Database Develop

[Q] [SOLVED] Stuck in ODIN after a soft brick

Hello!
I've been flashing stock ROM for my ACE via ODIN. then I had a cut. hopefully the phone can get in download mode. but when i start normally there's a message of phone with a yellow sign trying to connect to computer. ODIN is STUCK with this message:
<1> START!!!
<1> set download environment.
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> mibib download..
PLEASE HELP ASAP! because one can not live without his ACE !

Samadony said:
Hello!
I've been flashing stock ROM for my ACE via ODIN. then I had a cut. hopefully the phone can get in download mode. but when i start normally there's a message of phone with a yellow sign trying to connect to computer. ODIN is STUCK with this message:
<1> START!!!
<1> set download environment.
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> mibib download..
PLEASE HELP ASAP! because one can not live without his ACE !
Click to expand...
Click to collapse
Try doing to Download Mode combo.. (Vol- Home Power) then hit start.
Luckier than me, the stock ROM I flashed through Ace had a corrupt boot.img- happy hard brick

So i press vol down & home & power! that's what i;ve been doing.
did you solve it ?

a yellow exclamation mark between a pc and phone icon is it?
try this.
take off battery, let the phone stay for around 10 seconds, press the three button combination for download mode (the home+vol down+power) and while u still holding those three button reinsert the battery. now device should go into download mode and u can properly flash with odin.

an0nym0us_ said:
a yellow exclamation mark between a pc and phone icon is it?
try this.
take off battery, let the phone stay for around 10 seconds, press the three button combination for download mode (the home+vol down+power) and while u still holding those three button reinsert the battery. now device should go into download mode and u can properly flash with odin.
Click to expand...
Click to collapse
Yes it's YELLOW mark.
I'll give it a try now, Hope it works because i really need to use it since I've an emergency.
EDIT: SAME stuck in mibib download, what's the mibib download??

crap.. forgot to mention.. while u do it, it shouldnt be connected to pc. only connect it to pc after it had succesfully go into download mode.
---------- Post added at 11:37 PM ---------- Previous post was at 11:32 PM ----------
Samadony said:
Yes it's YELLOW mark.
I'll give it a try now, Hope it works because i really need to use it since I've an emergency.
EDIT: SAME stuck in mibib download, what's the mibib download??
Click to expand...
Click to collapse
did u manage to force it into download mode by the step i said earlier?
flashing the phone while its still showing the error exclamation screen wont work.

an0nym0us_ said:
crap.. forgot to mention.. while u do it, it shouldnt be connected to pc. only connect it to pc after it had succesfully go into download mode.
Click to expand...
Click to collapse
Have you tried this sucessfully before? ..
trying one more time. thanks for ur help.

Samadony said:
Have you tried this sucessfully before? ..
trying one more time. thanks for ur help.
Click to expand...
Click to collapse
yes, i've got the same error exclamation screen before and i did personally test the force into download mode trick

I downloaded another stock rom to see if it's not from the other Stock i'm flashing but the one i'm flashing i'm sure 100% it's working...the new one have 3 .tar.md5 files here's the names:
APBOOT_S5830JPKP9_CL457554_REV03_user_low_true.tar.md5
CODE_S5830JPKP9_CL457554_REV03_user_low_true.tar.md5
GT-S5830-MULTI-CSC-OJPKP3.tar.md5
1. this isnot a one package stock?
2. shall i try another ODIN version
3. shall this be due to the OPS file?

an0nym0us_ said:
yes, i've got the same error exclamation screen before and i did personally test the force into download mode trick
Click to expand...
Click to collapse
Would you link me the stock you've flashed?

ughh u havent answered my earlier question yet. did u manage to force it into download mode by the step i instructed?
it doesnt matter which rom u download, which odin version u try, it wont work while its still showing the exclamation error screen.

an0nym0us_ said:
crap.. forgot to mention.. while u do it, it shouldnt be connected to pc. only connect it to pc after it had succesfully go into download mode.
---------- Post added at 11:37 PM ---------- Previous post was at 11:32 PM ----------
did u manage to force it into download mode by the step i said earlier?
flashing the phone while its still showing the error exclamation screen wont work.
Click to expand...
Click to collapse
Yes i did manage to force it into download mode, but still stuck in ODIN ! Crap. trying again and re informing you.

now the exclamation error solved, proceed with odin.
usually the stuck in odin caused by kies running in background. open windows task manager and kill kies process. and then open odin with administrator priviledge.
if its still doesnt work try on other pc.

an0nym0us_ said:
ughh u havent answered my earlier question yet. did u manage to force it into download mode by the step i instructed?
it doesnt matter which rom u download, which odin version u try, it wont work while its still showing the exclamation error screen.
Click to expand...
Click to collapse
1. i press the Vol down + home + power with no battery,
2. insert the battery while pressing
3. it automatically shows no screen but the downloading mode. (so i forced it to download)
4. i connect the cable to laptop
5. flash using odin, and still getting "mbib download..."

an0nym0us_ said:
now the exclamation error solved, proceed with odin.
usually the stuck in odin caused by kies running in background. open windows task manager and kill kies process. and then open odin with administrator priviledge.
if its still doesnt work try on other pc.
Click to expand...
Click to collapse
I've been trying this with no Kies, no SIM card and no SD-card.
trying on another laptop.

btw if your in windows vista or 7, disable windows uac control. that too can cause odin problem.
and u mention that u try without kies installed. make sure u had samsung's usb driver installed.

an0nym0us_ said:
btw if your in windows vista or 7, disable windows uac control. that too can cause odin problem.
and u mention that u try without kies installed. make sure u had samsung's usb driver installed.
Click to expand...
Click to collapse
ODIN reads my phone, i think then i have the USB Driver. I'm trying on another laptop now. hope it works.

an0nym0us_ said:
btw if your in windows vista or 7, disable windows uac control. that too can cause odin problem.
and u mention that u try without kies installed. make sure u had samsung's usb driver installed.
Click to expand...
Click to collapse
1. forced download
2. UAC is disabled
3. no kies
4. don't konw about Samsung USB driver if installed or no, but searching for that
5. it's been 5 mins and says mbib crap download.
what's wrong!??
EDIT: used ODIN as adminstrator, now it's stuck with setup connection? is that a driver issue?

u mention that odin can detect the phone, that proves u already had the driver installed.
but in case u want it, here u go. the standalone usb driver without kies crap.
https://hotfile.com/dl/141204140/576b45c/SAMSUNG_Mobile_Phones_USB_Driver.rar.html
and if the archive ask for password, its
Code:
samfirmware.com

Now I've made what you said, carefully. still Stuck in ODIN:
Download Start...
<0> Create File...
<1> StartThread Detected : 1
<2> StartThread Detected : 0
<3> StartThread Detected : 0
<4> StartThread Detected : 0
<5> StartThread Detected : 0
<6> StartThread Detected : 0
<7> StartThread Detected : 0
<8> StartThread Detected : 0
<1> setup connection...
<1> odin mode.. check plcatform verification.
<1> VerifyPlatform:V0, P0,R0
<1> START!!!
<1> set download environment.
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> mibib download.. << freeze here

(i9001) Odin stuck at (AMSS.mbn download..)

HELLP!! i am trying to update my moms S Plus I9001 to a newer Nordic version (i9001xxkqg) using Odin (Multi Downloader v4.43) and it stops on AMSS.mbn!! How do i fix this! i am on my cabin now with only one PC. so do you have a any idea???
Here is what Odin says.
Download Start...
<0> Create File...
<1> StartThread Detected : 1
<2> StartThread Detected : 0
<3> StartThread Detected : 0
<4> StartThread Detected : 0
<5> StartThread Detected : 0
<6> StartThread Detected : 0
<7> StartThread Detected : 0
<8> StartThread Detected : 0
<1> setup connection...
<1> odin mode.. check plcatform verification.
<1> VerifyPlatform:V0, P0,R0
<1> START!!!
<1> set download environment.
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> amss.mbn download..
(After 100 minutes)
I have tried many Odin versions but, only 4.43 works with (I9001 S Plus) And i have put the AriesVe.Ops in the Ops place and the Firmware in the One Package. And now my phone displays a yellow triangle and i cant turn it on!! plzzz help!! Plzzz!

I guess my phone is bricked.

Plzzz, help me.

Eirik2306 said:
Plzzz, help me.
Click to expand...
Click to collapse
1) remove battery and reinsert
2) go into download mode
3) ensure you got the correct Firmware and restart Odin
4) select location of files according to Firmware ( single file in PDA )
5) unchecked the " protect ops file" box on the Odin screen before starting
That should do it

Yeah.. Follow the above steps and you are good to go...
If my post helped, don't mind hitting THANKS ;-)

xsenman said:
1) remove battery and reinsert
2) go into download mode
3) ensure you got the correct Firmware and restart Odin
4) select location of files according to Firmware ( single file in PDA )
5) unchecked the " protect ops file" box on the Odin screen before starting
That should do it
Click to expand...
Click to collapse
That does not work for me, At the pda it says: wrong image type.
but it doensn't work at any way with protect ops on/off, and not with pda or one package.
can anyone help me?

jeantje said:
That does not work for me, At the pda it says: wrong image type.
but it doensn't work at any way with protect ops on/off, and not with pda or one package.
can anyone help me?
Click to expand...
Click to collapse
ok, lets try this again
First remove battery and reinsert
1) "Select OPS" AriesVE.ops
2) Unzip/unrar the ROM you are flashing.
If it's a single .tar.md5 file, check the option "One Package" in Odin and then load the .tar.md5 file using the One Package button at the very bottom. Odin will load it and check the MD5 checksum. and should be over in ten minutes
If your ROM consists of several .smd files,
Select Boot_loader.tar under BOOT
Select Modem under PHONE
Select PDA under PDA
Select CSC under CSC .
Press Start, Flashing should take about 10 minutes
If it fails, than try again with protect ops unchecked

:'(
xsenman said:
ok, lets try this again
First remove battery and reinsert
1) "Select OPS" AriesVE.ops
2) Unzip/unrar the ROM you are flashing.
If it's a single .tar.md5 file, check the option "One Package" in Odin and then load the .tar.md5 file using the One Package button at the very bottom. Odin will load it and check the MD5 checksum. and should be over in ten minutes
If your ROM consists of several .smd files,
Select Boot_loader.tar under BOOT
Select Modem under PHONE
Select PDA under PDA
Select CSC under CSC .
Press Start, Flashing should take about 10 minutes
If it fails, than try again with protect ops unchecked
Click to expand...
Click to collapse
hello, i'm dealing with the same situation :/
after unchecking the "protect ops" it goes as far as the "big partition size" error message and stalls again...
really really in need of help guys... :/

aspetos said:
hello, i'm dealing with the same situation :/
after unchecking the "protect ops" it goes as far as the "big partition size" error message and stalls again...
really really in need of help guys... :/
Click to expand...
Click to collapse
jeantje problem was solved by re downloading the Aries.ops from another source as samfirmwares was corrupted

xsenman said:
jeantje problem was solved by re downloading the Aries.ops from another source as samfirmwares was corrupted
Click to expand...
Click to collapse
xsenman do you have a direct link of Aries.ops that works? ty

aspetos said:
xsenman do you have a direct link of Aries.ops that works? ty
Click to expand...
Click to collapse
try this, have not checked it as, I use different phone
CWM For flashing with Odin: http://www.mediafire.com/?jg0jjdg8amjlj3b
AriesVe.ops http://www.mediafire.com/?ikx8iz8arzabx1h

xsenman said:
try this, have not checked it as, I use different phone
CWM For flashing with Odin: mediafire com/ ?jg0jjdg8amjlj3b
AriesVe.ops mediafire com/ ?ikx8iz8arzabx1h
Click to expand...
Click to collapse
Is it normal that it now seems to be on "recovery.img download" for like 9 minutes?
I used the above CWM For flashing with Odin, AriesVE.ops and provided Odin version (verified same odin version was used as previous attempts).
The "Protect OPS" check box is checked, right?

aspetos said:
Is it normal that it now seems to be on "recovery.img download" for like 9 minutes?
I used the above CWM For flashing with Odin, AriesVE.ops and provided Odin version (verified same odin version was used as previous attempts).
The "Protect OPS" check box is checked, right?
Click to expand...
Click to collapse
minimum time is not less than 10 min, so give it time, yes protect ops should be checked, inly If failed than try unchecked

I solved this problem with BroodROM RC5 all-in-one tar file, here is what I did:
A) Remove the .md5 extension and make it .tar
B) Use other USB port
C) Remove KIES and downloaded standalone drivers pack
D) Sit back and waited for 30 minutes until flashing complete

xsenman said:
minimum time is not less than 10 min, so give it time, yes protect ops should be checked, inly If failed than try unchecked
Click to expand...
Click to collapse
23 minutes and counting...
just to check, nothing moves on the phone screen (like a bar indicator)
Is that normal?

aspetos said:
23 minutes and counting...
just to check, nothing moves on the phone screen (like a bar indicator)
Is that normal?
Click to expand...
Click to collapse
hmm, think its stuck, do a battery pull to get out of it and you can try darristan suggestion

xsenman said:
hmm, think its stuck, do a battery pull to get out of it and you can try darristan suggestion
Click to expand...
Click to collapse
tried with the "Protect OPS" unchecked (just in case), left it a fair 10+ minutes, no indication, etc...
I'll try darristan suggestion. But excuse me for asking to be a bit more elaborate as far as steps are concerned, it's like 7:30 AM here and had a long night...
Is there a post relative to darristan downloads and/or procedures?
ty

aspetos said:
tried with the "Protect OPS" unchecked (just in case), left it a fair 10+ minutes, no indication, etc...
I'll try darristan suggestion. But excuse me for asking to be a bit more elaborate as far as steps are concerned, it's like 7:30 AM here and had a long night...
Is there a post relative to darristan downloads and/or procedures?
ty
Click to expand...
Click to collapse
here http://forum.xda-developers.com/showthread.php?p=20392786

darristan said:
I solved this problem with BroodROM RC5 all-in-one tar file, here is what I did:
A) Remove the .md5 extension and make it .tar
B) Use other USB port
C) Remove KIES and downloaded standalone drivers pack
D) Sit back and waited for 30 minutes until flashing complete
Click to expand...
Click to collapse
unfortunately no luck either...
stuck on amss.mbn download again, with out any indicators on the phone screen...
am i properly foobared?

aspetos said:
unfortunately no luck either...
stuck on amss.mbn download again, with out any indicators on the phone screen...
am i properly foobared?
Click to expand...
Click to collapse
Suggest you read the i9001 WIKI http://forum.xda-developers.com/wiki/Samsung_Galaxy_S_Plus/GT-I9001#Flashing to check, if there is anything you may or may not be doing.

galaxy mini soft brick odin passes but not rebooting

please help..!!!
my galaxy mini s-5570 from ornge uk (network locked).. got bricked. i can get into download mode and ramdump mode.
as i can get into download mode i tried to flash stock roms with odin ...every time odin detects phone and flashes successfully and PASSES ... but after the step "close serial port and wait untill reboot" my phone starts blinking again and not booting up.
i tried many stock roms i found here but all ending up the same way. i dont know what to do now...
phone can still get into download mode...
when i simply turn the phone on the samsung logo is blinking on the screen
please help me.. i dont know if it is because i am flshing wrong ROM or what? if so please provide me the proper rom for GALAXY MINI S-5570 ORANGE UK..PLEASE...

if it say pass mean all is gone in the right way so is good that you can go into download mode cuz you can flash a custom recovery with odin and with a custom recovery you can flash a new rom...like cm7 and you can see if the phone bootup
Sent from my GT-S5570 using xda premium

I had something similar. Try to find a multi package 2.2.1. It's not easy, but if you can flash that, it will reboot (at least for me)

here the link for 2.2.1 froyo
http://www.youtube.com/watch?v=7mv5d1q4Bfo
ok try thos also complete guide + 2.2.1 packages
http://www.sleetherz.com/2011/10/how-can-i-switch-back-my-galaxy-mini-to-default-froyo-2-2-1/
Sent from my GT-S5570 using xda premium

galaxy mini soft brick...
MAD_psycho_Zz said:
here the link for 2.2.1 froyo
ok try thos also complete guide + 2.2.1 packages
Sent from my GT-S5570 using xda premium
Click to expand...
Click to collapse
thank you for replying to my post...
but i tried the froyo with multiple files but still the same thing happening..
after "close serial port....." message. phone screen starts blinking ...not rebooting.. HERE IS WHAT I GOT WHEN I TRIED ONE MULTI FILE FIRM WARE...... S5570_XXKB1
Download Start...
<0> Create File...
<1> StartThread Detected : 0
<2> StartThread Detected : 1
<3> StartThread Detected : 0
<4> StartThread Detected : 0
<5> StartThread Detected : 0
<6> StartThread Detected : 0
<7> StartThread Detected : 0
<8> StartThread Detected : 0
<2> setup connection...
<2> odin mode.. check plcatform verification.
<2> VerifyPlatform:V0, P0,R0
<2> START!!!
<2> set download environment.
<2> big partition size!!
<2> big partition size!!
<2> big partition size!!
<2> big partition size!!
<2> big partition size!!
<2> mibib download..
<2> 1/10 Finished.
<2> qcsbl download..
<2> 2/10 Finished.
<2> oemsbl download..
<2> 3/10 Finished.
<2> amss download..
<2> 4/10 Finished.
<2> arm11boot download..
<2> 5/10 Finished.
<2> boot.img download..
<2> 6/10 Finished.
<2> recovery.img download..
<2> 7/10 Finished.
<2> system.rfs download..
<2> 8/10 Finished.
<2> data.rfs download..
<2> 9/10 Finished.
<2> csc.rfs download..
<2> 10/10 Finished.
<2> reset pda..
<0> Started Timer
<2> Close serial port and wait until rebooting.
<2> PASS!!!
<0> Destroy instant..
<0> Killed timer
BUT AFTER close serial port and wait untill rebooting my phone just starts blinking ..
please help

Remove sim card, memory card.
Flash a stock firmware which has all the 4 files + .ops file.
After pass.
Pull battery out.
Put it back in.
Go into recovery.(Home+Power)
Clear User data and cache
Reboot.

chemicalrage said:
Remove sim card, memory card.
Flash a stock firmware which has all the 4 files + .ops file.
After pass.
Pull battery out.
Put it back in.
Go into recovery.(Home+Power)
Clear User data and cache
Reboot.
Click to expand...
Click to collapse
i took out battery and after puting it back i tried to go into recovery but not going in to recovery as before ...only download mode and ramdump mode are available

how strange...:/ try flashing froyo with the guide above...then flash stock gingerbread then flash a cwm recovery with odin and then try going into recovery mode and do a full wipe(cache data dalvik cache battery stats and format system in mount and storage menu) if u can do it mount usb from recovery put a custom rom into your sd flash it wipe data and cache again and reboot hopeing your phone will boot...

MAD_psycho_Zz said:
how strange...:/ try flashing froyo with the guide above...then flash stock gingerbread then flash a cwm recovery with odin and then try going into recovery mode and do a full wipe(cache data dalvik cache battery stats and format system in mount and storage menu) if u can do it mount usb from recovery put a custom rom into your sd flash it wipe data and cache again and reboot hopeing your phone will boot...
Click to expand...
Click to collapse
is there any possibility that it is stuck at boot screen because of files left behind by previous roms...? in tht case is there any tool to wipe the partitions before flashing (as i can not go into recovery mode the usual way of wiping is impossible)?

Now my phone is totally bricked....!!!!!
jaizkt said:
is there any possibility that it is stuck at boot screen because of files left behind by previous roms...? in tht case is there any tool to wipe the partitions before flashing (as i can not go into recovery mode the usual way of wiping is impossible)?
Click to expand...
Click to collapse
now...my phone is totally bricked.....!!!!!!!!!!!!!!!!!! AS I tried to flash the file "arm11boot" as boot file in odin (as told by some person in this forum...)
and now i dont have anything except a blank screen... USB JIG is also not working..... SO MY ADVICE TO ALL....PLEASE DONT FLASH THAT BOOT FILE USING ODIN IT WILL JUST BRICK YOUR PHONE... DONT REMEMBER THE NAME OF THAT PERSON WHO SUGGESTED IT..
TODAY I LEFT MY PHONE AT SAMSUNG SERVICE FOR GETTING MY MOTHERBOARD CHANGED....its bit costly (3800 indian rupees)... but i dont want to make my phone my paper weight...so....

jaizkt said:
now...my phone is totally bricked.....!!!!!!!!!!!!!!!!!! AS I tried to flash the file "arm11boot" as boot file in odin (as told by some person in this forum...)
and now i dont have anything except a blank screen... USB JIG is also not working..... SO MY ADVICE TO ALL....PLEASE DONT FLASH THAT BOOT FILE USING ODIN IT WILL JUST BRICK YOUR PHONE... DONT REMEMBER THE NAME OF THAT PERSON WHO SUGGESTED IT..
TODAY I LEFT MY PHONE AT SAMSUNG SERVICE FOR GETTING MY MOTHERBOARD CHANGED....its bit costly (3800 indian rupees)... but i dont want to make my phone my paper weight...so....
Click to expand...
Click to collapse
that's the bootloader u shouldn't play with it

The person who told you about the bootloader should be banned from xda. I swear what a jackass.

Messi10 said:
that's the bootloader u shouldn't play with it
Click to expand...
Click to collapse
Dear Messi,
i have done all the above successfully, including rooting with odin and installing cwm recovery.
but now on trying to install a custom rom it is stuck on android logo screen. after restoring to the stock rom, it gets stuck to samsung galaxy logo screen
pls help.. its urgent and its my sis in laws phone..
thanks in advance..

Bhupen Gaitonde said:
Dear Messi,
i have done all the above successfully, including rooting with odin and installing cwm recovery.
but now on trying to install a custom rom it is stuck on android logo screen. after restoring to the stock rom, it gets stuck to samsung galaxy logo screen
pls help.. its urgent and its my sis in laws phone..
thanks in advance..
Click to expand...
Click to collapse
Try wiping from CWM.

I got an ide a but Dino if this would work
if you could go to recovery mode that's good
get your SD card out and put it in your PC then download a ROM and then put it in the SD card after that put the SD card back to your phone and go to recovery and flash it like normal and don't forget to wipe
I Duno if this will work
edit:woops I think I'm late
Sent from my GT-S5570 using xda premium

jaizkt said:
now...my phone is totally bricked.....!!!!!!!!!!!!!!!!!! AS I tried to flash the file "arm11boot" as boot file in odin (as told by some person in this forum...)
and now i dont have anything except a blank screen... USB JIG is also not working..... SO MY ADVICE TO ALL....PLEASE DONT FLASH THAT BOOT FILE USING ODIN IT WILL JUST BRICK YOUR PHONE... DONT REMEMBER THE NAME OF THAT PERSON WHO SUGGESTED IT..
TODAY I LEFT MY PHONE AT SAMSUNG SERVICE FOR GETTING MY MOTHERBOARD CHANGED....its bit costly (3800 indian rupees)... but i dont want to make my phone my paper weight...so....
Click to expand...
Click to collapse
You paid a visit to Samsung center.
Was the problem solved?

If Your devices brick with Blank screen. you can test my way.
Step 1. Pull out your battery, Remove Sd card and SIM card.
Step 2. Connect your phone to pc or charger (Charge without battery)
Step 3. Pres Vol Up + Down and power.
Step 4. Put your battery back, now if work your phone will charging.
Step 5. go to download mode now and flash it.
I try this because my phone bricked with CWM.
Sent from my GT-S5570 using xda app-developers app

Back to Stock Recovery

Hello everybody
I have tried to find something about getting the phone back to stock but with no success
Here is my problem :
I have changed the stock recovery and added 2 mods , old tv shutdown , and a battery mod . about 1 year ago
I think my phone has some hardware problems because it keeps shutting down for no apparent reason and it does this a few times a day and i want to take it back to Vodafone to be checked on warranty .
I want to retun it to the stock out of the box but i have problems finding how to restore the stock recovery , is there a way ?
Can i delete the 2 mods without flashing the whole ROM ?
Sorry if this topic is redundant with another but i didn't find it .
I have a samsung galaxy s plus i9001 Vodafone Romania
Other info :
2.3.5
base band : i9001BUKP1
version number GINGERBREAD.BUKP2

R: Back to Stock Recovery
You can find the stock recovery in the i9001 wiki page, bit i think that flashing it would be useless for your problem. You should do a nandroid backup before installing any mod...
Inviato dal mio frigo a pedali.

i have found the following information
Stock recovery
If for some reason you ever need to go back to stock recovery, wintel_mac has prepared a zip you can install in CWM or FeaMod:
9001_stock_recovery-signed.zip
Click to expand...
Click to collapse
But not sure how to use the file ...
I have made a back-up with Titanium before adding the 2 Modes .

fast way to get it back: Download you exact same firmware from sammobile.com and flash it with odin! you are back to very very stock! take it to vodafone and you are done!!
if you have putted some tweak on it this ethod will also remove it so you are totally sure about the warranty to be back! If you are rooted before perform this action download and flash from recovery the un-root zip from the guide!
for information about odin and this other stuff please refer to the guide! there is everything explained! If you have anymore dubts visit q&q i9001 thread inthe q&a section of the i9000 forum!

ok, so i changed the recovery now i have the stock one , i have made a recovery with Titanim and the old tv shud down has gone , but the batery MOD is still active , any ideea on how tk delete it ?

laurcapa said:
ok, so i changed the recovery now i have the stock one , i have made a recovery with Titanim and the old tv shud down has gone , but the batery MOD is still active , any ideea on how tk delete it ?
Click to expand...
Click to collapse
Download a same firmware and flash with Odin brother...the person one post before you already told you what to do ==

and now for some updates
I wanted to install cm9 and as required i had to install clockworkmod recovery , I've installl version v6.0.1.3 but i have a problem with it , it seems that the home button is not working properly , when i press it it just moves the cursor up, the button on the left moves it down ... read that is a touch recovery , but the touch is not working on it
I managed to soft-brick the phone because by mistake instade of a md5 rom i selected a zip by mistake, the phone showed the BSOD and the only mode it will entered was ROMDUMP ore something like that , but managed to get around by flashing boot_loader fond on the the forum, now the phone enters in download and recovery but i have a problem , because the recovery does not work i'm trying to flash anoter recovery using odin , but i does not start , i get the following log :
Download Start...
<0> Create File...
<1> StartThread Detected : 0
<2> StartThread Detected : 1
<3> StartThread Detected : 0
<4> StartThread Detected : 0
<5> StartThread Detected : 0
<6> StartThread Detected : 0
<7> StartThread Detected : 0
<8> StartThread Detected : 0
<2> setup connection...
<2> e - dll cannot setup connection with the target.
<0> Destroy instant..
<0> Killed timer
or there is another message
<7> StartThread Detected : 0
<8> StartThread Detected : 0
<1> setup connection...
<1> odin mode.. check plcatform verification.
<1> VerifyPlatform:V0, P0,R0
I am stuck , some advice on how to flash the current recovery ?

laurcapa said:
and now for some updates
I wanted to install cm9 and as required i had to install clockworkmod recovery , I've installl version v6.0.1.3 but i have a problem with it , it seems that the home button is not working properly , when i press it it just moves the cursor up, the button on the left moves it down ... read that is a touch recovery , but the touch is not working on it
I managed to soft-brick the phone because by mistake instade of a md5 rom i selected a zip by mistake, the phone showed the BSOD and the only mode it will entered was ROMDUMP ore something like that , but managed to get around by flashing boot_loader fond on the the forum, now the phone enters in download and recovery but i have a problem , because the recovery does not work i'm trying to flash anoter recovery using odin , but i does not start , i get the following log :
Download Start...
<0> Create File...
<1> StartThread Detected : 0
<2> StartThread Detected : 1
<3> StartThread Detected : 0
<4> StartThread Detected : 0
<5> StartThread Detected : 0
<6> StartThread Detected : 0
<7> StartThread Detected : 0
<8> StartThread Detected : 0
<2> setup connection...
<2> e - dll cannot setup connection with the target.
<0> Destroy instant..
<0> Killed timer
or there is another message
<7> StartThread Detected : 0
<8> StartThread Detected : 0
<1> setup connection...
<1> odin mode.. check plcatform verification.
<1> VerifyPlatform:V0, P0,R0
I am stuck , some advice on how to flash the current recovery ?
Click to expand...
Click to collapse
Maybe you're using a CWM with the menu button ?
And it's not true that you only can get in RAMDUMP mode. when your device is off. hold volume down + power until you see download mode, if that doesn't work try this:
quoted from my unbrick tutorial:
CHAPTER 3. Getting in Download Mode
If your Samsung Galaxy S Plus is (partially) bricked and you have BSOD:
1. Unplug your phone if its connected to your PC
2. Hold Vol UP + Vol Down + Power, the screen will flash black
3. Continue holding down all 3 buttons, you will see the BSOD screen again, continue holding all 3 buttons, the screen will flash black again
4. Release the power button only. This will put you into Download Mode
Don’t expect it to work the first time you try it. If it keeps failing try the alternative:
1. Start Odin Multi Downloader
2. Connect your phone (which is in BSOD) to the PC
3. Wait till Windows finished installing drivers and Odin recognized your phone
4. Hold Vol Down + Home + Power, once the black screen flashes, release the Power button. This will put you into Download Mode
If this also doesn’t work and you are getting nervous about your situation:
1. Go to DealXtreme, this small product of $1.60 can help getting in download mode instantly
2. Buy it and wait for it’s arrival (the shipping is free but it can take a few days, so you will have no phone at that time)
3. Now when your phone is off, plugin the jig and wait until it goes on, now it will go in download mode and you’re ready to go
oh and the odin bug is very common, just restart odin and try again

laurcapa said:
and now for some updates
I wanted to install cm9 and as required i had to install clockworkmod recovery , I've installl version v6.0.1.3 but i have a problem with it , it seems that the home button is not working properly , when i press it it just moves the cursor up, the button on the left moves it down ... read that is a touch recovery , but the touch is not working on it
I managed to soft-brick the phone because by mistake instade of a md5 rom i selected a zip by mistake, the phone showed the BSOD and the only mode it will entered was ROMDUMP ore something like that , but managed to get around by flashing boot_loader fond on the the forum, now the phone enters in download and recovery but i have a problem , because the recovery does not work i'm trying to flash anoter recovery using odin , but i does not start , i get the following log :
Download Start...
<0> Create File...
<1> StartThread Detected : 0
<2> StartThread Detected : 1
<3> StartThread Detected : 0
<4> StartThread Detected : 0
<5> StartThread Detected : 0
<6> StartThread Detected : 0
<7> StartThread Detected : 0
<8> StartThread Detected : 0
<2> setup connection...
<2> e - dll cannot setup connection with the target.
<0> Destroy instant..
<0> Killed timer
or there is another message
<7> StartThread Detected : 0
<8> StartThread Detected : 0
<1> setup connection...
<1> odin mode.. check plcatform verification.
<1> VerifyPlatform:V0, P0,R0
I am stuck , some advice on how to flash the current recovery ?
Click to expand...
Click to collapse
First this is not where to ask, just so that you know!
Second, i really sugget to go back to stock compleatly and then proceed again to get CM9.
So always via odin flash you original firmware from sammobile.
For the messages that odin gives, try all the port on your computer, due to the fact that not all port works with it! when i use odin on my virtual machin with windows xp sometimes one of my usb works sometime the other. but the pc is always the same, so try them ALL!
If instead you want to try and flash just a custom recovery use broodplank quickflasher! it is easy and safe!
hope it works out!

maybe you misunderstood me , i will try be a little more explicit , so :
my phone is not bricked at this moment , I only tried to explain all the steps that got me to the current situation
i am able now to go in recovery mode (but this recovery does not allow me to do anything because the home button doesn't enable anything , only scrolls throw the menu , i explained in the previous post) and in download mode ...
the problem is that after i flashed the boot_loader after being stuck in RAMDUMP that solved the BSOD when i try to flash another recovery with odin it does not work and i don't think is a port problem because odin recognizes the phone , it gets stuck at <1> VerifyPlatform:V0, P0,R0 and does nothing .
in summary :
-flash sotck recovery with clockworkmod recovery v6.0.1.3 (not with odin)
-flash with odin a zip file by mistake got the phone semi-brick , BSOD only RAMDUMP worked
-flashd with odin from BSOD the bootloader and got the phone back
-not able to flash anoter recovery with odin because the above problem
solutions ?

laurcapa said:
it gets stuck at <1> VerifyPlatform:V0, P0,R0 and does nothing .
-not able to flash anoter recovery with odin because the above problem
solutions ?
Click to expand...
Click to collapse
Have you press the reset button in Odin after you flash the Bootloader?
Sometimes...(Not sometimes but every time for me) the Odin get stucked if you try to flash for second time without reset it...

After i flashed the BootLoader odin reseted the phone and told me to remove the serial link , so didn't requested me to reset anything

laurcapa said:
After i flashed the BootLoader odin reseted the phone and told me to remove the serial link , so didn't requested me to reset anything
Click to expand...
Click to collapse
Odin won't ask you to reset anything but there is a reset button on the right hand side...

nope , haven't reseted anything , but tried several times after closing and restarting odin

laurcapa said:
nope , haven't reseted anything , but tried several times after closing and restarting odin
Click to expand...
Click to collapse
Close Odin, Restart Odin again...press the reset files button, select ariesve.ops, one package, CWM.tar.md5
try and see...

laurcapa said:
nope , haven't reseted anything , but tried several times after closing and restarting odin
Click to expand...
Click to collapse
try from another pc. or battery pull let it be half an hour insert battery and try again. as things are now you can just try again and again to flash something.
or try out heimdall, i don't know if i9001 is supported but maybe it can work!

I solved the problem , after this post we cand consider the end of this topic.
The problem was due to the fact that i was using Android Reboot to get in recovery or Download mode , even if the phone showed me like i was in download mode i had the above error <1> VerifyPlatform:V0, P0,R0 even if the com port was open in odin ... after booting in download mode by pressing the buttons odin was able to flash the recovery .
What i learnd from this experience :
clockworkmod recovery v6.0.1.3 is not stable and for my device it didn't worked , not to be use
do not use .bat reboots to get in download mode when using odin
otherwise i now run CM10 with phantom kernel , i hope the phone doesn't restarts like before
thanks to everyone for the help and support
best regards

AW: Back to Stock Recovery
you have cm10 with other kernel and stock recovery? why? you must have for updates cwm or twrp recovery. a stable cwm is version 5.5.4.
Gesendet von meinem GT-I9001 mit Tapatalk 2

i have the following :
cwm version 5.5.4
CM v10
Phenom kernel

Hy
New question .
Can i use a custom kernel on a stock ROM ? Right now my phone is stock , i'm wondering if i install clickmod recovery and flush the custom kernel will it work .
10x

Restarted with sim card

Hello everyone, i have a Galaxy S Plus, i flashing with 2.3.6 Gingerbread without sim card, after installation with odin multi downloader with AriesVe.ops file i tryed insert the sim card but it was restarted or power off., but without sim card it's perfectlly, no problems, no restarts, no anything.
In recovery mode it displays status " >>> status = 00 >> and i have a option "install fota", please help me and sorry for my english.

Happy? said:
Hello everyone, i have a Galaxy S Plus, i flashing with 2.3.6 Gingerbread without sim card, after installation with odin multi downloader with AriesVe.ops file i tryed insert the sim card but it was restarted or power off., but without sim card it's perfectlly, no problems, no restarts, no anything.
In recovery mode it displays status " >>> status = 00 >> and i have a option "install fota", please help me and sorry for my english.
Click to expand...
Click to collapse
download the i9001 firmware from here for your region and flash again with ariesVe.ops
Check this out! Links to useful Guides and " Banned " Documentaries ​

flashing with sim card or without ? thanks.

Happy? said:
flashing with sim card or without ? thanks.
Click to expand...
Click to collapse
you can flash with SIM Card, its not a problem. Its possible the earlier ROM you flashed could have been corrupted.
Check this out! Links to useful Guides and " Banned " Documentaries ​

Thanks, i try this now but i have a problem. i try connect my galaxy to odin and recived a error port..i tryed other port usb and i have two yellow box in odin(can see in attache file). i tryed closed the odin and reopen but when open odin without connect my phone first yellow box recived a message: added, and after connect my phone displays a second yellow box. the process runs in a second box.
I have again same problem with sim card, restarted restarted.. please...help me.
p.s: i search my region for firmware but i not found. my region is romania, i tryed germany because is close.
please help me.
with respect.

Happy? said:
but when open odin without connect my phone first yellow box recived a message: added, and after connect my phone displays a second yellow box. the process runs in a second box.
Click to expand...
Click to collapse
I think you need to try with another PC or laptop, as com port should not connect when nothing is connected.
also charge you phone fully and KILL KIES, using task manager when flashing
Check this out! Links to useful Guides and " Banned " Documentaries ​

i try this, man, i uninstall the kies, now open two yellow box.
i restart my laptop, i connect my samsung in download mode to pc, i open the odin, message: added, detected, i upload .ops file and trd.md5 file and start, but recived error port, swich the port added also yellow box..and this is problem..
Download Start...
<0> Create File...
<1> StartThread Detected : 1
<2> StartThread Detected : 1
<3> StartThread Detected : 0
<4> StartThread Detected : 0
<5> StartThread Detected : 0
<6> StartThread Detected : 0
<7> StartThread Detected : 0
<8> StartThread Detected : 0
<1> setup connection...
<1> odin mode.. check plcatform verification.
<1> VerifyPlatform:V0, P0,R0
<1> START!!!
<1> set download environment.
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> amss.mbn download..
<1> 1/7 Finished.
<1> adsp.mbn download..
<2> --- cannot open the usb serial port. code: 2
<1> 2/7 Finished.
<1> boot.img download..
<1> 3/7 Finished.
<1> system.img.ext4 download..
<1> 4/7 Finished.
<1> cache.img.ext4 download..
<1> 5/7 Finished.
<1> recovery.img download..
<1> 6/7 Finished.
<1> preload.img.ext4 download..
<1> 7/7 Finished.
<1> reset pda..
<0> Started Timer
<1> Close serial port and wait until rebooting.
<2> Download Error (transfer)..
Click to expand...
Click to collapse

Happy? said:
i try this, man, i uninstall the kies, now open two yellow box.
i restart my laptop, i connect my samsung in download mode to pc, i open the odin, message: added, detected, i upload .ops file and trd.md5 file and start, but recived error port, swich the port added also yellow box..and this is problem..
Click to expand...
Click to collapse
download the Odin 4.43 as well as aries VE.ops file from another source and try.
Check this out! Links to useful Guides and " Banned " Documentaries ​

i try and this..not work..

Odin 4.43 , Odin 4.43 with SMD + Aries Ve.ops
attached

i try and this..not working. i have a question. why working without sim ? exist a possibil option to be change this error?

Happy? said:
i try and this..not working. i have a question. why working without sim ? exist a possibil option to be change this error?
Click to expand...
Click to collapse
Good question, but honestly have no idea as first time, I heard of this problem, where Odin connects without having phone attached.
But I would like to know
1) Is your IMEI still available when you flash without SIM card?
2) Did you get this phone recently? was this SIM blocked by Network or original owner?
read this for clarification
Check this out! Links to useful Guides and " Banned " Documentaries ​

I try flashing on other pc and odin i worked perfectly (just one box) but i have again sim card problem.
I try the custom room, again.. reboot when insert sim card.
Do you think that problem be solved with unroot? My phone is root..

Happy? said:
I try flashing on other pc and odin i worked perfectly (just one box) but i have again sim card problem.
I try the custom room, again.. reboot when insert sim card.
Do you think that problem be solved with unroot? My phone is root..
Click to expand...
Click to collapse
can you try flashing with the SIM card inside ( just check your sim card is inserted without force and no pins are damaged ( i know difficult to see that)
Check this out! Links to useful Guides and " Banned " Documentaries ​