I know there is a lot of threats like this but non helped me....
My I9000 have a bootloop and wont enter recovery but download mode works fine... I tryed flashing a lot of roms ( stock, semafor, darky) non wolld help.. Always bootloop and no recovery working, on charger i have bootloop with battery image... Is there something eles i can try before i use a hammer and destroy my SGS ?????
Sorry for bad English.....
djoledtc said:
I know there is a lot of threats like this but non helped me....
My I9000 have a bootloop and wont enter recovery but download mode works fine... I tryed flashing a lot of roms ( stock, semafor, darky) non wolld help.. Always bootloop and no recovery working, on charger i have bootloop with battery image... Is there something eles i can try before i use a hammer and destroy my SGS ?????
Sorry for bad English.....
Click to expand...
Click to collapse
Take a look at My Android Solutions, link below about methods to solve boot loops, if that does not help you can flash a recue kit from My Android collections link below too
No don't use hammer yet, if you are so inclined to do so, feel free to donate it than using the hammer
Check this out! Links to useful Guides and " Banned " Documentaries
djoledtc said:
Is there something eles i can try before i use a hammer and destroy my SGS ?????.....
Click to expand...
Click to collapse
You must be very rich, mate. Hopefully you don't use your hammer every time when your car or furniture has a little problem
Try this unbrick guide:
http://forum.xda-developers.com/showthread.php?t=2444308
I have tried a lot of times flashing stock ROM but no luck... Alweys bootloop , and no recovery......
xsenman said:
Take a look at My Android Solutions, link below about methods to solve boot loops, if that does not help you can flash a recue kit from My Android collections link below too
No don't use hammer yet, if you are so inclined to do so, feel free to donate it than using the hammer
Check this out! Links to useful Guides and " Banned " Documentaries
Click to expand...
Click to collapse
I tried your i9000 Rescue EzBase Rescue and Recovery by nitr8 now it is even worse...... It got me FAIL in ODIN on around 30 %.... Now i cant flash any more any ROM i always get FAIL at some point.... ... Any help ????
Are you using compatible Odin version? Which one did you use?
Did you check my thread?
it got me FAIL in ODIN on around 30 %.... Now i cant flash any more any ROM i always get FAIL at some point
Click to expand...
Click to collapse
Is Samsung Kies installed on your PC? You must kill its process in the Task manager before using Odin.
tetakpatak said:
Are you using compatible Odin version? Which one did you use?
Did you check my thread?
Is Samsung Kies installed on your PC? You must kill its process in the Task manager before using Odin.
Click to expand...
Click to collapse
I checked your thread , but there is a part where i have to download Stock ROM for my baseband width and firmware... I dont know what is my baseband ... On the back of the phone only writes model: GT-I9000 and SSN : I9000GSMH... How can i know what is my stock ROM.. I tried with FROYO but still bootloop and no recovery........ I Kill KIES processe when using Odin...... Odin version is 1.83
djoledtc said:
I checked your thread , but there is a part where i have to download Stock please for my baseband width and firmware... I dont know what is my baseband ... On the back of the phone only writes model: GT-I9000 and SSN : I9000GSMH... How can i know what is my stock ROM.. I tried with FROYO but still bootloop and no recovery........ I Kill KIES processe when using Odin...... Odin version is 1.83
Click to expand...
Click to collapse
It is easy to find out, as the codes in the firmware/baseband code are regarding the regions. You can browse in www which is the proper regional code for your country.
Odin 1.83 is compatible, run is as administrator. The ROMs are out of 3 parts. Try to flash one of them as described (choosing proper files for PDA, CSC, Modem plus Pit 512 file) when all ready, run download mode , connect USB cable and start flashing as soon as Odin recognizes your phone. Don't leave it long in download mode waiting as the i9000 seems to have some kind of standby/sleep after 30sec or bit longer.
Remember what Odin displays in the leftmost fields during the flashing and post here (quote my text please / reply) if something goes wrong. Otherwise that proceeding should revive your phone.
tetakpatak said:
It is easy to find out, as the codes in the firmware/baseband code are regarding the regions. You can browse in www which is the proper regional code for your country.
Odin 1.83 is compatible, run is as administrator. The ROMs are out of 3 parts. Try to flash one of them as described (choosing proper files for PDA, CSC, Modem plus Pit 512 file) when all ready, run download mode , connect USB cable and start flashing as soon as Odin recognizes your phone. Don't leave it long in download mode waiting as the i9000 seems to have some kind of standby/sleep after 30sec or bit longer.
Remember what Odin displays in the leftmost fields during the flashing and post here (quote my text please / reply) if something goes wrong. Otherwise that proceeding should revive your phone.
Click to expand...
Click to collapse
Still nothing.... I also tryed some rescue kits with Heimdall, but nothing.. Flashing goes ok, but stiil bootloop and no recovery...... I go into download by volume down+home+power , and download mode is in english so i think it is the real i9000 international and not that chines/korean version of shw m100s.... On the back of my device say i9000gsmh.... Is there any way that i can enter recovery mode ???? i have no more ideas... i read 100 of treads and non helped me.....
xsenman said:
Take a look at My Android Solutions, link below about methods to solve boot loops, if that does not help you can flash a recue kit from My Android collections link below too
No don't use hammer yet, if you are so inclined to do so, feel free to donate it than using the hammer
Check this out! Links to useful Guides and " Banned " Documentaries
Click to expand...
Click to collapse
xsenman -- I have same problem like in this treadh http://forum.xda-developers.com/showthread.php?t=2454763
I it posible your sugestion that internal SD card is dead so i always have bootloop and no recovery mode??? Can your post http://forum.xda-developers.com/showpost.php?p=31017954&postcount=5335 help me??? How large SD card do i need ??? 2Gb, 4Gb, 8gb, 16gb?????
It is really strange. Did you ever use ADB?
Try to get connection via ADB and make a logcat to see what the error is.
There are many threads about ADB / SDK
djoledtc said:
xsenman -- I have same problem like in this treadh http://forum.xda-developers.com/showthread.php?t=2454763
I it posible your sugestion that internal SD card is dead so i always have bootloop and no recovery mode??? Can your post http://forum.xda-developers.com/showpost.php?p=31017954&postcount=5335 help me??? How large SD card do i need ??? 2Gb, 4Gb, 8gb, 16gb?????
Click to expand...
Click to collapse
sorry about the delayed response. Actually it looks like your problem is identical to this thread so can you tell me did you use CM updater or did this problem crop up because you down grade from one CM version to another?
In any case lets try and fix the boot loader , flash the JVU bootloader , phone bootloader update ticked with the PIT file (repartition ticked) and see if it boots .
or at least you should be able to get into recovery mode with combo keys after this. IF it did not boot you can flash the JVU ROM again
I doubt this is due to corrupt internal SD card, but maybe its the final option to try in-order to get your phone booting
Check this out! Links to useful Guides and " Banned " Documentaries
tetakpatak said:
It is really strange. Did you ever use ADB?
Try to get connection via ADB and make a logcat to see what the error is.
There are many threads about ADB / SDK
Click to expand...
Click to collapse
I am downloading SDK and i will report.....
xsenman said:
sorry about the delayed response. Actually it looks like your problem is identical to this thread so can you tell me did you use CM updater or did this problem crop up because you down grade from one CM version to another?
In any case lets try and fix the boot loader , flash the JVU bootloader , phone bootloader update ticked with the PIT file (repartition ticked) and see if it boots .
or at least you should be able to get into recovery mode with combo keys after this. IF it did not boot you can flash the JVU ROM again
I doubt this is due to corrupt internal SD card, but maybe its the final option to try in-order to get your phone booting
Check this out! Links to useful Guides and " Banned " Documentaries
Click to expand...
Click to collapse
I dont know... My friend was updateing kernel and he said he mixed up some ROM and then was this situation = bootloop and recovery.....
I treid your i9000_xwjvu.tar and after Odin flash PASS phone turn off it self and no booting any more and no download mode... Pull baterry for 20sec and noh have only download again...... I will read more of your threads..... If i in the and try to put external SD how large should minimum be??? 2Gb, 4Gb ????
tetakpatak said:
It is really strange. Did you ever use ADB?
Try to get connection via ADB and make a logcat to see what the error is.
There are many threads about ADB / SDK
Click to expand...
Click to collapse
I tried with sdk but computer dont recognise my device.... on adb devices i get nothing.....
Today i got same problem, phone with Cyanogenmod in bootloop, on charger same bootloop. Solved with flashing stock ROM with Odin.
Maybe stupid question, but noone asked it, is your battery charged? Because in bootloop it does not charge the battery. And for flashing you need more then minimum. If you have multimeter measure voltage on battery, if it is 3,7V and less, flasshing will not be done, you need about 3,9V.
ARSiq said:
Today i got same problem, phone with Cyanogenmod in bootloop, on charger same bootloop. Solved with flashing stock ROM with Odin.
Maybe stupid question, but noone asked it, is your battery charged? Because in bootloop it does not charge the battery. And for flashing you need more then minimum. If you have multimeter measure voltage on battery, if it is 3,7V and less, flasshing will not be done, you need about 3,9V.
Click to expand...
Click to collapse
Battery is charged.. I have extrenal charger so I am charging the battery when i read posts .... What ROM did you flash?? link me.....
Did you update in SDK manager sources for your Android version? Check my thread here:
http://forum.xda-developers.com/showthread.php?t=2444308
You will find on the bottom of the OP attached screenshot with red mark where you have to check and download updates.
ADB drivers for Android versions 4.0+ could be not pre-installed and you have to do it manually. So for CM10.x ROMs you shouldn't use ADB (SDK manager) versions older than 1.0.31.
djoledtc said:
I tried with sdk but computer dont recognise my device.... on adb devices i get nothing.....
Click to expand...
Click to collapse
djoledtc said:
I dont know... My friend was updateing kernel and he said he mixed up some ROM and then was this situation = bootloop and recovery.....
I treid your i9000_xwjvu.tar and after Odin flash PASS phone turn off it self and no booting any more and no download mode... Pull baterry for 20sec and noh have only download again...... I will read more of your threads..... If i in the and try to put external SD how large should minimum be??? 2Gb, 4Gb ????
Click to expand...
Click to collapse
ok, can you try flashing them all at one go, as mentioned below ( remove SIM CARD as well as EXT SD Card)
1) Select PIT > 512 PIT (If 'Re-Partition' is not checked under 'Option', check it)
2) Select Bootloader > i9000_xwjvu.tar ( do not tick update phone boot loader)
3. Select PDA > CODE_I9000XXJVU_CL851880_REV03_user_low_ship.tar.m d5
4. Select PHONE > MODEM_I9000XXJVU_REV_00_CL1092175.tar.md5
5. Select CSC > GT-I9000-CSC-MULTI-OXAJVU.tar.md5
EDIT: IF still not booting, flash the CWM semaphore kernel, see if get into CWM recovery
as for using external SD card 8GB or 16 GB will be better, you need a 2GB primary partition (acts as phone memory) and the rest of it as a second partition. (acts as internal SD card)
Check this out! Links to useful Guides and " Banned " Documentaries
xsenman said:
ok, can you try flashing them all at one go, as mentioned below ( remove SIM CARD as well as EXT SD Card)
1) Select PIT > 512 PIT (If 'Re-Partition' is not checked under 'Option', check it)
2) Select Bootloader > i9000_xwjvu.tar ( do not tick update phone boot loader)
3. Select PDA > CODE_I9000XXJVU_CL851880_REV03_user_low_ship.tar.m d5
4. Select PHONE > MODEM_I9000XXJVU_REV_00_CL1092175.tar.md5
5. Select CSC > GT-I9000-CSC-MULTI-OXAJVU.tar.md5
EDIT: IF still not booting, flash the CWM semaphore kernel, see if get into CWM recovery
as for using external SD card 8GB or 16 GB will be better, you need a 2GB primary partition (acts as phone memory) and the rest of it as a second partition. (acts as internal SD card)
Check this out! Links to useful Guides and " Banned " Documentaries
Click to expand...
Click to collapse
Tried all at one go and didnot help... Still have bootloop and no recovery. i tried semaphore kernels and same results. When i flashed darky karnel then Samsung logo hade some green darky text writen on the bottom of the screen but still the samo problem..... .. I lost all ideas.... If i find some large SD card i will try some solutions with changing internal memory with exSD.....
My friend's I9001 get stuck in bootloop when powered on it goes to logo and animation and back to logo again and animation again and again.I don't know how this phone get into bootloop.It can get to download mode but can't get to recovery mode,on the screen "RAMPDUMP MODE" cause : Force upload.I've tried to flash it back to stock rom I9001XXKQD_I9001ODDKP5_I9001DDKP9_HOME.tar.md5 and I9001XXKQD_I9001ODDKP5_I9001DDKP9_HOME.tar.rar flash it with odin it goes well except when odin says close serial port and wait for rebooting,the phone doesn't reboot,the screen remain off.it passes the odin,but when i turn it on,it keeps bootlooping.I,ve tried to flash stock recovery but no results.Is there another way to fix this?Thank you very much,any suggestion will be appreciated.
Check xsenman's sticky thread
still no luck
tetakpatak said:
Check xsenman's sticky thread
Click to expand...
Click to collapse
I've tried and check xsenman's tricks but still get bootlooping.flash with odin ok but the phone doesn't restart when odin say restart,it remains dead or there's battery charging logo on the screen.Is it hardware failure?
lexzyz said:
I've tried and check xsenman's tricks but still get bootlooping.flash with odin ok but the phone doesn't restart when odin say restart,it remains dead or there's battery charging logo on the screen.Is it hardware failure?
Click to expand...
Click to collapse
Have you done this? Solution:- Flash i9001 Boot.tar with AriesVe.ops in Odin 4.43 or look in the i9001 WIKI here
Check this out! Links to useful Guides and " Banned " Documentaries
xsenman said:
Have you done this? Solution:- Flash i9001 Boot.tar with AriesVe.ops in Odin 4.43 or look in the i9001 WIKI here
Check this out! Links to useful Guides and " Banned " Documentaries
Click to expand...
Click to collapse
Of course,but still I can't reach recovery mode,when I push vol up and power it goes to download mode screen (but if I try yo flash with odin it shows two errors MMC Boot: MBR Read failed on the upper left of the screen),but when I push vol down home and power it could get to download mode,it can be flashed via odin but when all downoad process is done the phone doesn't reboot.and still in bootloop.Any other suggestion?I've also try to install oneclick loader but it doesn't work in my xp.Thanks before xsenman,I'm waiting your advise.
lexzyz said:
.Any other suggestion?I've also try to install oneclick loader but it doesn't work in my xp.Thanks before xsenman,I'm waiting your advise.
Click to expand...
Click to collapse
Apparently if it says MBR Failed, than your Bootloader is corrupted . refer to your i9001 WIKI and flash a clockworkMod recovery via Odin 4.43, untick auto reboot, powerdown by battery pull, than try for CWM recovery, to format everything in CWM ( you must not try to reboot phone when you format everything but only after flashing a ROM) with a stock 19001 ROM with a boot.tar , all the guides you may need is in the WIKI, make a careful digest of it and proceed, once you comprehend it all.
Check this out! Links to useful Guides and " Banned " Documentaries
I was downloading into my captivate when i accidently unplugged the phone. Now I can't turn my phone on . I tried everything and now I don't have any ideea what to do next . Can I fix it ? Please help . Tnx
ECristinaa said:
I was downloading into my captivate when i accidently unplugged the phone. Now I can't turn my phone on . I tried everything and now I don't have any ideea what to do next . Can I fix it ? Please help . Tnx
Click to expand...
Click to collapse
buy a USB JIG from ebay to get into download mode, if that is not possible you can use unbrickableMOD or JTAG (visit mobile technician) to get it working.
refer to all possible guides in [Tutorial][A.I.O. Rescue & Recovery] My Android Solutions. [Help & Troubleshooting]
1) Problem:- Cannot enter Download or Recovery Mode
25) Problem:- Phone completely DEAD, Not Charging and NO response, only this SEC S5PC110 TEST B/D
Check this out! Links to useful Guides and " Banned " Documentaries
Don't give up and buy stuff yet.
try really good to press , power + home + down
It happen to me also my friend tried many times to enter download mod, and I was able in a single push.
so give It so more time before spending money.
Tnx a lot
xsenman said:
buy a USB JIG from ebay to get into download mode, if that is not possible you can use unbrickableMOD or JTAG (visit mobile technician) to get it working.
refer to all possible guides in [Tutorial][A.I.O. Rescue & Recovery] My Android Solutions. [Help & Troubleshooting]
1) Problem:- Cannot enter Download or Recovery Mode
25) Problem:- Phone completely DEAD, Not Charging and NO response, only this SEC S5PC110 TEST B/D
Check this out! Links to useful Guides and " Banned " Documentaries
Click to expand...
Click to collapse
Tnx for your reply . USB JIB doesn`t work . Now I will try unbrikableMOD .
ECristinaa said:
Tnx for your reply . USB JIB doesn`t work . Now I will try unbrikableMOD .
Click to expand...
Click to collapse
Yes i suggest that.
By the looks of it, you were flashing a bootloader when it failed.
Sent from my GT-I9505 using XDA Premium 4 mobile app
Hello developers,
A few hours ago a friend of mine gave me a Samsung Galaxy S I9000 which doesn't boot. He tried flashing a Custom ROM via Heimdall and flashed the kernel first.
Since then it is stuck on the splashscreen saying "Galaxy S GT-I9000 Samsung" and it seems to be restarting every few seconds. I cannot access anything on the phone, neither Download Mode nor the Recovery. I have tried *every* possible combination to accomplish that. The phone doesn't vibrate when turned on (I think it should) and it is not possible to turn it off using the power button, which is why I have to remove the battery for that. The bootloop is somehow weird, since it does not boot the OS itself. The screen flashes unperiodically, once the Samsung Logo is visible for about 1 second before it turns off and then again for a little longer, about 3 seconds. Between that the screen doesn't seem to be turned on (or isn't simply showing anything) and blacked out for also an unperiodical amount of time.
When turned off and connected to a PC or the wall charger it shows a little circle that seems to indicate loading. Sadly on this Galaxy S it doesn't move, which is why I suppose it is not doing anything. It is btw not recognized by the computer at all, neither ADB or Odin or Heimdall.
I hope that you can help me somehow.
Regards,
error0x0000034
error0x0000034 said:
I hope that you can help me somehow.
Click to expand...
Click to collapse
Try for download mode solutions as mentioned in
[Tutorial][A.I.O. Rescue & Recovery] My Android Solutions. [Help & Troubleshooting]
Check this out! Links to useful Guides and " Banned " Documentaries
xsenman said:
Try for download mode solutions as mentioned in
[Tutorial][A.I.O. Rescue & Recovery] My Android Solutions. [Help & Troubleshooting]
Check this out! Links to useful Guides and " Banned " Documentaries
Click to expand...
Click to collapse
Thank you very much for your answer. I will have a look at this and will provide feedback if it worked later.
Hello, I have the EXACT same problem with exact same model, the hard reset doesn't work either and the screen keeps flasing in a loop, the only way to stop it is to take the battery out... Have you managed to solve the problem???
Same thing!!
anyone has any solutions?? please help!!
Use jig
hi,i have i9000 in my hand with a problem of not stay in download mode and go to recovery after put in download mode just after 5 seconds,
history is someone flashed it with anycall rom and afterthat it stuck at logo everytime and when i wipe it cache and factory then it is power up normally but just for one time,
now i cant flashed it bcoz it cant stay in download mode and immediately go to recovery,
in recovery also shows the
E:internal mmc pen fail
E:lfs pass open fail
how to fix it and back to original i9000 stock rom?
waiting and searching for this issue long time and find this link below for korean galaxy s,
http://forum.xda-developers.com/showthread.php?t=2573023
with the given details i do the first step and it fail at end on half way loading bar on downloading mode,
now device is restarting at samsung anycall logo randomly,
can some one help me to fix this issue?
zeeshantayyab said:
can some one help me to fix this issue?
Click to expand...
Click to collapse
Do it again after battery pull and fresh Odin after reboot PC. If it get stuck after stage one, skip 2 & 3, proceed to stage 4.
Check this out! Links to useful Guides and " Banned " Documentaries
xsenman said:
Do it again after battery pull and fresh Odin after reboot PC. If it get stuck after stage one, skip 2 & 3, proceed to stage 4.
Check this out! Links to useful Guides and " Banned " Documentaries
Click to expand...
Click to collapse
mobile is power up now in working condition except memory(internal),its corrupted,
any idea to fix it?
zeeshantayyab said:
mobile is power up now in working condition except memory(internal),its corrupted,
any idea to fix it?
Click to expand...
Click to collapse
Look in My Directory (yellow Pages) in SD cards section about it.
Check this out! Links to useful Guides and " Banned " Documentaries