Database Develop

[Q] Questions About ROMs & Kernels..

My father has a Galaxy Note. I wanted to install the best ROM (Prefer Light/Lite size) with best Kernel which would give a Good battery life. Any advice ???
I've installed Chrack's Lite LC1 ROM (from here) Which has Franco kernel 9. But, having a few problems. Can't change Voltages for CPU (Using Voltage Control & SetCPU), The options are missing or Disabled. Having FCs while calling someone using phone dialer ("com.android.phone" FC), Network goes down & comes back later. Any way to fix these ???
Thanks...

It's all about cassie x with Franco test build . MAGIC.
Sent from my GT-N7000 using Tapatalk

Nobody can say the best rom because everything is best and it completely depends on the user what they like.For example I like darky rom very much and others may dislike it.
Maybe the OC/UV feature is not included in the kernel and there is no need for it because already the note is super snappy.The phone problem maybe due to improper flashing.Try factory reset or flash the rom again.If the problem persist report it on the rom's thread and the dev might try to solve it.

octavian90 said:
It's all about cassie x with Franco test build . MAGIC.
Sent from my GT-N7000 using Tapatalk
Click to expand...
Click to collapse
I'll try that !. Thanks..
But, 4shared download link sucks.. No resume feature..

vijai2011 said:
Nobody can say the best rom because everything is best and it completely depends on the user what they like.For example I like darky rom very much and others may dislike it.
Maybe the OC/UV feature is not included in the kernel and there is no need for it because already the note is super snappy.The phone problem maybe due to improper flashing.Try factory reset or flash the rom again.If the problem persist report it on the rom's thread and the dev might try to solve it.
Click to expand...
Click to collapse
I prefer battery life over performance.. How's DarkyROM 3.3 ICED for Note ???

computechnopro said:
I prefer battery life over performance.. How's DarkyROM 3.3 ICED for Note ???
Click to expand...
Click to collapse
Darky roms are always super snappy and are known for better battery life.My sgs,sgsII and note all runs on darky rom only.If you want a basic install without any themes and only major tweaks go for base roms and if you need pre-themed and fully tweaked go for full rom.I'm sure you will enjoy the rom

[poll] what is the best kernel for the official ics ?

hey guys ,, i have finished all my work on viperx but im having difficulties for finding a suitable kernel to use without getting big battery drain ,,please select wisely ONLY according to battery life :angel:

I just tried Noobys kernel apart from stock one, I sometimes get excelent battery life, using almost 5hours of wifi, like 48 hours, but some days i cant get through the day, I think is related to my installed apps..
I wish i had tried more kernels to help you decide which one to use in your ROM, because im actually using Nemesis 2, but happens that i find both (rom+kernel) very stable for everyday use, and want to keep it like that.

rrgrrg said:
hey guys ,, i have finished all my work on viperx but im having difficulties for finding a suitable kernel to use without getting big battery drain ,,please select wisely ONLY according to battery life :angel:
Click to expand...
Click to collapse
IMO, The most important thing to chose a kernel is first it should stable, then good battery life. For include in your ROM I suggest you use the kernel that stable for everyone. As you know, every device has it own limitation, how high it can handle the clock, how low it can handle the voltage.
Why?
Some user dont know what custom kernel is, and what the advantages and disadvantages if using custom kernel. Some user usually flash and use the ROM as it is. If they flash the ROM and the ROM doesnt stable for them, mostlikely they will say something like "The ROM is not stable, I got SOD" or "This ROM is sucks, often reboot by itself". Yes, they will blame the ROM, whereas actually it because their device cant handle the UV or OC kernel.
Also you can write suggestion to use custom kernel to gain more battery life/performance in your ROM's thread.
The users can easily to flash other kernel that they like after they flash the ROM.
Well, this is just my thought. The decisions is up to you
----------------
as for the poll, I choose ZGK v0.1-beta, coz:
- 200/500/700/1000/1100 (OC not too high so it save, 200 as min clock good battery in deep sleep)
- stock voltage (no SOD)
- stable for my old P970, and battery drain is good enough

t0g3 said:
IMO, The most important thing to chose a kernel is first it should stable, then good battery life. For include in your ROM I suggest you use the kernel that stable for everyone. As you know, every device has it own limitation, how high it can handle the clock, howlow it can handle the voltage.
Why?
Some user dont know what custom kernel is, and what the advantages and disadvantages if using custom kernel. Some user usually flash and use the ROM as it is. If they flash the ROM and the ROM doesnt stable for them, mostlikely they will say something like "The ROM is not stable, I got SOD" or "This ROM is sucks, often reboot by itself". Yes, they will blame the ROM, whereas actually it because their device cant handle the UV or OC kernel.
Also you can write suggestion to use custom kernel to gain more battery life/performance in your ROM's thread.
The users can easily to flash other kernel that they like after they flash the ROM.
Well, this is just my thought. The decisions is up to you
----------------
as for the poll, I choose ZGK v0.1-beta, coz:
- 200/500/700/1000/1100 (OC not too high so it save, 200 as min clock good battery in deep sleep)
- stock voltage (no SOD)
- stable for my old P970, and battery drain is good enough
Click to expand...
Click to collapse
that is what im thinking of , but i need the best out of the kernel ,, hellmanor will help me out on this and with god's will i will release my rom next week probably :victory:

I was using Hellmanor's kernel for some days (Toccata 0.3) and the very was excellent!!! No problem with stability, always go in deep sleep.
Right now Im testing Adagio 0.1a hv
Sent from my LG-P970 using Tapatalk 2

is the viper ROM included any v30c stuff? or only v30b
this time plz release only after thorough testing with all fixes..
Sent from my LG-P970 using xda premium

srikanth_kande said:
is the viper ROM included any v30c stuff? or only v30b
this time plz release only after thorough testing with all fixes..
Sent from my LG-P970 using xda premium
Click to expand...
Click to collapse
currently my rom is based on marvel d ,, i hope N00BY release a deoxeded v30c repack

removed

i think this week i will release my rom ,, it will be using Heuxxx Kernel :good: if he agrees ,if not i will use adaigo stable Hv :fingers-crossed:

Stock rom with V6 Supercharger?

Hello i installed STOCK ICS via kdz flash and now i wanted to know if its usefull to install the supercharger script or not.

Hi. You can use Supercharger of course, but it's a bit harder on ICS as it you have to manually patch service.jar etc.
So I would suggest you to install a stock-based ROM from here in the O2X Development section, for example DjangoManoucheX, LG Fuzion, CivZ Multi Flex, and all the others with the [ICS] pretag. Most of these CONTAIN integrated V6 Superchargers with patched service.jar. They all look and do the same as the stock ICS you just installed, but, in my opinion, they are much smoother, stable, etc. I'm using DjangoManoucheX myself and it's one of the best experiences I've had with my phone.
If you don't want to root or flash a custom ROM, then just follow zeppelinrox's exact instructions in his V6 Supercharger thread to get the full experience. However, it uses too much CPU, as some people stated it in the past weeks, so it may drain your device's battery faster, and other disadvantages. I hope I could help.

Ok thank you. Because of the drain i/we (a friend of me, and me) dont use dmx or other custom roms atm... customroms = gps bugged/bad camera
stock roms drain too much.. i must say the STOCK is really smooth aswell.. but maybe as u said the V6 is draining in the other roms... atm we got ~1.6% bat usage per hour

rockyy said:
Ok thank you. Because of the drain i/we (a friend of me, and me) dont use dmx or other custom roms atm... customroms = gps bugged/bad camera
stock roms drain too much.. i must say the STOCK is really smooth aswell.. but maybe as u said the V6 is draining in the other roms... atm we got ~1.6% bat usage per hour
Click to expand...
Click to collapse
I've got the same drain, I hibernated all the apps with Greenify I could, so there aren't so much things running in the background. Also DMX doesn't use SuperCharger, it's still super smooth. If you don't got any problems with stock ROM's smoothness then dont bother supercharging it IMO, it affects multitasking and a few other things too negatively.

ROM & Kernels ?

I am newbie so please forgive me, Can some one please explain to me what a kernel is and why it matter?
Also say for example I install Werewolf CM10.1 ROM does the kernel also change to WerewolfJB automatically?
Sent from my LG-P880 CarbonRom

Yes because CM Roms run on different kernels and cant be used on stock or stock based kernels. And wise versa. And Kernels are...well not sure how to explain it. Let me try it. Is basically like a transmission. So better the transmission is so better runs and shifts the car. That's basically on a phone the same. Yes the processor is important but the kernel is what makes everything run like it should. I installed a costum kernel because the original one was so bad in battery life and this costum kernel is much better optimized. No more 10 or more % battery drain in standby in an hour. Battery life was pretty terrible on this phone now it is like a fully new phone with ok battery life.
Sent from my LG-P880 using Tapatalk 4

dimension3000 said:
I am newbie so please forgive me, Can some one please explain to me what a kernel is and why it matter?
Also say for example I install Werewolf CM10.1 ROM does the kernel also change to WerewolfJB automatically?
Sent from my LG-P880 CarbonRom
Click to expand...
Click to collapse
The kernel is the core-engine all other software runs on. To make an analogy with a car:
The chassis of the car is the phone, the engine is the kernel and the body is the ROM. This is not a very accurate analogy, but I hope you get the point.
Different kernels focus on different keypoints. Some are very battery-friendly, some favor performance, some offer extra functionality to the system, etc..So there is not a one-size-fits-all perfect kernel.
ROM's are usually based on a certain structure, which the kernel has to support. So for a stock ROM you need a different kernel then for a CM ROM. Most ROM come complete with a kernel, a few don't. So if you flash a ROM which contains it's own kernel you overwrite the kernel that is on your phone. So let's say you've got the Optimus Prime kernel and then install the latest CM build, you overwrite your OP kernel and have to re-flash it after installing the ROM to get it back.In your case the Werewolf CM10.1 ROM comes complete with the Werewolf kernel.
Hope this answers your questions.

[Q]what are the best custom/official rom for best performance and balanced heat

I have been using the stock rom 4.0.3 since I bought the phone since the v10h rom didnt reduced the battery usage and overheating
What are the best rom available or how could I reduce the huge power drain from the battery and dont lose a lot of performance?

If you are looking for a rom that is stable without a lot of hiccups, then I would recommend CM11 as this is by far the most stable rom that I have tried. In terms of performance and heat, you can try to flash Cyodak or iodak thhen use Trickster MOD to undervolt so as to avoid heat. For details you can search for pimp my kernel tread in this forum.

PontiacGTX said:
I have been using the stock rom 4.0.3 since I bought the phone since the v10h rom didnt reduced the battery usage and overheating
What are the best rom available or how could I reduce the huge power drain from the battery and dont lose a lot of performance?
Click to expand...
Click to collapse
b886b said:
If you are looking for a rom that is stable without a lot of hiccups, then I would recommend CM11 as this is by far the most stable rom that I have tried. In terms of performance and heat, you can try to flash Cyodak or iodak thhen use Trickster MOD to undervolt so as to avoid heat. For details you can search for pimp my kernel tread in this forum.
Click to expand...
Click to collapse
For downloading latest CM11 ver. Click HERE

All in one !?
If you have hesitations; there are few Officials:
-LG JB (needed for bootloader)
-Omnirom 4.4 (outdated must)
-CM11 4.4.4+ (frugal dalvik' engine & up to date!)
-NamelessRom 2.1 (top eol)
There are all compatible with Fritzcola' twrp 2.8.6 and can be all multibooted if you chose Nameless as primary.
A first, install Multirom's twrp on LG JB; proceed a backup for a later re-use on secondary slot!
Smartlauncher & init.d tweaks are always battery friendly.
After that, with a simple Windows' trick, you can add aosp 5.1.1 on 2nd.
Nota : don't zipalign LG JB /system if you want to stay with GApps.