[Q] help with htc one dev edition with stock android - One (M7) Q&A, Help & Troubleshooting

hi, i just bought on ebay an htc one developer edition the one that comes with 64gb and it came preloaded with google 4.4 kitkat google play edition, and i want to flash android revolution hd o get back to the stock htc rom. but when i try to enter to the recovery like i used to do with my old htc one 32gb it seems like it doesnt have any recovery because it says "no command" just after a little image of an android appear. i dont know the procces of the developer edition... i dont know if im explaining good my problem but i know u guys know more than me. so hope u can answer my Q. thank you very much

Are you Soff?
sent from my mobile device

luismendez said:
hi, i just bought on ebay an htc one developer edition the one that comes with 64gb and it came preloaded with google 4.4 kitkat google play edition, and i want to flash android revolution hd o get back to the stock htc rom. but when i try to enter to the recovery like i used to do with my old htc one 32gb it seems like it doesnt have any recovery because it says "no command" just after a little image of an android appear. i dont know the procces of the developer edition... i dont know if im explaining good my problem but i know u guys know more than me. so hope u can answer my Q. thank you very much
Click to expand...
Click to collapse
can you copy paste the output of this command:
Code:
fastboot getvar all
remove emei and sn

Microsoft Windows [Version 6.1.7600]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:\Users\luis>fastboot getvar all
INFOversion: 0.5
INFOversion-bootloader: 1.54.0000
INFOversion-baseband: 4T.21.3218.21
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 3.62.1700.1
INFOversion-misc: PVT SHIP S-OFF
INFOserialno:
INFOimei:
INFOmeid: 00000000000000
INFOproduct: m7_ul
INFOplatform: HBOOT-8064
INFOmodelid: PN0712000
INFOcidnum: GOOGL001
INFObattery-status: good
INFObattery-voltage: 3822mV
INFOpartition-layout: Generic
INFOsecurity: off
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: dirty-0e82187e
INFOhbootpreupdate: 11
INFOgencheckpt: 0
all: Done!
finished. total time: 0.068s
C:\Users\luis>

Microsoft Windows [Version 6.1.7600]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:\Users\luis>fastboot getvar all
INFOversion: 0.5
INFOversion-bootloader: 1.54.0000
INFOversion-baseband: 4T.21.3218.21
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 3.62.1700.1
INFOversion-misc: PVT SHIP S-OFF
INFOserialno:
INFOimei:
INFOmeid: 00000000000000
INFOproduct: m7_ul
INFOplatform: HBOOT-8064
INFOmodelid: PN0712000
INFOcidnum: GOOGL001
INFObattery-status: good
INFObattery-voltage: 3822mV
INFOpartition-layout: Generic
INFOsecurity: off
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: dirty-0e82187e
INFOhbootpreupdate: 11
INFOgencheckpt: 0
all: Done!
finished. total time: 0.068s
C:\Users\luis>

luismendez said:
Microsoft Windows [Version 6.1.7600]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:\Users\luis>fastboot getvar all
INFOversion: 0.5
INFOversion-bootloader: 1.54.0000
INFOversion-baseband: 4T.21.3218.21
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 3.62.1700.1
INFOversion-misc: PVT SHIP S-OFF
INFOserialno: Remove me
INFOimei: Remove me
INFOmeid: 00000000000000
INFOproduct: m7_ul
INFOplatform: HBOOT-8064
INFOmodelid: PN0712000
INFOcidnum: GOOGL001
INFObattery-status: good
INFObattery-voltage: 3822mV
INFOpartition-layout: Generic
INFOsecurity: off
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: dirty-0e82187e
INFOhbootpreupdate: 11
INFOgencheckpt: 0
all: Done!
finished. total time: 0.068s
C:\Users\luis>
Click to expand...
Click to collapse
edit you post above
I can help, it should be pretty easy as you all ready s-off
also in the bootloader screen are you unlocked / relocked ?

thank you i edited the post. now im trying to flash de oficial ruu but im getting error 155. now i haver relocked my phone in order to make it work, and i have read that i need to flash hboot 1.44 for it to stop giving me that error... any help its welcome

If your bootloader says unlocked
the first step is flash a custom recovery
I recommend TWRP 2.6.3.4 from here - http://techerrata.com/browse/twrp2/m7ul
the command to flash it is
fastboot flash recovery recovery_name.img
fastboot erase cache
fastboot reboot-bootloader
Click to expand...
Click to collapse
now change your CID
fastboot oem writecid BS_US001
The next step I would download this and change you phone to developers edition
http://www.htc1guru.com/dld/guru_reset_m7_3-22-1540-1-zip/
---------- Post added at 06:56 PM ---------- Previous post was at 06:54 PM ----------
luismendez said:
thank you i edited the post. now im trying to flash de oficial ruu but im getting error 155. now i haver relocked my phone in order to make it work, and i have read that i need to flash hboot 1.44 for it to stop giving me that error... any help its welcome
Click to expand...
Click to collapse
who's instructions are you following ?

luismendez said:
thank you i edited the post. now im trying to flash de oficial ruu but im getting error 155. now i haver relocked my phone in order to make it work, and i have read that i need to flash hboot 1.44 for it to stop giving me that error... any help its welcome
Click to expand...
Click to collapse
UPDATE: now when trying to flash hboot 1.44 i got this error: FAILED (remote: 41 model id check fail)

clsA said:
If your bootloader says unlocked
the first step is flash a custom recovery
I recommend TWRP 2.6.3.4 from here - http://techerrata.com/browse/twrp2/m7ul
the command to flash it is
now change your CID
fastboot oem writecid BS_US001
The next step I would download this and change you phone to developers edition
http://www.htc1guru.com/dld/guru_reset_m7_3-22-1540-1-zip/
---------- Post added at 06:56 PM ---------- Previous post was at 06:54 PM ----------
who's instructions are you following ?
Click to expand...
Click to collapse
the ones in this post.
http://forum.xda-developers.com/showthread.php?t=2498069

luismendez said:
UPDATE: now when trying to flash hboot 1.44 i got this error: FAILED (remote: 41 model id check fail)
Click to expand...
Click to collapse
you simply edit the android-info.txt file in the firmware.zip to match your phone. PN0712000 and GOOGL001
---------- Post added at 07:05 PM ---------- Previous post was at 07:02 PM ----------
luismendez said:
the ones in this post.
http://forum.xda-developers.com/showthread.php?t=2498069
Click to expand...
Click to collapse
their are much newer guides to use .. try this
http://forum.xda-developers.com/showthread.php?t=2541082
if you had not relocked the bootloader it would have been much simpler to follow the instructions i posted above

clsA said:
If your bootloader says unlocked
the first step is flash a custom recovery
I recommend TWRP 2.6.3.4 from here - http://techerrata.com/browse/twrp2/m7ul
the command to flash it is
now change your CID
fastboot oem writecid BS_US001
The next step I would download this and change you phone to developers edition
http://www.htc1guru.com/dld/guru_reset_m7_3-22-1540-1-zip/
---------- Post added at 06:56 PM ---------- Previous post was at 06:54 PM ----------
who's instructions are you following ?
Click to expand...
Click to collapse
clsA said:
you simply edit the android-info.txt file in the firmware.zip to match your phone. PN0712000 and GOOGL001
---------- Post added at 07:05 PM ---------- Previous post was at 07:02 PM ----------
their are much newer guides to use .. try this
http://forum.xda-developers.com/showthread.php?t=2541082
if you had not relocked the bootloader it would have been much simpler to follow the instructions i posted above
Click to expand...
Click to collapse
ok so im now in hboot 1.44 and now i will try to flash the RUU that i just download from htcdev.. thats what i nhave to do right?

luismendez said:
ok so im now in hboot 1.44 and now i will try to flash the RUU that i just download from htcdev.. thats what i nhave to do right?
Click to expand...
Click to collapse
yeah which RUU did you choose ?

clsA said:
yeah which RUU did you choose ?
Click to expand...
Click to collapse
RUU_M7_UL_JB43_SENSE50_MR_BrightstarUS_WWE_3.22.1540.1.exe

luismendez said:
RUU_M7_UL_JB43_SENSE50_MR_BrightstarUS_WWE_3.22.1540.1.exe
Click to expand...
Click to collapse
yeyyyy i changed mo CID from googl001 to the one that mention in this post and now its flashing the RUU do i need to unlock again my boot loader after this or it do for me automatically since is the developer edition RUU?

luismendez said:
yeyyyy i changed mo CID from googl001 to the one that mention in this post and now its flashing the RUU do i need to unlock again my boot loader after this or it do for me automatically since is the developer edition RUU?
Click to expand...
Click to collapse
your s-off you can unlock it using this -
http://forum.xda-developers.com/showthread.php?t=2475914

clsA said:
your s-off you can unlock it using this -
http://forum.xda-developers.com/showthread.php?t=2475914
Click to expand...
Click to collapse
thank you man you helped me ALOT!!! thank you very very much!!

luismendez said:
thank you man you helped me ALOT!!! thank you very very much!!
Click to expand...
Click to collapse
your welcome .. use the Thanks button so others will know

Related

[Q] modelid is PN071*****?

Is that supposed to happen? Is it safe to assume that my mid is PN0710000 then? if not, how should I fix this?
Wait, where is written this MID?
in adb when trying to fastboot getvar all. It probably didn't help that it says getvar all failed, but I'm stuck here
Wait, if you will you the command:
Code:
fastboot getvar all
you musb be in fastboot usb.
If you're in android, you can boot in fastboot with the command:
Code:
adb reboot bootloader[/url] and now you can use the getvar.
p.s. Post it here deleting imei and serial number :)
I did it just like that, did it a couple more times just to make sure, and still got the same result. Anyways:
C:\adb>fastboot getvar all
INFOversion: 0.5
INFOversion-bootloader: 1.44.0000
INFOversion-baseband: 4A.14.3250.13
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 5.29.401.13
INFOversion-misc: PVT SHIP S-OFF
INFOserialno: xxxxxxxxxx
INFOimei: xxxxxxxxx
INFOmeid: 00000000000000
INFOproduct: m7_ul
INFOplatform: HBOOT-8064
INFOmodelid: PN071****
INFOcidnum: 11111111
INFObattery-status: good
INFObattery-voltage: 4310mV
INFOpartition-layout: Generic
INFOsecurity: off
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
getvar:all FAILED (status read failed (Too many links))
finished. total time: 0.067s
Click to expand...
Click to collapse
please tell me this can be fixed...
Habel said:
I did it just like that, did it a couple more times just to make sure, and still got the same result.
Click to expand...
Click to collapse
Your version main start with 5, when the latest base starts with 3, and this is strange.
However, have you flashed some firmware in this period?
Probably there is a solution, but i don't know atm.
well, I just bought this phone yesterday (yay me), realized something was off when I couldn't OTA update (which is because of S-off), and now afraid to just flash the new 3.62 firmware because of the stars (asterisks?). could it be i did something wrong with the commands?
Try to flash a ruu for your phone
ok, I'll take a look at that. thanks for your help Guich
edit: what kind of RUU should I get? do i need to match it with the bootloader or something else, or any one of them works?
Habel said:
ok, I'll take a look at that. thanks for your help Guich
edit: what kind of RUU should I get? do i need to match it with the bootloader or something else, or any one of them works?
Click to expand...
Click to collapse
A ruu compatible with your cid
Because you're s-off and all ruu can be flashed fine!
hey Guich, I took your advice and tried to flash the RUU, but now i'm getting very confused. the flashing went fine, but I see no changes on my phone. In Settings>About>Software Information the software version is still 1.29.401.13, while getvar all shows me that the version is 3.62.401.1. Is there anything I'm misunderstanding here?
edit: do i need to unlock the bootloader for any of this?
I have same PN071**** I dont remember what was there before I have it from Ebay probly some Chinesse version but the cover say that it is PN714000, I accidently changed S-OFF to S On and flashed another rom.I cant do S-OFF anymore tried many things. Riffbox doesnt work with 714000 unfortunately.

[SOLVED] Google'd and Google'd but still need help

Hi guys
I have looked and looked but need some help
I have a HTC One which I successfully converted to a "stock" GPE with no problems, but I have found that I miss some little bit HTC Zoe for example.I can detect the device with ADB and can use oem writecid to change to HTC__001 which I need to flash the RUU.zip
I have tried tool kits and adb but I am having no luck with the following.
Changing the MID so I can flash a stock RUU
Unlocking the RELOCKED bootloader
I have S-Off
Below is where I am at the moment.
******RELOCKED*******
M7_UL PVT SHIP S-OFF RH
CID-GOOGL001
HBOOT- 1.54. 0000
RADIO-4T. 21. 3218. 21
OpenDSP-v32. 120. 274. 0909
OS- 3.62. 1700. 1
eMMC-boot 2048MB
Dec 9 2013, 00:38:19. 0
Any help or guidance would be great
lspec230 said:
Hi guys
I have looked and looked but need some help
I have a HTC One which I successfully converted to a "stock" GPE with no problems, but I have found that I miss some little bit HTC Zoe for example.I can detect the device with ADB and can use oem writecid to change to HTC__001 which I need to flash the RUU.zip
I have tried tool kits and adb but I am having no luck with the following.
Changing the MID so I can flash a stock RUU
Unlocking the RELOCKED bootloader
I have S-Off
Below is where I am at the moment.
******RELOCKED*******
M7_UL PVT SHIP S-OFF RH
CID-GOOGL001
HBOOT- 1.54. 0000
RADIO-4T. 21. 3218. 21
OpenDSP-v32. 120. 274. 0909
OS- 3.62. 1700. 1
eMMC-boot 2048MB
Dec 9 2013, 00:38:19. 0
Any help or guidance would be great
Click to expand...
Click to collapse
With S-OFF you don't need an unlocked bootloader tu flash in ruu mode.
so change your CID to HTC__001:
Code:
fastboot oem writecid HTC__001
fastboot reboot-bootloader
then use this tool to change MID back to PN0710000
you must use this tool from custom recovery so if you are on stock recovery, yes you will have to unlock bootloader again and flash latest twrp recovery.Unlock Via htcdev or with s-off method, as you wish.
then follow nkk71's guide to return to stock (linked in my signature below). Follow post #1 and #3 (use ruu.zip method) with 1.28.401.7 ruu.zip from htc1guru.com
Thanks for your help
alray said:
With S-OFF you don't need an unlocked bootloader tu flash in ruu mode.
so change your CID to HTC__001:
Code:
fastboot oem writecid HTC__001
fastboot reboot-bootloader
then use this tool to change MID back to PN0710000
you must use this tool from custom recovery so if you are on stock recovery, yes you will have to unlock bootloader again and flash latest twrp recovery.Unlock Via htcdev or with s-off method, as you wish.
then follow nkk71's guide to return to stock (linked in my signature below). Follow post #1 and #3 (use ruu.zip method) with 1.28.401.7 ruu.zip from htc1guru.com
Click to expand...
Click to collapse
I used HTCDev to get unlock, I have kept the unlock.bin but it doesn't seem to work now.....is that because I have changed CID and MID? Do i need to go back to HTCDev and get another unlock
Thanks for the quick reply...exactly what i needed a clear concise way ahead rather than me stumbling around with frustration
@lspec230 just to be sure you see that I have edited my above post with additional info
if you have more questions, just ask here. I'll be back in a few hours but im sure others members will assist you here.
---------- Post added at 06:14 PM ---------- Previous post was at 06:14 PM ----------
lspec230 said:
I used HTCDev to get unlock, I have kept the unlock.bin but it doesn't seem to work now.....is that because I have changed CID and MID? Do i need to go back to HTCDev and get another unlock
Thanks for the quick reply...exactly what i needed a clear concise way ahead rather than me stumbling around with frustration
Click to expand...
Click to collapse
You need a new unlock code each time
ARGH...Unlock not working
alray said:
@lspec230 just to be sure you see that I have edited my above post with additional info
if you have more questions, just ask here. I'll be back in a few hours but im sure others members will assist you here.
---------- Post added at 06:14 PM ---------- Previous post was at 06:14 PM ----------
You need a new unlock code each time
Click to expand...
Click to collapse
I went to HTCDev and got a new Unlock_code.bin with no trouble at all.
Used the following and all appears to push to the device but then nothing, I dont get the HTC Bootloader splash screen asking if i want to proceed.
C:\Users\Neil\Downloads\adt-bundle-windows-x86_64-20131030\adt-bundle-windows-x8
6_64-20131030\sdk\platform-tools>fastboot flash unlocktoken Unlock_code.bin
target reported max download size of 1526722560 bytes
sending 'unlocktoken' (0 KB)...
OKAY [ 0.155s]
writing 'unlocktoken'...
(bootloader) unlock token check successfully
OKAY [ 0.006s]
finished. total time: 0.161s
Forget about the bootloader unlocking. Change MID/CID and flash a full RUU!
Luckily you are soff
---------- Post added at 10:13 PM ---------- Previous post was at 10:12 PM ----------
Also, are you rooted?
Still no luck
Not sure what's going on....I cant install TWRP on there to change the MID or Flash a stock RUU
I tried from ADB and for past experience from Samsung also copied it to the phone hoping I could flash from recovery, but there isn't an option for that.
Cant help but think the RELOCKED flag is causing the problems.
I will try a factory reset and cache/partition wipe and start again.
I suppose one option is to flash a RUU that will work with my current MID. Then start the process from there.....
lspec230 said:
Not sure what's going on....I cant install TWRP on there to change the MID or Flash a stock RUU
I tried from ADB and for past experience from Samsung also copied it to the phone hoping I could flash from recovery, but there isn't an option for that.
Cant help but think the RELOCKED flag is causing the problems.
I will try a factory reset and cache/partition wipe and start again.
I suppose one option is to flash a RUU that will work with my current MID. Then start the process from there.....
Click to expand...
Click to collapse
can you post the current "fastboot getvar all" (excluding IMEI and s/n) and I'll post a package for you.
getvar
nkk71 said:
can you post the current "fastboot getvar all" (excluding IMEI and s/n) and I'll post a package for you.
Click to expand...
Click to collapse
C:\Users\Neil\Downloads\adt-bundle-windows-x86_64-20
6_64-20131030\sdk\platform-tools>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.54.0000
(bootloader) version-baseband: 4T.21.3218.21
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.62.1700.1
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: GOOGL001
(bootloader) battery-status: good
(bootloader) battery-voltage: 3822mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-0e82187e
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.066s
There you go...This has now got personal, I could stay with GPE but I amnow determined to get this to work!!
Many thanks for the help so far...really appreciate it
lspec230 said:
C:\Users\Neil\Downloads\adt-bundle-windows-x86_64-20
6_64-20131030\sdk\platform-tools>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.54.0000
(bootloader) version-main: 3.62.1700.1
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) modelid: PN0712000
(bootloader) cidnum: GOOGL001
all: Done!
finished. total time: 0.066s
There you go...This has now got personal, I could stay with GPE but I amnow determined to get this to work!!
Many thanks for the help so far...really appreciate it
Click to expand...
Click to collapse
Here you go, download that, then
fastboot erase cache
fastboot oem rebootRUU
fastboot flash zip fw_TWRP_2.6.3.3.zip
fastboot reboot-bootloader
-> enter TWRP, use Guru Bootloader Reset tool, or scotty's adb command to unlock
Thanks for your help
nkk71 said:
Here you go, download that, then
fastboot erase cache
fastboot oem rebootRUU
fastboot flash zip fw_TWRP_2.6.3.3.zip
fastboot reboot-bootloader
-> enter TWRP, use Guru Bootloader Reset tool, or scotty's adb command to unlock
Click to expand...
Click to collapse
All sorted thanks so much for the help
Not sure if I will even understand but what was going wrong?
:good:
lspec230 said:
All sorted thanks so much for the help
Not sure if I will even understand but what was going wrong?
:good:
Click to expand...
Click to collapse
now follow @alray's instructions to change MID and CID, and flash stock Sense ruu.zip
remember to stay S-Off, and in my guide check "Not so FAQ #2" to see what was wrong.
ALL DONE!
nkk71 said:
now follow @alray's instructions to change MID and CID, and flash stock Sense ruu.zip
remember to stay S-Off, and in my guide check "Not so FAQ #2" to see what was wrong.
Click to expand...
Click to collapse
To all who helped many thanks.....now back on sense!! that was a mission!!
lspec230 said:
To all who helped many thanks.....now back on sense!! that was a mission!!
Click to expand...
Click to collapse
Congrats,
if you could also edit main thread title to include [SOLVED], thanks
One last question...OTA updates
nkk71 said:
Congrats,
if you could also edit main thread title to include [SOLVED], thanks
Click to expand...
Click to collapse
Followed your guide, and went S-On thinking i would get OTA's is this right?
I have included my getvar all
C:\Users\Neil\Downloads\adt-bundle-windows-x86_64-201310
6_64-20131030\sdk\platform-tools>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.43.0000
(bootloader) version-baseband: 4A.13.3227.06
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.20.401.1
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 3828mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
getvar:all FAILED (status read failed (Too many links))
finished. total time: 0.054s
Also attached is my software info
lspec230 said:
Followed your guide, and went S-On thinking i would get OTA's is this right?
I have included my getvar all
C:\Users\Neil\Downloads\adt-bundle-windows-x86_64-201310
6_64-20131030\sdk\platform-tools>fastboot getvar all
(bootloader) version-bootloader: 1.43.0000
(bootloader) version-main: 1.20.401.1
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) product: m7_ul
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__001
Also attached is my software info
Click to expand...
Click to collapse
1- Why oh why did you go S-On?? You don't need S-On for OTAs
2- Why dint you read this: "---------> Note: M7_UL .401. users don't use 1.20.401.1, use 1.28.401.7 instead"
Okay so now you're S-On, bootloader locked or unlocked?
bootloader has to be locked or relocked, then go ahead and flash the 1.28.401.7 ruu.zip, then get S-Off!
then stay UNLOCKED and S-Off and take all the OTAs you like then report back
any reason you need S-On??
nkk71 said:
1- Why oh why did you go S-On?? You don't need S-On for OTAs
2- Why dint you read this: "---------> Note: M7_UL .401. users don't use 1.20.401.1, use 1.28.401.7 instead"
Okay so now you're S-On, bootloader locked or unlocked?
bootloader has to be locked or relocked, then go ahead and flash the 1.28.401.7 ruu.zip, then get S-Off!
then stay UNLOCKED and S-Off and take all the OTAs you like
any reason you need S-On??
Click to expand...
Click to collapse
Because I am a FOOL!!! I missed that by not reading properly....
lspec230 said:
Because I am a FOOL!!! I missed that by not reading properly....
Click to expand...
Click to collapse
okay, so slow it down a little, take a deep breath and no panicking or rushing things!!! okay?
Here's what you're going to do:
1- lock/relock bootloader
2- flash ruu.zip 1.28.401.7
3- DO NOT TAKE ANY OTAs
4- use revone, to get S-Off, and unlock your phone
Once that is done report back, if you have questions, please go ahead ask before doing things
---------- Post added at 02:56 PM ---------- Previous post was at 02:50 PM ----------
lspec230 said:
Because I am a FOOL!!! I missed that by not reading properly....
Click to expand...
Click to collapse
PS: if ruu.zip fails, giving "signature fail" it's cause it's not signed and you are now S-ON.
in that case use RUU.EXE: http://www.htc1guru.com/dld/ruu_m7_...1-27_10-31-1131-05_release_310878_signed-exe/
no need to "downgrade hboot", just run the RUU.EXE, NOTHING ELSE and report back with a "fastboot getvar all"
lspec230 said:
Because I am a FOOL!!! I missed that by not reading properly....
Click to expand...
Click to collapse
alray said:
Follow post #1 and #3 (use ruu.zip method) with 1.28.401.7 ruu.zip from htc1guru.com
Click to expand...
Click to collapse
2) RUU.ZIP (Windows7, Mac, Linux): http://www.htc1guru.com/downloads/ruu-zip-downloads/ <- this is now the preferred method instead of RUU.EXE
------> if you’ve found a RUU.ZIP proceed to post 3
---------> Note: M7_UL .401. users don't use 1.20.401.1, use 1.28.401.7 instead
Click to expand...
Click to collapse
hopefully you did not bricked your phone here,just take your time to read carefully next time
alray said:
hopefully you did not bricked your phone here,just take your time to read carefully next time
Click to expand...
Click to collapse
i don't think a brick is involved, but i guess i need to do some revisions about the S-On part (when it's needed and when not ), but as someone mentioned, the guide is "cluttered" already :crying:
@lspec230 any progress mate?

[Q] No OS Loaded

Okay. So, here's the deal. I got a 64GB HTC One developer's edition via trade. The previous owner had the bootloader unlocked, S-OFF, SIM unlocked, rooted and a custom ROM loaded (Revolution HD I believe he said). Anyways, he did a factor reset on the phone to get all his info off and when he handed it to me it was still booting up. I didn't think anything of it until I get home and it is stuck on the HTC splash screen with the red text at the bottom saying that this is for development blah blah blah.
I boot into bootloader and then go into recovery and it's Team Win's touch recovery. Okay, cool. I start looking through everything and decide to try another factory reset and after that's done I go to reboot it and it says "No OS loaded...." at the top. WTF?!?! No OS? So, then I go to the file manager and look through everything on the /sdcard/ and there's no zip files, nothing, nada, zilch, big MF'n goose egg.
I've tried everything that I know to do and haven't had any luck. So far I have managed to flash CWM recovery, but I can't mount USB storage to copy over a ROM file. I also noticed that in fastboot the device is recognized, but in adb it isn't (found this out by using the devices command in both adb and fastboot and only got it listed in fastboot). I've attempted to sideload, but that's done thru adb and the device isn't recognized there. I tried flashing it to the /sdcard/ partition via fastboot, but got an error message of this: writing ' /sdcard/ ' ... FAILED (remote: not allowed)
Sooooooo..... help would be greatly appreciated! :laugh:
Output of fastboot getvar all and is bootloader locked or unlocked? do not lock it.
Also when you click install in twrp, does it show the sdcard size or says 0MB?
sent from my mobile device
---------- Post added at 11:53 PM ---------- Previous post was at 11:49 PM ----------
Also fastboot command only work in fastboot mode. ADB commands only work in recovery or when you are booted in OS. ADB does not work in fastboot mode, and fastboot command does not work in recovery or booted OS
sent from my mobile device
SaHiLzZ said:
Output of fastboot getvar all and is bootloader locked or unlocked? do not lock it.
Also when you click install in twrp, does it show the sdcard size or says 0MB?
sent from my mobile device
---------- Post added at 11:53 PM ---------- Previous post was at 11:49 PM ----------
Also fastboot command only work in fastboot mode. ADB commands only work in recovery or when you are booted in OS. ADB does not work in fastboot mode, and fastboot command does not work in recovery or booted OS
sent from my mobile device
Click to expand...
Click to collapse
Bootloader is unlocked. I got rid of TWRP at the suggestion of another member in a different thread regarding a similar problem. So, now I have CWM recovery.
DJ_Caibel said:
Bootloader is unlocked. I got rid of TWRP at the suggestion of another member in a different thread regarding a similar problem. So, now I have CWM recovery.
Click to expand...
Click to collapse
Like @SaHiLzZ said, post your ''fastboot getvar all''
Maybe you could simply start over with a fresh install of the latest dev edition ruu from htcdev.
alray said:
Like @SaHiLzZ said, post your ''fastboot getvar all''
Maybe you could simply start over with a fresh install of the latest dev edition ruu from htcdev.
Click to expand...
Click to collapse
Yeah, that sounds like the best option at this point. Now, to get the correct RUU. My phone is OS 3.17.502.3 with Radio 4T.20.3218.13 and I found an AT&T (Cingular) RUU with the correct OS, but an older radio.
alray said:
Like @SaHiLzZ said, post your ''fastboot getvar all''
Maybe you could simply start over with a fresh install of the latest dev edition ruu from htcdev.
Click to expand...
Click to collapse
c:\adb>fastboot getvar all
INFOversion: 0.5
INFOversion-bootloader: 1.55.0000
INFOversion-baseband: 4T.20.3218.13
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 3.17.502.3
INFOversion-misc: PVT SHIP S-OFF
INFOserialno: XXXXXXXXXXXX
INFOimei: XXXXXXXXXXXXXX
INFOmeid: 00000000000000
INFOproduct: m7_ul
INFOplatform: HBOOT-8064
INFOmodelid: PN0712000
INFOcidnum: 11111111
INFObattery-status: good
INFObattery-voltage: 4284mV
INFOpartition-layout: Generic
INFOsecurity: off
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: dirty-2da61e5e88
INFOhbootpreupdate: 11
INFOgencheckpt: 0
all: Done!
finished. total time: 0.076s
You might want to edit your post and cover your imei bro
Sent from my HTC One using xda app-developers app
Htc one no os
Hi there everyone. I am really hoping for a proper solution here.
So the deal is.
I have got a HTC ONE used. It is provider locked on Dutch vodafone. Had really no problems until one night when I did an update and in the morning I woke up with a phone without OS. Now I already tried almost everything. Tried to push on a rom image through adb but the phone is not connected to the PC. I've been looking on all the forums but neighter the suggestions work. If anyone could have any idea, it would be a lot of help
Details
***Tampered***
***Unlocked***
M7_UL PVT SHIP S-ON RH
HBOOT-1.55.0000
RADIO-4A.21.3263.04
OpenDSP-v32.120.274.0909
OS-3.62.401.1
eMMC-boot 2048MB
Oct 17 2013,23:06:14.0
I've tried fastboot usb but stil not getting connection with pc.
I really need help here.
Thanks.
fekeshazi said:
Hi there everyone. I am really hoping for a proper solution here.
So the deal is.
I have got a HTC ONE used. It is provider locked on Dutch vodafone. Had really no problems until one night when I did an update and in the morning I woke up with a phone without OS. Now I already tried almost everything. Tried to push on a rom image through adb but the phone is not connected to the PC. I've been looking on all the forums but neighter the suggestions work. If anyone could have any idea, it would be a lot of help
Details
***Tampered***
***Unlocked***
M7_UL PVT SHIP S-ON RH
HBOOT-1.55.0000
RADIO-4A.21.3263.04
OpenDSP-v32.120.274.0909
OS-3.62.401.1
eMMC-boot 2048MB
Oct 17 2013,23:06:14.0
I've tried fastboot usb but stil not getting connection with pc.
I really need help here.
Thanks.
Click to expand...
Click to collapse
Please start your own thread and post your ''fastboot getvar all'' minus your IMEI/SN. It will be confusing for the OP if we help you here.
---------- Post added at 11:39 AM ---------- Previous post was at 11:29 AM ----------
DJ_Caibel said:
c:\adb>fastboot getvar all
INFOversion: 0.5
INFOversion-bootloader: 1.55.0000
INFOversion-baseband: 4T.20.3218.13
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 3.17.502.3
INFOversion-misc: PVT SHIP S-OFF
INFOserialno:
INFOimei:
INFOmeid: 00000000000000
INFOproduct: m7_ul
INFOplatform: HBOOT-8064
INFOmodelid: PN0712000
INFOcidnum: 11111111
INFObattery-status: good
INFObattery-voltage: 4284mV
INFOpartition-layout: Generic
INFOsecurity: off
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: dirty-2da61e5e88
INFOhbootpreupdate: 11
INFOgencheckpt: 0
all: Done!
finished. total time: 0.076s
Click to expand...
Click to collapse
Remove your IMEI and SERIALNO from the above post!
Stay S-OFF and don't relock bootloader.
download latest dev edition RUU.zip an save it to your abd/fastboot folder
change your CID back to BS_US001:
boot your phone in bootloader mode / fastboot usb mode and open your cmd prompt
Code:
fastboot oem writecid BS_US001
fastboot reboot-bootloader
reboot your phone in RUU mode:
Code:
fastboot oem rebootRUU
When you see the black screen with the HTC logo, flash the ruu:
Code:
fastboot flash zip <name_of_file>.zip
fastboot flash zip <name_of_file>.zip <----- flash twice!
fastboot reboot
"Please start your own thread and post your ''fastboot getvar all'' minus your IMEI/SN. It will be confusing for the OP if we help you here."
I think I did but cant find my own thred.
The problem is that the phone is still not recognised.The command prompt sits on waiting for device for an hour now.
fekeshazi said:
I think I did but cant find my own thred.
Click to expand...
Click to collapse
no: http://forum.xda-developers.com/search.php?searchid=260253068
go ahead and start one, then mention me in your thread using @alray
Thanks for the help everyone. I was able to flash a RUU and get it booted. Thanks again!

I can not return to official rom

hi guys
first excuse me for bad English and second, for being so dumb
I will summarize to save time
I decided to use a rom cyanogen on my device
only I did not have proper care and did not do the backup security official rom
Now I want to go back to stock version
tried several guides the internet and none helped me, always returns me errors
I have written official recovery, and locked the bootloader
I can not find RUU.exe for my version
Here is what I did and the mistakes returns?
C: \ Fastboot> fastboot getvar all
INFOversion: 0.5
INFOversion-bootloader: 1.57.0000
INFOversion-baseband: 4T.28.3218.04
INFOversion-cpld: None
INFOversion-microprocessor: None
INFOversion-main: 6.15.599.101
INFOversion-misc: PVT SHIP S-ON
INFOmeid: 00000000000000
Infoproduct: m7_u
INFOplatform: HBOOT-8064
INFOmodelid: PN0711000
INFOcidnum: HTC__332
INFObattery-status: good
INFObattery-voltage: 3858mV
INFOpartition-layout: Generic
Infosecurity: on
INFObuild-mode: SHIP
INFOboot-mode: fastboot
INFOcommitno-bootloader: dirty-6d8a0b9b
INFOhbootpreupdate: 11
INFOgencheckpt: 0
all: Done!
finished. Total time: 0.050s
I used this same version as of this writing al 6.15.599.101, and was not, the bootloader this relocked and the recovery this the 4.4.3_stock-recovery works ... and enter the official recovery the it was before, and even Then relocked the error I have not found the RUU.exe to this version, most believe TBM would not work because the fastboot already given Beheerder error ..... I tried to write que way, Then I downloaded the official rom here http: // www .htcdev.co ... r / downloads / P75 notice, is the seventh rom from top to bottom, exactly q is described on my device,
One M7
HTC LA SPA (ES) MR 1424 3.4.10 v4.4.3
6.15.599.101
after downloading, the renamed file to rom and put in fo fastboot folder, casette The Following command:
C: \ Fastboot> fastboot oem rebootRUU
... INFOStart Verify: 3
OKAY [0.031s]
finished. Total time: 0.033s
C: \ Fastboot> fastboot flash zip rom.zip
sending 'zip' (433842 KB) ... OKAY [38.841s]
writing 'zip' ... INFOsignature checking ...
FAILED (remote: 12 signature verify fail)
finished. Total time: 84.695s
with the unlock bootloader of this msg When trying to flash:
C: \ Fastboot> fastboot flash zip rom.zip
sending 'zip' (433842 KB) ... OKAY [39.89
writing 'zip' ... InfoZip head
InfoZip info parsing ...
INFORead zipped android_info fail
FAILED (remote: 24 parsing android-info fail)
finished. Total time: 40.131s
sorry to bother
If anyone knows help me I will be very grateful :good:
Steel-Cleiton said:
hi guys
first excuse me for bad English and second, for being so dumb
I will summarize to save time
I decided to use a rom cyanogen on my device
only I did not have proper care and did not do the backup security official rom
Now I want to go back to stock version
tried several guides the internet and none helped me, always returns me errors
I have written official recovery, and locked the bootloader
I can not find RUU.exe for my version
Here is what I did and the mistakes returns?
C: \ Fastboot> fastboot getvar all
INFOversion: 0.5
INFOversion-bootloader: 1.57.0000
INFOversion-baseband: 4T.28.3218.04
INFOversion-cpld: None
INFOversion-microprocessor: None
INFOversion-main: 6.15.599.101
INFOversion-misc: PVT SHIP S-ON
INFOmeid: 00000000000000
Infoproduct: m7_u
INFOplatform: HBOOT-8064
INFOmodelid: PN0711000
INFOcidnum: HTC__332
INFObattery-status: good
INFObattery-voltage: 3858mV
INFOpartition-layout: Generic
Infosecurity: on
INFObuild-mode: SHIP
INFOboot-mode: fastboot
INFOcommitno-bootloader: dirty-6d8a0b9b
INFOhbootpreupdate: 11
INFOgencheckpt: 0
all: Done!
finished. Total time: 0.050s
I used this same version as of this writing al 6.15.599.101, and was not, the bootloader this relocked and the recovery this the 4.4.3_stock-recovery works ... and enter the official recovery the it was before, and even Then relocked the error I have not found the RUU.exe to this version, most believe TBM would not work because the fastboot already given Beheerder error ..... I tried to write que way, Then I downloaded the official rom here http: // www .htcdev.co ... r / downloads / P75 notice, is the seventh rom from top to bottom, exactly q is described on my device,
One M7
HTC LA SPA (ES) MR 1424 3.4.10 v4.4.3
6.15.599.101
after downloading, the renamed file to rom and put in fo fastboot folder, casette The Following command:
C: \ Fastboot> fastboot oem rebootRUU
... INFOStart Verify: 3
OKAY [0.031s]
finished. Total time: 0.033s
C: \ Fastboot> fastboot flash zip rom.zip
sending 'zip' (433842 KB) ... OKAY [38.841s]
writing 'zip' ... INFOsignature checking ...
FAILED (remote: 12 signature verify fail)
finished. Total time: 84.695s
with the unlock bootloader of this msg When trying to flash:
C: \ Fastboot> fastboot flash zip rom.zip
sending 'zip' (433842 KB) ... OKAY [39.89
writing 'zip' ... InfoZip head
InfoZip info parsing ...
INFORead zipped android_info fail
FAILED (remote: 24 parsing android-info fail)
finished. Total time: 40.131s
sorry to bother
If anyone knows help me I will be very grateful :good:
Click to expand...
Click to collapse
Sorry, I can't understand everything you said but first edit your first post and remove your IMEI and SERIALNO. Dont post these number ever, you want to keep these numbers for yourself.
There is no ruu for .599 version neither any stock rom. The file you are trying to flash is not a ruu/rom, its a kernel source and its not useful for your situation.
You can use custom roms, or you will need to achieve s-off to change your CID/MID and use another ruu version like the .401 version or the .1540 version.
alray said:
Sorry, I can't understand everything you said but first edit your first post and remove your IMEI and SERIALNO. Dont post these number ever, you want to keep these numbers for yourself.
There is no ruu for .599 version neither any stock rom. The file you are trying to flash is not a ruu/rom, its a kernel source and its not useful for your situation.
You can use custom roms, or you will need to achieve s-off to change your CID/MID and use another ruu version like the .401 version or the .1540 version.
Click to expand...
Click to collapse
thanks for your response man
I edited and the first post as requested
I now understand that I can not go back to version 599 stock
if I use another CID / MID will be able to receive OTA updates in the future?
anyway I can not go back to version 599, I will have to use another stock like you said
you could teach me how to make changes, to use another version rom stock?
sorry for bad English
Steel-Cleiton said:
if I use another CID / MID will be able to receive OTA updates in the future?
Click to expand...
Click to collapse
Yes
you could teach me how to make changes, to use another version rom stock?
Click to expand...
Click to collapse
Flash a close to stock rom (needed to achieve s-off)
achieve s-off using sunshine (will cost you 25$)
change your CID to BS_US001
Code:
fastboot oem writecid BS_US001
change your MID to PN0712000 using the MID change tool in custom recovery
flash the 6.07.1540.2 RUU.
alray said:
Yes
Flash a close to stock rom (needed to achieve s-off)
achieve s-off using sunshine (will cost you 25$)
change your CID to BS_US001
Code:
fastboot oem writecid BS_US001
change your MID to PN0712000 using the MID change tool in custom recovery
flash the 6.07.1540.2 RUU.
Click to expand...
Click to collapse
let's see if I understand
sunshine is a paid program ?
is this site I'll download it http://theroot.ninja/download.html
he is a .apk?
I will install on HTC and runs it?
I understand the rest of what you said
only on the sunshine did not quite understand how to make
Thx and sorry my bad english
Steel-Cleiton said:
let's see if I understand
sunshine is a paid program ?
is this site I'll download it http://theroot.ninja/download.html
he is a .apk?
I will install on HTC and runs it?
I understand the rest of what you said
only on the sunshine did not quite understand how to make
Thx and sorry my bad english
Click to expand...
Click to collapse
Yes sunshine is a paid app to achieve s-off. Sunshine is the only method to s-off HTC One on Hboot 1.57. This app must be used on a close to stock rom to work correctly. Before charging you the 25$ (via paypal) the app will run some tests to make sure s-off is possible so you will not pay anything if s-off is not achieved.
alray said:
Yes sunshine is a paid app to achieve s-off. Sunshine is the only method to s-off HTC One on Hboot 1.57. This app must be used on a close to stock rom to work correctly. Before charging you the 25$ (via paypal) the app will run some tests to make sure s-off is possible so you will not pay anything if s-off is not achieved.
Click to expand...
Click to collapse
ok I've downloaded the sunshine .apk
I can install it without problems
only that I get the following msg when I run the software:
your device has debuggable rmdisk (ro debuggable=1). you need to flash a non-debuggable boo.img stock would be best
another question noob
I live in Brazil
this CID will work all operators?
4g will work as before?
there is some CID running all operators?
If the answer is yes, I will continue to receive OTA update?
I mean if I install a CID for all operators
Steel-Cleiton said:
ok I've downloaded the sunshine .apk
I can install it without problems
only that I get the following msg when I run the software:
your device has debuggable rmdisk (ro debuggable=1). you need to flash a non-debuggable boo.img stock would be best
Click to expand...
Click to collapse
Flash a stock rom!
this one should work fine
another question noob
I live in Brazil
this CID will work all operators?
4g will work as before?
there is some CID running all operators?
If the answer is yes, I will continue to receive OTA update?
I mean if I install a CID for all operators
Click to expand...
Click to collapse
4G will work fine as before (no LTE).
BS_US001 is the dev edition cid so you'll get ota updates everywhere.
alray said:
Flash a stock rom!
4G will work fine as before (no LTE).
BS_US001 is the dev edition cid so you'll get ota updates everywhere.
Click to expand...
Click to collapse
Now I was confused, sorry my ignorance
I ask a little patience I'm understanding gradually
every time I tried to flash a rom received errors
how do I write this rom you posted?
I use fastboot or TWRP for this?
need to write the official recovery and lock the bootloader?
I'm already very grateful to you man
I tried a lot of help throughout internet
and only you so far helped me
thank you for the patience that is having me
Steel-Cleiton said:
Now I was confused, sorry my ignorance
I ask a little patience I'm understanding gradually
every time I tried to flash a rom received errors
how do I write this rom you posted?
I use fastboot or TWRP for this?
need to write the official recovery and lock the bootloader?
I'm already very grateful to you man
I tried a lot of help throughout internet
and only you so far helped me
thank you for the patience that is having me
Click to expand...
Click to collapse
no don't lock the bootloader and don't flash the stock recovery. Just copy the rom to your phone storage and flash in using twrp recovery.
alray said:
no don't lock the bootloader and don't flash the stock recovery. Just copy the rom to your phone storage and flash in using twrp recovery.
Click to expand...
Click to collapse
I'll try when I get home
I'm at work now, get out of here one hour
thanks a lot:good:
alray said:
no don't lock the bootloader and don't flash the stock recovery. Just copy the rom to your phone storage and flash in using twrp recovery.
Click to expand...
Click to collapse
uhuuuuuuuuuuuuuu
worked my friend
now a question
this is a rom stock?
or is a developer rom?
the CID needs to be changed to match the version of the rom, just so I can receive OTA?
if I do not change CID and continue using this rom version, I can receive OTA update?
there is some rom stock lollipop version?
thank you my friend
I warmly thank for your patience
Steel-Cleiton said:
uhuuuuuuuuuuuuuu
worked my friend
now a question
this is a rom stock?
or is a developer rom?
the CID needs to be changed to match the version of the rom, just so I can receive OTA?
if I do not change CID and continue using this rom version, I can receive OTA update?
there is some rom stock lollipop version?
thank you my friend
I warmly thank for your patience
Click to expand...
Click to collapse
If you have achieved S-OFF then follow the steps alray posted here starting with Step 3. When you complete the steps successfully your phone will be a DevEd on the last version waiting for the Lollipop OTA.
majmoz said:
If you have achieved S-OFF then follow the steps alray posted here starting with Step 3. When you complete the steps successfully your phone will be a DevEd on the last version waiting for the Lollipop OTA.
Click to expand...
Click to collapse
yes I did all the steps
not only posted yesterday because it was late
Alray was my master
I owe much to him
alray said:
no don't lock the bootloader and don't flash the stock recovery. Just copy the rom to your phone storage and flash in using twrp recovery.
Click to expand...
Click to collapse
hello my good friend
I learned what you taught me
was complicated by I do not have a good English
more I got it, thanks for your patience
look:
before:
C: \ Fastboot> fastboot getvar all
INFOversion: 0.5
INFOversion-bootloader: 1.57.0000
INFOversion-baseband: 4T.28.3218.04
INFOversion-cpld: None
INFOversion-microprocessor: None
INFOversion-main: 6.15.599.101
INFOversion-misc: PVT SHIP S-ON
INFOmeid: 00000000000000
Infoproduct: m7_u
INFOplatform: HBOOT-8064
INFOmodelid: PN0711000
INFOcidnum: HTC__332
INFObattery-status: good
INFObattery-voltage: 3858mV
INFOpartition-layout: Generic
Infosecurity: on
INFObuild-mode: SHIP
INFOboot-mode: fastboot
INFOcommitno-bootloader: dirty-6d8a0b9b
INFOhbootpreupdate: 11
INFOgencheckpt: 0
all: Done!
finished. Total time: 0.050s
now:
C:\Fastboot>fastboot getvar all
INFOversion: 0.5
INFOversion-bootloader: 1.57.0000
INFOversion-baseband: 4T.28.3218.04
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 6.07.1540.2
INFOversion-misc: PVT SHIP S-OFF
INFOserialno
INFOimei:
INFOmeid: 00000000000000
INFOproduct: m7_u
INFOplatform: HBOOT-8064
INFOmodelid: PN0712000
INFOcidnum: BS_US001
INFObattery-status: good
INFObattery-voltage: 4271mV
INFOpartition-layout: Generic
INFOsecurity: off
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: dirty-6d8a0b9
INFOhbootpreupdate: 11
INFOgencheckpt: 0
all: Done!
finished. total time: 0.074s
this all right?
now can receive future OTA updates?
Steel-Cleiton said:
hello my good friend
I learned what you taught me
was complicated by I do not have a good English
more I got it, thanks for your patience
look:
before:
C: \ Fastboot> fastboot getvar all
INFOversion: 0.5
INFOversion-bootloader: 1.57.0000
INFOversion-baseband: 4T.28.3218.04
INFOversion-cpld: None
INFOversion-microprocessor: None
INFOversion-main: 6.15.599.101
INFOversion-misc: PVT SHIP S-ON
INFOmeid: 00000000000000
Infoproduct: m7_u
INFOplatform: HBOOT-8064
INFOmodelid: PN0711000
INFOcidnum: HTC__332
INFObattery-status: good
INFObattery-voltage: 3858mV
INFOpartition-layout: Generic
Infosecurity: on
INFObuild-mode: SHIP
INFOboot-mode: fastboot
INFOcommitno-bootloader: dirty-6d8a0b9b
INFOhbootpreupdate: 11
INFOgencheckpt: 0
all: Done!
finished. Total time: 0.050s
now:
C:\Fastboot>fastboot getvar all
INFOversion: 0.5
INFOversion-bootloader: 1.57.0000
INFOversion-baseband: 4T.28.3218.04
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 6.07.1540.2
INFOversion-misc: PVT SHIP S-OFF
INFOserialno
INFOimei:
INFOmeid: 00000000000000
INFOproduct: m7_u
INFOplatform: HBOOT-8064
INFOmodelid: PN0712000
INFOcidnum: BS_US001
INFObattery-status: good
INFObattery-voltage: 4271mV
INFOpartition-layout: Generic
INFOsecurity: off
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: dirty-6d8a0b9
INFOhbootpreupdate: 11
INFOgencheckpt: 0
all: Done!
finished. total time: 0.074s
this all right?
now can receive future OTA updates?
Click to expand...
Click to collapse
Yes its all good, glad it worked :good:
alray said:
Yes its all good, glad it worked :good:
Click to expand...
Click to collapse
I know not how to thank you
I admire your dedication and patience
I will continue to follow this forum
I have a lot to learn here
thanks again Alray
alray said:
Yes its all good, glad it worked :good:
Click to expand...
Click to collapse
I have just received OTA lollipop
thank you again
so I pay my credit card, I will make a donation to you friend
I need some help, my phone has the same software number.
I tried to change the MID using this post as reference: http://forum.xda-developers.com/showthread.php?t=2322820
I get the gray screen, but when I try to run the RUU software I'm having error 170, phone is not connected.
The software just ask me to press finish to close the program, and don't install the rom.
How to solve this error 170?

Htc one m7 single sim help me please

I have a htc one m7 single sim mobile..... I have twrp.. I tried to install miui on my mobile and the mobile bricked... Afetr a long try i am able to install a rom and its working... But no network.. *#06# no information....no imei... I am not aware of this rom karnels etc etc... I think its sprint version... Please help me to install the proper rom ... I want online solution ..any kind hearted man please help me....
dipankar.c2bs said:
I have a htc one m7 single sim mobile..... I have twrp.. I tried to install miui on my mobile and the mobile bricked... Afetr a long try i am able to install a rom and its working... But no network.. *#06# no information....no imei... I am not aware of this rom karnels etc etc... I think its sprint version... Please help me to install the proper rom ... I want online solution ..any kind hearted man please help me....
Click to expand...
Click to collapse
You should try a RUU...
Post the output of "fastboot getvar all" (remove imei and sn before posting)
i have done your suggestion
alray said:
You should try a RUU...
Post the output of "fastboot getvar all" (remove imei and sn before posting)
Click to expand...
Click to collapse
here it is respected sir
D:\Softwares\Fastboot>fastboot getvar all
INFOversion: 0.5
INFOversion-bootloader: 1.57.0000
INFOversion-baseband: N/A
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 5.05.651.2
INFOversion-misc: PVT SHIP S-OFF
INFOserialno:
INFOimei:
INFOmeid:
INFOproduct: m7_wls
INFOplatform: HBOOT-8064
INFOmodelid: PN0720000
INFOcidnum: 11111111
INFObattery-status: good
INFObattery-voltage: 3714mV
INFOpartition-layout: Generic
INFOsecurity: off
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: dirty-0e1af350
INFOhbootpreupdate: 11
INFOgencheckpt: 0
all: Done!
finished. total time: 0.074s
D:\Softwares\Fastboot>
dipankar.c2bs said:
here it is respected sir
D:\Softwares\Fastboot>fastboot getvar all
INFOversion: 0.5
INFOversion-bootloader: 1.57.0000
INFOversion-baseband: N/A
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 5.05.651.2
INFOversion-misc: PVT SHIP S-OFF
INFOserialno:
INFOimei:
INFOmeid:
INFOproduct: m7_wls
INFOplatform: HBOOT-8064
INFOmodelid: PN0720000
INFOcidnum: 11111111
INFObattery-status: good
INFObattery-voltage: 3714mV
INFOpartition-layout: Generic
INFOsecurity: off
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: dirty-0e1af350
INFOhbootpreupdate: 11
INFOgencheckpt: 0
all: Done!
finished. total time: 0.074s
D:\Softwares\Fastboot>
Click to expand...
Click to collapse
Is MIUI compatible for the Sprint variant of the M7? I don't think...probably only with the gsm variant (to confirm).
Flashing the 6.23.651.10 RUU should fix your phone.
http://www.htc.com/us/support/htc-one-sprint/news/
Sir i am not a expert... I was tensed and i followed xda and youtube.. Now my situation is bad.. Can you please te me the process??? I have computer... Can you tell. Me the process please..
alray said:
Is MIUI compatible for the Sprint variant of the M7? I don't think...probably only with the gsm variant (to confirm).
Flashing the 6.23.651.10 RUU should fic your phone.
http://www.htc.com/us/support/htc-one-sprint/news/
Click to expand...
Click to collapse
sir i dont need miui.... please help me so that i can get the mobile in working.... i have downloaded the link.... please make my phone like ptrevious htc rom
dipankar.c2bs said:
sir i dont need miui....
Click to expand...
Click to collapse
I know, what I was saying is that your phone most likely bricked simply because its not compatible with MUI. Always check if the rom you want to flash is compatible with your variant.
please help me so that i can get the mobile in working.... i have downloaded the link.... please make my phone like ptrevious htc rom
Click to expand...
Click to collapse
Follow instructions provided in my previous post (see link).
alray said:
I know, what I was saying is that your phone most likely bricked simply because its not compatible with MUI. Always check if the rom you want to flash is compatible with your variant.
Follow instructions provided in my previous post (see link).
Click to expand...
Click to collapse
respected sir, i have downloaded RUU_M7_WL_L50_SENSE60_SPCS_MR_Sprint_WWE_6.23.651.10 exe file.... tried to run as admistation but nothing happening.... any other process?
dipankar.c2bs said:
respected sir, i have downloaded RUU_M7_WL_L50_SENSE60_SPCS_MR_Sprint_WWE_6.23.651.10 exe file.... tried to run as admistation but nothing happening.... any other process?
Click to expand...
Click to collapse
Do you have the MS Visual C++ redistributable package installed on your computer? It's required for the ruu to work correctly. If not download and install it (from Microsoft website). If it's still not working after that then you could try a ruu.zip
Sent from my HTC One using XDA Labs
i tried to find ruu zip file but i failed to search...
sir is it possible for u to control my pc with team viwer??? then i will install it
ms c++ installed
dipankar.c2bs said:
i tried to find ruu zip file but i failed to search...
Click to expand...
Click to collapse
Nvm
Sent from my HTC One using XDA Labs
---------- Post added at 01:29 PM ---------- Previous post was at 01:24 PM ----------
How long did you waited after launching the ruu.exe? On my computer it can take a few minutes before the ruu program starts...
Sent from my HTC One using XDA Labs
alray said:
Nvm
Sent from my HTC One using XDA Labs
---------- Post added at 01:29 PM ---------- Previous post was at 01:24 PM ----------
How long did you waited after launching the ruu.exe? On my computer it can take a few minutes before the ruu program starts...
Sent from my HTC One using XDA Labs
Click to expand...
Click to collapse
sir waited for more than 1 hour
where can i get ruu zip file sir??? and c++ is installed on my computer.. i have checked
dipankar.c2bs said:
where can i get ruu zip file sir???
Click to expand...
Click to collapse
I'm currently uploading it for you, I'll give you the link when its ready.
Btw no PM please. Sending me PM will not make me answer faster. Like said in my signature, I will only answer when I have the time
And no need to use "sir" with me
Here is the link for the 6.23.651.10 ruu.zip
https://www.androidfilehost.com/?fid=24588232905725176
Don't forget to flash it using htc_fastboot like explained here
i am downloading the file... its 1.5 gb... and u know the speed of indian net thank you so much for helping me.. as soon as the download completed i will inform u the status
alray said:
here is the link for the 6.23.651.10 ruu.zip
https://www.androidfilehost.com/?fid=24588232905725176
don't forget to flash it using htc_fastboot like explained here
Click to expand...
Click to collapse
omg...sir where are you? I ant to thnk you so much for solving my issue... Now my mobile is working with htc rom ..i did it by your istructions... Also getting network... Thank you very much sir... Thank you thank you thank you
dipankar.c2bs said:
omg...sir where are you? I ant to thnk you so much for solving my issue... Now my mobile is working with htc rom ..i did it by your istructions... Also getting network... Thank you very much sir... Thank you thank you thank you
Click to expand...
Click to collapse
you are really a genius... Thank you very much.... Now i am rooting my mobile so that i can install twrp..... Is there any problem if i root and install twrp?

Categories

Resources