Related
Hi everybody,
I had a problem with my WM6 when I tried to surf via GPRS. The connection went fine but the requested pages would not load. After a lot of posting and research I found out that the pocket IE included in the WM6 rom only opens
url's when they start like this:
wsp://www.google.com
This is a real pain in the a** because when you click a search result in google it'll link ya to an http://... site and the problem starts again!
I live in germany and I use the O2 WAP Flatrate and up until the WM6 rom I had no issue.
Does anybody have a fix for this maybe a registry tweak that tells the pocket IE to behave as in the previous rom's?
I know a few of you out there got the same problem and I hope this thread will help us enjoy this great rom because everything else is just perfect for my needs!
Thank you and I am looking forward to your suggestions!
Cheers
FREIMAURER
FREIMAURER said:
Hi everybody,
I had a problem with my WM6 when I tried to surf via GPRS. The connection went fine but the requested pages would not load. After a lot of posting and research I found out that the pocket IE included in the WM6 rom only opens
url's when they start like this:
wsp://www.google.com
This is a real pain in the a** because when you click a search result in google it'll link ya to an http://... site and the problem starts again!
I live in germany and I use the O2 WAP Flatrate and up until the WM6 rom I had no issue.
Does anybody have a fix for this maybe a registry tweak that tells the pocket IE to behave as in the previous rom's?
I know a few of you out there got the same problem and I hope this thread will help us enjoy this great rom because everything else is just perfect for my needs!
Thank you and I am looking forward to your suggestions!
Cheers
FREIMAURER
Click to expand...
Click to collapse
I can assure you that PIE in WM6 opens http:// addresses too. I haven't tried connecting through GPRS, though. Only WiFi.
Maybe it's a DNS problem?
Hi Risidoro,
which WM6 are you using? I use the PDAVIET3 and I had the same issue with
the PDAVIET1.
DNS sounds good but it worked on the previous roms and I use the same settings as before. Maybe there is some registry entry in the PDAVIET causing
this phenomena!?
Thanks for helping!
im using the Original WM6 rom and im not having 1 problem.. maybe is PDAVIET3 rom.. i have been using PIE on Wifi and GPRS and it always connects
I'm using the BigBrother's rom AKA clean wm6 and i've no problem so far. IE works as always...that is: BAD (but at least it opens http)!
The best browser for WM, the real usable one, is Picsel Browser.
It can't be bought online (picsel only sells it to device manufacturers) but... WM6 couldn't be bought too... if you know what i mean
I do use pdaviet3 and have no problem opening http pages with GPRS in IE.
risidoro said:
The best browser for WM, the real usable one, is Picsel Browser.
It can't be bought online (picsel only sells it to device manufacturers) but... WM6 couldn't be bought too... if you know what i mean
Click to expand...
Click to collapse
Well, I searched for it and found it, will try it, Thanks....
vijovame said:
Well, I searched for it and found it, will try it, Thanks....
Click to expand...
Click to collapse
Is a little weird, but is very good, just don't like how to zoom the pages, I use PIE plus in desktop mode....
Here check your registry and see if it looks anything like this. My browser was acting up and saying that invalid url. so i fixed the settings and now everything works awesome on it. heres the thread http://forum.xda-developers.com/showthread.php?t=291580 . its the last post
vijovame said:
Is a little weird, but is very good, just don't like how to zoom the pages, I use PIE plus in desktop mode....
Click to expand...
Click to collapse
Double clic and move the stylus up or down. It's all explained in the first page that's shown when you start the program.
bye
risidoro said:
Double clic and move the stylus up or down. It's all explained in the first page that's shown when you start the program.
bye
Click to expand...
Click to collapse
Thanks for the tip Risidoro! This really is a GREAT browser!
vijovame said:
Well, I searched for it and found it, will try it, Thanks....
Click to expand...
Click to collapse
any hints as to where to search for it? ive been searching for an hour now and no luck... it seems like a really cool program from all the stuff ive read though lol
FREIMAURER said:
Hi everybody,
I had a problem with my WM6 when I tried to surf via GPRS. The connection went fine but the requested pages would not load. After a lot of posting and research I found out that the pocket IE included in the WM6 rom only opens
url's when they start like this:
wsp://www.google.com
This is a real pain in the a** because when you click a search result in google it'll link ya to an http://... site and the problem starts again!
I live in germany and I use the O2 WAP Flatrate and up until the WM6 rom I had no issue.
Does anybody have a fix for this maybe a registry tweak that tells the pocket IE to behave as in the previous rom's?
I know a few of you out there got the same problem and I hope this thread will help us enjoy this great rom because everything else is just perfect for my needs!
Thank you and I am looking forward to your suggestions!
Cheers
FREIMAURER
Click to expand...
Click to collapse
I think you have bad gprs connection settings, as you wrote you can only open through wsp:// it means you are connecting to WAP service where only connection to internet is through APN (Access Point Name) so you have to use wsp (wireless session protocol). I'm assuming you set up your connections using some cab file, don't you? Go to Settings/Connections/Connections/Manage existing connections and check how many connections you have there if it's only one than it's for shure connection through WAP APN and you have to change it to normal internet connection if there are more than one connections check the proper settings for internet instead 'auto pick' if any of this does't work make your own settings as I can see for German O2 you have to only put APN name 'internet' and nothing else no passwd or login. Hope this info helps you
deviusdragger said:
Here check your registry and see if it looks anything like this. My browser was acting up and saying that invalid url. so i fixed the settings and now everything works awesome on it. heres the thread http://forum.xda-developers.com/showthread.php?t=291580 . its the last post
Click to expand...
Click to collapse
Hi deviusdragger,
tried your help but to no avail. The PDAVIET 3 really has different settings but changing them and rebooting did not really fix the problem.
The keys you are mentioning are only under HKLM did you also change yours there or do you have them under HKCU as well?
Thanks a lot anyway for your help!
shamus said:
I think you have bad gprs connection settings, as you wrote you can only open through wsp:// it means you are connecting to WAP service where only connection to internet is through APN (Access Point Name) so you have to use wsp (wireless session protocol). I'm assuming you set up your connections using some cab file, don't you? Go to Settings/Connections/Connections/Manage existing connections and check how many connections you have there if it's only one than it's for shure connection through WAP APN and you have to change it to normal internet connection if there are more than one connections check the proper settings for internet instead 'auto pick' if any of this does't work make your own settings as I can see for German O2 you have to only put APN name 'internet' and nothing else no passwd or login. Hope this info helps you
Click to expand...
Click to collapse
Hi shamus,
thank you for your reply! No I do not use a cab I perform the settings manually. There is more to it than entering a APN, here is all I do and how
it is documented in the depths of the german O2 website
modem: CELLULAR LINE GPRS
APN: wap.viaginterkom.de
USER/PASSWORD/DOMAIN: empty
PROXY: 195.182.114.52
HTTP: 195.182.114.52:8080
WAP: 195.182.114.52:9201
SECURE WAP: 195.182.114.52:9203
SOCKS: empty
Only by entering these informations I am surfing on the O2 wap flatrate and
by entering the proxy like this I can surf to http sites as well!!!
And exactly this feature seems to have been taken from me
Well not really as I can enter wsp://... I am still able to surf but using
google and hitting search results gets really anoying cause for every search result I will have to change the url from http to wsp !!!!
So if somebody out there might really have the antidote for my prob I'd
be most happy and if not I´ll consider switching back to Farias rom as this
WM6 stuff is only for evaluation
Thanks for helping!
Hmmm seems it's good lead. When your connection is through proxy server in this case 195.182.114.52 then you have to have all connection setup in "my work network" disable "My ISP" in connections/advanced/select networks by choosing only "My work network" in both fields then setup Proxy server and setup only HTTP proxy remember 8080 port, left all other protocols empty (wap, socks, secure wap). Try if it works, if not than try to setup WAP proxy to 8080 port also. Since browser connects all the time to wap apn in this way you can trick it. Other unusual possibility is your provider stoped to serve http proxy or changed some settings.
shamus said:
Hmmm seems it's good lead. When your connection is through proxy server in this case 195.182.114.52 then you have to have all connection setup in "my work network" disable "My ISP" in connections/advanced/select networks by choosing only "My work network" in both fields then setup Proxy server and setup only HTTP proxy remember 8080 port, left all other protocols empty (wap, socks, secure wap). Try if it works, if not than try to setup WAP proxy to 8080 port also. Since browser connects all the time to wap apn in this way you can trick it. Other unusual possibility is your provider stoped to serve http proxy or changed some settings.
Click to expand...
Click to collapse
Hi shamus,
tried all of your ideas but still it did not resolve this issue! I always choose "My work network" because the ISP does not let me set up the proxy.
My provider still features this service because if I use any of the normal WM5 roms everything works perfectly!
Thanks for helping!
PS: this is really starting to pi** me off
FREIMAURER said:
Hi shamus,
tried all of your ideas but still it did not resolve this issue! I always choose "My work network" because the ISP does not let me set up the proxy.
My provider still features this service because if I use any of the normal WM5 roms everything works perfectly!
Thanks for helping!
PS: this is really starting to pi** me off
Click to expand...
Click to collapse
Hey FREIMAURER....we met in another thread......
I had a similar problem...you may have to flash your factory rom just to get your provider network settings. Flash back to your current rom and then use that cab file to set your device up so that your carrier's settings show up in Connections. At this point you can modify the wap address and your proxy settings. This will get you on the internet.
MMS is another beast!
PDAviet3 does not include MMS....you have to install ArcSoft MMS for it to show up on your device. I recommend you install ArcSoft MMS before you install your carrier's settings cab because your carrier settings include MMS configurations but once they are installed...you can not change them. If your MMS works, you're good. If it doesn't, un-install ArcSoft MMS, re-install ArcSoft MMS and manually input your settings.
Sounds like alot of hard work but it's not that bad.
PM me if you need help
Cingular settings
Cingular settings CAB files can be found here:
http://forum.xda-developers.com/showthread.php?t=292245
5th post down
What happened....did everyone give up..?!?!
Hi guys - need some help.
Been following the guide on how to get Vodaphone Live to work on the HTC branded TytnII.
Done the registry editor changes to it now appears to be an Nokia N95... but every time I try to copy the Browsers.dll file across to the windows directory I get a write permissions error.
Any ideas?
Cheers
Tony
Try using Resco Explorer or Total Commander to copy "browser.dll" to \Windows...
I think the built-in file explorer will give you an error, but those two should allow you to copy it over.
kaiserchief said:
Try using Resco Explorer or Total Commander to copy "browser.dll" to \Windows...
I think the built-in file explorer will give you an error, but those two should allow you to copy it over.
Click to expand...
Click to collapse
Thanks you're a Star... Resco explorer worked like a charm...
Vodaphone Live and HTC TytnII.
Hi guys - need some help.
where can i find the guide
to get Vodaphone Live to work on the HTC TytnII.
i am looking for
the registry editor changes needed to work'
nikosroy said:
Hi guys - need some help.
where can i find the guide
to get Vodaphone Live to work on the HTC TytnII.
i am looking for
the registry editor changes needed to work'
Click to expand...
Click to collapse
Hiya this is the guide I used:
http://www.modaco.com/Vodafone-Live-Settings-t259142.html
I tried the settings in the thread Wise1 gave but it didn't work. Has anyone got vodafone live to work on the TyTnII?
Use the cab in here...
It uses the same browser.dll and reg settings as mentioned in the guide, but only takes two seconds (and a soft reset).
Oh, and always remember that you have to connect to the internet via the *WAP* settings before you can get on to Vodafone Live! - you'll get an error if you're connected via the "Internet" settings.
Enjoy!
It Worked!!!!
Thanks Sub69 it worked. I had spent hours trying to get Mobile TV.
Just thought I'd add one note though for those people that download the cab and then expend the Internet browser to work.
Once you have installed the cab go to START, Settings, Connections, then click on Connections icon. Click on Advanced and Select Networks. On programs that automatically connect to the Internet, select Contract WAP from the dropdown menu.
Next goto Internet Exployer and type http://live.vodafone.net. It should then work.
p.s. turn off WiFi as this will stop internet streaming on vodafone live
Thank you for this...
This worked perfectly for me, although I had to enter wsp://live.vodafone.com before it loaded the vodafone live! homepage (http:// at the start didn't work).
Amazing isn't it how Vodafone happily sell Windows Mobile devices but don't support them with Vodafone live and Pocket IE!
Personally, I use: http://live.vodafone.co.uk but as long as it all works, that's the main thing!
And yes, you must be connected via the *WAP* settings otherwise you get a "service is not responding at this time" error.
Bit of a pain that - I've tried all sorts of fiddling with the exception list etc. and I just can't get it to switch connection settings automatically when navigating to the Vodafone pages.
app to devellop...
If a dev guys could write a little apps with two big button to switch to :
* Vodafone Live wap
* Defaut internet
it's would be nice if you can setup within the applic 2 network config something like:
Button1(I):
Internet connect with : ....
Work connect wit : ....
Button 2(WAP):
Internet connect with : ....
Work connect wit : ....
and an option to start PIE to another web page ... with button 2...
Still not working...even with the .cab
Thanks guys...I'm another HTC TYTN ii user and I got all excited reading this thinking I'd finally found the fix (I hate Vodafone for selling me the Vodafonelive/MobileTV package and then not supporting me!!). I've loaded the .cab and followed the instructions for the reset. I'm also using WAP to now try and access the vodafone live sites...but no joy!!! :-( The following errors occur on each respective 'potential' Vodafone live page.
http://live.vodafone.co.uk - Gives me the error message: Bad Gateway - The proxy server received an invalid response from an upstream server. Additionally, a 502 Bad gateway error was encountered while trying to use an ErrorDocument to handle the request.
http://live.vodafone.com - This must timeout in some other way because I get an IE initiated message saying The page cannot be displayed or downloaded because the connection was lost. Check the connection and try again later.
http://live.vodafone.net again an IE initiated message saying The page cannot be found. Check the name and try again.
wsp://live.vodafone.net again an IE initiated message saying The page cannot be found. Check the name and try again.
wsp://live.vodafone.com This must timeout in some other way because I get an IE initiated message saying The page cannot be displayed or downloaded because the connection was lost. check the connection and try again later.
wsp://live.vodafone.co.uk
Can someone please advise if I need to do anything else...or can you think of anything else that I can try???
By the way...I do at least get the EXCEPTIONS working out in Connections...By inputting the above sites into EXCEPTIONS, they do connect over WAP rather than IS(3G).
Pleeeeeease help! Cheers.
The cause is just your tricks to use exception...! Don't try to use it, even if it connect right...do a manual connect you will see the difference
I got those sorts of error messages when I was trying to work out how to use the exception list too. Very long "loading" times, followed by IE timeout errors.
Should work fine if you set your connections so that the "Programs that automatically connect to the Internet" are using the "Contract WAP" settings...
Same here?!
Deepdivedog1 said:
Thanks guys...I'm another HTC TYTN ii user and I got all excited reading this thinking I'd finally found the fix (I hate Vodafone for selling me the Vodafonelive/MobileTV package and then not supporting me!!). I've loaded the .cab and followed the instructions for the reset. I'm also using WAP to now try and access the vodafone live sites...but no joy!!! :-( The following errors occur on each respective 'potential' Vodafone live page.
http://live.vodafone.co.uk - Gives me the error message: Bad Gateway - The proxy server received an invalid response from an upstream server. Additionally, a 502 Bad gateway error was encountered while trying to use an ErrorDocument to handle the request.
http://live.vodafone.com - This must timeout in some other way because I get an IE initiated message saying The page cannot be displayed or downloaded because the connection was lost. Check the connection and try again later.
http://live.vodafone.net again an IE initiated message saying The page cannot be found. Check the name and try again.
wsp://live.vodafone.net again an IE initiated message saying The page cannot be found. Check the name and try again.
wsp://live.vodafone.com This must timeout in some other way because I get an IE initiated message saying The page cannot be displayed or downloaded because the connection was lost. check the connection and try again later.
wsp://live.vodafone.co.uk
Can someone please advise if I need to do anything else...or can you think of anything else that I can try???
By the way...I do at least get the EXCEPTIONS working out in Connections...By inputting the above sites into EXCEPTIONS, they do connect over WAP rather than IS(3G).
Pleeeeeease help! Cheers.
Click to expand...
Click to collapse
Same here?! Kaiser (Vario III) with Dutty´s Kaiser Final 2 (TouchFlo). Running fine.
What happened:
Try to establish internet connection. "wap.vodafone.de" (without Proxy)
- Vodafone Mail works fine (POP)
- IE (only http://www.vodafone.de) works fine
- Every other page (also wsp://live.vodafone.de) The page cannot be found. Check the name and try again.
Add Proxy 139.007.029.001 like it is written in some "Threads":
- Vodafone Mail --> did not work any longer. Sync error (Could not establish connection)
- No IE connection is possible.
Any idea?
Thanks. Bye.
Reversing the Vodafone cab file
Hi Sub69
I have been able to use Vodafone Live TV fine on my TyTn II for sometime but recently I wanted to look on a site that won't work as it said that my phone had been detected as a Symbian S60 unit and wanted me to download a .sis file which obviously won't work on the TyTn II. Have you got a cab file that does the reverse of the vodafone Live cab file and reverts the TyTn back to a WM6 device as far as some programs are concerned. I will then be able to toggle between the 2 as and when I need to.
Thanks
Folks,
Used to have a HTC Universal (Vodafone v1640) that I never got working with Vodafone Live in the UK. Now have a v1615 (Kaiser) and wondering if this device can be made to work and access Vodafone Live.
I'm fairly technically literate (though not an expert!) and have to admit to getting a touch lost on a couple of things I've read on various websites. Not to sure how to change registry settings on my machine, but no probs learning, and very familiar with all the standard wap settings etc required.
My v1640 used to just hang if i pointed it to "www.live.vodafone.com", my Kaiser will now access the site but gives the following error in Explorer:
"Unable to determine IP address from host name for www.live.vodafone.com
The dnsserver returned:
Name error: The domain name does not exist.
This means that:
The cache was not able to resolve the hostname presented in the URL. Check if the address is correct"
I never got this error message on the 1640 - it just sat there and did nothing. So i'm wondering if this is any further progress or not? Or are these HTC devices (as Vodafone confirmed today) just not meant to connect to Live without serious tweaking.
I am more than happy to have a hack at my machine but am slightly lost at where to start here in order to achieve this on my brand new device for which there still doesn't seem to be much info.
Have Vodafone got this device almost ready to access Live? Or is one of the posts i've seen somewhere just a fantasy?!
All I really need is just a basic guide going through it with this new device.
Can't believe Vodafone don't have this working in the first place...
Thanks.
Isn't it live.vodafone.com rather than www.live.vodafone.com?
yes, and you need some proxy settings as well to use it. the only way I got Live.vodafone.com to work was by adding it as a modem connection under my work network if you are looking to use it as a data plan only and it will only work with EAS and PIE, no VOIP or messenger will work. As for using the vodafone live site, you need to change some regkey settings that will fool the the vodafone proxy to think that you have an approved handset for vodafone live, you should find examples in this forum if you search around, I think Modaco also has some entries on this. Bottom line is that Vodafone never intended to let it be used with PPC, because once they loose that control they cannot sell their services, advertise etc which is why it's a relatively useless solution for anyone who use their offer of 500 MB for 10 Eur or something along those lines.
Cheers
LBN
Thanks guys. Yes - it is just live.vodafone.com - was too busy with work...
Ok, starting to get an idea of what needs to be done. Have seen so many posts on various websites that I wasn't quite sure where to start.
I'm guessing that changing the regkey settings is the first thing to try then? Is there an easy to use registry tweaking tool?
Been messing around for a while now and nothing I do seems to make any difference!
I've tried all kinds of different Reg Key settings, every combination of wap and internet access points, and nothing seems to change anything.
Basically no matter what i enter, (either wsp://live.vodafone.com or http://live.vodafone.com) it only connects through a wap connection, and it only brings up a very basic vodafoneLive series of text based web pages with no access to anything interesting.
Do WM6 devices such as mine have different Reg Key settings / areas that need modifying? I'm surprised that putting Nokia settings in, or any other setting has no effect at all!
Anyone??
The vodafone live portal requires a "template" to be present at the vodafone end which defines which screen size and content the device can handle. Unless Vodafone have created one for the v1615, you will need to alter the useragent to look like a device which does have a template...
Without a devices presenting its self as a supported device, you will not be able to access live services.
Why not look at the user agent of the Treo 500v? That is the frist real consumer WM device which has the ability to view the live portal.
Gotcha. Makes sense, thanks for the tip.
Any idea where to find details of a Treo 500v user agent?? Will give it a go if I know where to find one!
Hi,
Take a look at
http://www.modaco.com/Vodafone-Live-Settings-t259142.html
Guys,
I just got a Vodafone Treo 750v which i really like. but it doesn't have Vodafone Live or Mobile TV access on it as standard. I managed to get my Tytn II working (with your help and the Modaco forum) several months ago and now I'm trying to see if you or anyone can get my 750v working.
First thing i did was install a cab file (from the thread in the post above) on my machine and setup a wap connection and i was straight in to Vodafone Live all of a sudden. Got to mobile tv page but Windows media player wouldn't connect via wap. So went to xda-developers page and downloaded the HTC v2.10 streaming player and installed it and set it up to connect via wap.
Success, almost - choosing a channel to watch now launches the HTC player and starts to buffer the video but when it gets to almost 100% buffered and is ready to start showing video it suddenly hangs, then has an error and wants to send an error log to Microsoft. Its almost like the HTC player is missing something or some codec or dll file.
Anyone know how to crack this last bit? Anyone use a different Streaming media player to do this?
Hope someone can help!
Paul
I flashed the HTC rom on my tilt a few days ago. Everything seems to work fine except that when I open a webpage (using Pocket IE), the 3G icon on the top changes to H. (What is H anyways?)
Other apps that require(?) 3G like Streaming media player and Messaging cannot connect at all. They try to connect to 3G, cycle thru the connection attempt twice and give up. But they work fine if I'm on wifi.
Are there any settings that I'm supposed to put in the Tilt?
I've tried searching on the forums but have been unsuccessful so far. If anyone can help me that would be awesome. Or point out keywords that I should use to search the forum, that would be great too.
Thanks.
Go to 'Settings' 'Connections' 'HSDPA' and uncheck the box.
BTW its High Speed Downlink Packet Access and you may need to subscribe from your carrier network for connection.
Thanks for the lightening fast reply. It got rid of the H icon. But streaming media still doesnt work.
When trying to open a youtube video, for example, it tries to connect to something, but fails eventually. I'll post some screenshots soon.
Do I need to change any settings in windows media player?
What branded phone were you using because you may have removed vital streaming SW required by your carrier.
AT&T Tilt aka Kaiser
I flashed it with the HTC rom from this forum.
Have a look at your programs and see if Flash Player is installed. If not, search the Forum for the cab (its in Dutty's thread in this forum flashlite) and install it. That may solve your problem.
The flash player is installed. As I can view the same streams if I use wifi.
But if I disable wifi, then the webpages open up, but no streaming media opens up.
Also, using Messaging, hotmail is able to download my mails on 3G, but not other accounts (ex. gmail IMAP). But everything works on wifi.
Sorry to be a pain in the ass, but I'm willing to search the forums if someone can point out the keywords to look for. I'm really clueless at this point.
Then look for the AT&T operator settings needed after flashing. If all is working on WiFi then that is definately your problem.
Thanks. I know its a problem on my end. But I don't know where to look for settings. I'm very new to this windows mobile world.
I'll search the forum now for AT&T settings and will get back.
Thanks a lot again for your help!
Damn... not sure where the info is. Can someone please point me in the right direction?
Here, try this.
http://www.wireless.att.com/support/deviceConfig.do?content=KB84444.html
Better still, found you this.
View attachment HTC_Network_Wizard_KAISER_1_0_29981_1.cab
You owe me a beer next time you are in Abu Dhabi.
I just tried the AT&T instructions and it screwed my IE connection. Every page load gave me an error. I reverted back to the original settings.
As for streaming videos, I managed to change the settings to use Media Net and it seems to work.
Still cant figure out how to do that with Messaging.
p.s.... trying the cab you just posted.
Okay, I tried that cab, and it still doesn't let me use any other email account in messaging. Here are the screen shots.
As you can see from the images, Windows Live (hotmail) email downloads just fine. But when I change the email to Gmail from the dropdown, and press Send/Receive, it fails to connect. What are the differences in the connections between the two.
By the way, sorry for the 90 degrees rotated images. It didn't let me upload images with heights more than 280. Weird
p.s. Farsquidge, I still owe you a beer
ashoooo said:
Thanks for the lightening fast reply. It got rid of the H icon. But streaming media still doesnt work.
When trying to open a youtube video, for example, it tries to connect to something, but fails eventually. I'll post some screenshots soon.
Do I need to change any settings in windows media player?
Click to expand...
Click to collapse
Wait, explain why you want to get rid of the "H"? H is HSDPA, which is the fastest 3G connection.
G = GPRS (slow)
E = Edge (faster than GPRS, but stil slow)
3G = UMTS (3G, fast)
H = HSDPA (3G+, fastest connection)
Assuming you have HSDPA in your region (which if it showed H means you do), you would normally want HSDPA. It provides speeds greater than 1Mbit/sec.
I've enabled it back. Thanks for the clarification.
Try using the Network settings wizard then do a soft reset to apply them.
Go through the AT&T settings page on the link to see they match and adjust them accordingly if not.
Then you will most likey have to go to the other setup pages on AT&T's site for email and MMS setup as you have lost all with the flash.
I tried the Network settings wizard. Didn't change anything.
Tried the AT&T settings page. It screwed up even more and I couldnt even browse web pages. So I reverted back to original settings.
I've managed to fix the streaming media player by making it use Media Net. As for Messaging, I'll have to look into AT&Ts setting for MMS. Will keep you guys posted.
p.s. You guys are amazing. Thanks for all the help!
If you look, a new version of Network settings wizard has been posted to this forum today.
Aah.. thanks, I found it. I'll try that in the evening when I get home and let you know.
Hello everybody, I've just upgraded my kaiser to windows mobile 6.5, build 21202.
one of the many problems I've found is that I can't send mms, or go to internet... I've noticed that the usual program that sets the mobile operator did'nt launch itself on startup.
Does anybody know an issue?
maybe a link to download this program...
thank you if you find time to answer me.
saigneur thor
Go to Start>Settings>Connections>Connection Setup
Set it to your Provider and Country manually. If it happens again set it up again and turn off auto config. Remember to restart.
As for your wireless go to
Start>Settings>Connections>Connections>Advanced>Select Networks
and make sure the correct provider for your internet is selected.
If you have a data plan I think (emphasis on think) it's Mi ISP or Medianet.
I hope that solves your problems, if that's it.
i'm afraid it doesn't change anything...
I have no acccces to the WAP, error 403 and i can't sent a mms...
I'm sade...
YESSSSSSSSSSSSS !
i found a solution :
just install a new "Network Config Wizard", downloaded on XDA devs' archives
i can send mms, and go on the net !!!!
I'me singing in the rain !!! just...
I 'm happy again !
lol
oh no! still have problems on the net, error 403 forbidden...