Database Develop

[Q] [SOLVED] Stuck in ODIN after a soft brick

Hello!
I've been flashing stock ROM for my ACE via ODIN. then I had a cut. hopefully the phone can get in download mode. but when i start normally there's a message of phone with a yellow sign trying to connect to computer. ODIN is STUCK with this message:
<1> START!!!
<1> set download environment.
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> mibib download..
PLEASE HELP ASAP! because one can not live without his ACE !

Samadony said:
Hello!
I've been flashing stock ROM for my ACE via ODIN. then I had a cut. hopefully the phone can get in download mode. but when i start normally there's a message of phone with a yellow sign trying to connect to computer. ODIN is STUCK with this message:
<1> START!!!
<1> set download environment.
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> mibib download..
PLEASE HELP ASAP! because one can not live without his ACE !
Click to expand...
Click to collapse
Try doing to Download Mode combo.. (Vol- Home Power) then hit start.
Luckier than me, the stock ROM I flashed through Ace had a corrupt boot.img- happy hard brick

So i press vol down & home & power! that's what i;ve been doing.
did you solve it ?

a yellow exclamation mark between a pc and phone icon is it?
try this.
take off battery, let the phone stay for around 10 seconds, press the three button combination for download mode (the home+vol down+power) and while u still holding those three button reinsert the battery. now device should go into download mode and u can properly flash with odin.

an0nym0us_ said:
a yellow exclamation mark between a pc and phone icon is it?
try this.
take off battery, let the phone stay for around 10 seconds, press the three button combination for download mode (the home+vol down+power) and while u still holding those three button reinsert the battery. now device should go into download mode and u can properly flash with odin.
Click to expand...
Click to collapse
Yes it's YELLOW mark.
I'll give it a try now, Hope it works because i really need to use it since I've an emergency.
EDIT: SAME stuck in mibib download, what's the mibib download??

crap.. forgot to mention.. while u do it, it shouldnt be connected to pc. only connect it to pc after it had succesfully go into download mode.
---------- Post added at 11:37 PM ---------- Previous post was at 11:32 PM ----------
Samadony said:
Yes it's YELLOW mark.
I'll give it a try now, Hope it works because i really need to use it since I've an emergency.
EDIT: SAME stuck in mibib download, what's the mibib download??
Click to expand...
Click to collapse
did u manage to force it into download mode by the step i said earlier?
flashing the phone while its still showing the error exclamation screen wont work.

an0nym0us_ said:
crap.. forgot to mention.. while u do it, it shouldnt be connected to pc. only connect it to pc after it had succesfully go into download mode.
Click to expand...
Click to collapse
Have you tried this sucessfully before? ..
trying one more time. thanks for ur help.

Samadony said:
Have you tried this sucessfully before? ..
trying one more time. thanks for ur help.
Click to expand...
Click to collapse
yes, i've got the same error exclamation screen before and i did personally test the force into download mode trick

I downloaded another stock rom to see if it's not from the other Stock i'm flashing but the one i'm flashing i'm sure 100% it's working...the new one have 3 .tar.md5 files here's the names:
APBOOT_S5830JPKP9_CL457554_REV03_user_low_true.tar.md5
CODE_S5830JPKP9_CL457554_REV03_user_low_true.tar.md5
GT-S5830-MULTI-CSC-OJPKP3.tar.md5
1. this isnot a one package stock?
2. shall i try another ODIN version
3. shall this be due to the OPS file?

an0nym0us_ said:
yes, i've got the same error exclamation screen before and i did personally test the force into download mode trick
Click to expand...
Click to collapse
Would you link me the stock you've flashed?

ughh u havent answered my earlier question yet. did u manage to force it into download mode by the step i instructed?
it doesnt matter which rom u download, which odin version u try, it wont work while its still showing the exclamation error screen.

an0nym0us_ said:
crap.. forgot to mention.. while u do it, it shouldnt be connected to pc. only connect it to pc after it had succesfully go into download mode.
---------- Post added at 11:37 PM ---------- Previous post was at 11:32 PM ----------
did u manage to force it into download mode by the step i said earlier?
flashing the phone while its still showing the error exclamation screen wont work.
Click to expand...
Click to collapse
Yes i did manage to force it into download mode, but still stuck in ODIN ! Crap. trying again and re informing you.

now the exclamation error solved, proceed with odin.
usually the stuck in odin caused by kies running in background. open windows task manager and kill kies process. and then open odin with administrator priviledge.
if its still doesnt work try on other pc.

an0nym0us_ said:
ughh u havent answered my earlier question yet. did u manage to force it into download mode by the step i instructed?
it doesnt matter which rom u download, which odin version u try, it wont work while its still showing the exclamation error screen.
Click to expand...
Click to collapse
1. i press the Vol down + home + power with no battery,
2. insert the battery while pressing
3. it automatically shows no screen but the downloading mode. (so i forced it to download)
4. i connect the cable to laptop
5. flash using odin, and still getting "mbib download..."

an0nym0us_ said:
now the exclamation error solved, proceed with odin.
usually the stuck in odin caused by kies running in background. open windows task manager and kill kies process. and then open odin with administrator priviledge.
if its still doesnt work try on other pc.
Click to expand...
Click to collapse
I've been trying this with no Kies, no SIM card and no SD-card.
trying on another laptop.

btw if your in windows vista or 7, disable windows uac control. that too can cause odin problem.
and u mention that u try without kies installed. make sure u had samsung's usb driver installed.

an0nym0us_ said:
btw if your in windows vista or 7, disable windows uac control. that too can cause odin problem.
and u mention that u try without kies installed. make sure u had samsung's usb driver installed.
Click to expand...
Click to collapse
ODIN reads my phone, i think then i have the USB Driver. I'm trying on another laptop now. hope it works.

an0nym0us_ said:
btw if your in windows vista or 7, disable windows uac control. that too can cause odin problem.
and u mention that u try without kies installed. make sure u had samsung's usb driver installed.
Click to expand...
Click to collapse
1. forced download
2. UAC is disabled
3. no kies
4. don't konw about Samsung USB driver if installed or no, but searching for that
5. it's been 5 mins and says mbib crap download.
what's wrong!??
EDIT: used ODIN as adminstrator, now it's stuck with setup connection? is that a driver issue?

u mention that odin can detect the phone, that proves u already had the driver installed.
but in case u want it, here u go. the standalone usb driver without kies crap.
https://hotfile.com/dl/141204140/576b45c/SAMSUNG_Mobile_Phones_USB_Driver.rar.html
and if the archive ask for password, its
Code:
samfirmware.com

Now I've made what you said, carefully. still Stuck in ODIN:
Download Start...
<0> Create File...
<1> StartThread Detected : 1
<2> StartThread Detected : 0
<3> StartThread Detected : 0
<4> StartThread Detected : 0
<5> StartThread Detected : 0
<6> StartThread Detected : 0
<7> StartThread Detected : 0
<8> StartThread Detected : 0
<1> setup connection...
<1> odin mode.. check plcatform verification.
<1> VerifyPlatform:V0, P0,R0
<1> START!!!
<1> set download environment.
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> mibib download.. << freeze here

[Q] Stuck in recovery/download mode [I9001 plus]

Hi,
I got I9001 plus running stock 2.3.5 - I rooted the device successfully - post that i installed cwm v6 and even that was successful, however when i went to recovery i see that i am unable to select any option from home button or power button. When ever i press home button it just scrolls down and power button does nothing. I tried flashing recovery using odin - however odin doesnt detect my device even though i had all drivers, now i am stuck in recovery or download mode. Any suggestions?
Thanks.

innovat0r said:
however odin doesnt detect my device even though i had all drivers, now i am stuck in recovery or download mode. Any suggestions?
Thanks.
Click to expand...
Click to collapse
you can use My Android Solutions to solve it
But First powerdown, pull out Battery, SIM CARD, and EXT.SD card, press power button for a minute, than powerup without SIM and Ext.SD Card....
(Do remember to backup your contacts, data, images etc and also your EFS folder before flashing a ROM and make sure you have more than 50% battery charge before you attempt any sort of flashing.)

xsenman said:
you can use My Android Solutions to solve it
But First powerdown, pull out Battery, SIM CARD, and EXT.SD card, press power button for a minute, than powerup without SIM and Ext.SD Card....
(Do remember to backup your contacts, data, images etc and also your EFS folder before flashing a ROM and make sure you have more than 50% battery charge before you attempt any sort of flashing.)
Click to expand...
Click to collapse
Oding detects the device but when i select cwm .tar file in pda it says "invalid image type"

if odin detect your device it is easy !
There's a solution to this problem in this post.

webalfa said:
if odin detect your device it is easy !
There's a solution to this problem in this post.
Click to expand...
Click to collapse
Tried the above post
Thanks to everyony who hear my pray and tried to help whith my problem (bootloop into recovery). And Acro68 sorry that i'm bothered you. I here agan to publish the solution. Problem was in boot, like people on other forum says (it was damaged somehow).
Here is file, that need to be flash in Odin.
1. Go into Downloading mode
2. Select OPS - AriesVE.ops(Odin)
3. Select BOOT - Boot_loader.tar
4. Flash it and bootloop into recovery never gona happen.
Click to expand...
Click to collapse
but i am getting this message in odin :
<5> StartThread Detected : 0
<6> StartThread Detected : 0
<7> StartThread Detected : 0
<8> StartThread Detected : 0
<1> setup connection...
And its just not proceeding further after <1> setup connection...
now?

Install Samsung USB Drivers and connect device to another USB port , maybe help .

webalfa said:
Install Samsung USB Drivers and connect device to another USB port , maybe help .
Click to expand...
Click to collapse
Already tried, didnt help. Any other solution.

innovat0r said:
Already tried, didnt help. Any other solution.
Click to expand...
Click to collapse
look at My Android Solutions it has soultions for so many problems you may encounter
Problem:- Odin gets Stuck on <ID:0/008> Set PIT file. or <ID:0/003> SetupConnection.. or <ID:0/007> Removed!
Note:
When using Odin to Flash, Open task manager and close these : Kies.exe , KiesTrayAgent.exe, and KiesPDLR.exe
IF your downloaded File (.tar, .zip, .md5 .rar ) is corrupted, Odin could get stuck too, so download from another source, if it happens repeatedly

Too long instaling CWM with Odin?

Hi!
I try to Instal ClockworkMod on my Samsung Galaxy S Plus to install CyanogenMod 10.1. I use this tutorial for that:
Pre-requisites:
Make sure that you have charged your mobile at least up to 70% so that installation process will occur without any interruption.
It is recommended that you should take a backup of all your important personal data such as SMS, MMS, APN, contacts etc. to the external microSD card.
You must install your mobile’s drivers on PC. If you have installed Kies on your computer then you don’t need to install it separately.
Procedure to install Clockworkmod recovery on Samsung Galaxy S Plus I9001:
First download Odin v4.43 software and install it on your PC. It is necessary for flashing recovery on mobile.
Click here to download.
Download Clockworkmod recovery for Samsung Galaxy S Plus.
Also download AriesVE OPS file.
Now you have to boot your mobile into downloading mode. For that, first switch off your mobile then press & hold volume down + power button + home button simultaneously until it shows downloading message on your screen.
Now connect mobile to PC via USB cable.
Launch Odin software which you have installed previously on your PC. You will see Added!! message in Odin’s message box. If you won’t get this message make sure that you have installed mobile drivers properly.
Now click on the OPS button and then select AriesVE OPS file.
Click One Package button on Odin and select cwm6032-ariesve-touch-odin.tar file which you have downloaded earlier.
Ensure that Auto-Reboot and F.Resest Time is checked. Make sure that you haven’t clicked anywhere else.
Hit start button to flash recovery on mobile. After successful installation of recovery your mobile rebooted automatically. At the same time you will get pass message in Odin’s message box.
However if you mobile get stuck or you get a fail message then exit the Odin, disconnect mobile from computer, remove battery and re-insert it and follow the above procedure again.
Well done! Clockworkmod Recovery is now installed on your Samsung Galaxy S Plus I9001. Do let us know how it is working. If you any query regarding this article, you can ask us freely. We will try our level best to solve it.
Note: For entering into Clockworkmod recovery press & hold volume up + power button + home button simultaneously.
Click to expand...
Click to collapse
After 30 minutes of waiting I unppluged mobile and turn it off. After rebooting I saw icon of mobile and computer with yellow triangle with exclamation mark. After working with this once more I go to download mode and now is more than next 30 minutes...
[
Odin massages:/FONT]
Download Start...
<0> Create File...
<1> StartThread Detected : 1
<2> StartThread Detected : 0
<3> StartThread Detected : 0
<4> StartThread Detected : 0
<5> StartThread Detected : 0
<6> StartThread Detected : 0
<7> StartThread Detected : 0
<8> StartThread Detected : 0
<1> setup connection...
<1> odin mode.. check plcatform verification.
<1> VerifyPlatform:V0, P0,R0
<1> START!!!
<1> set download environment.
<1> recovery.img download..
Click to expand...
Click to collapse

I waited for 50 minutes and turn off installation. Tryied 3 more times, only detecting wrong port if I try to change USB. What to do with this now?

Try the same with this. It'll be ok
NB: This is for i9001 only. Please don't try this in other devices.

It worked instantlly! Thank you very much!:good: Now I go to install CyanogenMod.

first sorry for my bad english
i tried 6.0.1.1 but after 20 min half get green but do nothing....what should i do? may i still waiting?
...i tried CWM 6.0.2.8 and its ok now
thx

Restarted with sim card

Hello everyone, i have a Galaxy S Plus, i flashing with 2.3.6 Gingerbread without sim card, after installation with odin multi downloader with AriesVe.ops file i tryed insert the sim card but it was restarted or power off., but without sim card it's perfectlly, no problems, no restarts, no anything.
In recovery mode it displays status " >>> status = 00 >> and i have a option "install fota", please help me and sorry for my english.

Happy? said:
Hello everyone, i have a Galaxy S Plus, i flashing with 2.3.6 Gingerbread without sim card, after installation with odin multi downloader with AriesVe.ops file i tryed insert the sim card but it was restarted or power off., but without sim card it's perfectlly, no problems, no restarts, no anything.
In recovery mode it displays status " >>> status = 00 >> and i have a option "install fota", please help me and sorry for my english.
Click to expand...
Click to collapse
download the i9001 firmware from here for your region and flash again with ariesVe.ops
Check this out! Links to useful Guides and " Banned " Documentaries ​

flashing with sim card or without ? thanks.

Happy? said:
flashing with sim card or without ? thanks.
Click to expand...
Click to collapse
you can flash with SIM Card, its not a problem. Its possible the earlier ROM you flashed could have been corrupted.
Check this out! Links to useful Guides and " Banned " Documentaries ​

Thanks, i try this now but i have a problem. i try connect my galaxy to odin and recived a error port..i tryed other port usb and i have two yellow box in odin(can see in attache file). i tryed closed the odin and reopen but when open odin without connect my phone first yellow box recived a message: added, and after connect my phone displays a second yellow box. the process runs in a second box.
I have again same problem with sim card, restarted restarted.. please...help me.
p.s: i search my region for firmware but i not found. my region is romania, i tryed germany because is close.
please help me.
with respect.

Happy? said:
but when open odin without connect my phone first yellow box recived a message: added, and after connect my phone displays a second yellow box. the process runs in a second box.
Click to expand...
Click to collapse
I think you need to try with another PC or laptop, as com port should not connect when nothing is connected.
also charge you phone fully and KILL KIES, using task manager when flashing
Check this out! Links to useful Guides and " Banned " Documentaries ​

i try this, man, i uninstall the kies, now open two yellow box.
i restart my laptop, i connect my samsung in download mode to pc, i open the odin, message: added, detected, i upload .ops file and trd.md5 file and start, but recived error port, swich the port added also yellow box..and this is problem..
Download Start...
<0> Create File...
<1> StartThread Detected : 1
<2> StartThread Detected : 1
<3> StartThread Detected : 0
<4> StartThread Detected : 0
<5> StartThread Detected : 0
<6> StartThread Detected : 0
<7> StartThread Detected : 0
<8> StartThread Detected : 0
<1> setup connection...
<1> odin mode.. check plcatform verification.
<1> VerifyPlatform:V0, P0,R0
<1> START!!!
<1> set download environment.
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> amss.mbn download..
<1> 1/7 Finished.
<1> adsp.mbn download..
<2> --- cannot open the usb serial port. code: 2
<1> 2/7 Finished.
<1> boot.img download..
<1> 3/7 Finished.
<1> system.img.ext4 download..
<1> 4/7 Finished.
<1> cache.img.ext4 download..
<1> 5/7 Finished.
<1> recovery.img download..
<1> 6/7 Finished.
<1> preload.img.ext4 download..
<1> 7/7 Finished.
<1> reset pda..
<0> Started Timer
<1> Close serial port and wait until rebooting.
<2> Download Error (transfer)..
Click to expand...
Click to collapse

Happy? said:
i try this, man, i uninstall the kies, now open two yellow box.
i restart my laptop, i connect my samsung in download mode to pc, i open the odin, message: added, detected, i upload .ops file and trd.md5 file and start, but recived error port, swich the port added also yellow box..and this is problem..
Click to expand...
Click to collapse
download the Odin 4.43 as well as aries VE.ops file from another source and try.
Check this out! Links to useful Guides and " Banned " Documentaries ​

i try and this..not work..

Odin 4.43 , Odin 4.43 with SMD + Aries Ve.ops
attached

i try and this..not working. i have a question. why working without sim ? exist a possibil option to be change this error?

Happy? said:
i try and this..not working. i have a question. why working without sim ? exist a possibil option to be change this error?
Click to expand...
Click to collapse
Good question, but honestly have no idea as first time, I heard of this problem, where Odin connects without having phone attached.
But I would like to know
1) Is your IMEI still available when you flash without SIM card?
2) Did you get this phone recently? was this SIM blocked by Network or original owner?
read this for clarification
Check this out! Links to useful Guides and " Banned " Documentaries ​

I try flashing on other pc and odin i worked perfectly (just one box) but i have again sim card problem.
I try the custom room, again.. reboot when insert sim card.
Do you think that problem be solved with unroot? My phone is root..

Happy? said:
I try flashing on other pc and odin i worked perfectly (just one box) but i have again sim card problem.
I try the custom room, again.. reboot when insert sim card.
Do you think that problem be solved with unroot? My phone is root..
Click to expand...
Click to collapse
can you try flashing with the SIM card inside ( just check your sim card is inserted without force and no pins are damaged ( i know difficult to see that)
Check this out! Links to useful Guides and " Banned " Documentaries ​

[Q][HELP] i9001 can't enter recovery after flashing TWRP

Hi all,
I wanted to change the rom on my i9001 to EHNDROIX and I read in the forum (here: http://forum.xda-developers.com/showthread.php?t=2590896&page=3) that I should change the recovery to twrp, so I downloaded the zip file and put it onto the sdcard just as I used to in case of any rom update. I installed the recovery in recvery mode. After the installation the phone boot without any problem but I can't reach recovery. I'm able to boot to download mode so I tried to revert back to cwm recovery with Odin, but odin stuck on verifying platform.
Now I don't know what to do.
I updated the USB drivers, redownloaded ariesve.ops, odin, but it didn't helped.
Please help me getting back to recovery!
Thanks,

deadakos said:
but odin stuck on verifying platform.
Now I don't know what to do. ,
Click to expand...
Click to collapse
Look here [Tutorial][A.I.O. Rescue & Recovery] My Android Solutions. [Help & Troubleshooting], basically you need to kill KIES First and use the i9001 flashing guide
Check this out! Links to useful Guides and " Banned " Documentaries ​

xsenman said:
Look here [Tutorial][A.I.O. Rescue & Recovery] My Android Solutions. [Help & Troubleshooting], basically you need to kill KIES First and use the i9001 flashing guide
Thanks for your reply.
Of course I found this thread yesterday but I didn't understand why should I install an app from market to boot into recovery because my current rom, the unofficial slim support booting into recovery from the turn off menu.
So this morning I double checked everything what I read:
- check and kill kies (as kies is not installed, that was not an issue for me)
- check the usb cable (I used the Samsung cable, so that couldn't be a problem)
I made this morning the following :
- I turned off virus protection and firewall during the odin download process
- pluged the Samsung USB cable to one of the USB3 back port of my computer
- I run odin as administrator
- downloaded CWM touch recovery odin version 6.0.3.7 mentioned here: http://forum.xda-developers.com/wiki/Samsung_Galaxy_S_Plus/GT-I9001#Buttons
- I boot into download mode with the 3 button way
- Started the odin process with AriesVE.ops, one-package-ticked, recovery.tar.md5 loaded to one-package
Odin's messages were the following:
<1> recovery.img download..
<1> 1/1 Finished.
<1> reset pda..
<0> Started Timer
<1> Close serial port and wait until rebooting.
<1> PASS!!!
<0> Destroy instant..
<0> Killed timer
The process lasts for maximum 3-4 seconds, and my phone rebooted into the slim os. I tried to boot into recovery but after the SAMSUNG logo, I just see a black screen again.
I always try to search the forum for a solution as this time I did. I think I made everything carefully, as I used to change roms on my htc one x and on my i9000 quite often so I know that it is easy to make mistakes. I don't know what went wrong.
Please advise!
Is it possible that the bootloader is partially damaged? Know I don't dare to redownload bootloader via Odin not to completely kill my i9001 :/
What was strange all the time is that recovery downloads seemed to happen too fast.
Now the
Click to expand...
Click to collapse

deadakos said:
Please advise!
Is it possible that the bootloader is partially damaged? Know I don't dare to redownload bootloader via Odin not to completely kill my i9001 :/
What was strange all the time is that recovery downloads seemed to happen too fast.
Click to expand...
Click to collapse
Flash this recovery
i9001 CWM 6.0 for amss.mbn download.. problems with AriesVe.ops in Odin 4.43
i9001 Touch CWM 6.0
if cannot boot
Flash i9001 Boot.tar with AriesVe.ops in Odin 4.43
Check this out! Links to useful Guides and " Banned " Documentaries ​

xsenman said:
Flash this recovery
i9001 CWM 6.0 for amss.mbn download.. problems with AriesVe.ops in Odin 4.43
i9001 Touch CWM 6.0
if cannot boot
Flash i9001 Boot.tar with AriesVe.ops in Odin 4.43
Check this out! Links to useful Guides and " Banned " Documentaries ​
Click to expand...
Click to collapse
As I don't have amss.mbn problems I tried the second option where the link contained the ariesve.ops file together with cwm 6.0.1.0. Odin said that everything is ok, but I still couldn't boot into recovery.
Should I give a try to feamodrecovery, or try flashing the boot with the suggested boot.tar?
I searched the net for amss.mbn error, and I found a thread where you suggested to somebody to use an even older cwm for flashing. Do you think that I should also try it?
I don't want to bother you too much but I'm really clueless

xsenman said:
Flash this recovery
i9001 CWM 6.0 for amss.mbn download.. problems with AriesVe.ops in Odin 4.43
i9001 Touch CWM 6.0
if cannot boot
Flash i9001 Boot.tar with AriesVe.ops in Odin 4.43
Check this out! Links to useful Guides and " Banned " Documentaries ​
Click to expand...
Click to collapse
Is it possible to use adb to write recovery.img just as I have to do in case of the boot.img of my HTC One X every time I want to change rom?

deadakos said:
As I don't have amss.mbn problems I tried the second option where the link contained the ariesve.ops file together with cwm 6.0.1.0. Odin said that everything is ok, but I still couldn't boot into recovery.
Should I give a try to feamodrecovery, or try flashing the boot with the suggested boot.tar?
I searched the net for amss.mbn error, and I found a thread where you suggested to somebody to use an even older cwm for flashing. Do you think that I should also try it?
I don't want to bother you too much but I'm really clueless
Click to expand...
Click to collapse
It does not matter about amss.mbn as I am the one who wrote it for users to identify some issues. ( best avoid feamod recovery) , so go ahead and flash that recovery after that you can flash the boot.tar or a kernel meant for the ROM you have on your device.
Check this out! Links to useful Guides and " Banned " Documentaries ​

xsenman said:
It does not matter about amss.mbn as I am the one who wrote it for users to identify some issues. ( best avoid feamod recovery) , so go ahead and flash that recovery after that you can flash the boot.tar or a kernel meant for the ROM you have on your device.
Check this out! Links to useful Guides and " Banned " Documentaries ​
Click to expand...
Click to collapse
I flashed the cwm 6.0.1.0 with the enclosed ops as previously, just to be sure. After it, I turned off the phone, took out the battery, sd-card, sim card, and pushed the power button for at least 30 seconds, then put back only the battery. Then started odin as administrator, opened ops again, ticked one package, and choose the bootloader.tar. Booted into download mode by the three button method, connected to the computer with Samsung cable.
Pressed start, and odin stoped again on verifyplatform:
Download Start...
<0> Create File...
<1> StartThread Detected : 1
<2> StartThread Detected : 0
<3> StartThread Detected : 0
<4> StartThread Detected : 0
<5> StartThread Detected : 0
<6> StartThread Detected : 0
<7> StartThread Detected : 0
<8> StartThread Detected : 0
<1> setup connection...
<1> odin mode.. check plcatform verification.
<1> VerifyPlatform:V0, P0,R0
I'm in a vicious circle

I read here:
http://androidsansar.wordpress.com/...overy-for-the-galaxy-s-plus-i9001-using-odin/
and here also:
http://forum.xda-developers.com/showthread.php?t=2204700&page=22
to put the recovery tar.md5 to pda in Odin.
Could this be the reason why I can't flash recovery correctly?

deadakos said:
ticked one package, and choose the bootloader.tar. Booted into download mode
I'm in a vicious circle
Click to expand...
Click to collapse
well obviously, you are missing the point here, Odin has specific locations, for single files like recovery, modem phone, it should be selected as "PDA" for Bootloader it is seelcted under "BOOT" and when a full ROM is integrated as a single file, it is selected as a "SINGLE PACKAGE"
Check this out! Links to useful Guides and " Banned " Documentaries ​

Pfff, now it is completly bricked...
Maybe I'm stupid and did something wrong, but I rooted this phone, and it was not the first one, and I used it and changed roms for more than one year, and now only black screen awaits when pushing the power button.
I made a screenshot about odin, would you please check what did I wrong?
First I flashed the suggested recovery put into PDA. After it, because I still couldn't boot into recovery, I flashed bootloader put into boot section, just as on the attached screenshot.
Is there any chance to wake my phone up? JTAG?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Here is Odin's last message list:
Download Start...
<0> Create File...
<1> StartThread Detected : 1
<2> StartThread Detected : 0
<3> StartThread Detected : 0
<4> StartThread Detected : 0
<5> StartThread Detected : 0
<6> StartThread Detected : 0
<7> StartThread Detected : 0
<8> StartThread Detected : 0
<1> setup connection...
<1> odin mode.. check plcatform verification.
<1> VerifyPlatform:V0, P0,R0
<1> START!!!
<1> set download environment.
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> partition.bin download..
<1> 1/4 Finished.
<1> dbl.mbn download..
<1> 2/4 Finished.
<1> osbl.mbn download..
<1> 3/4 Finished.
<1> EMMCBOOT.MBN download..
<1> 4/4 Finished.
<1> reset pda..
<0> Started Timer
<1> Close serial port and wait until rebooting.
<1> PASS!!!
<0> Destroy instant..
<0> Killed timer

deadakos said:
Is there any chance to wake my phone up? JTAG?
Click to expand...
Click to collapse
Is download mode possible? the image and flash seems good, only thing I can think of, is your power( battery ran out) which would cause such an issue like totally dead. Look in [Tutorial][A.I.O. Rescue & Recovery] My Android Solutions. [Help & Troubleshooting] about getting download mode , likely with USB JIG, failing which it should be recoverable by JTAG, (unless you have a internal SD card problem that has been the issue all along)
Check this out! Links to useful Guides and " Banned " Documentaries ​

xsenman said:
Is download mode possible? the image and flash seems good, only thing I can think of, is your power( battery ran out) which would cause such an issue like totally dead. Look in [Tutorial][A.I.O. Rescue & Recovery] My Android Solutions. [Help & Troubleshooting] about getting download mode , likely with USB JIG, failing which it should be recoverable by JTAG, (unless you have a internal SD card problem that has been the issue all along)
Check this out! Links to useful Guides and " Banned " Documentaries ​
Click to expand...
Click to collapse
No, nothing is possible at this moment. I don't think that the battery is the reason as it was fully charged before the flashing process, and my device was turned on for maximum 15 minutes. Just to be sure I connected it to the cord, but even the loading process doesn't start.

deadakos said:
No, nothing is possible at this moment. I don't think that the battery is the reason as it was fully charged before the flashing process, and my device was turned on for maximum 15 minutes. Just to be sure I connected it to the cord, but even the loading process doesn't start.
Click to expand...
Click to collapse
Now it is official, the phone is dead. It had hardware problems. RIP!
Thanks for your help!