Database Develop

xv6600 serial v 1.02?

I updated my audiovox xv6600 with a newer rom update and microsoft active sync failed during the rom update. Now all the screen says is serial v1.02. I know this is bootloader mode but the OS wont boot. How can I fix this?

noleafclover said:
I updated my audiovox xv6600 with a newer rom update and microsoft active sync failed during the rom update. Now all the screen says is serial v1.02. I know this is bootloader mode but the OS wont boot. How can I fix this?
Click to expand...
Click to collapse
ttt
12345678910

Just reflash the ROM, ExtROM, and Radio.

Moving to Blue Angel.

92GTA said:
Just reflash the ROM, ExtROM, and Radio.
Click to expand...
Click to collapse
how do I do that if active sync wont connect?

You don't use activesync to flash a device, that's why. Leave it in bootloader mode, plug it into the USB on the computer, and run the upgrade utility. That's it.

It says I need an active sync connection to do it.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

That doesn't make any sense because the ROM updater disables AS and puts the phone into bootloader mode to do the update. Just click next...

noleafclover said:
It says I need an active sync connection to do it.
Click to expand...
Click to collapse
Gah, can you resize the image next time? That was a bit big.
And if you look at the message, it does say that you need the activesync connection, it says to make sure your device is synced with your computer using activesync. That's just basic data loss prevention.

(L5 II) Multi Tool(Root,Flash,Debloat)

Hey Guys Just an update
I have written a new script with Gui options
Install Drivers
Auto Flash(Updated Version)
Auto Root(With Impactor)
Debloat
Implemented Thanks Buttons so I dont take all the credit
http://www.slipsystem.co.za/downloads/multi-tool/
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Unlock Bootloader is reserved for future use it just tells you to help with the project

Hello
I could not root my e455 with the program
The program has a problem?

amin18n said:
Hello
I could not root my e455 with the program
The program has a problem?
Click to expand...
Click to collapse
Did it open inpactor when you clicked on root?

Yes opens the file
But in the end gives error
I have the same problem I have with this thread
http://forum.xda-developers.com/showthread.php?t=2448085

Root LG Optimus L5 II E455 DUAL
I have rooted my phone by using VROOT v1.7.3 english version

amin18n said:
Yes opens the file
But in the end gives error
I have the same problem I have with this thread
http://forum.xda-developers.com/showthread.php?t=2448085
Click to expand...
Click to collapse
If ypu have a problem using impactor this tool wont help, as it is not an alternarive root method it just automates the process. Try rooting with vroot, do a hard reset then root using impactor.

The root action does not work with the latest kdz release. Thank you for bringing this to my attention. I will have a look at automating the English version on vroot.

How to disable System Update notifications

Hey guys,
Big thanks to @autoprime for mentioning this info on this in the general G4 forum. Figured I'd sum up the steps and repost in our sub-forum for anybody who may be struggling.
If you're like me, you're waiting on root and don't want to accidentally take that new OTA update that was pushed out about a week ago. This OTA has been found to prevent rolling back to previous versions of android, and may also block some/many of the root methods that the developers are preparing to release to us.
If System Update is constantly bugging you to update, follow the directions below:
1) Enable USB Debugging
-Go to About phone and tap on Build number 10 times to enable Dev Options
-Enter Developer Options and enable USB Debugging
2) Download and Install the Debloater tool (this happens on your computer)
-Windows http://rootjunkysdl.com/getdownload.php?file=Gates/DeBloater/Debloater-setup-v3.85.exe
-OSX http://rootjunkysdl.com/getdownload.php?file=Gates/DeBloater/Debloater.v.3.85.dmg
3) Connect your phone via USB. Make sure to install any drivers needed
4) Watch for pop up requesting ADB Access on your phone
5) Launch the Debloater tool
6) Select OK on the popup
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
7) Click the top left button
8) Find LGDMSClient.apk and put a checkmark next to it. Then select Apply at the top
Congratulations! You no longer have to worry about pocket-updating your G4 and not being able to root down the road!

I just ran this and it doesn't show LGDMSClient.apk.....weird

Having problems updating to latest MIUI 9 weekly

I'm currently using the weekly-updated MIUI 9 developer rom from en.miui, though I haven't updated it for months, and I'm still on 7.10.6 as shown in the settings page.
I've tried to update to the latest weekly which is miui_MIMAX2Global_8.2.8_45df73749c_7.1.zip, though I keep failing.
The following are things I tried:
1. Directly flashing the zip through TWRP
2. Wiping first then flashing the zip
Though both ways get my phone stuck at boot where it shows the "M" of MIUI and "Unlocked" at the bottom.
Can anyone kindly point out my mistakes? I'm sorry if this is a stupid question or if I'm doing something dumb

have u tried updating the zip via the integrated system updater in rom settings?

@jbmc83
Yes, though it also doesn't seem to be working. Here's a screenshot of what is shown after clicking "choose update package".
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Allen Hu said:
@jbmc83
Yes, though it also doesn't seem to be working. Here's a screenshot of what is shown after clicking "choose update package".
Click to expand...
Click to collapse
hm...did you clean up system apps and accidentally deleted the app used to pick an update package?
another option would be to flash via fastboot, but ull need the fastboot specific rom package for that. also available on miui rom website.
Sent from my Xiaomi Mi Max 2 (Oxygen) using Tapatalk

Flash Without usb port? (BRICKED) s3 GT-I9300

I have an old Galaxy S3 GT-I9300 device
it got bricked and the charging port is broken .
the recovery will not open and will go back to splash screen
to charge the device i use a battery charger dock
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
how can i flash and unbrick it?
please help...

musicmate said:
As far as you described the circumstances, there is no Option to Unbrick it.
But Why?
Except from the Recovery Mode there is the Download Mode to Flash Software/Tools (e.g. Bootloader, Recovery, ROM):
-> One Option ist to access the I9300 via Download Mode and ADB/Odin, but without a working USB-Port... .
-> Another Option is to access via Wireless-ADB (Network-IP-based ADB), but to activate it, you'll have to get into the ROM's Settings (Developers-Options). Therefore you'll need an working ROM, which didn't seem so... .
-> Last possible Solution: Get in touch with Microelectronics and solder a new Micro USB Port to your Phone.
Otherwise you'll now have new opportunities to use your I9300 as:
Decorative Night Light/ Paperweight/ Doorstopper...
(Annotation: The Battery Charging Dock won't help, 'cause it's construed for standalone loading accumulators.)
Click to expand...
Click to collapse
mega oof

i hope put this to work today
AmberKat said:
mega oof
Click to expand...
Click to collapse
i hope put this to work today, and post here for you and others

board swap it