Related
Hi guys, got a slight problem with entering fastboot mode. I hold the volume-up key and connect me USB cable but rather than getting the noise verifying it's been connected ok, I get that dull sound it makes when it hasn't worked. It won't even let me install the drivers and in device manager it comes up as "S1boot Fastboot" for a few seconds before then going into battery charging mode. I downloaded the Android SDK latest and replaced the USB driver INF file with the one sony give you but it didn't work so reversed back to the other driver the SDK manager installs and that didn't work either.
I've been through the tutorials and even tried to update the driver in device manager in the few seconds it stays there but that didn't work either! USB debugging is enabled too!
Please help, I'm not a noob and have done fastboot booting before and yes for those who may ask have already checked to make sure the bootloader can be unlocked and yes it can also the phone is NOT branded and is unlocked to all networks.
Any help will be appreciated, thanks!
Dave.
Are you on Windows 8? Using USB 3.0?
"As your flesh bears the sigil....your name is that....of a recusant."
First be sure you're using a 2.0 usb port, if this is ok maybe it's a windows 8 driver problem, so you should try this http://forum.xda-developers.com/showthread.php?t=2170114. It works for me
For also fastboot and flashmode come for 5 Sec. So Make sure you prepare the file and attach the device to fastboot or flashmode when it is asked.
Still problems
I'm still working on a 2012 laptop with Windows 7 Premium installed. It's fully up to date and all the drivers are installed properly I just don't get it, I've tried everything and it's still making the noise as if it won't connect. I don't know what to do to be honest. Also yes it is USB 2.0.
darkdemon32 said:
I'm still working on a 2012 laptop with Windows 7 Premium installed. It's fully up to date and all the drivers are installed properly I just don't get it, I've tried everything and it's still making the noise as if it won't connect. I don't know what to do to be honest. Also yes it is USB 2.0.
Click to expand...
Click to collapse
Hmm...how many USB ports are being used when you're flashing the phone?
"你看到了没? 爱让我流胆怯的泪..."
"Have you seen it? Love has made me cry cowardly tears..."
Fastboot with Xperia XP
I have the same problem, can't get it to fastboot mode.
Tried the Windows 8 zith USB 2, and also on XP machine where I was succesfully used it for a Xperia U.
Dump Windows..
Opensource rules!!! I switch on a VM with Windows only when I need Photohshop. Otw, Ubuntu and openSUSE FTW!!
sarkar1990 said:
Dump Windows..
Opensource rules!!! I switch on a VM with Windows only when I need Photohshop. Otw, Ubuntu and openSUSE FTW!!
Click to expand...
Click to collapse
Opensource forever)))
Sent from my ME371MG using xda app-developers app
same problem...
m having same kind of problem i was trying to flash boot img from cm 11 but fast boot isnt recognizing my device any more.my sp is rooted bootloader unlocked.fast boot was recognizing it yesterday.please tell me what to do
What I did was use a Windows XP machine.
Couldn't get it to work on my Windows 7/8, because of the restrictions in driver signatures.
Sent from my C5303 using Tapatalk
fastboot
darkdemon32 said:
Hi guys, got a slight problem with entering fastboot mode. I hold the volume-up key and connect me USB cable but rather than getting the noise verifying it's been connected ok, I get that dull sound it makes when it hasn't worked. It won't even let me install the drivers and in device manager it comes up as "S1boot Fastboot" for a few seconds before then going into battery charging mode. .
Click to expand...
Click to collapse
I have a similar problem. the power light lights up blue then passes into the phone starts loading mode
Sorry for bad English
The updated version (09.14) don't work properly. It doesn't enable me to go to Flashmode. Uninstalled and used the previous version and it worked as it should, no issues entering Flashmode.
i might have actually found the solution. im on the 4.3fw build version 12.1.a.1.201... in my case, my pc will automatically install the drivers for mass storage giving me no chance to update the driver to the one from sony.
you need to do step 9. and 10. if you havent done so from http://unlockbootloader.sonymobile.com/instructions
what i did was allow developer settings and allow debugging via usb.
plug in and attempt to go in to fastboot and obviously it'll fail.
go to device manager. (control panel->hardware and sound->device manager) quickly scroll down go to other devices. you will see s1fastboot (or something like that) if you're quick enough, if not, in my case, the phone will go in to charging mode.
what i did was to disable xperia sp mass storage from disk drives category too.
right click on it and select update driver software and you will select the file you've unzipped (following step 9 and 10 sony's instructions).
after it has finished updating, unplug your usb and attempt to enter fastboot, it should work.
PS: im no expert, this solution might be out there somewhere already or it could just be a great coincidence. some of these steps might not be useful even.
Had this problem and found a funny solution: I switched my cable and the port I was using. Both Ubuntu and Windoze 7 failed on both fastboot and flash mode, even though in both the phone would charge. I grabbed a spare micro USB cable and plugged it into the front of the PC; voila. Now the phone is rooted and running the latest CM.
Need a final solution for this problem
I don't know what to do!!! The problem is this, very similar to the others mentioned above,: When i conect my xperia sp to fastboot mode, pressing volume up while plugging in usb cable, the phone led turns to blue for few seconds and than it just turns to red showing on the screen the battery image( normal charging mode)...... I' m using windows xp and a rooted xperia sp whit cm11 (for locked bootloader obviously). Just two last things:
the phone can be unlocked( I checked it) and fastboot worked the same as now with stock xperia sp firmware.
Please i need a final and a certain solution for this problem!!!
i'll be very thankful to anyone who give me a hand!!!!
TheTras said:
I don't know what to do!!! The problem is this, very similar to the others mentioned above,: When i conect my xperia sp to fastboot mode, pressing volume up while plugging in usb cable, the phone led turns to blue for few seconds and than it just turns to red showing on the screen the battery image( normal charging mode)...... I' m using windows xp and a rooted xperia sp whit cm11 (for locked bootloader obviously). Just two last things:
the phone can be unlocked( I checked it) and fastboot worked the same as now with stock xperia sp firmware.
Please i need a final and a certain solution for this problem!!!
i'll be very thankful to anyone who give me a hand!!!!
Click to expand...
Click to collapse
Are you trying to unlock your phone?
Have you installed device specific/fastboot/flashmode drivers via FlashTool? If you are on Windows 8/8.1, you need to disable driver verification to get it done.
Alternatively if you just wanna unlock your bootloader, you can use the BLU option in FlashTool. Again all drivers will need to be properly installed for your phone to be detected correctly.
You say you had the same problem with stock firmware which means you probably haven't setup adb/fastboot properly on your PC. Does your phone get detected correctly in Device Manager? Have you tried installing drivers via Device Manager?
....
So the solution is installing flashtool and installato drivers via Emma?? Thanks forma the attention!!
TheTras said:
So the solution is installing flashtool and installato drivers via Emma?? Thanks forma the attention!!
Click to expand...
Click to collapse
I meant install drivers via FlashTool. Go to C:\Flashtool\drivers or wherever you have installed Flashtool and run the Flashtool-drivers.exe.
Select flashmode drivers, fastboot drivers and common drivers viskan board (SP drivers) and install them. Like I said if you are on Win 8/8.1, you will have to disable driver signature enforcement. Just look it up in YouTube and follow a tutorial.
Hey there,
After upgrading windows 8 to 8.1, I cannot get my phone into fastboot. It seems that previously installed drivers on W8 are now gone.
Any idea how to fix this?
jimilegolas said:
Hey there,
After upgrading windows 8 to 8.1, I cannot get my phone into fastboot. It seems that previously installed drivers on W8 are now gone.
Any idea how to fix this?
Click to expand...
Click to collapse
Install the drivers again.
I've had the same problem in windows 8.1... Fastboot device cannot be recognized by the system, but i don't know why; the problem was "Error enumerating device id". If you see hardware id, it doesn't exists and the driver won't be found. I returned to windows 7.
gregbradley said:
Install the drivers again.
Click to expand...
Click to collapse
Mind if you shared a way of doing that?
Installing the official sony flashtool with its drivers didn't help + every other way I tried (that worked when I had 8) also resulted in failure.
PS:When I connect it in fastboot, windows says that "drivers malfunctioned, unknown USB device"
jimilegolas said:
Mind if you shared a way of doing that?
Installing the official sony flashtool with its drivers didn't help + every other way I tried (that worked when I had 8) also resulted in failure.
PS:When I connect it in fastboot, windows says that "drivers malfunctioned, unknown USB device"
Click to expand...
Click to collapse
Have you tried the drivers from flashtool (Not the sony one, the one by androxyde here on xda)
gregbradley said:
Have you tried the drivers from flashtool (Not the sony one, the one by androxyde here on xda)
Click to expand...
Click to collapse
Yes, but I cannot install them.
Sent from my Xperia T using xda app-developers app
jimilegolas said:
Yes, but I cannot install them.
Sent from my Xperia T using xda app-developers app
Click to expand...
Click to collapse
You have to do it safe mode or something similar
read this from flashtool.net
http://www.flashtool.net/disabledrivers.php
gregbradley said:
You have to do it safe mode or something similar
read this from flashtool.net
http://www.flashtool.net/disabledrivers.php
Click to expand...
Click to collapse
I've done that, but I still get the same windows usb error :/
jimilegolas said:
I've done that, but I still get the same windows usb error :/
Click to expand...
Click to collapse
OK, not sure what the issue is then, can you get access to a win7 machine? There are no issues with drivers on win7
gregbradley said:
OK, not sure what the issue is then, can you get access to a win7 machine? There are no issues with drivers on win7
Click to expand...
Click to collapse
Guess this is the only option now.
Anyway, thanks.
jimilegolas said:
Guess this is the only option now.
Anyway, thanks.
Click to expand...
Click to collapse
Same problem here. See my post: http://forum.xda-developers.com/showpost.php?p=46645468&postcount=129
No solution found... Yet
fastboot for windows 8.1 over linux and this is my option to work fastboot on win 8.1
pietrucci said:
Hi,
Seems my usb drivers don't work anymore in Windows 8.1. Tried every version of usb-drivers, removed existing drivers, disabled digital signing again but no succes.
Anyone with a solution already?
Click to expand...
Click to collapse
load wubi (windows ubuntu installer) over the link http://wiki.ubuntuusers.de/Wubi
than install ubuntu, on harddrive C:// and reboot your Pc
Now you have a linux in your current system, you can remove ubuntu (linux) in Programms & feautures list in windows.
now reboot reboot the system and isntall in ubuntu fastboot.
you musst give in the terminal sudo apt-get fastboot
and now you can flash your bootloader in linux.
but you musst sudo bevor you type fastboot flash type sudo fastboot flash boot boot.img
you say it is easy
gooogle wubi (windows ubuntu installer)
im here.. me too facing the same weird problem.
in 8.1 os it worked at first but then it didnt recognizing my device. reinstalled the 8.1 os and tested and same result. worked at first then fu**ed up again.
hope someone will get ride of this prob in 8.1ois :/
Same..
Exactly the same problem here. On windows 8, no issue. After updating to 8.1, "Error enumerating device id". I've tried everything, but nothing.
I had my xperia without kernel, and I REALLY needed Fastboot, so I had to go to a W7 pc, and no issue then.
Ohh, and I can't disable driver verification on W8.1 . When i'm in advanced boot menu, I just can't press any key. The keyboard doesn't work, and I have to Hard Reboot. Any idea?
EDITED
This worked for me : http://www.droid-now.com/2013/10/fix-working-fastboot-drivers-windows-8-1-x64/
So now I can use fastboot/ flashmode, but only if I connect the phone to an usb 3.0 port. On 2.0 the issue is still there.
fedemyth said:
Exactly the same problem here. On windows 8, no issue. After updating to 8.1, "Error enumerating device id". I've tried everything, but nothing.
I had my xperia without kernel, and I REALLY needed Fastboot, so I had to go to a W7 pc, and no issue then.
Ohh, and I can't disable driver verification on W8.1 . When i'm in advanced boot menu, I just can't press any key. The keyboard doesn't work, and I have to Hard Reboot. Any idea?
EDITED
This worked for me : http://www.droid-now.com/2013/10/fix...ndows-8-1-x64/
So now I can use fastboot/ flashmode, but only if I connect the phone to an usb 3.0 port. On 2.0 the issue is still there.
Click to expand...
Click to collapse
Nice share brotha.
I want to make it work for x32 bit
Sent from my LT25i using XDA Premium 4 mobile app
As I see the only way to get access to fastboot and flash mode is to use windows 8 or lower.
Here is the cause of our problem and there is no solution so far: http://blogs.msdn.com/b/usbcoreblog...8-0-but-fail-on-windows-8-1-with-code-43.aspx
EDIT: I used the old XP machine of my parents to unlock the bootloader and everything worked fine
well w8.1 certainly cannot use fastboot if you plug it into USB 2.0 port..as microsoft has change it usb policies in w8.1, the only way to use fastboot in w8.1 is to plug into a USB 3.0 hub, and install your driver the same way before..
Hi guys!
Today i tried to flash android kitkat on android 4.1.2(stupid mistake)
I know that i need now flashtool and back official fw!
So when i connect my phone to computer it says unregonized device????[in flashmode]
Can someone help me!
Few days ago i installed windows 8?!
Here is SS:
http://prntscr.com/2fdg8b
KiaTheKing said:
Hi guys!
Today i tried to flash android kitkat on android 4.1.2(stupid mistake)
I know that i need now flashtool and back official fw!
So when i connect my phone to computer it says unregonized device????[in flashmode]
Can someone help me!
Few days ago i installed windows 8?!
Here is SS:
http://prntscr.com/2fdg8b
Click to expand...
Click to collapse
have u tried other USB port ?
Drivers installed properly?
Remove Sonymobile drivers and reinstall them.
This should do the trick. I also advice you to restore your device on a Windows 7 machine. I am unable to restore mine on my Windows 8.1 machine and I have to use the one from my sister to restore my device.
Sounds like you are using Windows 8/8,1
Try again on a Windows 7 machine.
DjTony90 said:
have u tried other USB port ?
Click to expand...
Click to collapse
I tried it just now!
On usb 2.0 is same but on usb 3.0 is like that (SS): http://prntscr.com/2fdknd
Windows 8 and 8.1 have problematic drivers. I suggest you use windows 7 to flash a stock ftf
Sent from my C5303 using XDA Premium 4 mobile app
Ohhhhh is there any way to do it?
Or need to restore windows 7?!
There is a way. Download stock FTF, install flashtool on a Windows 7 device and restore.
Windows 8/8.1 got problems with the drivers. These problems cause connection issues with your Xperia SP and Flashtool
KiaTheKing said:
Ohhhhh is there any way to do it?
Or need to restore windows 7?!
Click to expand...
Click to collapse
On flashtool official download site, go to FAQ, it has instruction on how to install drivers on Windows 8.
http://www.flashtool.net/disabledrivers.php
*However, I tried it myself, but wasn't able to get it to work. (most likely because of my AMD USB filter driver problem)
You can check it out and try.
Are you using Windows 8.1 64bit? if that is the case, I can help...I have a solution. but first I have to go back to my home. the main thing is you have to uninstall USB driver from Microsoft and install modified intel driver for this purpose...
sadique_shiblee said:
Are you using Windows 8.1 64bit? if that is the case, I can help...I have a solution. but first I have to go back to my home. the main thing is you have to uninstall USB driver from Microsoft and install modified intel driver for this purpose...
Click to expand...
Click to collapse
Yup win 8 64 bit!?
KiaTheKing said:
Yup win 8 64 bit!?
Click to expand...
Click to collapse
Sorry, here is your solution...
http://forum.xda-developers.com/showthread.php?t=2511210
comscier said:
On flashtool official download site, go to FAQ, it has instruction on how to install drivers on Windows 8.
http://www.flashtool.net/disabledrivers.php
*However, I tried it myself, but wasn't able to get it to work. (most likely because of my AMD USB filter driver problem)
You can check it out and try.
Click to expand...
Click to collapse
SO my problem with drivers is solved!
but i get this when i try to flash!?
http://prntscr.com/2fdknd
KiaTheKing said:
SO my problem with drivers is solved!
but i get this when i try to flash!?
http://prntscr.com/2fdknd
Click to expand...
Click to collapse
Because of the problems with the connection of the phone via Windows 8/8.1 and flashtool. Also touching the phone or cable will give this issues..
mrjraider said:
Because of the problems with the connection of the phone via Windows 8/8.1 and flashtool. Also touching the phone or cable will give this issues..
Click to expand...
Click to collapse
What i need to do?!
KiaTheKing said:
What i need to do?!
Click to expand...
Click to collapse
Got a PC with windows 7?
mrjraider said:
Got a PC with windows 7?
Click to expand...
Click to collapse
YUp! But im not home!
I will be there for 20 days and i need phone -.-!
Alright lets do the following things:
- Remove Flashtool and its drivers
- Reboot pc
- Follow this to install Flashtool and the drivers correct: http://forum.xda-developers.com/showthread.php?t=2095087 (only the drivers required for Flashmode and Fastboot)
- Reboot again
- Connect phone in Flashmode (dont open flashtool) and let it install the drivers
- Reboot again
- Connect phone in Fastboot (dont open flashtool) and let it install the drivers
- Reboot (last time) again
- After reboot, open Flashtool and connect phone in flashmode (dont do anything) and wait a few minutes. Via the log of Flashtool you should be able to see if the phone is connected properly and if the phone stays connected
- Try to flash a Stock ROM and see what happends
If above fails then you can try to use compatible mode (flashtool.exe > Rightmouse button > Properties > Compatible mode > Windows 7)
mrjraider said:
Alright lets do the following things:
- Remove Flashtool and its drivers
- Reboot pc
- Follow this to install Flashtool and the drivers correct: http://forum.xda-developers.com/showthread.php?t=2095087 (only the drivers required for Flashmode and Fastboot)
- Reboot again
- Connect phone in Flashmode (dont open flashtool) and let it install the drivers
- Reboot again
- Connect phone in Fastboot (dont open flashtool) and let it install the drivers
- Reboot (last time) again
- After reboot, open Flashtool and connect phone in flashmode (dont do anything) and wait a few minutes. Via the log of Flashtool you should be able to see if the phone is connected properly and if the phone stays connected
- Try to flash a Stock ROM and see what happends
If above fails then you can try to use compatible mode (flashtool.exe > Rightmouse button > Properties > Compatible mode > Windows 7)
Click to expand...
Click to collapse
Thank you!
I reinstalled windows and it works!
WINDOWS 8 is sh..
As the title says I can't flash it (2.3.6 gb). Everytime I connect the phone in download mode I get 'USB Not Recognized' error, I've updated KIES drivers already and nothing happened.
Sorry, but I don't know how to help you. I got the same problem when I used my Windows 8 PC.
On my WinXP PC, it's worked.
I'll give a try on XP , too. I tried on Win 8.1 and 7 and didn't worked.
fordawin said:
As the title says I can't flash it (2.3.6 gb). Everytime I connect the phone in download mode I get 'USB Not Recognized' error, I've updated KIES drivers already and nothing happened.
Click to expand...
Click to collapse
tomi456 said:
Sorry, but I don't know how to help you. I got the same problem when I used my Windows 8 PC.
On my WinXP PC, it's worked.
Click to expand...
Click to collapse
fordawin said:
I'll give a try on XP , too. I tried on Win 8.1 and 7 and didn't worked.
Click to expand...
Click to collapse
First, you have to install SAMSUNG USB Driver into your PC
Then only you can Flash your firmware with Odin
USB Driver: http://www.mediafire.com/download/7srv709j7nkivj0/SAMSUNG_USB_Driver_for_Mobile_Phones.exe
Odin Multi downloader: http://d-h.st/6Rx
Samsung usb drivers works only with Win7, xp, and older than these
Whole discription about "how to" is here: http://forum.xda-developers.com/showthread.php?t=1255305
Enjoy and press thanks button
Also enable USB debugging in phone's settings(if not done yet)
Hey guys,
long story short: I flashed my device and now my pc wont recognise the usb-connection between my phone and computer. The hardware-manager describes as if the phone cant tell the computer that it is a z3 compact.
Errormessage: Unknown USB-device (Cannot get the device description)
*something like that*
what I did to troubleshoot:
- reflash the device with firmeware: A.1.264 (without this strange script)
- reflash the device with the concept preview (without this strange script)
- installed PC Companion from Sony
- Linux cant see the phone, but can flash it
- USB-Debugging wont work as well
Nothing worked for me so far. Anyone an idea what to do?
thanks in advance
Nummer35 said:
Hey guys,
long story short: I flashed my device and now my pc wont recognise the usb-connection between my phone and computer. The hardware-manager describes as if the phone cant tell the computer that it is a z3 compact.
Errormessage: Unknown USB-device (Cannot get the device description)
*something like that*
what I did to troubleshoot:
- reflash the device with firmeware: A.1.264 (without this strange script)
- reflash the device with the concept preview (without this strange script)
- installed PC Companion from Sony
- Linux cant see the phone, but can flash it
- USB-Debugging wont work as well
Nothing worked for me so far. Anyone an idea what to do?
thanks in advance
Click to expand...
Click to collapse
I tried a fresh install of windows 10 and flashed the official 6.0.1 update fia .zip
NOTHING HELPED any ideas?
Nummer35 said:
NOTHING HELPED any ideas?
Click to expand...
Click to collapse
Some roms come with the usb functions disabled, removed as bloatware. So it's possible the first rom you tried didn't have the usb functions installed.
Do you have the correct drivers
Presumably flashtool can see your phone and it's still charging, so I'm sure the hardware is ok.
Did you try a repair with PC companion?
Do you have a different usb lead you can try?
Didgesteve said:
Some roms come with the usb functions disabled, removed as bloatware. So it's possible the first rom you tried didn't have the usb functions installed.
Do you have the correct drivers
Presumably flashtool can see your phone and it's still charging, so I'm sure the hardware is ok.
Did you try a repair with PC companion?
Do you have a different usb lead you can try?
Click to expand...
Click to collapse
Hey,
thanks for your answere. I found a "solution" to connect the phone via fastboot to the pc and with this I could do a complete reset with the PCC. When the phone is booted however I get the same error message over and over again: Cant get a device description!
Maybe you can look up the specific driver which is used in the device-manager so I can force windows to use this one?
Nummer35 said:
Hey,
thanks for your answere. I found a "solution" to connect the phone via fastboot to the pc and with this I could do a complete reset with the PCC. When the phone is booted however I get the same error message over and over again: Cant get a device description!
Maybe you can look up the specific driver which is used in the device-manager so I can force windows to use this one?
Click to expand...
Click to collapse
Did you install the ADB drivers that come with flashtool? Look in the install folder for a folder called 'drivers' run the exe in there and tik the fist two and then Z3c.
Yep, all three unsigned drivers.