Related
Hey,
I tried to flash my Samsung GT-9000 2.2.1 with " CF-Root-XX_OXA_JVK-v3.1-CWM3RFS " over the mobile Odin the phone did restart and I think it done the flash, but I'm not sure. Now my phone has the boot loop. I can't enter the recovery mode but the download mode is available. USB- Debugging is OFF.
I tried several times to flash over Odin3 with the last firmware but it stucks and I tried to PIT with 512 over Odin and it stucks too after File analysis.
Here a screenshot:
scrobly.com/BBUQWDstLsiuTGiUiKoJ
Click to expand...
Click to collapse
I did search for solutions but they didn't worked. Maybe you did have the same problem and knows a solution.
thanks
have a look here http://forum.xda-developers.com/showpost.php?p=30415128&postcount=1
Yes I did look there but the solutions didnt work. I had flashed my phone with heimdall and now its works. Odin is ****.
UPDATE:
After 2 weeks of searching, waiting, pain and suffering from the absence of my beloved I9000, i just discovered that the real reason of all this is because the phone was wet, it's not because the battery have died or because of the CyanogenMod nightly build, it was just water...
Currently the phone is being repaired by a phone technician, but i frankly doesn't have too much hope ...
thank you
Click to expand...
Click to collapse
Hello everyone,
i was facing a big problem the last couple of days, my phone wont turn on, and recovery and download modes doesn't work
(it just happened after phone battery died)
PS :
i was using Cyanogenmod (am not sure what version exactly)
anyway,
after looking here and there, i managed to get the download mode working, so i followed these steps to get back on stock rom :
http://roms.android-emotions.com/stock-rom-2-3-6-for-samsung-galaxy-s-i9000/
IMPORTANT!!
i wanted to follow the steps on the thread of the xda galaxyS forum,
http://forum.xda-developers.com/showthread.php?t=818556
but the link that must lead to the file " I9000XXJVQ_by_Virnik.rar " doesn't work
it keeps downloading "iLividSetup-r484-n-bc"
what's wrong with that ?
anyway,
after follow the other instructions, i get the green "PASS" and the phone try to reboot but it get stuck on the samsung galaxy home screen, it just stay there for ever, and there is no "Reboot" in the Odin Log
i tried this instructions too :
http://forum.xda-developers.com/showthread.php?t=1922505
but it stay for ever on "Setup Connection"
and like always the recovery mode doesn't work
any help please ???
thank you
alaslipknot said:
stay for ever on "Setup Connection"
and like always the recovery mode doesn't work
any help please ???
thank you
Click to expand...
Click to collapse
Just enter download mode and make sure you kill KIES on your PC, so that your setup connection problem will end and after that flash the gingerbread stock ROM as described in this tutorial
Check this out! Links to useful Guides and " Banned " Documentaries
xsenman said:
Just enter download mode and make sure you kill KIES on your PC, so that your setup connection problem will end and after that flash the gingerbread stock ROM as described in this tutorial
Check this out! Links to useful Guides and " Banned " Documentaries
Click to expand...
Click to collapse
Thank you,
i did killed KIES but still stack in setup connection, for the url, i can't say my phone model, there is nothing under the battery, however i bought it from Italy could that help ?
thank you for the help
UPDATE
i used another Odin version (1.83) and all the step of the flash process worked exactly as expected, the only thing is that the phone is still stacked in booting loop :/
@xsenman
i can't understand your thread :/ there is a lot of thing there that i don't know or don't have or both ...
please help
alaslipknot said:
UPDATE
i used another Odin version (1.83) and all the step of the flash process worked exactly as expected, the only thing is that the phone is still stacked in booting loop :/
@xsenman
i can't understand your thread :/ there is a lot of thing there that i don't know or don't have or both ...
please help
Click to expand...
Click to collapse
Check My Android Solutions. link below to solve boot loops , My thread is a total guide to upgrade from froyo to Jelly bean so it has a lot of details broken down under specific items so read only what you want to do since you are in gingerbread you only need to flash the JVU ROM and after that the JVU CWM kernel. I thought it was simple guide.
Check this out! Links to useful Guides and " Banned " Documentaries
xsenman said:
since you are in gingerbread you only need to flash the JVU ROM and after that the JVU CWM kernel. I thought it was simple guide.
Click to expand...
Click to collapse
okay i'll try,
just one question,
what is the difference between : "i9000 JVU ROM with i9000 JVU CF ROOT Kernel" and " i9000 Rescue kit" ???
thank you
alaslipknot said:
okay i'll try,
just one question,
what is the difference between : "i9000 JVU ROM with i9000 JVU CF ROOT Kernel" and " i9000 Rescue kit" ???
thank you
Click to expand...
Click to collapse
the JVU ROM, has a JVU kernel but it does not have CWM or Root, flashing the CF root kernel gives you root and most of all CWM recovery , which is needed in order to upgrade to ICS or Jelly Bean or Kit Kat.
i9000 rescue kit may contain just stock ROM and kernel, the version will depend on the kit, its more or less the stock ROM
Check this out! Links to useful Guides and " Banned " Documentaries
xsenman said:
the JVU ROM, has a JVU kernel but it does not have CWM or Root, flashing the CF root kernel gives you root and most of all CWM recovery , which is needed in order to upgrade to ICS or Jelly Bean or Kit Kat.
i9000 rescue kit may contain just stock ROM and kernel, the version will depend on the kit, its more or less the stock ROM
Check this out! Links to useful Guides and " Banned " Documentaries
Click to expand...
Click to collapse
okay thanx, am downloading the JVU ROM (it's the right choice isn't ? )
@xsenman
Question :
after which you repeat steps one and two
Click to expand...
Click to collapse
does it mean that i have to restart Odin ??? so the other "options" (PDA,Phone,GSC) are empty ? or i should do the PIT step and keeping the others ??
alaslipknot said:
@xsenman
Question :
does it mean that i have to restart Odin ??? so the other "options" (PDA,Phone,GSC) are empty ? or i should do the PIT step and keeping the others ??
Click to expand...
Click to collapse
it means , you restart odin and just flash select the kernel as PDA (others are empty) and press start, do not tick anything
sorry my connection is very slow and bad today, so my response is bad
Check this out! Links to useful Guides and " Banned " Documentaries
xsenman said:
it means , you restart odin and just flash select the kernel as PDA (others are empty) and press start, do not tick anything
sorry my connection is very slow and bad today, so my response is bad
Click to expand...
Click to collapse
it's okay there is no need to apologize,
Update :
i kept the phone charging for 6 hours, re-do all the steps again, all ended with success, however the phone still stacked on boot screen and recovery mode doesn't work
thank you
alaslipknot said:
i kept the phone charging for 6 hours, re-do all the steps again, all ended with success, however the phone still stacked on boot screen and recovery mode doesn't work
Click to expand...
Click to collapse
If you've used some custom ROM with different system partitions, you have to flash the PIT file together with the stock ROM and your i9000 will work again.
Check my thread, whole unbricking is described step by step there and all download links are still active. It should revive your i9000. If it helps, post in the thread that it helped.
http://forum.xda-developers.com/showthread.php?t=2444308
tetakpatak said:
If you've used some custom ROM with different system partitions, you have to flash the PIT file together with the stock ROM and your i9000 will work again.
Check my thread, whole unbricking is described step by step there and all download links are still active. It should revive your i9000. If it helps, post in the thread that it helped.
http://forum.xda-developers.com/showthread.php?t=2444308
Click to expand...
Click to collapse
Your post looks very informative and i will defenetly follow through, but there is 1 problem, which i think is a big problem, i can't tell my phone version; all i know that i have Galaxy S I9000, i cannot know the IMEI number because the one who gave me the phone has removed the "paper" on the back :
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
and the battery doesn't have anything useful on it, so maybe the whole problem is that i was using the wrong stock firmware ??
thank you
alaslipknot said:
Your post looks very informative and i will defenetly follow through, but there is 1 problem, which i think is a big problem, i can't tell my phone version; all i know that i have Galaxy S I9000, i cannot know the IMEI number because the one who gave me the phone has removed the "paper" on the back :
and the battery doesn't have anything useful on it, so maybe the whole problem is that i was using the wrong stock firmware ??
thank you
Click to expand...
Click to collapse
yup, this would be an issue, that needs sorting out first, so use ADB, hope you have some knowledge about it, if not go here
than use ADB to pull the Build prop, after which open it with a notepad to see what model is your phone
the command would be adb pull /system/build.prop C:\ to pull it from your phone to your PC hard drive
you can also check if it has a backup file called build.prop.bak , pull that too
once you know for sure, than it would be better and easier to resolve.
Check this out! Links to useful Guides and " Banned " Documentaries
xsenman said:
to use ADB go here
Click to expand...
Click to collapse
Thanks, xsenman, that is really amazing guide. It would have saved me so much time if I have found it some time ago!
xsenman said:
yup, this would be an issue, that needs sorting out first, so use ADB, hope you have some knowledge about it, if not go here
than use ADB to pull the Build prop, after which open it with a notepad to see what model is your phone
Click to expand...
Click to collapse
Just a question,
would ADB work with my phone ? the phone get only recognized on download mode + isn't supposed to turn on USB Debugging mode ??
so since the phone is bricked
is that really gonna work ??
alaslipknot said:
Just a question,
would ADB work with my phone ? the phone get only recognized on download mode + isn't supposed to turn on USB Debugging mode ??
so since the phone is bricked
is that really gonna work ??
Click to expand...
Click to collapse
just try and hope for the best.
Check this out! Links to useful Guides and " Banned " Documentaries
xsenman said:
just try and hope for the best.
Check this out! Links to useful Guides and " Banned " Documentaries
Click to expand...
Click to collapse
Code:
adb devices
doesn't show anything (phone recognized in Odin, all Kies are off )
what now :/ ??
Question :
when i changed to CyanogenMod i don't remember being worried about device specific model, i just choose the I9000 firmware and everything worked fine, can't i just do the same now ??? it's not necessary to go back to the original firmware i just want the phone to work again...
it really sucks man i have been fighting this problem for days now and nothing worked, and what is really annoying is that there is no hardware issue, when WindowsXp doesn't find that small boot.ini file it's very easy to quickly repaired with Xp cd or just re-install the system again, but in my case here, instead of doing that, i guess i'll have to buy a new phone ?? why ?
alaslipknot said:
Code:
adb devices
doesn't show anything (phone recognized in Odin, all Kies are off )
what now :/ ??
Question :
when i changed to CyanogenMod i don't remember being worried about device specific model, i just choose the I9000 firmware and everything worked fine, can't i just do the same now ??? it's not necessary to go back to the original firmware i just want the phone to work again...
it really sucks man i have been fighting this problem for days now and nothing worked, and what is really annoying is that there is no hardware issue, when WindowsXp doesn't find that small boot.ini file it's very easy to quickly repaired with Xp cd or just re-install the system again, but in my case here, instead of doing that, i guess i'll have to buy a new phone ?? why ?
Click to expand...
Click to collapse
you need to get into recovery mode to flash a custom ROM, so here is what you can do flash a semaphore kernel as before , untick "reboot" in Odin3 when flashing, after that pull out battery, reinsert and use combo keys for CWM recovery mode
In CWM you can flash the CM ICS ROM, as mentioned in that guide to get your phone booting :fingers-crossed:
Check this out! Links to useful Guides and " Banned " Documentaries
xsenman said:
you need to get into recovery mode to flash a custom ROM, so here is what you can do flash a semaphore kernel as before , untick "reboot" in Odin3 when flashing, after that pull out battery, reinsert and use combo keys for CWM recovery mode
Click to expand...
Click to collapse
alright just to make sure that am doing it the right way :
i9000 Semaphore Kernels for GB, ICS or JB (select according...
Click to expand...
Click to collapse
-i downloaded the first file in this page (Semaphore_2.7.4.tar) :
-open Odin, select that kernel for PDA, untick reboot,press start result :
-i pulled the battery out, reinsert and use combo keys for CWM (V+,Home,Power) and nothing happened, the phone turn on and like always stays for ever in the boot screen
I know there is a lot of threats like this but non helped me....
My I9000 have a bootloop and wont enter recovery but download mode works fine... I tryed flashing a lot of roms ( stock, semafor, darky) non wolld help.. Always bootloop and no recovery working, on charger i have bootloop with battery image... Is there something eles i can try before i use a hammer and destroy my SGS ?????
Sorry for bad English.....
djoledtc said:
I know there is a lot of threats like this but non helped me....
My I9000 have a bootloop and wont enter recovery but download mode works fine... I tryed flashing a lot of roms ( stock, semafor, darky) non wolld help.. Always bootloop and no recovery working, on charger i have bootloop with battery image... Is there something eles i can try before i use a hammer and destroy my SGS ?????
Sorry for bad English.....
Click to expand...
Click to collapse
Take a look at My Android Solutions, link below about methods to solve boot loops, if that does not help you can flash a recue kit from My Android collections link below too
No don't use hammer yet, if you are so inclined to do so, feel free to donate it than using the hammer
Check this out! Links to useful Guides and " Banned " Documentaries
djoledtc said:
Is there something eles i can try before i use a hammer and destroy my SGS ?????.....
Click to expand...
Click to collapse
You must be very rich, mate. Hopefully you don't use your hammer every time when your car or furniture has a little problem
Try this unbrick guide:
http://forum.xda-developers.com/showthread.php?t=2444308
I have tried a lot of times flashing stock ROM but no luck... Alweys bootloop , and no recovery......
xsenman said:
Take a look at My Android Solutions, link below about methods to solve boot loops, if that does not help you can flash a recue kit from My Android collections link below too
No don't use hammer yet, if you are so inclined to do so, feel free to donate it than using the hammer
Check this out! Links to useful Guides and " Banned " Documentaries
Click to expand...
Click to collapse
I tried your i9000 Rescue EzBase Rescue and Recovery by nitr8 now it is even worse...... It got me FAIL in ODIN on around 30 %.... Now i cant flash any more any ROM i always get FAIL at some point.... ... Any help ????
Are you using compatible Odin version? Which one did you use?
Did you check my thread?
it got me FAIL in ODIN on around 30 %.... Now i cant flash any more any ROM i always get FAIL at some point
Click to expand...
Click to collapse
Is Samsung Kies installed on your PC? You must kill its process in the Task manager before using Odin.
tetakpatak said:
Are you using compatible Odin version? Which one did you use?
Did you check my thread?
Is Samsung Kies installed on your PC? You must kill its process in the Task manager before using Odin.
Click to expand...
Click to collapse
I checked your thread , but there is a part where i have to download Stock ROM for my baseband width and firmware... I dont know what is my baseband ... On the back of the phone only writes model: GT-I9000 and SSN : I9000GSMH... How can i know what is my stock ROM.. I tried with FROYO but still bootloop and no recovery........ I Kill KIES processe when using Odin...... Odin version is 1.83
djoledtc said:
I checked your thread , but there is a part where i have to download Stock please for my baseband width and firmware... I dont know what is my baseband ... On the back of the phone only writes model: GT-I9000 and SSN : I9000GSMH... How can i know what is my stock ROM.. I tried with FROYO but still bootloop and no recovery........ I Kill KIES processe when using Odin...... Odin version is 1.83
Click to expand...
Click to collapse
It is easy to find out, as the codes in the firmware/baseband code are regarding the regions. You can browse in www which is the proper regional code for your country.
Odin 1.83 is compatible, run is as administrator. The ROMs are out of 3 parts. Try to flash one of them as described (choosing proper files for PDA, CSC, Modem plus Pit 512 file) when all ready, run download mode , connect USB cable and start flashing as soon as Odin recognizes your phone. Don't leave it long in download mode waiting as the i9000 seems to have some kind of standby/sleep after 30sec or bit longer.
Remember what Odin displays in the leftmost fields during the flashing and post here (quote my text please / reply) if something goes wrong. Otherwise that proceeding should revive your phone.
tetakpatak said:
It is easy to find out, as the codes in the firmware/baseband code are regarding the regions. You can browse in www which is the proper regional code for your country.
Odin 1.83 is compatible, run is as administrator. The ROMs are out of 3 parts. Try to flash one of them as described (choosing proper files for PDA, CSC, Modem plus Pit 512 file) when all ready, run download mode , connect USB cable and start flashing as soon as Odin recognizes your phone. Don't leave it long in download mode waiting as the i9000 seems to have some kind of standby/sleep after 30sec or bit longer.
Remember what Odin displays in the leftmost fields during the flashing and post here (quote my text please / reply) if something goes wrong. Otherwise that proceeding should revive your phone.
Click to expand...
Click to collapse
Still nothing.... I also tryed some rescue kits with Heimdall, but nothing.. Flashing goes ok, but stiil bootloop and no recovery...... I go into download by volume down+home+power , and download mode is in english so i think it is the real i9000 international and not that chines/korean version of shw m100s.... On the back of my device say i9000gsmh.... Is there any way that i can enter recovery mode ???? i have no more ideas... i read 100 of treads and non helped me.....
xsenman said:
Take a look at My Android Solutions, link below about methods to solve boot loops, if that does not help you can flash a recue kit from My Android collections link below too
No don't use hammer yet, if you are so inclined to do so, feel free to donate it than using the hammer
Check this out! Links to useful Guides and " Banned " Documentaries
Click to expand...
Click to collapse
xsenman -- I have same problem like in this treadh http://forum.xda-developers.com/showthread.php?t=2454763
I it posible your sugestion that internal SD card is dead so i always have bootloop and no recovery mode??? Can your post http://forum.xda-developers.com/showpost.php?p=31017954&postcount=5335 help me??? How large SD card do i need ??? 2Gb, 4Gb, 8gb, 16gb?????
It is really strange. Did you ever use ADB?
Try to get connection via ADB and make a logcat to see what the error is.
There are many threads about ADB / SDK
djoledtc said:
xsenman -- I have same problem like in this treadh http://forum.xda-developers.com/showthread.php?t=2454763
I it posible your sugestion that internal SD card is dead so i always have bootloop and no recovery mode??? Can your post http://forum.xda-developers.com/showpost.php?p=31017954&postcount=5335 help me??? How large SD card do i need ??? 2Gb, 4Gb, 8gb, 16gb?????
Click to expand...
Click to collapse
sorry about the delayed response. Actually it looks like your problem is identical to this thread so can you tell me did you use CM updater or did this problem crop up because you down grade from one CM version to another?
In any case lets try and fix the boot loader , flash the JVU bootloader , phone bootloader update ticked with the PIT file (repartition ticked) and see if it boots .
or at least you should be able to get into recovery mode with combo keys after this. IF it did not boot you can flash the JVU ROM again
I doubt this is due to corrupt internal SD card, but maybe its the final option to try in-order to get your phone booting
Check this out! Links to useful Guides and " Banned " Documentaries
tetakpatak said:
It is really strange. Did you ever use ADB?
Try to get connection via ADB and make a logcat to see what the error is.
There are many threads about ADB / SDK
Click to expand...
Click to collapse
I am downloading SDK and i will report.....
xsenman said:
sorry about the delayed response. Actually it looks like your problem is identical to this thread so can you tell me did you use CM updater or did this problem crop up because you down grade from one CM version to another?
In any case lets try and fix the boot loader , flash the JVU bootloader , phone bootloader update ticked with the PIT file (repartition ticked) and see if it boots .
or at least you should be able to get into recovery mode with combo keys after this. IF it did not boot you can flash the JVU ROM again
I doubt this is due to corrupt internal SD card, but maybe its the final option to try in-order to get your phone booting
Check this out! Links to useful Guides and " Banned " Documentaries
Click to expand...
Click to collapse
I dont know... My friend was updateing kernel and he said he mixed up some ROM and then was this situation = bootloop and recovery.....
I treid your i9000_xwjvu.tar and after Odin flash PASS phone turn off it self and no booting any more and no download mode... Pull baterry for 20sec and noh have only download again...... I will read more of your threads..... If i in the and try to put external SD how large should minimum be??? 2Gb, 4Gb ????
tetakpatak said:
It is really strange. Did you ever use ADB?
Try to get connection via ADB and make a logcat to see what the error is.
There are many threads about ADB / SDK
Click to expand...
Click to collapse
I tried with sdk but computer dont recognise my device.... on adb devices i get nothing.....
Today i got same problem, phone with Cyanogenmod in bootloop, on charger same bootloop. Solved with flashing stock ROM with Odin.
Maybe stupid question, but noone asked it, is your battery charged? Because in bootloop it does not charge the battery. And for flashing you need more then minimum. If you have multimeter measure voltage on battery, if it is 3,7V and less, flasshing will not be done, you need about 3,9V.
ARSiq said:
Today i got same problem, phone with Cyanogenmod in bootloop, on charger same bootloop. Solved with flashing stock ROM with Odin.
Maybe stupid question, but noone asked it, is your battery charged? Because in bootloop it does not charge the battery. And for flashing you need more then minimum. If you have multimeter measure voltage on battery, if it is 3,7V and less, flasshing will not be done, you need about 3,9V.
Click to expand...
Click to collapse
Battery is charged.. I have extrenal charger so I am charging the battery when i read posts .... What ROM did you flash?? link me.....
Did you update in SDK manager sources for your Android version? Check my thread here:
http://forum.xda-developers.com/showthread.php?t=2444308
You will find on the bottom of the OP attached screenshot with red mark where you have to check and download updates.
ADB drivers for Android versions 4.0+ could be not pre-installed and you have to do it manually. So for CM10.x ROMs you shouldn't use ADB (SDK manager) versions older than 1.0.31.
djoledtc said:
I tried with sdk but computer dont recognise my device.... on adb devices i get nothing.....
Click to expand...
Click to collapse
djoledtc said:
I dont know... My friend was updateing kernel and he said he mixed up some ROM and then was this situation = bootloop and recovery.....
I treid your i9000_xwjvu.tar and after Odin flash PASS phone turn off it self and no booting any more and no download mode... Pull baterry for 20sec and noh have only download again...... I will read more of your threads..... If i in the and try to put external SD how large should minimum be??? 2Gb, 4Gb ????
Click to expand...
Click to collapse
ok, can you try flashing them all at one go, as mentioned below ( remove SIM CARD as well as EXT SD Card)
1) Select PIT > 512 PIT (If 'Re-Partition' is not checked under 'Option', check it)
2) Select Bootloader > i9000_xwjvu.tar ( do not tick update phone boot loader)
3. Select PDA > CODE_I9000XXJVU_CL851880_REV03_user_low_ship.tar.m d5
4. Select PHONE > MODEM_I9000XXJVU_REV_00_CL1092175.tar.md5
5. Select CSC > GT-I9000-CSC-MULTI-OXAJVU.tar.md5
EDIT: IF still not booting, flash the CWM semaphore kernel, see if get into CWM recovery
as for using external SD card 8GB or 16 GB will be better, you need a 2GB primary partition (acts as phone memory) and the rest of it as a second partition. (acts as internal SD card)
Check this out! Links to useful Guides and " Banned " Documentaries
xsenman said:
ok, can you try flashing them all at one go, as mentioned below ( remove SIM CARD as well as EXT SD Card)
1) Select PIT > 512 PIT (If 'Re-Partition' is not checked under 'Option', check it)
2) Select Bootloader > i9000_xwjvu.tar ( do not tick update phone boot loader)
3. Select PDA > CODE_I9000XXJVU_CL851880_REV03_user_low_ship.tar.m d5
4. Select PHONE > MODEM_I9000XXJVU_REV_00_CL1092175.tar.md5
5. Select CSC > GT-I9000-CSC-MULTI-OXAJVU.tar.md5
EDIT: IF still not booting, flash the CWM semaphore kernel, see if get into CWM recovery
as for using external SD card 8GB or 16 GB will be better, you need a 2GB primary partition (acts as phone memory) and the rest of it as a second partition. (acts as internal SD card)
Check this out! Links to useful Guides and " Banned " Documentaries
Click to expand...
Click to collapse
Tried all at one go and didnot help... Still have bootloop and no recovery. i tried semaphore kernels and same results. When i flashed darky karnel then Samsung logo hade some green darky text writen on the bottom of the screen but still the samo problem..... .. I lost all ideas.... If i find some large SD card i will try some solutions with changing internal memory with exSD.....
Hello everybody,
Ok, here's the deal, my samsung galaxy s plus (I9001) is in a continuous bootloop of the samsung logo, doesnt charge, no recovery mode, and the only thing i can use is download mode.
So i've tried flashing inumerous ROMS (stock and custom ones) and nothing works, i've also tried to replace the boot loader but still nothing. I've also tried to see if the problem had anything to do with the eMMC, and once again i failed. Oh, and i also tried to unbrick it using this method: http://forum.xda-developers.com/showthread.php?t=2216996&highlight=userdata+img+ext4
I can't really deal with this by myself cause i've tried everything i could and still got no progress whatsoever.
SOMEONE HELP ME THIS PHONE IS DRIVING ME INSANE!
Thanks in advance.
KaJ116 said:
SOMEONE HELP ME THIS PHONE IS DRIVING ME INSANE!
Click to expand...
Click to collapse
Download a i9001 ver 6 CWM from [Toolkit][A.I.O Rescue & Recovery] My Android Collection, flash it using Odin with areiesVe.ops ( untick auto reboot in Odin) . After remove battery and insert, reboot in CWM, and format every partition ( also do not reboot) power off, remove battery, insert , enter download mode and flash a i9001 stock ROM & boot loader (tick, update bootloader) with ariesVe.ops
Check this out! Links to useful Guides and " Banned " Documentaries
xsenman said:
Download a i9001 ver 6 CWM from [Toolkit][A.I.O Rescue & Recovery] My Android Collection, flash it using Odin with areiesVe.ops ( untick auto reboot in Odin) . After remove battery and insert, reboot in CWM, and format every partition ( also do not reboot) power off, remove battery, insert , enter download mode and flash a i9001 stock ROM & boot loader (tick, update bootloader) with ariesVe.ops
Check this out! Links to useful Guides and " Banned " Documentaries
Click to expand...
Click to collapse
Thanks for your response! I'm going to try it, i'll post the results later. THANK YOU! :angel:
[UPDATE]
I've flashed the CWM like you said but the phone still doesnt boot into recovery. I couldnt find the odin version on the link you wrote so i used this one:
"cwm 6037:
http://rapidgator.net/file/6ccfef8e2...31dfeec6711b72"
dont know if it changes anything, i'm just saying so you understand the procedure fully.
Ok, so I tried a couple more times and the phone still doesnt go into recovery. All i see is "Samsung... Samsung... Samsung" and it's tripping me out.
Please help me out, it's been really frustrating cause I've tried EVERYTHING and still no progress has been made.
KaJ116 said:
Ok, so I tried a couple more times and the phone still doesnt go into recovery. All i see is "Samsung... Samsung... Samsung" and it's tripping me out.
Please help me out, it's been really frustrating cause I've tried EVERYTHING and still no progress has been made.
Click to expand...
Click to collapse
here you go
i9001 CMW 5.5
i9001 CWM 6.0 for amss.mbn download.. problems on Odin 4.43
i9001 Touch CWM 6.0
i9001 TWRP 2.3.1.1 Recovery
i9001 RZrecovery Not CWM
or Reboot tool using PC
you can try any of the above to enter recovery mode
I hope you are using the correct key press on your phone for recovery mode, or if its possible the keys are broken? try the reboot tool to acess it than .
Check this out! Links to useful Guides and " Banned " Documentaries
xsenman said:
here you go
i9001 CMW 5.5
i9001 CWM 6.0 for amss.mbn download.. problems on Odin 4.43
i9001 Touch CWM 6.0
i9001 TWRP 2.3.1.1 Recovery
i9001 RZrecovery Not CWM
or Reboot tool using PC
you can try any of the above to enter recovery mode
I hope you are using the correct key press on your phone for recovery mode, or if its possible the keys are broken? try the reboot tool to acess it than .
Check this out! Links to useful Guides and " Banned " Documentaries
Click to expand...
Click to collapse
I know i've been using the correct keys, i've confirmed before, started doubting about that a while ago but everything is alright and the keys are not broken :s
Also, i cant use the repair tool cause the phone doesnt even turn on. It doesnt do anything besides the samsung logo and download mode. Nothing.
I've tried those and still nothing.
Any other solutions? I'm so sorry for being a pain, but the phone isnt helping, i already thought of throwing it against a wall but it wouldn't do much good. Thanks in advance, once again.
KaJ116 said:
I know i've been using the correct keys, i've confirmed before, started doubting about that a while ago but everything is alright and the keys are not broken :s
Also, i cant use the repair tool cause the phone doesnt even turn on. It doesnt do anything besides the samsung logo and download mode. Nothing.
I've tried those and still nothing.
Any other solutions? I'm so sorry for being a pain, but the phone isnt helping, i already thought of throwing it against a wall but it wouldn't do much good. Thanks in advance, once again.
Click to expand...
Click to collapse
The reboot tool, will do the job from your PC, as long as you can enter download mode and connect to odin, it should be possible, did you try it?
all other solutions are in [Tutorial][A.I.O. Rescue & Recovery] My Android Solutions. [Help & Troubleshooting
Check this out! Links to useful Guides and " Banned " Documentaries
xsenman said:
The reboot tool, will do the job from your PC, as long as you can enter download mode and connect to odin, it should be possible, did you try it?
all other solutions are in [Tutorial][A.I.O. Rescue & Recovery] My Android Solutions. [Help & Troubleshooting
Check this out! Links to useful Guides and " Banned " Documentaries
Click to expand...
Click to collapse
I tried using the reboot tool via download mode and nothing worked. Tried to reflash again the clockwork recovery, saw all your solutions from your thread and nothing turns my phone on !
Also tried this http://forum.xda-developers.com/showthread.php?t=1932327 but no luck(live everyting!)
KaJ116 said:
I tried using the reboot tool via download mode and nothing worked. Tried to reflash again the clockwork recovery, saw all your solutions from your thread and nothing turns my phone on !
Also tried this http://forum.xda-developers.com/showthread.php?t=1932327 but no luck(live everyting!)
Click to expand...
Click to collapse
Than the only other option, is to use a Riff box, meaning you need to take it to a mobile technician to try and flash the board internally., since nothing works. sorry, it could be due to hardware failure, since software solutions are not working for you.
Check this out! Links to useful Guides and " Banned " Documentaries
xsenman said:
Than the only other option, is to use a Riff box, meaning you need to take it to a mobile technician to try and flash the board internally., since nothing works. sorry, it could be due to hardware failure, since software solutions are not working for you.
Check this out! Links to useful Guides and " Banned " Documentaries
Click to expand...
Click to collapse
Thanks men, i think i m going to buy a xiaomi mi3 phone. This one is dead, RIP hihi
Thanks A LOT for your help
hi,i have i9000 in my hand with a problem of not stay in download mode and go to recovery after put in download mode just after 5 seconds,
history is someone flashed it with anycall rom and afterthat it stuck at logo everytime and when i wipe it cache and factory then it is power up normally but just for one time,
now i cant flashed it bcoz it cant stay in download mode and immediately go to recovery,
in recovery also shows the
E:internal mmc pen fail
E:lfs pass open fail
how to fix it and back to original i9000 stock rom?
waiting and searching for this issue long time and find this link below for korean galaxy s,
http://forum.xda-developers.com/showthread.php?t=2573023
with the given details i do the first step and it fail at end on half way loading bar on downloading mode,
now device is restarting at samsung anycall logo randomly,
can some one help me to fix this issue?
zeeshantayyab said:
can some one help me to fix this issue?
Click to expand...
Click to collapse
Do it again after battery pull and fresh Odin after reboot PC. If it get stuck after stage one, skip 2 & 3, proceed to stage 4.
Check this out! Links to useful Guides and " Banned " Documentaries
xsenman said:
Do it again after battery pull and fresh Odin after reboot PC. If it get stuck after stage one, skip 2 & 3, proceed to stage 4.
Check this out! Links to useful Guides and " Banned " Documentaries
Click to expand...
Click to collapse
mobile is power up now in working condition except memory(internal),its corrupted,
any idea to fix it?
zeeshantayyab said:
mobile is power up now in working condition except memory(internal),its corrupted,
any idea to fix it?
Click to expand...
Click to collapse
Look in My Directory (yellow Pages) in SD cards section about it.
Check this out! Links to useful Guides and " Banned " Documentaries