Database Develop

[Q] Soft or Hard? Bricked HTC One

Okay - Don't want to say NOOB mistake but, failure to follow direction - YES. In any case I NEED HELP!!! Like everyone else, sold my phone and attempted to put it back to stock.
Changes made - Changed to Google Edition from AT&T.
- Rooted Phone - S-OFF - Changed CID to GOOGL001 - flashed GE RUU.zip -- Enough said
Changes made to go back to stock
- Changed CID back to CWS__001 -- Turned S-On ** First mistake -- Locked bootloader -- attempted to flash ATTRUU
- Went to flash cyanogenmod just to have a rom and accidentally FORMATTED in TWRP -- 2nd mistake
I have also tried every RUU that might have an inkling of success but all i get is the 12 signature verify fail
I have tried everything twice. But with out S-OFF i think i'm dead in the water.
I tried - flashing hboot1.44 (modifing android-info) and get error
c:\androidsdk\sdk\platform-tools>fastboot flash zip hboot144.zip
target reported max download size of 1526722560 bytes
sending 'zip' (508 KB)...
OKAY [ 0.230s]
writing 'zip'...
(bootloader) signature checking...
FAILED (remote: 12 signature verify fail)
finished. total time: 0.279s
** I have tried RUU.exe's but nothing will go because of the CID/HBOOT mismatch
Here is what I have
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.54.0000
(bootloader) version-baseband: 4A.18.3263.15
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.06.1700.10
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: HT35GW903487
(bootloader) imei: 354439055133427
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: CWS__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4305mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: RUU
(bootloader) commitno-bootloader: dirty-94cf81a8fd
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 6.940s
** If i could just flash an hboot - I could get an RUU working but again I need S-OFF.
- Also when I try to flash cyanogenmod from recovery, it says Unable to mount system, data, can't mount **** and I assume because recovery reformatted them and the correct file systems are not in place.
FML!!! PLEASE HELP

Read Vomers great post, and follow the instructions very carefully
http://forum.xda-developers.com/showthread.php?t=2365506&page=4

Also remove your imei number from your post
Sent from my HTC One using xda app-developers app

[Q] How to flash ruu HTC one m7 ul?

How can I flash a ruu? I tryed this RUU_M7_UL_K44_SENSE55_MR_HTC_Europe_4.19.401.9_R_Radio_4A.23.3263.28_10.38r.1157.04L_release_353069_signed_2-1 but the setup loop at 5% verifying something. I relocked the bootloader and change cid to htc__001 and I update the firmware to 5.11.401.10
C:\Users\xxx>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.57.0000
(bootloader) version-baseband: 4T.27.3218.14
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: xxx
(bootloader) imei: xxx
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 3892mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-e47fb74b
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.067s

Klinda said:
How can I flash a ruu? I tryed this RUU_M7_UL_K44_SENSE55_MR_HTC_Europe_4.19.401.9_R_Radio_4A.23.3263.28_10.38r.1157.04L_release_353069_signed_2-1 but the setup loop at 5% verifying something. I relocked the bootloader and change cid to htc__001 and I update the firmware to 5.11.401.10
C:\Users\xxx>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.57.0000
(bootloader) version-baseband: 4T.27.3218.14
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: xxx
(bootloader) imei: xxx
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 3892mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-e47fb74b
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.067s
Click to expand...
Click to collapse
your s-off so no need to relock bootloader
you need to downgrade your hboot
see @nkk71 superguide for returning to stock on how to downgrade hboot and RUU > http://forum.xda-developers.com/showthread.php?t=2541082

clsA said:
your s-off so no need to relock bootloader
you need to downgrade your hboot
see @nkk71 superguide for returning to stock on how to downgrade hboot and RUU > http://forum.xda-developers.com/showthread.php?t=2541082
Click to expand...
Click to collapse
I have to only fix my partitions and restore imei and baseband,I don't want to return stock. So why I have to flash hboot 1.44? it's old I think.. I followed this guide in order to downgrade hboot http://forum.xda-developers.com/showthread.php?t=2365506 .. Are you sure I have to downgrade with this old hboot? maybe can be other problems because is too old? so when i will flash hboot 1.44 I will try to flash the ruu I say to you?

Klinda said:
I have to only fix my partitions and restore imei and baseband,I don't want to return stock. So why I have to flash hboot 1.44? it's old I think.. I followed this guide in order to downgrade hboot http://forum.xda-developers.com/showthread.php?t=2365506 .. Are you sure I have to downgrade with this old hboot? maybe can be other problems because is too old? so when i will flash hboot 1.44 I will try to flash the ruu I say to you?
Click to expand...
Click to collapse
yes the old hboot will help with ruu flashing errors
it can create problems if your on windows 8.1

clsA said:
yes the old hboot will help with ruu flashing errors
it can create problems if your on windows 8.1
Click to expand...
Click to collapse
I have windows 7 32 bit.. so I have to change to super cid in order to flash the hboot(i remove tampared also),then change cid to htc__001 and I don't need to relock bootloader in order to flash the ruu?

Klinda said:
I have windows 7 32 bit.. so I have to change to super cid in order to flash the hboot(i remove tampared also),then change cid to htc__001 and I don't need to relock bootloader in order to flash the ruu?
Click to expand...
Click to collapse
not if you have s-off

clsA said:
not if you have s-off
Click to expand...
Click to collapse
I have problem with fastboot commands with windows 7... I can do only one command now.
C:\Users\Lorenzo\Desktop>fastboot getvar all
getvar:all FAILED (command write failed (No such file or directory))
finished. total time: -0.000s
C:\Users\Lorenzo\Desktop>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.44.0000
(bootloader) version-baseband: 4T.27.3218.14
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: xxx
(bootloader) imei: xxxx
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 4296mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
getvar:all FAILED (status read failed (Too many links))
finished. total time: 0.065s
C:\Users\Lorenzo\Desktop>fastboot getvar all
^C
C:\Users\Lorenzo\Desktop>fastboot devices
xxx fastboot
C:\Users\Lorenzo\Desktop>fastboot getvar all
getvar:all FAILED (command write failed (Unknown error))
finished. total time: 0.580s
C:\Users\Lorenzo\Desktop>fastboot getvar all
getvar:all FAILED (command write failed (Unknown error))
finished. total time: 0.580s
C:\Users\Lorenzo\Desktop>fastboot devices
xxxx fastboot
C:\Users\Lorenzo\Desktop>fastboot getvar all
^C
C:\Users\Lorenzo\Desktop>fastboot devices
xxx fastboot
C:\Users\Lorenzo\Desktop>fastboot getvar all
getvar:all FAILED (command write failed (Unknown error))
finished. total time: 0.580s
C:\Users\Lorenzo\Desktop>
So i can't flash the ruu and I think when I do the one command the phone 'freeze' and sometimes if i press power button it leave the fastboot usb or i need to restart the phone.

[email protected]:~$ sudo fastboot devices
[sudo] password for klinda:
xxxx fastboot
[email protected]:~$ sudo fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.44.0000
(bootloader) version-baseband: 4T.27.3218.14
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: xxx
(bootloader) imei: xxx
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 4264mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
getvar:all FAILED (status read failed (Value too large for defined data type))
finished. total time: 5.064s
[email protected]:~$ sudo fastboot getvar all
getvar:all FAILED (status malformed (0 bytes))
finished. total time: 1.001s
[email protected]:~$ sudo fastboot getvar all
(bootloader) version-bootloader: 1.44.0000
(bootloader) version-cpld: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) imei: xxx
(bootloader) product: m7_ul
(bootloader) modelid: PN0710000
(bootloader) battery-status: good
(bootloader) battery-voltage: 4271mV
(bootloader) security: off
(bootloader) boot-mode: FASTBOOT
getvar:all FAILED (status malformed (0 bytes))
finished. total time: 43.338s
[email protected]:~$ sudo fastboot getvar all
all: Done!eckpt: 0
finished. total time: 0.000s
[email protected]:~$ sudo fastboot getvar all
^C
^C^C^C^[email protected]:~$
Also in linux :/ What can i do? I think I 'bricked' my phone by downgrade hboot(the phone boots without problems but with imei and baseband uknow and it reboots.(I have to fix this with ruu))

Klinda said:
[email protected]:~$ sudo fastboot devices
[sudo] password for klinda:
xxxx fastboot
[email protected]:~$ sudo fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.44.0000
(bootloader) version-baseband: 4T.27.3218.14
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: xxx
(bootloader) imei: xxx
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 4264mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
getvar:all FAILED (status read failed (Value too large for defined data type))
finished. total time: 5.064s
[email protected]:~$ sudo fastboot getvar all
getvar:all FAILED (status malformed (0 bytes))
finished. total time: 1.001s
[email protected]:~$ sudo fastboot getvar all
(bootloader) version-bootloader: 1.44.0000
(bootloader) version-cpld: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) imei: xxx
(bootloader) product: m7_ul
(bootloader) modelid: PN0710000
(bootloader) battery-status: good
(bootloader) battery-voltage: 4271mV
(bootloader) security: off
(bootloader) boot-mode: FASTBOOT
getvar:all FAILED (status malformed (0 bytes))
finished. total time: 43.338s
[email protected]:~$ sudo fastboot getvar all
all: Done!eckpt: 0
finished. total time: 0.000s
[email protected]:~$ sudo fastboot getvar all
^C
^C^C^C^[email protected]:~$
Also in linux :/ What can i do? I think I 'bricked' my phone by downgrade hboot(the phone boots without problems but with imei and baseband uknow and it reboots.(I have to fix this with ruu))
Click to expand...
Click to collapse
your phone is fine run the RUU

clsA said:
your phone is fine run the RUU
Click to expand...
Click to collapse
I have to change cid? but I think no because if I do the commands of change cid... not have response.. there isn't also the write 'waiting of device' nothing...

Klinda said:
I have to change cid?
Click to expand...
Click to collapse
your super CID no need to change

clsA said:
your super CID no need to change
Click to expand...
Click to collapse
Watch the edited message..

Klinda said:
Watch the edited message..
Click to expand...
Click to collapse
Turn off the phone
hold power and volume down for 20 seconds when it shuts off in the bootloader let go of the buttons.
power the phone back on holding volume down to get to fastboot
plug the phone in to the windows 7 pc and get fastboot usb.
run this RUU >> http://www.androidruu.com/getdownlo...10.38r.1157.04L_release_353069_signed_2-1.exe

clsA said:
Turn off the phone
hold power and volume down for 20 seconds when it shuts off in the bootloader let go of the buttons.
power the phone back on holding volume down to get to fastboot
plug the phone in to the windows 7 pc and get fastboot usb.
run this RUU >> http://www.androidruu.com/getdownlo...10.38r.1157.04L_release_353069_signed_2-1.exe
Click to expand...
Click to collapse
ERROR [158]: Image error
What can i do?

Klinda said:
ERROR [158]: Image error
What can i do?
Click to expand...
Click to collapse
did you md5 check the file you downloaded to see if it's complete ?
you can also try this one
http://www.htc1guru.com/dld/ruu-zip...0-01_release_318486_signed_2_4_decrypted-zip/
it flashes in fastboot RUU mode
fastboot oem rebootRUU
fastboot flash zip rom.zip
fastboot flash zip rom.zip
fastboot reboot-bootloader

clsA said:
did you md5 check the file you downloaded to see if it's complete ?
you can also try this one
http://www.htc1guru.com/dld/ruu-zip...0-01_release_318486_signed_2_4_decrypted-zip/
it flashes in fastboot RUU mode
fastboot oem rebootRUU
fastboot flash zip rom.zip
fastboot flash zip rom.zip
fastboot reboot-bootloader
Click to expand...
Click to collapse
Yes I check it,now I am dowloading the zip file and I try it.. and wait I need to fix my partitons.. with this old ruu partitions get fixed?

clsA said:
did you md5 check the file you downloaded to see if it's complete ?
you can also try this one
http://www.htc1guru.com/dld/ruu-zip...0-01_release_318486_signed_2_4_decrypted-zip/
it flashes in fastboot RUU mode
fastboot oem rebootRUU
fastboot flash zip rom.zip
fastboot flash zip rom.zip
fastboot reboot-bootloader
Click to expand...
Click to collapse
C:\Users\Lorenzo\Desktop>fastboot flash zip rom.zip
sending 'zip' (1010240 KB)...
FAILED (data transfer failure (Too many links))
finished. total time: 0.020s
I think with hboot 1.44 fastboot commands bricked. Sorry for answer too late but I was on holiday. There is another way to fix imei and baseband? Sometimes it recgonize imei etc but after 7 8 hours the phone reboots and show the same message.

Up
Someone can help me? or I have to buy a new smartphone? :/

Klinda said:
Up
Someone can help me? or I have to buy a new smartphone? :/
Click to expand...
Click to collapse
is the bootloader locked or unlocked

clsA said:
is the bootloader locked or unlocked
Click to expand...
Click to collapse
Unlocked

Need stock RUU

Can someone help me out?
I'm trying to either A.) return to stock then upgrade OTA to the latest firmware or B.) Flash said firmware from fastboot. However the RUU (Sprint_HTC_One_M8_3.30.654.2_RUU.zip) I tried from here failed the signature check and now my device will only boot into the bootloader.
Heres my device info.
Code:
~/Documents/Android/sdk/platform-tools » fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.18.0.0000
(bootloader) version-baseband: 1.08.20.0612_4
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 2.16.654.4
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: HT45LSF00310
(bootloader) imei: 990004994158875
(bootloader) imei2: Not Support
(bootloader) meid: 99000499415887
(bootloader) product: m8_whl
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B70000
(bootloader) cidnum: SPCS_004
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: RUU
(bootloader) commitno-bootloader: d4c3cae5
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.015s
And here is the failure message I get when I try to flash from fastboot.
Code:
fastboot flash zip ~/Desktop/android/3.30.654.2_firmware.zip
target reported max download size of 1830612992 bytes
sending 'zip' (51951 KB)...
OKAY [ 2.445s]
writing 'zip'...
(bootloader) signature checking...
FAILED (remote: 12 signature verify fail)
finished. total time: 5.154s
Atm my phone is bricked :/

All RUU's can be found in the thread linked below, along with installation instructions:
http://forum.xda-developers.com/showthread.php?t=2729173

Magnum_Enforcer said:
All RUU's can be found in the thread linked below, along with installation instructions:
http://forum.xda-developers.com/showthread.php?t=2729173
Click to expand...
Click to collapse
I have tried that via fastboot. Is there something I have to do other than 'fastboot oem rebootRUU && flash zip firmware.zip' from the RUU?

Did you relock your bootloader?

Magnum_Enforcer said:
Did you relock your bootloader?
Click to expand...
Click to collapse
Yeah I figured it out. For some reason I could only use the windows RUU utility. All is well now, thanks!

akasoldats said:
Yeah I figured it out. For some reason I could only use the windows RUU utility. All is well now, thanks!
Click to expand...
Click to collapse
Glad to help:thumbup:

[Q] [BITCOIN REWARD FOR SOLUTION] I'm totally stuck, Which RUU do i use??

Here is my device's history:
Stock (regular HTC1 no dev edition)
Unlocked Bootloader
Rooted
S-OFF
Installed Android revolution
Tried to convert to developer edition (for lollipop early upgrade)
Modified to SuperCID
Now I can use any RUU for the life of me, I've tried about 10 of them, but nothing seems to support it and i always end up with a ERROR 158
I'm kind of new to this even though ive screwed around with my phone a bunch. Can you just help me to get to a stock version of lollipop? THANKS SO MUCH IN ADVANCE
G:\Android>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.44.0000
(bootloader) version-baseband: 4A.14.3250.13
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.29.631.17
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 4298mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: RUU
getvar:all FAILED (status read failed (Too many links))
finished. total time: 0.065s
ill hook up 0.02 BTC for the person who gives me the right answer!

kwarren said:
Here is my device's history:
Stock (regular HTC1 no dev edition)
Unlocked Bootloader
Rooted
S-OFF
Installed Android revolution
Tried to convert to developer edition (for lollipop early upgrade)
Modified to SuperCID
Now I can use any RUU for the life of me, I've tried about 10 of them, but nothing seems to support it and i always end up with a ERROR 158
I'm kind of new to this even though ive screwed around with my phone a bunch. Can you just help me to get to a stock version of lollipop? THANKS SO MUCH IN ADVANCE
G:\Android>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.44.0000
(bootloader) version-baseband: 4A.14.3250.13
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.29.631.17
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: rEMOVE mE
(bootloader) imei: remove me
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 4298mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: RUU
getvar:all FAILED (status read failed (Too many links))
finished. total time: 0.065s
Click to expand...
Click to collapse
First, remove your imei and serial number from above, you don't want to post that info.
As your phone is s-off you can use any RUU you like, just change your cid and mid to match the RUU you want to use first, also you may need to flash the corresponding firmware for that RUU first for it to work.
EDIT: Follow this guide to convert to dev edition http://forum.xda-developers.com/htc-one/general/guide-convert-m7-developer-edition-t2840311

Seanie280672 said:
First, remove your imei and serial number from above, you don't want to post that info.
As your phone is s-off you can use any RUU you like, just change your cid and mid to match the RUU you want to use first, also you may need to flash the corresponding firmware for that RUU first for it to work.
EDIT: Follow this guide to convert to dev edition http://forum.xda-developers.com/htc-one/general/guide-convert-m7-developer-edition-t2840311
Click to expand...
Click to collapse
Thanks for the reply.
OK so i just made sure my MID was the developer edition on, and my new MID and CID are as follows:
Code:
G:\Android>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.44.0000
(bootloader) version-baseband: 4A.14.3250.13
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.29.631.17
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno:
(bootloader) imei:
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: BS_US001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4313mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
getvar:all FAILED (status read failed (Too many links))
finished. total time: 0.070s
Then i try to flash it with the latest android 5.02 stock rom developer edition from thier site
One M7
Brightstar US
WWE
MR
3.4.10
v5.0.2 558 MB
7.17.1540.7 Developer Edition
and this is the result:
Code:
G:\Android>adb reboot-bootloader
adb server is out of date. killing...
* daemon started successfully *
G:\Android>fastboot oem rebootRUU
...
(bootloader) Start Verify: 0
OKAY [ 0.047s]
finished. total time: 0.047s
G:\Android>fastboot flash zip G:\Android\m7ul-3.4.10-g3c9a631.zip
sending 'zip' (571534 KB)...
OKAY [ 25.960s]
writing 'zip'...
(bootloader) zip header checking...
(bootloader) zip info parsing...
FAILED (remote: 24 parsing android-info fail)
finished. total time: 26.225s
G:\Android>
It says android-info fails, but my CID and MID are correct? AHHHH!!!

Just tried updating to lastest TWRP 2.8.6.0 and trying to install the ZIP that i downloaded from HTC above, fails right away.
Error flashing zip '/sdcard/m7ul-3.4.10-g3ca631.zip'

Fixed it myself! Updated my firmware on my phone to something newer (Firmware 7.19.401.2) and was able to flash a stock rom. Also had to make sure i was SUPERCID.
I have no idea if this information is correct or not

First off, offering a reward will not only get you banned but get you ignored.
Now glad you figured it ouy

M7 only boots into bootloader

Was trying to put my HTC One M7 back to stock to give to my mother-inlaw. I was planning on running an RUU on it, so I relocked the bootloader and ever since I can't seem to do anything with it. It will only boot into the bootloader. I can't seem to unlock it using htc dev now either. any ideas? Any help is appreciated.
This is some info.
C:\adb>fastboot getvar -all
(bootloader) version-bootloader: 1.54.0000
(bootloader) version-baseband: 4T.21.3218.21
(bootloader) version-microp: None
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) imei:
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 4301mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-0e82187e
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
-all: Done!
finished. total time: 16.711s

When I try to unlock it, this is what I see in my CMD prompt.
C:\adb>fastboot flash unlocktoken Unlock_code.bin
sending 'unlocktoken' (0 KB)...
OKAY [ 0.142s]
writing 'unlocktoken'...
(bootloader) unlock token check successfully
OKAY [ 0.004s]
finished. total time: 0.147s
But nothing ever comes up on my phone like it shows in the instructions.

HuMpS 97 DoHc said:
When I try to unlock it, this is what I see in my CMD prompt.
C:\adb>fastboot flash unlocktoken Unlock_code.bin
sending 'unlocktoken' (0 KB)...
OKAY [ 0.142s]
writing 'unlocktoken'...
(bootloader) unlock token check successfully
OKAY [ 0.004s]
finished. total time: 0.147s
But nothing ever comes up on my phone like it shows in the instructions.
Click to expand...
Click to collapse
what is your original cid number, because 11111111 wont be the original, you cant unlock the bootloader as you locked it with a custom recovery on there, and now the only way to get stock recovery on there or flash an RUU is to know your original cid or version main.

Seanie280672 said:
what is your original cid number, because 11111111 wont be the original, you cant unlock the bootloader as you locked it with a custom recovery on there, and now the only way to get stock recovery on there or flash an RUU is to know your original cid or version main.
Click to expand...
Click to collapse
BM___001 would be my cid.

I've changed my CID back to stock. Now what did I need to do? I can't seem to find an RUU for Bell mobility anywhere.
C:\adb>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.54.0000
(bootloader) version-baseband: 4T.21.3218.21
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: HT346W903917
(bootloader) imei:
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: BM___001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4188mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-0e82187e
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.051s

When I try to apply a Bell RUU from this thread http://forum.xda-developers.com/htc-one/general/lollipop-ruu-zip-small-collection-t3053944 This is the error message I get. Any ideas or help???
C:\adb>htc_fastboot reboot-bootloader
rebooting into bootloader... OKAY
Execution time is 40(ms)
C:\adb>htc_fastboot oem rebootRUU
... (bootloader) Start Verify: 3
OKAY
Execution time is 44(ms)
C:\adb>htc_fastboot flash zip RUU.zip
error: preprocess_file : Cannot open file RUU.zip
C:\adb>htc_fastboot flash zip RUU.zip
sending 'zip'... (43286 KB) OKAY
sending time = 2.972 secs
writing 'zip'... (bootloader) adopting the signature contained in this image...
(bootloader) signature checking...
(bootloader) rom parsing start ...
(bootloader) rom parsing finish ...
(bootloader) zip header checking...
(bootloader) zip info parsing...
FAILED (status read failed (Too many links))
Execution time is 9(s)
C:\adb>htc_fastboot reboot-bootloader
rebooting into bootloader... FAILED (status read failed (Unknown error))
Execution time is 5(s)

HuMpS 97 DoHc said:
When I try to apply a Bell RUU from this thread http://forum.xda-developers.com/htc-one/general/lollipop-ruu-zip-small-collection-t3053944 This is the error message I get. Any ideas or help???
C:\adb>htc_fastboot reboot-bootloader
rebooting into bootloader... OKAY
Execution time is 40(ms)
C:\adb>htc_fastboot oem rebootRUU
... (bootloader) Start Verify: 3
OKAY
Execution time is 44(ms)
C:\adb>htc_fastboot flash zip RUU.zip
error: preprocess_file : Cannot open file RUU.zip
C:\adb>htc_fastboot flash zip RUU.zip
sending 'zip'... (43286 KB) OKAY
sending time = 2.972 secs
writing 'zip'... (bootloader) adopting the signature contained in this image...
(bootloader) signature checking...
(bootloader) rom parsing start ...
(bootloader) rom parsing finish ...
(bootloader) zip header checking...
(bootloader) zip info parsing...
FAILED (status read failed (Too many links))
Execution time is 9(s)
C:\adb>htc_fastboot reboot-bootloader
rebooting into bootloader... FAILED (status read failed (Unknown error))
Execution time is 5(s)
Click to expand...
Click to collapse
Remove your IMEI number from your above posts! Never post your IMEI.
How did you managed to change your CID with the phone being S-ON ?!!
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) modelid: PN0712000
(bootloader) cidnum: 11111111
Click to expand...
Click to collapse
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) modelid: PN0712000
(bootloader) cidnum: BM___001
Click to expand...
Click to collapse
You can't use a 7.xx.xxx.x ruu unless your firmware is at least 6.xx.xxx.x (you're not)

alray said:
Remove your IMEI number from your above posts! Never post your IMEI.
How did you managed to change your CID with the phone being S-ON ?!!
You can't use a 7.xx.xxx.x ruu unless your firmware is at least 6.xx.xxx.x (you're not)
Click to expand...
Click to collapse
I removed my imei, thanks. I honestly thought this phone was S-OFF but I hadn't actually used it for much in over a year since I have a m8. Do you have any ideas of what I can do? my bootloader is now relocked and I can't seem to unlock it.

So i was able to flash a signed firmware onto my phone which for my carrier Bell Mobility, its 3.23.666.1. But now where can I go? i still can't seem to unlock the bootloader. any ideas?
my getvar info now.
C:\adb>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.55.0000
(bootloader) version-baseband: 4A.20.3263.16
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.23.666.1
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno:
(bootloader) imei:
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: BM___001
(bootloader) battery-status: good
(bootloader) battery-voltage: 3747mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-a6a74fd020
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.234s

Anyone with any ideas??? Please.

HuMpS 97 DoHc said:
Anyone with any ideas??? Please.
Click to expand...
Click to collapse
sorry I struggle to get on here sometimes during the week as my work takes over my life.
could you post a link to the 3.xx.666.x firmware you flashed please.

thats the firmware I used. https://www.dropbox.com/s/m1mha8jx36ceoe5/firmware.zip?dl=0
alray said:
Remove your IMEI number from your above posts! Never post your IMEI.
How did you managed to change your CID with the phone being S-ON ?!!
You can't use a 7.xx.xxx.x ruu unless your firmware is at least 6.xx.xxx.x (you're not)
Click to expand...
Click to collapse
Seanie280672 said:
sorry I struggle to get on here sometimes during the week as my work takes over my life.
could you post a link to the 3.xx.666.x firmware you flashed please.
Click to expand...
Click to collapse

HuMpS 97 DoHc said:
thats the firmware I used. https://www.dropbox.com/s/m1mha8jx36ceoe5/firmware.zip?dl=0
Click to expand...
Click to collapse
I'm unable to check it just yet, but it's just a zip file, so make sure it contains recovery.img, also when you flash it, you will need to flash it twice as the first time is just a pre update, after that, check that you have stock recovery by selecting recovery from the bootlpader screen, you should be presented with a red exclamation mark, volume up and power to get the menu, select factory reset.
Now boot to the bootloader and get a new unlock token from HTC dev website, and try and unlock your bootloader, once done, you can then flash twrp recovery, and flash your stock backup, will post the link later, then reflash stock recovery and update, or try and get s-off with rumrunner before updating.