So as you all no, Ive unlocked my Bootloader and Rooted my phone.
Now i am trying to install the iHackers 2.1 ROM but am coming into confusion. I have not installed any other apps for the rooted device, i have a clean device with "Philz advance Recovery Kernel" Installed. That is all!
If i go through the process of installing the iHackers 2.1 ROM will this delete "Philz Advance Recovery"? As i think Philz recovery is a kernel
and iHackers wants me to install their Kernel. Correct? so the iHackers will replace philz recovery?? Am i right or wrong?
If im right then how would i install ROMS/WIPE DATA/CLEAR CACHE and that after ive installed the iHackers ROM???
At the end of the tutorial iHackers give they say install my desired Kernel after the Stock Kernel step. Is this were i replace "Philz Recovery"?
I here people installing DOOM's(Something) Kernel at this point. But does that mean they have lost the recovery Kernel?? Its confusing.
I would like the Doom Kernel everyone is using aswell as iHackers ROM as well as A Recovery Kernel lol, Not asking for much am i ! LOL
Could some help clear this up please, i have read many documents on here and havent wrapped my head round it yet. THANKS
The procedure should be like that, complete the iHackers procedure to install the room. After you did that if you lost the recovery you can flash any kernel with recovery via Flashtool, it's your choice. The recovery it's implemented in Kernel so don't get confused, after you install any rom you can flash any custom kernel with any recovery.
eclyptos said:
The procedure should be like that, complete the iHackers procedure to install the room. After you did that if you lost the recovery you can flash any kernel with recovery via Flashtool, it's your choice. The recovery it's implemented in Kernel so don't get confused, after you install any rom you can flash any custom kernel with any recovery.
Click to expand...
Click to collapse
Hi again mate...
So if i follow the steps for the iHackers ROM and decide i dont like it how do i revert back to the stock version i have (Which i have backedup via the CWM Recovery) if ive deleted it by switching kernels?
l-_-M4r5h411-_-l said:
Hi again mate...
So if i follow the steps for the iHackers ROM and decide i dont like it how do i revert back to the stock version i have (Which i have backedup via the CWM Recovery) if ive deleted it by switching kernels?
Click to expand...
Click to collapse
A nandroid backup and then a restore would be the easiest and recommended
shem2409 said:
A nandroid backup and then a restore would be the easiest and recommended
Click to expand...
Click to collapse
and if its to late for that? I backed up something when i had CWM installed but after changing to the iHackers Kernel that has now gone and im stuck with this. i prefer my stock! im not smart enough for this stuff!
Any help to revert back?
l-_-M4r5h411-_-l said:
and if its to late for that? I backed up something when i had CWM installed but after changing to the iHackers Kernel that has now gone and im stuck with this. i prefer my stock! im not smart enough for this stuff!
Any help to revert back?
Click to expand...
Click to collapse
Install kernel with CWM and restore what you backed up before.
eclyptos said:
Install kernel with CWM and restore what you backed up before.
Click to expand...
Click to collapse
Cheers Mate
Thats all from me now, im happy with my stock kernel and deleted bloatware haha. THANKS
Related
Hi guys, I have a X8 with GingerDX 21 and doixanh linuxkernel 004.
I'm going to sell my Xperia and the new owner wants to go back to my backup of stock eclair 2.1...
Can I restore with CMW? I made it with xrecovery... If not, how can I start the xrecovery instead cmw?
Can I restore the backup with no problems with my bootloader unlocked?
You can recover the stock kernel and stock ROM to the device. There should be links to those around here somewhere.
Also, you can try to install xRecovery again, but i'm not sure if this is possible when CWM is installed already..
TimeWasterNL said:
You can recover the stock kernel and stock ROM to the device. There should be links to those around here somewhere.
.
Click to expand...
Click to collapse
I have my backup of stock rom.. if I restore from recovery, must I flash first a stock kernel too?? Is not the kernel in the backup?
charcutero said:
I have my backup of stock rom.. if I restore from recovery, must I flash first a stock kernel too?? Is not the kernel in the backup?
Click to expand...
Click to collapse
i think no.
charcutero said:
Hi guys, I have a X8 with GingerDX 21 and doixanh linuxkernel 004.
I'm going to sell my Xperia and the new owner wants to go back to my backup of stock eclair 2.1...
Can I restore with CMW? I made it with xrecovery... If not, how can I start the xrecovery instead cmw?
Can I restore the backup with no problems with my bootloader unlocked?
Click to expand...
Click to collapse
I think that theres an option to restore xRecovery backup in CWM.
charcutero said:
I have my backup of stock rom.. if I restore from recovery, must I flash first a stock kernel too?? Is not the kernel in the backup?
Click to expand...
Click to collapse
NAND backup (made with recovery) only backups ROM, so, yes, you will have to flash stock kernel as well.
-Install stock rom with cwm or xrecovery (phone will bootloop) then
-Flash stock kernel..
There u go...
Sent from my Android using Tapatalk
Now looking for the stock kernel.. I don't find it
Checkout this one:
http://forum.xda-developers.com/showthread.php?t=1101296
You should use the Flashtool link, which flashes the stock ROM & stock kernel at once
TimeWasterNL said:
Checkout this one:
http://forum.xda-developers.com/showthread.php?t=1101296
You should use the Flashtool link, which flashes the stock ROM & stock kernel at once
Click to expand...
Click to collapse
Thanks again... I was checking my files in the hard disk and them were there too...
Now crossing my fingers and flashing...
Original Kernel flashed. Any problem! Now everything is a breeze thanks again.
Hello,
I have the Samsung N7000, but it is stuck on Odin too.
My phone is not bricked or something like it, but I want Clockworkmod recovery 6.0.4.5 on it so I can flash Cyanogenmod 11 KitKat on it.
It is stuck on NAND WRITE too. I already have Clockworkmod recovery 6.0.2.8 on it, so I need to upgrade it.
Any suggestions??
Best regards, Joey
Moved to a new thread in Note Q&A
JoeyLohstroh said:
Hello,
I have the Samsung N7000, but it is stuck on Odin too.
My phone is not bricked or something like it, but I want Clockworkmod recovery 6.0.4.5 on it so I can flash Cyanogenmod 11 KitKat on it.
It is stuck on NAND WRITE too. I already have Clockworkmod recovery 6.0.2.8 on it, so I need to upgrade it.
Any suggestions??
Best regards, Joey
Click to expand...
Click to collapse
You have not mentioned the file you were trying to flash.. No mind readers here...
Anyways, flash raw kernel from the current recovery and reboot recovery.
nokiamodeln91 said:
You have not mentioned the file you were trying to flash.. No mind readers here...
Anyways, flash raw kernel from the current recovery and reboot recovery.
Click to expand...
Click to collapse
Sorry, I tried flashing Clockworkmod 6.0.4.5 tar.md5 file.
It ran till it said NAND WRITE START and than FAIL. The collor above turned red and instead of PASS it said FAIL!
So raw kernel should fix this?
Do you have a link maybe? I'll search for it on Google but I want to make sure I have the good file.
Edit*
I found what you told me, but it says that raw kernel is for Android 4.4?
http://forum.xda-developers.com/showthread.php?t=2397000
I have 4.1.2 so I'm not sure if this will brick my device or something like that.
My device is all working fine and it is not bricked or bootloop YET, and since it has that NAND WRITE fail I'm not sure if it will reinstall my stock rom.. if it may brick.
I will still say what I wrote above.. Flash raw r4..reboot recovery and flash kk rom.
nokiamodeln91 said:
I will still say what I wrote above.. Flash raw r4..reboot recovery and flash kk rom.
Click to expand...
Click to collapse
Allright, but I don't need to upgrade my cwm then? Because on several websites are telling me that I need at least Philz touch CWM 6.0.4.3 on it..
JoeyLohstroh said:
Allright, but I don't need to upgrade my cwm then? Because on several websites are telling me that I need at least Philz touch CWM 6.0.4.3 on it..
Click to expand...
Click to collapse
1. To flash a kitkat rom you will need a recent Cwm recovery.
2. Philz tw kernel are not updated to latest cwms.
3. If you try to flash philz_touch_xxx.zip, it won't work as you already saw.
So if you want to root the phone, use philz tw kernel that is associated with a rom build number like XXLTA.. Then you will get Cwm but not recent enough flash kk. That's why you flash raw r4.reboot into recovery takes to to recent Cwm. From there you can flash kk..
Just note that r4 is for 4.3 and will not boot a 4.1.2 so you will need to flash kk after r4.
nokiamodeln91 said:
1. To flash a kitkat rom you will need a recent Cwm recovery.
2. Philz tw kernel are not updated to latest cwms.
3. If you try to flash philz_touch_xxx.zip, it won't work as you already saw.
So if you want to root the phone, use philz tw kernel that is associated with a rom build number like XXLTA.. Then you will get Cwm but not recent enough flash kk. That's why you flash raw r4.reboot into recovery takes to to recent Cwm. From there you can flash kk..
Just note that r4 is for 4.3 and will not boot a 4.1.2 so you will need to flash kk after r4.
Click to expand...
Click to collapse
Aah like that. But I think that I need Raw kernel R5 than? Because KitKat is Android 4.4
And when I flash raw kernel, than I should be able of flashing newest Cwm?
JoeyLohstroh said:
Aah like that. But I think that I need Raw kernel R5 than? Because KitKat is Android 4.4
And when I flash raw kernel, than I should be able of flashing newest Cwm?
Click to expand...
Click to collapse
Hi,
Is not possible to flash recovery without kernel, on recent samsung phones recovery and kernel are tied. (Maybe you can change recovery editing the kernel image but that is out of subject and maybe your skills).
Follow the steps @nokiamodeln91 suggest you, there is no other way. Raw Kernel has a KK compatible recovery.
llawarta said:
Hi,
Is not possible to flash recovery without kernel, on recent samsung phones recovery and kernel are tied. (Maybe you can change recovery editing the kernel image but that is out of subject and maybe your skills).
Follow the steps @nokiamodeln91 suggest you, there is no other way. Raw Kernel has a KK compatible recovery.
Click to expand...
Click to collapse
Okay. But if KitKat doesn't work that well, do I need to downgrade my Kernel and Cwm recovery than?
And do you have a link to the stock kernel?
Then you go into recovery, wipe data, and flash anew rom using odin or use recovery to flash a custom rom.
nokiamodeln91 said:
Then you go into recovery, wipe data, and flash anew rom using odin or use recovery to flash a custom rom.
Click to expand...
Click to collapse
But do you know/have a link to the stock kernel?
Just in case..
JoeyLohstroh said:
But do you know/have a link to the stock kernel?
Just in case..
Click to expand...
Click to collapse
No, and what will you do with the stock kernel?
nokiamodeln91 said:
No, and what will you do with the stock kernel?
Click to expand...
Click to collapse
If cwm doesn't want to instal KitKat, because of some reason, or I decide to not install it, than I want to reboot 4.1.2 but because of the Raw Kernel that won't be possible.
JoeyLohstroh said:
If cwm doesn't want to instal KitKat, because of some reason, or I decide to not install it, than I want to reboot 4.1.2 but because of the Raw Kernel that won't be possible.
Click to expand...
Click to collapse
LOL that does not make any sense.. You will need to restore the backup or install a new rom. There is no need to separately install a stock kernel.. May be you need to read more how all this works.
nokiamodeln91 said:
LOL that does not make any sense.. You will need to restore the backup or install a new rom. There is no need to separately install a stock kernel.. May be you need to read more how all this works.
Click to expand...
Click to collapse
Well, I didn't know that you sometimes need another kernel before you can install cwm.
I have been installing custom roms en recoverys many times on LG's so that isn't the problem.
But the NAND WRITE and FAIL problem must be a kernel issue than?
I have recently rooted my Sony Xperia SP 12.1.a.1.201(4.3),it was one hell of a process ! So currently my bootloader is unlocked with CWM recovery! I wanted to install a custom rom, and if i do so, i just want to know that how to go back to stock rom from cyanogen mod keeping the root! Please Help!
tanmay_sarkar said:
I have recently rooted my Sony Xperia SP 12.1.a.1.201(4.3),it was one hell of a process ! So currently my bootloader is unlocked with CWM recovery! I wanted to install a custom rom, and if i do so, i just want to know that how to go back to stock rom from cyanogen mod keeping the root! Please Help!
Click to expand...
Click to collapse
You could download and flash Exitenz rom stock based, also you can flash offical firmware by flashtool and root it
lorkan126 said:
You could download and flash Exitenz rom stock based, also you can flash offical firmware by flashtool and root it
Click to expand...
Click to collapse
what if i flash CyanogenMOD and then if i want to go back to Stock rom, isn't there a way that i cud keep root wen i go back to stock?
tanmay_sarkar said:
what if i flash CyanogenMOD and then if i want to go back to Stock rom, isn't there a way that i cud keep root wen i go back to stock?
Click to expand...
Click to collapse
No, you must root again
lorkan126 said:
No, you must root again
Click to expand...
Click to collapse
will flashtool work on Cyanogenmod? so that i could flash Stock firmware?
tanmay_sarkar said:
will flashtool work on Cyanogenmod? so that i could flash Stock firmware?
Click to expand...
Click to collapse
yes you can flash stock by flashtool it will work
lorkan126 said:
yes you can flash stock by flashtool it will work
Click to expand...
Click to collapse
flashing Stock again will lock my bootloader again or it will be unlocked only?
tanmay_sarkar said:
flashing Stock again will lock my bootloader again or it will be unlocked only?
Click to expand...
Click to collapse
Bootloader will be unlocked
lorkan126 said:
Bootloader will be unlocked
Click to expand...
Click to collapse
Thankz,By the way.. i have suggested that i could also flash pre rooted stock and den 201 kernel.. any ideas on that?
@ OP You have Q&A so quit PM me and ask all your questions here
The quick answer is yes - use your recovery to back up your rooted stock ROM. If you don't like CM simply return to your back up - it will still be rooted.
Alternatively, you have an unlocked bootloader - so you can flash Doomlord's kernel immediately after returning to stock (the kernel is insecure meaning you can flash a supersu zip in recovery to get root again).
Doomlord's latest kernels are decent and I can recommend Williams kernel too - as good as stock.
Parkside said:
The quick answer is yes - use your recovery to back up your rooted stock ROM. If you don't like CM simply return to your back up - it will still be rooted.
Alternatively, you have an unlocked bootloader - so you can flash Doomlord's kernel immediately after returning to stock (the kernel is insecure meaning you can flash a supersu zip in recovery to get root again).
Doomlord's latest kernels are decent and I can recommend Williams kernel too - as good as stock.
Click to expand...
Click to collapse
If i restore my rooted Stock Rom backed up by CWM, in this case also,do i have to Flash doomlord kernel?
tanmay_sarkar said:
If i restore my rooted Stock Rom backed up by CWM, in this case also,do i have to Flash doomlord kernel?
Click to expand...
Click to collapse
No, if you backup your rom and restore ut will be the same like you have now, kernel too, Root too
I've installed liquidsmooth rom kitkat 4.4.2 on my galaxy s advance GTI9070.. I made a backup of my stock jellybean update using TWRP recovery mode. But it seems that the new rom has CWM recovery mode. I want to restore my phone to backup rom, but i can't access TWRP recovery mode.. Everytime i enter into recovery mode it shows CWM mode and it doesn't show my backup.. Plzz help..
bhaukali said:
I've installed liquidsmooth rom kitkat 4.4.2 on my galaxy s advance GTI9070.. I made a backup of my stock jellybean update using TWRP recovery mode. But it seems that the new rom has CWM recovery mode. I want to restore my phone to backup rom, but i can't access TWRP recovery mode.. Everytime i enter into recovery mode it shows CWM mode and it doesn't show my backup.. Plzz help..
Click to expand...
Click to collapse
On what ROM you was before?
If it was on 4.4 too, take its kernel, install it with Universal kernel flasher and go to recovery and restore it.
Kernel is in ROMs zip, name of it is boot.img.
shut_down said:
On what ROM you was before?
If it was on 4.4 too, take its kernel, install it with Universal kernel flasher and go to recovery and restore it.
Kernel is in ROMs zip, name of it is boot.img.
Click to expand...
Click to collapse
No, i was not on v4.4. I was on stock jellybean update.
bhaukali said:
No, i was not on v4.4. I was on stock jellybean update.
Click to expand...
Click to collapse
Then best way is to flash stock JB with Odin, install CoCore with TWRP and do nandroid restore.
shut_down said:
Then best way is to flash stock JB with Odin, install CoCore with TWRP and do nandroid restore.
Click to expand...
Click to collapse
isn't there any other way without downloading stock JB.. Is there any way i can get get a kernel with TWRP for kitkat 4.4.2 for my phone?
bhaukali said:
isn't there any other way without downloading stock JB.. Is there any way i can get get a kernel with TWRP for kitkat 4.4.2 for my phone?
Click to expand...
Click to collapse
I was lazy to give you full answer there.
First on 4.4. our developers repartitioned preload partition to use it as a swap, and on 4.1.2 there were some apks. So if you want to go from 4.4 (and 4.3.) you must repartition it with this guide.
Then you download SlimKat or OmniROM and use its kernel to get TWRP, extract its ZIP and copy kernel to phone (it is boot.img in root of ZIP file). Then install Universal kernel flasher and some root explorer from the Play store and install kernel. When it is done go to recovery (you will have TWRP) and restore your backup.
P.S. You can use CoCore kernel with TWRP too. But the process is the same.
shut_down said:
I was lazy to give you full answer there.
First on 4.4. our developers repartitioned preload partition to use it as a swap, and on 4.1.2 there were some apks. So if you want to go from 4.4 (and 4.3.) you must repartition it with this guide.
Then you download SlimKat or OmniROM and use its kernel to get TWRP, extract its ZIP and copy kernel to phone (it is boot.img in root of ZIP file). Then install Universal kernel flasher and some root explorer from the Play store and install kernel. When it is done go to recovery (you will have TWRP) and restore your backup.
P.S. You can use CoCore kernel with TWRP too. But the process is the same.
Click to expand...
Click to collapse
Sorry for bothering you guys here, but does someone know how to flash cocore remix r 10 on any rom that is not stock? I mean any other flashable zip roms....... because everytime I end up in bootloop .
pictorul20 said:
Sorry for bothering you guys here, but does someone know how to flash cocore remix r 10 on any rom that is not stock? I mean any other flashable zip roms....... because everytime I end up in bootloop .
Click to expand...
Click to collapse
You get a bootloop because CoCore is for Stock ONLY. You can't use CoCore on any other ROM than on Stock based one.
@shut_down
My zip to restore is needed in 4.4 ROMs based on Team Canjica sources built till 14 June, after that date (since we removed /preload as swap partition on 15 June) is no longer needed with new builds this is only an info, most of the users don't know neither on what build they are :silly: better to continue to tell them to flash that zip before restoring that kind of ROMs, nice work.
Hi Guys. short (and maybe dumb) question but i have to be sure before messing up the phone of my friend.
I would like to flash CM11 nightlies with clockworkmod on a Samsung Galaxy Note GT-N7000.
I have read several tutorials for flashing the GT-N7000 and i'm not sure which is the best way to do it.
It is neccesary to update or change the (current stock) kernel? Or is it possible to just copy the recovery and ROM to the SD card, boot into download mode, install from there?
Sorry i only have experience with flashing my HTC One X.
Thanks in advance,
Greetings
I am in the same possition. A friend of mine wants to help him install a custom rom to his n7000.
He has the stock samsung rom and the phone is LAGGY!!
I only have experience with flashing cm11 to my own galaxy s3 with philz touch recovery.
I am reading for 4 hours now and i am lost...
Should i only use TWRP?
but twrp has a version only for cm 10...(i havent found by searching any cm11 twrp version for n7000)
Should i use cm 10 then and all is ok??
Thanks a lot
I am reading things about installing kernel for recovery (philz touch)
After installing that, its just wipe data / cache and install Rom from Zip.
Im still bit confused about the rooting process -> Trough Zip or trough Odin.
I hope some1 can help me.
First you need root. Then you can flash a custom rom.
To root your device tgere a several ways possible. All written here in sticky threads.
Easy way via Philz Kernel. You will get custom recovery and root in in step. What Rom is currentky installed? Last five digits are enough.
User_99 said:
First you need root. Then you can flash a custom rom.
To root your device tgere a several ways possible. All written here in sticky threads.
Easy way via Philz Kernel. You will get custom recovery and root in in step. What Rom is currentky installed? Last five digits are enough.
Click to expand...
Click to collapse
Stock rom is currently installed. I uploaded a picture with the specs within an attachment
Search for XXLTA Kernel in PhilZ thread and flash this one. All written in PhilZ thread. After that take your new Rom an follow the instructions in the thread again. For CM 11 you need also Raw4 kernel first. Only after that flash the custom rom. But that's all written 100000 times here....
User_99 said:
Search for XXLTA Kernel in PhilZ thread and flash this one. All written in PhilZ thread. After that take your new Rom an follow the instructions in the thread again. For CM 11 you need also Raw4 kernel first. Only after that flash the custom rom. But that's all written 100000 times here....
Click to expand...
Click to collapse
Thank you for your reply.
I now have:
- PhilZ-cwm6-XXLTA-ATL-5.15.0
- raw_kernel_r4_j43
- cm-11-20141207-NIGHTLY-n7000
am i good to go?
hosseltietjes1990 said:
Thank you for your reply.
I now have:
- PhilZ-cwm6-XXLTA-ATL-5.15.0
- raw_kernel_r4_j43
- cm-11-20141207-NIGHTLY-n7000
am i good to go?
Click to expand...
Click to collapse
you also need gapps
eveles said:
you also need gapps (and maybe for later use one custom kernel )
Click to expand...
Click to collapse
Yes i know, to install play store and other applications. But for the flashing part, that is enough right? The kernel, ROM and Philz Recovery?
hosseltietjes1990 said:
Yes i know, to install play store and other applications. But for the flashing part, that is enough right? The kernel, ROM and Philz Recovery?
Click to expand...
Click to collapse
yes that is enough but gapps are usually installed right after the ROM so having it together with the other files is a good idea.
- transfer ROM, Kernels to internal or external SD.
- flash Philz JB kernel compatible with your device [ follow the instruction in Philz kernel thread on how to flash with no yellow triangle ] and reboot then verify that root is working (just try and give a file explorer root access or install an app like root checker from playstore)
- Once root is verified reboot to recovery (you should now be in philz touch recovery) I recommend you take a nandroid backup but the choice is yours
- Wait for the backup to complete or if you are skipping backup then
a) wipe data factory reset
b) wipe cache
c) format system by going into mounts and storage
d) wipe dalvik cache
- flash raw kernel and reboot recovery.
- Now in TWRP recovery (you can again choose to do steps a to d which is totally optional) find and flash the ROM you want
- flash gapps
- reboot
That should do it
and now just in case you don't like what you flashed you can always go back to your ROM if you took a nandroid backup as suggested in the installation steps
hope it helps
Restore instructions :
I don't know if CWM recovery takes he same path to backup as Philz recovery but if it does it pretty simple
- just reboot to recovery and do the steps a to d from the above installation steps and restore backup
But in case you are not able to find backup file in CWM then do this
- reboot to recovery
- flash Philz kernel (same one you flashed during installation )
-go to advanced and select "reboot recovery"
- now you should be in Philz recovery again
- do steps from a to d again and restore
Simple
REVENGE SOLVES EVERYTHING
tysonraylee said:
yes that is enough but gapps are usually installed right after the ROM so having it together with the other files is a good idea.
- transfer ROM, Kernels to internal or external SD.
- flash Philz JB kernel compatible with your device [ follow the instruction in Philz kernel thread on how to flash with no yellow triangle ] and reboot then verify that root is working (just try and give a file explorer root access or install an app like root checker from playstore)
- Once root is verified reboot to recovery (you should now be in philz touch recovery) I recommend you take a nandroid backup but the choice is yours
- Wait for the backup to complete or if you are skipping backup then
a) wipe data factory reset
b) wipe cache
c) format system by going into mounts and storage
d) wipe dalvik cache
- flash raw kernel and reboot recovery.
- Now in TWRP recovery (you can again choose to do steps a to d which is totally optional) find and flash the ROM you want
- flash gapps
- reboot
That should do it
and now just in case you don't like what you flashed you can always go back to your ROM if you took a nandroid backup as suggested in the installation steps
hope it helps
REVENGE SOLVES EVERYTHING
Click to expand...
Click to collapse
Very clear! Thank you very much. Sorry for being a noob with this but it i think you cant be too sure when you are flashing kernels. Got my Nexus S bricked once while i was flashing a custom kernel.
And i dont have any experience with flashing samsung phone. Only HTC.
Thanks again and have a good day!
hosseltietjes1990 said:
Very clear! Thank you very much. Sorry for being a noob with this but it i think you cant be too sure when you are flashing kernels. Got my Nexus S bricked once while i was flashing a custom kernel.
And i dont have any experience with flashing samsung phone. Only HTC.
Thanks again and have a good day!
Click to expand...
Click to collapse
I was in the same boat 2 years ago so i understand the situation I am glad i could help and if you are coming from nexus I am pretty sure you won't have any issues at all. Just one or two flashes and you will know everything
and who knows I might need your help one day as I am thinking of buying the N6 myself
oh and btw let me tell you that recovery and kernel are in the same partition for N7000 so you can't have "this kernel and that recovery" here as you would in other devices. Thus if you need a certain recovery then you have to flash a certain kernel and if you need a certain kernel then it will install the recovery that comes with it overwriting the previous one. Also even if you flash just recovery somehow, the device will restore the one with the kernel upon reboot
So yeah
REVENGE SOLVES EVERYTHING
tysonraylee said:
I was in the same boat 2 years ago so i understand the situation I am glad i could help and if you are coming from nexus I am pretty sure you won't have any issues at all. Just one or two flashes and you will know everything
and who knows I might need your help one day as I am thinking of buying the N6 myself
REVENGE SOLVES EVERYTHING
Click to expand...
Click to collapse
I just recently flashed my HTC one X And the One X of a friend of mine. No need there to flash the kernel on that phone, only recovery trough adb and flash rom. So i really dont wanna mess with kernels
I you would like to ask something, feel free to ask! Thanks for the support
hosseltietjes1990 said:
Thank you for your reply.
I now have:
- PhilZ-cwm6-XXLTA-ATL-5.15.0
- raw_kernel_r4_j43
- cm-11-20141207-NIGHTLY-n7000
am i good to go?
Click to expand...
Click to collapse
In the guide below
http://forum.xda-developers.com/showthread.php?p=53346482
it clearly says ''-Download Raw Kernel r5 and copy it to either your internal or external memory''
You have downloaded raw_kernel_r4_j43
Why is that?
Am i missing something?
My friend's n7000 runs on 4.1.2 as well and my goal is to install cm11 as well.
Saying that, which is the appropriate raw_kernel???
The kernel code name should match the currently installed TW rom (4.1.2) or should it match the CM11 rom you intend to flash (4.4.4)????
to answer my own question : In XxPixX's quide of course it says r5 so 4.4.4 )
Anyway the kernel that you have downloaded is neither r5 nor r1 (i beleive that r1 is for 4.1)
Thanks, i hope someone with more experiense would clarify that!!
eveles said:
In the guide below
http://forum.xda-developers.com/showthread.php?p=53346482
it clearly says ''-Download Raw Kernel r5 and copy it to either your internal or external memory''
You have downloaded raw_kernel_r4_j43
Why is that?
Am i missing something?
My friend's n7000 runs on 4.1.2 as well and my goal is to install cm11 as well.
Saying that, which is the appropriate raw_kernel???
thanks!!!!!!
Click to expand...
Click to collapse
yes you have to download raw kernel because CM 11 or Android Kitkat requires SE Linux compatible recovery and raw kernel is the one that has this compatibility.
If you skip raw kernel then installation will fail giving you "status 7 installation aborted" error.
Downloading the latest Raw kernel for KitKat should do it just read in the kernel thread and download the latest one for kk.
the kernel code name should match the ROM (4.1.2) the one you currently have. Download the philz JB kernel for your JB ROM(follow the steps given in philz kernel thread)
There is no requirement as such for 4.4.4 ROM
REVENGE SOLVES EVERYTHING
tysonraylee said:
yes you have to download raw kernel because CM 11 or Android Kitkat requires SE Linux compatible recovery and raw kernel is the one that has this compatibility.
If you skip raw kernel then installation will fail giving you "status 7 installation aborted" error.
Downloading the latest Raw kernel for KitKat should do it just read in the kernel thread and download the latest one for kk.
REVENGE SOLVES EVERYTHING
Click to expand...
Click to collapse
Raw Kernel 5 (download link: http://ge.tt/5fBuPYn1/v/1?c ) is the good one right. Think that should do the trick. I see some people just flashing the philz touch cmw, and then the Rom, without the kernel. Several video's on youtube confirming that. So It's quite confusing 20 people explaining how to install CM11 and root on Samsung Note GT-N7000
hosseltietjes1990 said:
Raw Kernel 5 (download link: http://ge.tt/5fBuPYn1/v/1?c ) is the good one right. Think that should do the trick. I see some people just flashing the philz touch cmw, and then the Rom, without the kernel. Several video's on youtube confirming that. So It's quite confusing 20 people explaining how to install CM11 and root on Samsung Note GT-N7000
Click to expand...
Click to collapse
The download link you have provided links to r6 not r5
r6 says that is only for omniron 4.4
We were talking about cm11.
eveles said:
The download link you have provided links to r6 not r5
Click to expand...
Click to collapse
Oh i'm sorry haha. R6 should work right?
edit: sorry i did not read properly. r5 it is then
hosseltietjes1990 said:
Oh i'm sorry haha. R6 should work right?
Click to expand...
Click to collapse
No.
r5 should work.
Dude you are more confused than i am!!
hosseltietjes1990 said:
Raw Kernel 5 (download link: http://ge.tt/5fBuPYn1/v/1?c ) is the good one right. Think that should do the trick. I see some people just flashing the philz touch cmw, and then the Rom, without the kernel. Several video's on youtube confirming that. So It's quite confusing 20 people explaining how to install CM11 and root on Samsung Note GT-N7000
Click to expand...
Click to collapse
yes that should do it, download the k44 one
I haven't seen any videos about that but it is possible to do so but that's just using the recovery temporarily to flash a certain ROM but in the end that recovery is replaced by the ROMs kernel recovery its the same thing we are doing by using raw kernel here in these installation steps but its true that it gets a little confusing
I have updated my previous reply. Please refresh the page to see the explanation
eveles said:
The download link you have provided links to r6 not r5
Click to expand...
Click to collapse
R6 is the latest version. Please download the R6-k44.zip
REVENGE SOLVES EVERYTHING