just rooted, it don't work neither.
can anybody help me ?
Click to expand...
Click to collapse
go to official stock rom and if problem exists its problem with hardware
eswarvf said:
go to official stock rom and if problem exists its problem with hardware
Click to expand...
Click to collapse
Thank you but everything is fine on stock rom.
i've this problem when i try custom roms only.
rzit said:
Thank you but everything is fine on stock rom.
i've this problem when i try custom roms only.
Click to expand...
Click to collapse
Reroot ur phone and flash
Remember do your own experiments on your phone because its yours
So find a solution by yourself because no one has this problem
Blame Samsung I read somewhere that our phone got this problem
So try and try until u get it
i'm sorry to say you can't do anything about it... neither a developer can, as far as i know.. about 5% of s3 minis have this problem.... you just live with it, i do too
rzit said:
Hi,
I have a problem with all the custom roms. the sensitive buttons don't work.
I tried all Maclaw's roms and Virginity V3 but i have always this issue.
when i come back to the stock rom, it works.
I think the problem come from the kernel : i tried the Virginity Kernel V3 on my rom stock just rooted, it don't work neither.
can anybody help me ?
Click to expand...
Click to collapse
Install corssbreeder then install root cleaner do a full clean & try again
xAbsoLx said:
Install corssbreeder then install root cleaner do a full clean & try again
Click to expand...
Click to collapse
I tried, but it doesn't work for me.
alexvv said:
i'm sorry to say you can't do anything about it... neither a developer can, as far as i know.. about 5% of s3 minis have this problem.... you just live with it, i do too
Click to expand...
Click to collapse
i knew it ! I've never been lucky.
thank you all anyway !
Hello guys
Recently I unlocked the phone bootloader , rooted and installed a new ROM ..
But when I get a notification sometimes , a high pitch buzz sound comes out of the speaker and at the same time I discovered that the earphone Jack doesn't work anymore
This didn't happen before I installed the new ROM so I thought I install another ROM but it occurred on the new ROM too
Thanks for your help
aliess said:
Hello guys
Recently I unlocked the phone bootloader , rooted and installed a new ROM ..
But when I get a notification sometimes , a high pitch buzz sound comes out of the speaker and at the same time I discovered that the earphone Jack doesn't work anymore
This didn't happen before I installed the new ROM so I thought I install another ROM but it occurred on the new ROM too
Thanks for your help
Click to expand...
Click to collapse
What rom did you install?
First time I installed AOKP rom with Doomloard kernel and now I am on slim kat rom
aliess said:
First time I installed AOKP rom with Doomloard kernel and now I am on slim kat rom
Click to expand...
Click to collapse
Okay, try this.
Put slimkat rom in external sd.
then put your phone in recovery>Wipe cache partition>wipe dalvik cache>wipe system>install slimkat>reboot
androidtweaker1 said:
Okay, try this.
Put slimkat rom in external sd.
then put your phone in recovery>Wipe cache partition>wipe dalvik cache>wipe system>install slimkat>reboot
Click to expand...
Click to collapse
Sorry but that didn't help , the problem still exists ,can this be a hardware problem ? Something wrong with the headphone jack? Should I flash the custom ROM to be sure ?
aliess said:
Sorry but that didn't help , the problem still exists ,can this be a hardware problem ? Something wrong with the headphone jack? Should I flash the custom ROM to be sure ?
Click to expand...
Click to collapse
Try CM11 and check whether the issue continues
It's a known issue with AOSP based roms
NeophyteGS2 said:
It's a known issue with AOSP based roms
Click to expand...
Click to collapse
I did not face that issues when i flashed cm11 or aokp
It's not a constant buzz, only briefly every so often. I'm not sure whether it's because older blobs are used or because of cm itself
NeophyteGS2 said:
It's not a constant buzz, only briefly every so often. I'm not sure whether it's because older blobs are used or because of cm itself
Click to expand...
Click to collapse
Give paranoid android a try
androidtweaker1 said:
Give paranoid android a try
Click to expand...
Click to collapse
What's it like stability wise?
NeophyteGS2 said:
What's it like stability wise?
Click to expand...
Click to collapse
I had used it briefly, was quite stable
I installed a stock based ROM and all the problems disappeared , I am never installing AOSP ROMs again
aliess said:
I installed a stock based ROM and all the problems disappeared , I am never installing AOSP ROMs again
Click to expand...
Click to collapse
:good: