[Q] I9000 Bootloop, recovery dont work - Galaxy S I9000 Q&A, Help & Troubleshooting

I know there is a lot of threats like this but non helped me....
My I9000 have a bootloop and wont enter recovery but download mode works fine... I tryed flashing a lot of roms ( stock, semafor, darky) non wolld help.. Always bootloop and no recovery working, on charger i have bootloop with battery image... Is there something eles i can try before i use a hammer and destroy my SGS ?????
Sorry for bad English.....

djoledtc said:
I know there is a lot of threats like this but non helped me....
My I9000 have a bootloop and wont enter recovery but download mode works fine... I tryed flashing a lot of roms ( stock, semafor, darky) non wolld help.. Always bootloop and no recovery working, on charger i have bootloop with battery image... Is there something eles i can try before i use a hammer and destroy my SGS ?????
Sorry for bad English.....
Click to expand...
Click to collapse
Take a look at My Android Solutions, link below about methods to solve boot loops, if that does not help you can flash a recue kit from My Android collections link below too
No don't use hammer yet, if you are so inclined to do so, feel free to donate it than using the hammer
Check this out! Links to useful Guides and " Banned " Documentaries ​

djoledtc said:
Is there something eles i can try before i use a hammer and destroy my SGS ?????.....
Click to expand...
Click to collapse
You must be very rich, mate. Hopefully you don't use your hammer every time when your car or furniture has a little problem
Try this unbrick guide:
http://forum.xda-developers.com/showthread.php?t=2444308

I have tried a lot of times flashing stock ROM but no luck... Alweys bootloop , and no recovery......

xsenman said:
Take a look at My Android Solutions, link below about methods to solve boot loops, if that does not help you can flash a recue kit from My Android collections link below too
No don't use hammer yet, if you are so inclined to do so, feel free to donate it than using the hammer
Check this out! Links to useful Guides and " Banned " Documentaries ​
Click to expand...
Click to collapse
I tried your i9000 Rescue EzBase Rescue and Recovery by nitr8 now it is even worse...... It got me FAIL in ODIN on around 30 %.... Now i cant flash any more any ROM i always get FAIL at some point.... ... Any help ????

Are you using compatible Odin version? Which one did you use?
Did you check my thread?
it got me FAIL in ODIN on around 30 %.... Now i cant flash any more any ROM i always get FAIL at some point
Click to expand...
Click to collapse
Is Samsung Kies installed on your PC? You must kill its process in the Task manager before using Odin.

tetakpatak said:
Are you using compatible Odin version? Which one did you use?
Did you check my thread?
Is Samsung Kies installed on your PC? You must kill its process in the Task manager before using Odin.
Click to expand...
Click to collapse
I checked your thread , but there is a part where i have to download Stock ROM for my baseband width and firmware... I dont know what is my baseband ... On the back of the phone only writes model: GT-I9000 and SSN : I9000GSMH... How can i know what is my stock ROM.. I tried with FROYO but still bootloop and no recovery........ I Kill KIES processe when using Odin...... Odin version is 1.83

djoledtc said:
I checked your thread , but there is a part where i have to download Stock please for my baseband width and firmware... I dont know what is my baseband ... On the back of the phone only writes model: GT-I9000 and SSN : I9000GSMH... How can i know what is my stock ROM.. I tried with FROYO but still bootloop and no recovery........ I Kill KIES processe when using Odin...... Odin version is 1.83
Click to expand...
Click to collapse
It is easy to find out, as the codes in the firmware/baseband code are regarding the regions. You can browse in www which is the proper regional code for your country.
Odin 1.83 is compatible, run is as administrator. The ROMs are out of 3 parts. Try to flash one of them as described (choosing proper files for PDA, CSC, Modem plus Pit 512 file) when all ready, run download mode , connect USB cable and start flashing as soon as Odin recognizes your phone. Don't leave it long in download mode waiting as the i9000 seems to have some kind of standby/sleep after 30sec or bit longer.
Remember what Odin displays in the leftmost fields during the flashing and post here (quote my text please / reply) if something goes wrong. Otherwise that proceeding should revive your phone.

tetakpatak said:
It is easy to find out, as the codes in the firmware/baseband code are regarding the regions. You can browse in www which is the proper regional code for your country.
Odin 1.83 is compatible, run is as administrator. The ROMs are out of 3 parts. Try to flash one of them as described (choosing proper files for PDA, CSC, Modem plus Pit 512 file) when all ready, run download mode , connect USB cable and start flashing as soon as Odin recognizes your phone. Don't leave it long in download mode waiting as the i9000 seems to have some kind of standby/sleep after 30sec or bit longer.
Remember what Odin displays in the leftmost fields during the flashing and post here (quote my text please / reply) if something goes wrong. Otherwise that proceeding should revive your phone.
Click to expand...
Click to collapse
Still nothing.... I also tryed some rescue kits with Heimdall, but nothing.. Flashing goes ok, but stiil bootloop and no recovery...... I go into download by volume down+home+power , and download mode is in english so i think it is the real i9000 international and not that chines/korean version of shw m100s.... On the back of my device say i9000gsmh.... Is there any way that i can enter recovery mode ???? i have no more ideas... i read 100 of treads and non helped me.....

xsenman said:
Take a look at My Android Solutions, link below about methods to solve boot loops, if that does not help you can flash a recue kit from My Android collections link below too
No don't use hammer yet, if you are so inclined to do so, feel free to donate it than using the hammer
Check this out! Links to useful Guides and " Banned " Documentaries ​
Click to expand...
Click to collapse
xsenman -- I have same problem like in this treadh http://forum.xda-developers.com/showthread.php?t=2454763
I it posible your sugestion that internal SD card is dead so i always have bootloop and no recovery mode??? Can your post http://forum.xda-developers.com/showpost.php?p=31017954&postcount=5335 help me??? How large SD card do i need ??? 2Gb, 4Gb, 8gb, 16gb?????

It is really strange. Did you ever use ADB?
Try to get connection via ADB and make a logcat to see what the error is.
There are many threads about ADB / SDK

djoledtc said:
xsenman -- I have same problem like in this treadh http://forum.xda-developers.com/showthread.php?t=2454763
I it posible your sugestion that internal SD card is dead so i always have bootloop and no recovery mode??? Can your post http://forum.xda-developers.com/showpost.php?p=31017954&postcount=5335 help me??? How large SD card do i need ??? 2Gb, 4Gb, 8gb, 16gb?????
Click to expand...
Click to collapse
sorry about the delayed response. Actually it looks like your problem is identical to this thread so can you tell me did you use CM updater or did this problem crop up because you down grade from one CM version to another?
In any case lets try and fix the boot loader , flash the JVU bootloader , phone bootloader update ticked with the PIT file (repartition ticked) and see if it boots .
or at least you should be able to get into recovery mode with combo keys after this. IF it did not boot you can flash the JVU ROM again
I doubt this is due to corrupt internal SD card, but maybe its the final option to try in-order to get your phone booting
Check this out! Links to useful Guides and " Banned " Documentaries ​

tetakpatak said:
It is really strange. Did you ever use ADB?
Try to get connection via ADB and make a logcat to see what the error is.
There are many threads about ADB / SDK
Click to expand...
Click to collapse
I am downloading SDK and i will report.....

xsenman said:
sorry about the delayed response. Actually it looks like your problem is identical to this thread so can you tell me did you use CM updater or did this problem crop up because you down grade from one CM version to another?
In any case lets try and fix the boot loader , flash the JVU bootloader , phone bootloader update ticked with the PIT file (repartition ticked) and see if it boots .
or at least you should be able to get into recovery mode with combo keys after this. IF it did not boot you can flash the JVU ROM again
I doubt this is due to corrupt internal SD card, but maybe its the final option to try in-order to get your phone booting
Check this out! Links to useful Guides and " Banned " Documentaries ​
Click to expand...
Click to collapse
I dont know... My friend was updateing kernel and he said he mixed up some ROM and then was this situation = bootloop and recovery.....
I treid your i9000_xwjvu.tar and after Odin flash PASS phone turn off it self and no booting any more and no download mode... Pull baterry for 20sec and noh have only download again...... I will read more of your threads..... If i in the and try to put external SD how large should minimum be??? 2Gb, 4Gb ????

tetakpatak said:
It is really strange. Did you ever use ADB?
Try to get connection via ADB and make a logcat to see what the error is.
There are many threads about ADB / SDK
Click to expand...
Click to collapse
I tried with sdk but computer dont recognise my device.... on adb devices i get nothing.....

Today i got same problem, phone with Cyanogenmod in bootloop, on charger same bootloop. Solved with flashing stock ROM with Odin.
Maybe stupid question, but noone asked it, is your battery charged? Because in bootloop it does not charge the battery. And for flashing you need more then minimum. If you have multimeter measure voltage on battery, if it is 3,7V and less, flasshing will not be done, you need about 3,9V.

ARSiq said:
Today i got same problem, phone with Cyanogenmod in bootloop, on charger same bootloop. Solved with flashing stock ROM with Odin.
Maybe stupid question, but noone asked it, is your battery charged? Because in bootloop it does not charge the battery. And for flashing you need more then minimum. If you have multimeter measure voltage on battery, if it is 3,7V and less, flasshing will not be done, you need about 3,9V.
Click to expand...
Click to collapse
Battery is charged.. I have extrenal charger so I am charging the battery when i read posts .... What ROM did you flash?? link me.....

Did you update in SDK manager sources for your Android version? Check my thread here:
http://forum.xda-developers.com/showthread.php?t=2444308
You will find on the bottom of the OP attached screenshot with red mark where you have to check and download updates.
ADB drivers for Android versions 4.0+ could be not pre-installed and you have to do it manually. So for CM10.x ROMs you shouldn't use ADB (SDK manager) versions older than 1.0.31.
djoledtc said:
I tried with sdk but computer dont recognise my device.... on adb devices i get nothing.....
Click to expand...
Click to collapse

djoledtc said:
I dont know... My friend was updateing kernel and he said he mixed up some ROM and then was this situation = bootloop and recovery.....
I treid your i9000_xwjvu.tar and after Odin flash PASS phone turn off it self and no booting any more and no download mode... Pull baterry for 20sec and noh have only download again...... I will read more of your threads..... If i in the and try to put external SD how large should minimum be??? 2Gb, 4Gb ????
Click to expand...
Click to collapse
ok, can you try flashing them all at one go, as mentioned below ( remove SIM CARD as well as EXT SD Card)
1) Select PIT > 512 PIT (If 'Re-Partition' is not checked under 'Option', check it)
2) Select Bootloader > i9000_xwjvu.tar ( do not tick update phone boot loader)
3. Select PDA > CODE_I9000XXJVU_CL851880_REV03_user_low_ship.tar.m d5
4. Select PHONE > MODEM_I9000XXJVU_REV_00_CL1092175.tar.md5
5. Select CSC > GT-I9000-CSC-MULTI-OXAJVU.tar.md5
EDIT: IF still not booting, flash the CWM semaphore kernel, see if get into CWM recovery
as for using external SD card 8GB or 16 GB will be better, you need a 2GB primary partition (acts as phone memory) and the rest of it as a second partition. (acts as internal SD card)
Check this out! Links to useful Guides and " Banned " Documentaries ​

xsenman said:
ok, can you try flashing them all at one go, as mentioned below ( remove SIM CARD as well as EXT SD Card)
1) Select PIT > 512 PIT (If 'Re-Partition' is not checked under 'Option', check it)
2) Select Bootloader > i9000_xwjvu.tar ( do not tick update phone boot loader)
3. Select PDA > CODE_I9000XXJVU_CL851880_REV03_user_low_ship.tar.m d5
4. Select PHONE > MODEM_I9000XXJVU_REV_00_CL1092175.tar.md5
5. Select CSC > GT-I9000-CSC-MULTI-OXAJVU.tar.md5
EDIT: IF still not booting, flash the CWM semaphore kernel, see if get into CWM recovery
as for using external SD card 8GB or 16 GB will be better, you need a 2GB primary partition (acts as phone memory) and the rest of it as a second partition. (acts as internal SD card)
Check this out! Links to useful Guides and " Banned " Documentaries ​
Click to expand...
Click to collapse
Tried all at one go and didnot help... Still have bootloop and no recovery. i tried semaphore kernels and same results. When i flashed darky karnel then Samsung logo hade some green darky text writen on the bottom of the screen but still the samo problem..... .. I lost all ideas.... If i find some large SD card i will try some solutions with changing internal memory with exSD.....

Related

[Q] cant flash kernel cause i dont know kernel version

cant flash kernel cause i dont know kernel version, but i can just enter to download mode, nothing else, when i enter to recovery and try to install from zip, there is just "instal from zip:update.zip" ,...realy im confused, can anyone help me, tnx
GuestX0020 said:
cant flash kernel cause i dont know kernel version, but i can just enter to download mode, nothing else, when i enter to recovery and try to install from zip, there is just "instal from zip:update.zip" ,...realy im confused, can anyone help me, tnx
Click to expand...
Click to collapse
Need to know what is your phone model and the ROM you are currently using. Check Here to chose your forum/Guide by Version of your phone or you will have more problems by using wrong solutions due to different versions of Galaxy S
you can get a rooting kernel from My Android Collections to get CWM
phone model is samsung galaxy s I9000M , i know it was gingerbread 2.3.3, i think that i acidentaly download a wrong firmware and now i cant turn on mobile, cant even reach "download mode"....is there any way to unbrick it, or something else?
GuestX0020 said:
phone model is samsung galaxy s I9000M , i know it was gingerbread 2.3.3, i think that i acidentaly download a wrong firmware and now i cant turn on mobile, cant even reach "download mode"....is there any way to unbrick it, or something else?
Click to expand...
Click to collapse
try the solutions to get into download mode in My Android Solutions
once in download mode flash i9000M with root from My Android Collections
But First powerdown, pull out Battery, SIM CARD, and EXT.SD card, press power button for a minute, than powerup without SIM and Ext.SD Card....
Tips before Flashing:-
Backup all your important files, contacts, SMS, game data, images etc to PC or Ext SD card. or make Nanadroid Backup If you have CWM
Backup your EFS Folder to PC or Ext SD card
Enable USB Debugging on Phone. Touch menu>Settings>Applications>Development>
Charge your battery to more than 50% before you attempt any sort of flashing.
Disable Samsung KIES when using Odin. Kill Kies.exe, KiesTrayAgent.exe, & KiesPDLR.exe using Task Manager on PC
Use only ROM and solution for your model and Wipe x3
i should try with jig first, if jig dont help me then i should try jtag and software based ressurection, but i dont know what is jtag and software based ressurection, Is software based ressurection the process that follows after jtag, or are separate processes?????
GuestX0020 said:
i should try with jig first, if jig dont help me then i should try jtag and software based ressurection, but i dont know what is jtag and software based ressurection, Is software based ressurection the process that follows after jtag, or are separate processes?????
Click to expand...
Click to collapse
look at My Android Solutions
1) Problem:- Cannot enter Download or Recovery Mode and
25) Problem:- Phone completely DEAD, Not Charging and NO response, only this SEC S5PC110 TEST B/D
all details and guides in them
it is i9000m and its completly dead, i send it to phone servis, to try the ressurection with riff
Problem solved with riff, 300kn aprox. 40€
Sent from my GT-I9100 using xda premium

status 7 error

hello i've been trying 2 get a new rom for my brother's SGS+
but almost every rom i try (mostly jelly bean and ics roms but also some gb ones) give me n error
when i try 2 install them through recovery mode,
i get error status 7, installation aborted
now i looked for this problem on the internet and it appears there r some solutions found on this link:
http://www.knowtechbetter.com/how-t...ry-cwm-while-installing-flashing-custom-roms/
however i did not understand any of this
i m not new in installing roms and such but i m not very femilier with all these "more complicated" things
i noticed at the comments that the first solution helped someone
and it looks easy, if any1 could explain me shortly how do i do this this would be very helpful.
thanks~
Install newer CWM.. you have to ask this in the special thread made for it
broodplank1337 said:
Install newer CWM.. you have to ask this in the special thread made for it
Click to expand...
Click to collapse
i have faemod v1.2 based on cwm 5.0.2.7 ..
and honestly i dont know which threat you are reffering to
Cyanogenmod 10.. There is a link to CWM..
On the wiki page (see the index i made) you can also find CWM and an installation guide.
mrjraider said:
Cyanogenmod 10.. There is a link to CWM..
On the wiki page (see the index i made) you can also find CWM and an installation guide.
Click to expand...
Click to collapse
if u could help me just a little more, i cant find it.
Wiki link http://forum.xda-developers.com/wiki/Samsung_Galaxy_S_Plus/GT-I9001
mrjraider said:
Wiki link http://forum.xda-developers.com/wiki/Samsung_Galaxy_S_Plus/GT-I9001
Click to expand...
Click to collapse
thanks i managed 2 install cwm 6
but i encountered a new problem.
i installed the non-touch verision and now i cant do the "select" option
it is supposed 2 be the power button but it doesnt work
so now i cant do anything..
also i tried rom manager but it just opens recovery mode for me
any way i can return to an old verision of recovery w/o using the reovery mode so i can go back and install the touch verision this time?
There are more buttons to use. If i can remember you need to use the menu button
mrjraider said:
There are more buttons to use. If i can remember you need to use the menu button
Click to expand...
Click to collapse
tried them all.. i am really stuck here
appearntly alot of ppl have this problem.
is there any way to install it through odin or some other app?
Via odin install CWM 5.5.0.4.. See the wikilink i provided.. This one is stable and the homebutton is the choose button.
mrjraider said:
Via odin install CWM 5.5.0.4.. See the wikilink i provided.. This one is stable and the homebutton is the choose button.
Click to expand...
Click to collapse
maybe im doing it wrong but odin doesnt even recognise the file.. and there is no guide there
i did try a odin flashable cwm V6 but its stuck on "setup connection" each time i try..
Le tips:
- Patientce
- Remove and replug device
- Reboot device
- Use another USB port or cable
- Turn kies of (ctrl+alt+del > Taskmanager > Procesess > Terminate anything with KIES in its name)
- Turn AW/FW off
Just flash TWRP and you're good to go
Sent from my GT-I9001 using xda app-developers app
mrjraider said:
Le tips:
- Patientce
- Remove and replug device
- Reboot device
- Use another USB port or cable
- Turn kies of (ctrl+alt+del > Taskmanager > Procesess > Terminate anything with KIES in its name)
- Turn AW/FW off
Click to expand...
Click to collapse
dude im fricking out..
i accidently soft bricked it and now im trying 2 flash it back 2 stock with odin through your guide
but odin recognises my pc recognises the ops file as a text file so odin doesnt even see it...
u gotta help me ;_;
hey man relax... in wiki page you'll find cwm5.5.0.4 flashable zip and you can install it from recovery ( even from stock recovery if i remember corectly)... if you can't acces your phone you can copy it from pc to phone using recovery ( mounts and storage )... if you are stuck in recovery( you're phone boot in recovery only ) you'll need to flash the bootloader using odin.. also you can find the steps and necessary files in wiki and in cm10 by ivendor in firrst post ..Good Luck !!!
1: How did you softbrick it? What did you do, because I thought Odin got stuck??
2: You do see an Phone an ! and a PC?
3: You do have the latest ROM by Samsung and the correct AriesVE.ops?
If yes then we can get started. Follow my guide, when odin gets stuck at System (for a long long time > You know this because the green balk with time gets stuck) unplug device, reboot download again, reboot computer, and try again with BroodROM RC5 (see index)... (BroodROM RC5 is a last resort for our device since it has fixed many softbricked one including mine)
mrjraider said:
1: How did you softbrick it? What did you do, because I thought Odin got stuck??
2: You do see an Phone an ! and a PC?
3: You do have the latest ROM by Samsung and the correct AriesVE.ops?
If yes then we can get started. Follow my guide, when odin gets stuck at System (for a long long time > You know this because the green balk with time gets stuck) unplug device, reboot download again, reboot computer, and try again with BroodROM RC5 (see index)... (BroodROM RC5 is a last resort for our device since it has fixed many softbricked one including mine)
Click to expand...
Click to collapse
see the problem?
http://i39.tinypic.com/amp1ch.png
the thing is even tho i read your guide it seem like im doing something wrong..
for instance when i add the files both ops and "one package" file it doesnt see them so i have to write their location
shahaf321 said:
dude im fricking out..
i accidently soft bricked it and now im trying 2 flash it back 2 stock with odin through your guide
but odin recognises my pc recognises the ops file as a text file so odin doesnt even see it...
u gotta help me ;_;
Click to expand...
Click to collapse
aaaand that's what happens when you start flashing random stuff to your phone without knowing what you actually do...
Ok, I wont tease you or anything, here is what to do:
READ THIS
THIS (all stuff from there, doesn't matter if you don't consider it necessary, you surely will in the future)
After you read all those and understand everything, flash back to stock using @mrjraider tutorial, it's a clear step by step one so follow every step.
Now, the thing is that you'll need CWM Recovery, not FeaMod which is only able to flash GB ROM's.
The most stable CWM recovery is CWM 5.5.0.4 you can find it at the bottom of the OT from this thread
HERE is how to flash CWM with Odin.
Please, pay attention and don't rush things up. And next time you have a problem post in an appropriate thread don't open a new one and especially not in the dev section, see this
Also, no user "gotta help you" you've chose to flash tings to your phone, if you mess it up, it's your own failure and nobody 'MUST' help you... (see this)
educk said:
aaaand that's what happens when you start flashing random stuff to your phone without knowing what you actually do...
Ok, I wont tease you or anything, here is what to do:
READ THIS
THIS (all stuff from there, doesn't matter if you don't consider it necessary, you surely will in the future)
After you read all those and understand everything, flash back to stock using @mrjraider tutorial, it's a clear step by step one so follow every step.
Now, the thing is that you'll need CWM Recovery, not FeaMod which is only able to flash GB ROM's.
The most stable CWM recovery is CWM 5.5.0.4 you can find it at the bottom of the OT from this thread
HERE is how to flash CWM with Odin.
Please, pay attention and don't rush things up. And next time you have a problem post in an appropriate thread don't open a new one and especially not in the dev section, see this
Also, no user "gotta help you" you've chose to flash tings to your phone, if you mess it up, it's your own failure and nobody 'MUST' help you... (see this)
Click to expand...
Click to collapse
i did try using his guide and i folowed it step by step
my only problem is that odin gives me that message i showed in my last post..
also untill i fix this soft brick i cant move on to recovery mode so
i need 2 fix that first..
the guide doesnt show anything related to what im doing wrong..
Someone with brains would have removed odin, and the ops file and redownloaded it again. Also save those on your desktop

[q] download mode exits to stock recovery!!

My friend just gave me his Unbranded Samsung Galaxy S GT-i9000 to fix it.
I used the 3 button combo to access download mode then Odin it but when it boots to download mode it checks the internal mmc and returns an error exiting to stock recovery and I can't adb there no install from sdcard stuff. Need help with accessing download mode!
Error description:
E:failed to mount /dbdata (invalid Argument)
-- Verifying internal MMC block...
E:internal mmc : read fail
# MANUAL MODE #
Anyone can figure this out for me please?
Thank you.
akhrot91 said:
Unbranded Samsung Galaxy S GT-i9000
Click to expand...
Click to collapse
unbranded? check this
download mode is home + power for M110S
recovery ia vol down + home + power for M110S
xsenman said:
unbranded? check this
download mode is home + power for M110S
recovery ia vol down + home + power for M110S
Click to expand...
Click to collapse
Thank you brother, thanks so very much.
I just have another question, now how do I get back to stock ROM? Can you direct me to a guide that tells how to do it via heimdall?
I'm using Ubuntu 13.10 and don't want to run Odin from wine.
Thanks again.
akhrot91 said:
Thank you brother, thanks so very much.
I just have another question, now how do I get back to stock ROM? Can you direct me to a guide that tells how to do it via heimdall?
I'm using Ubuntu 13.10 and don't want to run Odin from wine.
Thanks again.
Click to expand...
Click to collapse
you need to flash Repair kit for M110S, download from PIT STOP link below and use this method
xsenman said:
you need to flash Repair kit for M110S, download from PIT STOP link below and use this method
Click to expand...
Click to collapse
I flashed Repair kit for M110S through heimdall suite. The Download mode has changed to korean language and now whatever combination I press it goes to download mode even by simply pressing the power button it goes to download mode.
Can you help me with that?
Should I try again on Windows OS with Odin?
akhrot91 said:
I flashed Repair kit for M110S through heimdall suite. The Download mode has changed to korean language and now whatever combination I press it goes to download mode even by simply pressing the power button it goes to download mode.
Can you help me with that?
Should I try again on Windows OS with Odin?
Click to expand...
Click to collapse
First I hope you had ensured that it was actually an M110S and not another variation of i9000
yes, Korean phones always have everything in Korean, but once having a boot-able ROM, you can use settings menu to change to English. which repair kit did you use? , as long as its in download mode you should be able to flash again, either with Odin3 or heimdall. also what stage of flashing did you complete .
just flash again but make sure you have ample battery charge, as power failure or pulling out usb connection can break the bootloader and you will have a big headache , hard bricking it and only a technician with JTAG can recover it.
xsenman said:
First I hope you had ensured that it was actually an M110S and not another variation of i9000
yes, Korean phones always have everything in Korean, but once having a boot-able ROM, you can use settings menu to change to English. which repair kit did you use? , as long as its in download mode you should be able to flash again, either with Odin3 or heimdall. also what stage of flashing did you complete .
just flash again but make sure you have ample battery charge, as power failure or pulling out usb connection can break the bootloader and you will have a big headache , hard bricking it and only a technician with JTAG can recover it.
Click to expand...
Click to collapse
I used the link from this under the 'first stage heading'. This is the repair kit.
Yes, I can only access download mode now it doesn't go anywhere else. I completed all four stages but as you have shown in the picture it didn't go to that update screen.
akhrot91 said:
I used the link from this under the 'first stage heading'. This is the repair kit.
Yes, I can only access download mode now it doesn't go anywhere else. I completed all four stages but as you have shown in the picture it didn't go to that update screen.
Click to expand...
Click to collapse
Ok, when you complete first stage does your phone boot up using the Eclair ROM? I normal circumstances it should? you say you completed all four stages, , was the flashing completed as successful in ODin3 and your phone rebooted into download mode?
If so try and check your USB port on your phone if you have any lint or anything that may be shorting them and did this phone got in contact with water?
cause what you say is rather strange for any unit as a successful flash can endup in some sort of boot process and never into download mode.
xsenman said:
Ok, when you complete first stage does your phone boot up using the Eclair ROM? I normal circumstances it should? you say you completed all four stages, , was the flashing completed as successful in ODin3 and your phone rebooted into download mode?
If so try and check your USB port on your phone if you have any lint or anything that may be shorting them and did this phone got in contact with water?
cause what you say is rather strange for any unit as a successful flash can endup in some sort of boot process and never into download mode.
Click to expand...
Click to collapse
Firstly I flashed all the files through heimdall in ubuntu not Odin3.
And at no stage it returned any error. At the first stage the download mode was in english on the phone, it had a yellow triangle and below it was saying "downloading" after I flashed the korean .pit file the phone rebooted back into download mode but the text below the yellow triangle was now in korean. After every flash the phone returned into download mode.
I checked as you said, the problem is before I knew the "Home + Power" button combo to access the download mode the phone booted to Samsung screen and hung there and now it goes no where except the korean download mode.
Deleted!
Okay I've figured out the problem with my phone.
When I was on the first stage when I entered the m110.pit file along with the PDA file. The PDA file had a movinand.mst file, while flashing with odin3 it got stuck on the movinand.mst part and remained stuck forever so I plugged out and restarted in download mode.
I did some googling and found out that this problem is related to internal memory damage or corruption or something like that.
Anyway I finally found out a GB file on some forum I don't remember and flashed it over my galaxy S and it kind of worked. When the phone is powered on it goes to the 'samsung anycall' screen and stays there for a while and at the bottom of the screen comes a progress bar, when it goes full the bootanimation comes up and the phone boots into the ROM. Now the problem is there is no internal memory so no apps are downloaded plus whenever I restart the phone it comes to that samsung anycall screen with the progress bar and then the bootanimation but the phone starts as if it were new, like the initial setup accounts and all and also reverted back to korean language. Is there anyway to fix the internal memory problem or any alternative?
Thanks once again for helping me out this much.
Can you tell me what actually is written under your battery ? as what you are indicating about this units behavior is rather strange and have not come across this on an M110S, and mind you I have help a lot of people to solve their problems on M110S units and tens of thousands had downloaded the repair kit from my upload site. Why I am asking is because I am in doubt as to what is your model? is it an M110S, or i9000 variation or a chinese clone?
this must be cleared , in order to get your phone functioning as remedies for it will vary
Hey. Now I tried flashing with odin3 and here's what happened:
1. After the first stage it should boot into eclair but instead samsung anycall screen comes up and then it goes into recovery with the following output:
E: can't mount /dev/block/st111 (invalid Argument)
# MANUAL MODE #
E: can't mount /dev/block/st111 (invalid Argument)
E: can't mount /dev/block/st111 (invalid Argument)
ok this means you have a cache partition problem , meaning stl11 is the cache partition that is not mounting as such you cannot boot, so lets try this ( remove external SD card, sim card etc and Flash the cache.rfs as below..flash it twice and let me know the result.
Problem:- Getting this when you boot
E:format_volume: rfs format failed on /dev/block/stl11
Solution:- Flash a cache.rfs file meant for your model as PDA with Odin. For i9000 i9000 cache.rfs file, For M110S M110s Cache.rfs
or Flash a Rescue Kit from My Android Collections
Click to expand...
Click to collapse
Click to expand...
Click to collapse
2. I proceeded to the next two stages and flashed the files but still the same.
well, when you get a problem like above, there is no way it can boot until it is resolved, but its has booted into recovery, that is what it should do, not go into download mode.
3. When I press the power button only it goes to the samsung anycall screen and then same happens what i described in 1.
Suggest you flash the cache.rfs for M110S, see if it solves it, If not repeat stage 1 again using the repair kit with the PIT and repartition TICKED using Odin3 see what happens.
---------- Post added at 07:32 AM ---------- Previous post was at 07:23 AM ----------
akhrot91 said:
Is there anyway to fix the internal memory problem or any alternative? Thanks once again for helping me out this much.
Click to expand...
Click to collapse
You need to read the posts on PIT STOP about ways to solve internal memory problem. Look under "Solutions for Android problems " also My Android Solutions, link below.
Click to expand...
Click to collapse
xsenman said:
Can you tell me what actually is written under your battery ? as what you are indicating about this units behavior is rather strange and have not come across this on an M110S, and mind you I have help a lot of people to solve their problems on M110S units and tens of thousands had downloaded the repair kit from my upload site. Why I am asking is because I am in doubt as to what is your model? is it an M110S, or i9000 variation or a chinese clone?
this must be cleared , in order to get your phone functioning as remedies for it will vary
Hey. Now I tried flashing with odin3 and here's what happened:
1. After the first stage it should boot into eclair but instead samsung anycall screen comes up and then it goes into recovery with the following output:
E: can't mount /dev/block/st111 (invalid Argument)
# MANUAL MODE #
E: can't mount /dev/block/st111 (invalid Argument)
E: can't mount /dev/block/st111 (invalid Argument)
ok this means you have a cache partition problem , meaning stl11 is the cache partition that is not mounting as such you cannot boot, so lets try this ( remove external SD card, sim card etc and Flash the cache.rfs as below..flash it twice and let me know the result.
Problem:- Getting this when you boot
E:format_volume: rfs format failed on /dev/block/stl11
Click to expand...
Click to collapse
2. I proceeded to the next two stages and flashed the files but still the same.
well, when you get a problem like above, there is no way it can boot until it is resolved, but its has booted into recovery, that is what it should do, not go into download mode.
3. When I press the power button only it goes to the samsung anycall screen and then same happens what i described in 1.
Suggest you flash the cache.rfs for M110S, see if it solves it, If not repeat stage 1 again using the repair kit with the PIT and repartition TICKED using Odin3 see what happens.
---------- Post added at 07:32 AM ---------- Previous post was at 07:23 AM ----------
You need to read the posts on PIT STOP about ways to solve internal memory problem. Look under "Solutions for Android problems " also My Android Solutions, link below.
Click to expand...
Click to collapse
The back of my phone behind the battery reads:
MODELO: GT-i9000
FCC ID: A3LGTI9000
SSN: I9000T GSMH
I think its a M110S.
The cache problem is over. I told that in my previous post.
Okay I've figured out the problem with my phone.
When I was on the first stage when I entered the m110.pit file along with the PDA file. The PDA file had a movinand.mst file, while flashing with odin3 it got stuck on the movinand.mst part and remained stuck forever so I plugged out and restarted in download mode.
I did some googling and found out that this problem is related to internal memory damage or corruption or something like that.
Anyway I finally found out a GB file on some forum I don't remember and flashed it over my galaxy S and it kind of worked. When the phone is powered on it goes to the 'samsung anycall' screen and stays there for a while and at the bottom of the screen comes a progress bar, when it goes full the bootanimation comes up and the phone boots into the ROM. Now the problem is there is no internal memory so no apps are downloaded plus whenever I restart the phone it comes to that samsung anycall screen with the progress bar and then the bootanimation but the phone starts as if it were new, like the initial setup accounts and all and also reverted back to korean language. Is there anyway to fix the internal memory problem or any alternative?
Thanks once again for helping me out this much.
Click to expand...
Click to collapse
akhrot91 said:
The back of my phone behind the battery reads:
MODELO: GT-i9000
FCC ID: A3LGTI9000
SSN: I9000T GSMH
I think its a M110S.
Click to expand...
Click to collapse
The scam artists who have converted M110S to i9000 use I9000GSMH and will not indicate the FCC or SSN
yours says its an i9000T and there is such a model, look http://forum.xda-developers.com/wiki/Samsung_Galaxy_S/GT-I9000T
so best to check your IMEI number , follow this link to identify your model
anyway so long as your phone works its not a serious problem, but wrong ROMs can give you differing problems so ensure your unit is M110S before using solutions in PIT STOP
xsenman said:
The scam artists who have converted M110S to i9000 use I9000GSMH and will not indicate the FCC or SSN
yours says its an i9000T and there is such a model, look http://forum.xda-developers.com/wiki/Samsung_Galaxy_S/GT-I9000T
so best to check your IMEI number , follow this link to identify your model
anyway so long as your phone works its not a serious problem, but wrong ROMs can give you differing problems so ensure your unit is M110S before using solutions in PIT STOP
Click to expand...
Click to collapse
The IMEI site says my IP is blocked. I tried proxying but still doesn't give me the result.
What about the internal memory problem? And sd-card not reading!!
How do I solve that?
akhrot91 said:
The IMEI site says my IP is blocked. I tried proxying but still doesn't give me the result.
What about the internal memory problem? And sd-card not reading!!
How do I solve that?
Click to expand...
Click to collapse
Already mentioned in earlier post, look in PIT STOP for guide to solve internal SD card problems
Try this links to check iMEI
xsenman said:
Already mentioned in earlier post, look in PIT STOP for guide to solve internal SD card problems
Try this links to check iMEI
Click to expand...
Click to collapse
Okay. And I went through your post in the PIT STOP for internal sd problem.
I just need help with installing CWM and getting root as I cannot install the kernel WF07 speedMode application on the phone as no internal or external card.
Thank you loads for your help!!
akhrot91 said:
I just need help with installing CWM and getting root as I cannot install the kernel WF07 speedMode application on the phone as no internal or external card. /QUOTE]
you need to post screen shots or the contents of
1) settings > about phone ??? all details
2) settings >storage ??? all details
for me to give you solutions
Click to expand...
Click to collapse
I hope the pictures are clear as I can't take screenshots because of Storage problems.
akhrot91 said:
I hope the pictures are clear as I can't take screenshots because of Storage problems.
Click to expand...
Click to collapse
ok, the ROM you had flashed is obsolete, you nee to flash WF07 ( download link in PIT STOP) but before you do that, go into settings>storage and erase SD card, and Format where possible also you must follow the instruction given in flashing guide ( First post concerning repair kit) to the dot, meaning you need to factory reset (settings >privacy) as well as wipe everything and format everything prior to flashing WF07 and also wipe again after flashing.
Only after this you should look at other problems ( Internal SD card)
Its also best to USE the repair kit again and after flashing Ist stage , flash the WF07 ROM ( its the best ROM for the M110S)

[Q] [HELP] Samsung I9001 impossible to recover :(

Hello everybody,
Ok, here's the deal, my samsung galaxy s plus (I9001) is in a continuous bootloop of the samsung logo, doesnt charge, no recovery mode, and the only thing i can use is download mode.
So i've tried flashing inumerous ROMS (stock and custom ones) and nothing works, i've also tried to replace the boot loader but still nothing. I've also tried to see if the problem had anything to do with the eMMC, and once again i failed. Oh, and i also tried to unbrick it using this method: http://forum.xda-developers.com/showthread.php?t=2216996&highlight=userdata+img+ext4
I can't really deal with this by myself cause i've tried everything i could and still got no progress whatsoever.
SOMEONE HELP ME THIS PHONE IS DRIVING ME INSANE!
Thanks in advance.
KaJ116 said:
SOMEONE HELP ME THIS PHONE IS DRIVING ME INSANE!
Click to expand...
Click to collapse
Download a i9001 ver 6 CWM from [Toolkit][A.I.O Rescue & Recovery] My Android Collection, flash it using Odin with areiesVe.ops ( untick auto reboot in Odin) . After remove battery and insert, reboot in CWM, and format every partition ( also do not reboot) power off, remove battery, insert , enter download mode and flash a i9001 stock ROM & boot loader (tick, update bootloader) with ariesVe.ops
Check this out! Links to useful Guides and " Banned " Documentaries ​
xsenman said:
Download a i9001 ver 6 CWM from [Toolkit][A.I.O Rescue & Recovery] My Android Collection, flash it using Odin with areiesVe.ops ( untick auto reboot in Odin) . After remove battery and insert, reboot in CWM, and format every partition ( also do not reboot) power off, remove battery, insert , enter download mode and flash a i9001 stock ROM & boot loader (tick, update bootloader) with ariesVe.ops
Check this out! Links to useful Guides and " Banned " Documentaries ​
Click to expand...
Click to collapse
Thanks for your response! I'm going to try it, i'll post the results later. THANK YOU! :angel:
[UPDATE]
I've flashed the CWM like you said but the phone still doesnt boot into recovery. I couldnt find the odin version on the link you wrote so i used this one:
"cwm 6037:
http://rapidgator.net/file/6ccfef8e2...31dfeec6711b72"
dont know if it changes anything, i'm just saying so you understand the procedure fully.
Ok, so I tried a couple more times and the phone still doesnt go into recovery. All i see is "Samsung... Samsung... Samsung" and it's tripping me out.
Please help me out, it's been really frustrating cause I've tried EVERYTHING and still no progress has been made.
KaJ116 said:
Ok, so I tried a couple more times and the phone still doesnt go into recovery. All i see is "Samsung... Samsung... Samsung" and it's tripping me out.
Please help me out, it's been really frustrating cause I've tried EVERYTHING and still no progress has been made.
Click to expand...
Click to collapse
here you go
i9001 CMW 5.5
i9001 CWM 6.0 for amss.mbn download.. problems on Odin 4.43
i9001 Touch CWM 6.0
i9001 TWRP 2.3.1.1 Recovery
i9001 RZrecovery Not CWM
or Reboot tool using PC
you can try any of the above to enter recovery mode
I hope you are using the correct key press on your phone for recovery mode, or if its possible the keys are broken? try the reboot tool to acess it than .
Check this out! Links to useful Guides and " Banned " Documentaries ​
xsenman said:
here you go
i9001 CMW 5.5
i9001 CWM 6.0 for amss.mbn download.. problems on Odin 4.43
i9001 Touch CWM 6.0
i9001 TWRP 2.3.1.1 Recovery
i9001 RZrecovery Not CWM
or Reboot tool using PC
you can try any of the above to enter recovery mode
I hope you are using the correct key press on your phone for recovery mode, or if its possible the keys are broken? try the reboot tool to acess it than .
Check this out! Links to useful Guides and " Banned " Documentaries ​
Click to expand...
Click to collapse
I know i've been using the correct keys, i've confirmed before, started doubting about that a while ago but everything is alright and the keys are not broken :s
Also, i cant use the repair tool cause the phone doesnt even turn on. It doesnt do anything besides the samsung logo and download mode. Nothing.
I've tried those and still nothing.
Any other solutions? I'm so sorry for being a pain, but the phone isnt helping, i already thought of throwing it against a wall but it wouldn't do much good. Thanks in advance, once again.
KaJ116 said:
I know i've been using the correct keys, i've confirmed before, started doubting about that a while ago but everything is alright and the keys are not broken :s
Also, i cant use the repair tool cause the phone doesnt even turn on. It doesnt do anything besides the samsung logo and download mode. Nothing.
I've tried those and still nothing.
Any other solutions? I'm so sorry for being a pain, but the phone isnt helping, i already thought of throwing it against a wall but it wouldn't do much good. Thanks in advance, once again.
Click to expand...
Click to collapse
The reboot tool, will do the job from your PC, as long as you can enter download mode and connect to odin, it should be possible, did you try it?
all other solutions are in [Tutorial][A.I.O. Rescue & Recovery] My Android Solutions. [Help & Troubleshooting
Check this out! Links to useful Guides and " Banned " Documentaries ​
xsenman said:
The reboot tool, will do the job from your PC, as long as you can enter download mode and connect to odin, it should be possible, did you try it?
all other solutions are in [Tutorial][A.I.O. Rescue & Recovery] My Android Solutions. [Help & Troubleshooting
Check this out! Links to useful Guides and " Banned " Documentaries ​
Click to expand...
Click to collapse
I tried using the reboot tool via download mode and nothing worked. Tried to reflash again the clockwork recovery, saw all your solutions from your thread and nothing turns my phone on !
Also tried this http://forum.xda-developers.com/showthread.php?t=1932327 but no luck(live everyting!)
KaJ116 said:
I tried using the reboot tool via download mode and nothing worked. Tried to reflash again the clockwork recovery, saw all your solutions from your thread and nothing turns my phone on !
Also tried this http://forum.xda-developers.com/showthread.php?t=1932327 but no luck(live everyting!)
Click to expand...
Click to collapse
Than the only other option, is to use a Riff box, meaning you need to take it to a mobile technician to try and flash the board internally., since nothing works. sorry, it could be due to hardware failure, since software solutions are not working for you.
Check this out! Links to useful Guides and " Banned " Documentaries ​
xsenman said:
Than the only other option, is to use a Riff box, meaning you need to take it to a mobile technician to try and flash the board internally., since nothing works. sorry, it could be due to hardware failure, since software solutions are not working for you.
Check this out! Links to useful Guides and " Banned " Documentaries ​
Click to expand...
Click to collapse
Thanks men, i think i m going to buy a xiaomi mi3 phone. This one is dead, RIP hihi
Thanks A LOT for your help

[Q] Gt-I8190 partitionning lost. Please HELP

Hi guys, newbie here trying not to brick my s3 mini any more than it is.
It all started with the lack of mobile signal, so i changed the sim card-didn't work
After a hard reset it got worse, as i got a black popup on my screen :
PDA: I8190XXAMG4
Phone : XXXX
CSC : NONE
H/W : Not Active
EF Cal Date : NONE
SMD : 01N, PBA : 04N
CAMERA : N/A, FrontCam : N/A
TSP : 0X11
TSK : 0x19
Band : GPRS, CH : N/A
UART : N/A, USB : N/A
Also, the phone will not go in recovery mode anymore, only on download mode.
I tried flashing a stock firmware with Odin, but no change. The thing is, after the phone restarts, it loses any settings i made (like wireless password, google account, etc), so if i check USB in debugging mode, after restart it will be unchecked again, so for that reason i'm not sure if the reflashing worked.
In download mode it says:
custom binary download: no
current binary:Samsung official
system status: official
At the bottom of the page: HW REV: 0x5
As far as I understand after reading the forum for about 8 hours, i've lost the partitioning of the device.
If any of you has any idea what i could do, please advise.
there are a few threads on how to fix your problem
some more reading involved
efaustino84 said:
there are a few threads on how to fix your problem
some more reading involved
Click to expand...
Click to collapse
Can you please be more specific?
i"ve been looking through the topics and couldn't find anything.
Getting a bit desperate here...bought the phone a couple of weeks ago and i don't really afford another one
Can anyone please help me?:crying:
kstk said:
Can anyone please help me?:crying:
Click to expand...
Click to collapse
refer to the threads on loading stock ROM using ODIN
those will provide you with the information to repair the phone in it's current state
you will then be able to fix the partition
Ok. So I tried numerous times to upload the stock software but absolutely nothing happens, even if ODIN says that the upload was successful. As soon as the phone restarts, it loses any settings i had done, including USB debugging mode, so maybe this is why it doesn't work. I tried selecting a CSC, but after restart it's still:''none''.
The thing is that wireless is working, so i can connect to internet, but i cannot download and install anything (no space). I will try and download an emulator via PC and put it on a memory card.
Of course, it won't read my memory card :|
kstk said:
Of course, it won't read my memory card :|
Click to expand...
Click to collapse
post a screen shot of the options you have enabled when loading via odin
efaustino84 said:
post a screen shot of the options you have enabled when loading via odin
Click to expand...
Click to collapse
here it is
kstk said:
here it is
Click to expand...
Click to collapse
all settings are ok, so flash it via Odin
AND start Odin as Admin dude
I even tried with a pit file and re-partition checked. No result.
Just flashed again with Odin started as admin. No change.
kstk said:
Just flashed again with Odin started as admin. No change.
Click to expand...
Click to collapse
i had similar problems a few months ago. So what did i do:
download the " i8190_buttonenable_cwm6.0.2.7.tar " from HERE (see attached files) and flash it via Odin (as admin)
download This rom "I8190 серв. укр.rar" from the same side and follow the instructions.
you will get a branded lafleur rom (russian), set it to your language at setup.
put any rom as zip you like on your device.
reboot into recovery with vol. up + home + power
fullwipe and flash any rom (as zip) you want.
HTH
MJ
JackoMJ said:
i had similar problems a few months ago. So what did i do:
download the " i8190_buttonenable_cwm6.0.2.7.tar " from HERE (see attached files) and flash it via Odin (as admin)
download This rom "I8190 серв. укр.rar" from the same side and follow the instructions.
you will get a branded lafleur rom (russian), set it to your language at setup.
put any rom as zip you like on your device.
reboot into recovery with vol. up + home + power
fullwipe and flash any rom (as zip) you want.
HTH
MJ
Click to expand...
Click to collapse
Just tried that, it didn't work. It's like i didn't do anything at all.
I just can't write anything on this thing
Anyway, thank you very much, guys. Any more ideas are welcome :
Was i supposed to have F. reset time checked as well?
JackoMJ said:
all settings are ok, so flash it via Odin
AND start Odin as Admin dude
Click to expand...
Click to collapse
actually given the fact that he has lost the partition those setting are not enough in my opinion
i would say load up the pit file as well as enable re-partition
efaustino84 said:
actually given the fact that he has lost the partition those setting are not enough in my opinion
i would say load up the pit file as well as enable re-partition
Click to expand...
Click to collapse
I did load the pit file and enabled the re-partition. It just doesn't change anything.
This last week it was taken back to the place i bought it from (pawn shop ), and of course, they all say (the experts they took it to) that i did something to it, and it can't be fixed, and of course it's my fault.All i did was to reset it.
Anyway, I'm still hoping to get it fixed myself, with your help, guys.
Thanks.
kstk said:
I did load the pit file and enabled the re-partition. It just doesn't change anything.
This last week it was taken back to the place i bought it from (pawn shop ), and of course, they all say (the experts they took it to) that i did something to it, and it can't be fixed, and of course it's my fault.All i did was to reset it.
Anyway, I'm still hoping to get it fixed myself, with your help, guys.
Thanks.
Click to expand...
Click to collapse
Is it booting normaly or just download mode?
Sent through time and space from my s3mini/CM11
tys0n said:
Is it booting normaly or just download mode?
Sent through time and space from my s3mini/CM11
Click to expand...
Click to collapse
It is booting normally, but it takes very long to boot.
kstk said:
It is booting normally, but it takes very long to boot.
Click to expand...
Click to collapse
You still got that FactoryApp popup on screen?
Are you rooted?
Can you enter recovery? If so, what recovery do you have?

Categories

Resources