Related
Hello!
I've been flashing stock ROM for my ACE via ODIN. then I had a cut. hopefully the phone can get in download mode. but when i start normally there's a message of phone with a yellow sign trying to connect to computer. ODIN is STUCK with this message:
<1> START!!!
<1> set download environment.
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> mibib download..
PLEASE HELP ASAP! because one can not live without his ACE !
Samadony said:
Hello!
I've been flashing stock ROM for my ACE via ODIN. then I had a cut. hopefully the phone can get in download mode. but when i start normally there's a message of phone with a yellow sign trying to connect to computer. ODIN is STUCK with this message:
<1> START!!!
<1> set download environment.
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> mibib download..
PLEASE HELP ASAP! because one can not live without his ACE !
Click to expand...
Click to collapse
Try doing to Download Mode combo.. (Vol- Home Power) then hit start.
Luckier than me, the stock ROM I flashed through Ace had a corrupt boot.img- happy hard brick
So i press vol down & home & power! that's what i;ve been doing.
did you solve it ?
a yellow exclamation mark between a pc and phone icon is it?
try this.
take off battery, let the phone stay for around 10 seconds, press the three button combination for download mode (the home+vol down+power) and while u still holding those three button reinsert the battery. now device should go into download mode and u can properly flash with odin.
an0nym0us_ said:
a yellow exclamation mark between a pc and phone icon is it?
try this.
take off battery, let the phone stay for around 10 seconds, press the three button combination for download mode (the home+vol down+power) and while u still holding those three button reinsert the battery. now device should go into download mode and u can properly flash with odin.
Click to expand...
Click to collapse
Yes it's YELLOW mark.
I'll give it a try now, Hope it works because i really need to use it since I've an emergency.
EDIT: SAME stuck in mibib download, what's the mibib download??
crap.. forgot to mention.. while u do it, it shouldnt be connected to pc. only connect it to pc after it had succesfully go into download mode.
---------- Post added at 11:37 PM ---------- Previous post was at 11:32 PM ----------
Samadony said:
Yes it's YELLOW mark.
I'll give it a try now, Hope it works because i really need to use it since I've an emergency.
EDIT: SAME stuck in mibib download, what's the mibib download??
Click to expand...
Click to collapse
did u manage to force it into download mode by the step i said earlier?
flashing the phone while its still showing the error exclamation screen wont work.
an0nym0us_ said:
crap.. forgot to mention.. while u do it, it shouldnt be connected to pc. only connect it to pc after it had succesfully go into download mode.
Click to expand...
Click to collapse
Have you tried this sucessfully before? ..
trying one more time. thanks for ur help.
Samadony said:
Have you tried this sucessfully before? ..
trying one more time. thanks for ur help.
Click to expand...
Click to collapse
yes, i've got the same error exclamation screen before and i did personally test the force into download mode trick
I downloaded another stock rom to see if it's not from the other Stock i'm flashing but the one i'm flashing i'm sure 100% it's working...the new one have 3 .tar.md5 files here's the names:
APBOOT_S5830JPKP9_CL457554_REV03_user_low_true.tar.md5
CODE_S5830JPKP9_CL457554_REV03_user_low_true.tar.md5
GT-S5830-MULTI-CSC-OJPKP3.tar.md5
1. this isnot a one package stock?
2. shall i try another ODIN version
3. shall this be due to the OPS file?
an0nym0us_ said:
yes, i've got the same error exclamation screen before and i did personally test the force into download mode trick
Click to expand...
Click to collapse
Would you link me the stock you've flashed?
ughh u havent answered my earlier question yet. did u manage to force it into download mode by the step i instructed?
it doesnt matter which rom u download, which odin version u try, it wont work while its still showing the exclamation error screen.
an0nym0us_ said:
crap.. forgot to mention.. while u do it, it shouldnt be connected to pc. only connect it to pc after it had succesfully go into download mode.
---------- Post added at 11:37 PM ---------- Previous post was at 11:32 PM ----------
did u manage to force it into download mode by the step i said earlier?
flashing the phone while its still showing the error exclamation screen wont work.
Click to expand...
Click to collapse
Yes i did manage to force it into download mode, but still stuck in ODIN ! Crap. trying again and re informing you.
now the exclamation error solved, proceed with odin.
usually the stuck in odin caused by kies running in background. open windows task manager and kill kies process. and then open odin with administrator priviledge.
if its still doesnt work try on other pc.
an0nym0us_ said:
ughh u havent answered my earlier question yet. did u manage to force it into download mode by the step i instructed?
it doesnt matter which rom u download, which odin version u try, it wont work while its still showing the exclamation error screen.
Click to expand...
Click to collapse
1. i press the Vol down + home + power with no battery,
2. insert the battery while pressing
3. it automatically shows no screen but the downloading mode. (so i forced it to download)
4. i connect the cable to laptop
5. flash using odin, and still getting "mbib download..."
an0nym0us_ said:
now the exclamation error solved, proceed with odin.
usually the stuck in odin caused by kies running in background. open windows task manager and kill kies process. and then open odin with administrator priviledge.
if its still doesnt work try on other pc.
Click to expand...
Click to collapse
I've been trying this with no Kies, no SIM card and no SD-card.
trying on another laptop.
btw if your in windows vista or 7, disable windows uac control. that too can cause odin problem.
and u mention that u try without kies installed. make sure u had samsung's usb driver installed.
an0nym0us_ said:
btw if your in windows vista or 7, disable windows uac control. that too can cause odin problem.
and u mention that u try without kies installed. make sure u had samsung's usb driver installed.
Click to expand...
Click to collapse
ODIN reads my phone, i think then i have the USB Driver. I'm trying on another laptop now. hope it works.
an0nym0us_ said:
btw if your in windows vista or 7, disable windows uac control. that too can cause odin problem.
and u mention that u try without kies installed. make sure u had samsung's usb driver installed.
Click to expand...
Click to collapse
1. forced download
2. UAC is disabled
3. no kies
4. don't konw about Samsung USB driver if installed or no, but searching for that
5. it's been 5 mins and says mbib crap download.
what's wrong!??
EDIT: used ODIN as adminstrator, now it's stuck with setup connection? is that a driver issue?
u mention that odin can detect the phone, that proves u already had the driver installed.
but in case u want it, here u go. the standalone usb driver without kies crap.
https://hotfile.com/dl/141204140/576b45c/SAMSUNG_Mobile_Phones_USB_Driver.rar.html
and if the archive ask for password, its
Code:
samfirmware.com
Now I've made what you said, carefully. still Stuck in ODIN:
Download Start...
<0> Create File...
<1> StartThread Detected : 1
<2> StartThread Detected : 0
<3> StartThread Detected : 0
<4> StartThread Detected : 0
<5> StartThread Detected : 0
<6> StartThread Detected : 0
<7> StartThread Detected : 0
<8> StartThread Detected : 0
<1> setup connection...
<1> odin mode.. check plcatform verification.
<1> VerifyPlatform:V0, P0,R0
<1> START!!!
<1> set download environment.
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> mibib download.. << freeze here
HELLP!! i am trying to update my moms S Plus I9001 to a newer Nordic version (i9001xxkqg) using Odin (Multi Downloader v4.43) and it stops on AMSS.mbn!! How do i fix this! i am on my cabin now with only one PC. so do you have a any idea???
Here is what Odin says.
Download Start...
<0> Create File...
<1> StartThread Detected : 1
<2> StartThread Detected : 0
<3> StartThread Detected : 0
<4> StartThread Detected : 0
<5> StartThread Detected : 0
<6> StartThread Detected : 0
<7> StartThread Detected : 0
<8> StartThread Detected : 0
<1> setup connection...
<1> odin mode.. check plcatform verification.
<1> VerifyPlatform:V0, P0,R0
<1> START!!!
<1> set download environment.
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> amss.mbn download..
(After 100 minutes)
I have tried many Odin versions but, only 4.43 works with (I9001 S Plus) And i have put the AriesVe.Ops in the Ops place and the Firmware in the One Package. And now my phone displays a yellow triangle and i cant turn it on!! plzzz help!! Plzzz!
I guess my phone is bricked.
Plzzz, help me.
Eirik2306 said:
Plzzz, help me.
Click to expand...
Click to collapse
1) remove battery and reinsert
2) go into download mode
3) ensure you got the correct Firmware and restart Odin
4) select location of files according to Firmware ( single file in PDA )
5) unchecked the " protect ops file" box on the Odin screen before starting
That should do it
Yeah.. Follow the above steps and you are good to go...
If my post helped, don't mind hitting THANKS ;-)
xsenman said:
1) remove battery and reinsert
2) go into download mode
3) ensure you got the correct Firmware and restart Odin
4) select location of files according to Firmware ( single file in PDA )
5) unchecked the " protect ops file" box on the Odin screen before starting
That should do it
Click to expand...
Click to collapse
That does not work for me, At the pda it says: wrong image type.
but it doensn't work at any way with protect ops on/off, and not with pda or one package.
can anyone help me?
jeantje said:
That does not work for me, At the pda it says: wrong image type.
but it doensn't work at any way with protect ops on/off, and not with pda or one package.
can anyone help me?
Click to expand...
Click to collapse
ok, lets try this again
First remove battery and reinsert
1) "Select OPS" AriesVE.ops
2) Unzip/unrar the ROM you are flashing.
If it's a single .tar.md5 file, check the option "One Package" in Odin and then load the .tar.md5 file using the One Package button at the very bottom. Odin will load it and check the MD5 checksum. and should be over in ten minutes
If your ROM consists of several .smd files,
Select Boot_loader.tar under BOOT
Select Modem under PHONE
Select PDA under PDA
Select CSC under CSC .
Press Start, Flashing should take about 10 minutes
If it fails, than try again with protect ops unchecked
:'(
xsenman said:
ok, lets try this again
First remove battery and reinsert
1) "Select OPS" AriesVE.ops
2) Unzip/unrar the ROM you are flashing.
If it's a single .tar.md5 file, check the option "One Package" in Odin and then load the .tar.md5 file using the One Package button at the very bottom. Odin will load it and check the MD5 checksum. and should be over in ten minutes
If your ROM consists of several .smd files,
Select Boot_loader.tar under BOOT
Select Modem under PHONE
Select PDA under PDA
Select CSC under CSC .
Press Start, Flashing should take about 10 minutes
If it fails, than try again with protect ops unchecked
Click to expand...
Click to collapse
hello, i'm dealing with the same situation :/
after unchecking the "protect ops" it goes as far as the "big partition size" error message and stalls again...
really really in need of help guys... :/
aspetos said:
hello, i'm dealing with the same situation :/
after unchecking the "protect ops" it goes as far as the "big partition size" error message and stalls again...
really really in need of help guys... :/
Click to expand...
Click to collapse
jeantje problem was solved by re downloading the Aries.ops from another source as samfirmwares was corrupted
xsenman said:
jeantje problem was solved by re downloading the Aries.ops from another source as samfirmwares was corrupted
Click to expand...
Click to collapse
xsenman do you have a direct link of Aries.ops that works? ty
aspetos said:
xsenman do you have a direct link of Aries.ops that works? ty
Click to expand...
Click to collapse
try this, have not checked it as, I use different phone
CWM For flashing with Odin: http://www.mediafire.com/?jg0jjdg8amjlj3b
AriesVe.ops http://www.mediafire.com/?ikx8iz8arzabx1h
xsenman said:
try this, have not checked it as, I use different phone
CWM For flashing with Odin: mediafire com/ ?jg0jjdg8amjlj3b
AriesVe.ops mediafire com/ ?ikx8iz8arzabx1h
Click to expand...
Click to collapse
Is it normal that it now seems to be on "recovery.img download" for like 9 minutes?
I used the above CWM For flashing with Odin, AriesVE.ops and provided Odin version (verified same odin version was used as previous attempts).
The "Protect OPS" check box is checked, right?
aspetos said:
Is it normal that it now seems to be on "recovery.img download" for like 9 minutes?
I used the above CWM For flashing with Odin, AriesVE.ops and provided Odin version (verified same odin version was used as previous attempts).
The "Protect OPS" check box is checked, right?
Click to expand...
Click to collapse
minimum time is not less than 10 min, so give it time, yes protect ops should be checked, inly If failed than try unchecked
I solved this problem with BroodROM RC5 all-in-one tar file, here is what I did:
A) Remove the .md5 extension and make it .tar
B) Use other USB port
C) Remove KIES and downloaded standalone drivers pack
D) Sit back and waited for 30 minutes until flashing complete
xsenman said:
minimum time is not less than 10 min, so give it time, yes protect ops should be checked, inly If failed than try unchecked
Click to expand...
Click to collapse
23 minutes and counting...
just to check, nothing moves on the phone screen (like a bar indicator)
Is that normal?
aspetos said:
23 minutes and counting...
just to check, nothing moves on the phone screen (like a bar indicator)
Is that normal?
Click to expand...
Click to collapse
hmm, think its stuck, do a battery pull to get out of it and you can try darristan suggestion
xsenman said:
hmm, think its stuck, do a battery pull to get out of it and you can try darristan suggestion
Click to expand...
Click to collapse
tried with the "Protect OPS" unchecked (just in case), left it a fair 10+ minutes, no indication, etc...
I'll try darristan suggestion. But excuse me for asking to be a bit more elaborate as far as steps are concerned, it's like 7:30 AM here and had a long night...
Is there a post relative to darristan downloads and/or procedures?
ty
aspetos said:
tried with the "Protect OPS" unchecked (just in case), left it a fair 10+ minutes, no indication, etc...
I'll try darristan suggestion. But excuse me for asking to be a bit more elaborate as far as steps are concerned, it's like 7:30 AM here and had a long night...
Is there a post relative to darristan downloads and/or procedures?
ty
Click to expand...
Click to collapse
here http://forum.xda-developers.com/showthread.php?p=20392786
darristan said:
I solved this problem with BroodROM RC5 all-in-one tar file, here is what I did:
A) Remove the .md5 extension and make it .tar
B) Use other USB port
C) Remove KIES and downloaded standalone drivers pack
D) Sit back and waited for 30 minutes until flashing complete
Click to expand...
Click to collapse
unfortunately no luck either...
stuck on amss.mbn download again, with out any indicators on the phone screen...
am i properly foobared?
aspetos said:
unfortunately no luck either...
stuck on amss.mbn download again, with out any indicators on the phone screen...
am i properly foobared?
Click to expand...
Click to collapse
Suggest you read the i9001 WIKI http://forum.xda-developers.com/wiki/Samsung_Galaxy_S_Plus/GT-I9001#Flashing to check, if there is anything you may or may not be doing.
please help..!!!
my galaxy mini s-5570 from ornge uk (network locked).. got bricked. i can get into download mode and ramdump mode.
as i can get into download mode i tried to flash stock roms with odin ...every time odin detects phone and flashes successfully and PASSES ... but after the step "close serial port and wait untill reboot" my phone starts blinking again and not booting up.
i tried many stock roms i found here but all ending up the same way. i dont know what to do now...
phone can still get into download mode...
when i simply turn the phone on the samsung logo is blinking on the screen
please help me.. i dont know if it is because i am flshing wrong ROM or what? if so please provide me the proper rom for GALAXY MINI S-5570 ORANGE UK..PLEASE...
if it say pass mean all is gone in the right way so is good that you can go into download mode cuz you can flash a custom recovery with odin and with a custom recovery you can flash a new rom...like cm7 and you can see if the phone bootup
Sent from my GT-S5570 using xda premium
I had something similar. Try to find a multi package 2.2.1. It's not easy, but if you can flash that, it will reboot (at least for me)
here the link for 2.2.1 froyo
http://www.youtube.com/watch?v=7mv5d1q4Bfo
ok try thos also complete guide + 2.2.1 packages
http://www.sleetherz.com/2011/10/how-can-i-switch-back-my-galaxy-mini-to-default-froyo-2-2-1/
Sent from my GT-S5570 using xda premium
galaxy mini soft brick...
MAD_psycho_Zz said:
here the link for 2.2.1 froyo
ok try thos also complete guide + 2.2.1 packages
Sent from my GT-S5570 using xda premium
Click to expand...
Click to collapse
thank you for replying to my post...
but i tried the froyo with multiple files but still the same thing happening..
after "close serial port....." message. phone screen starts blinking ...not rebooting.. HERE IS WHAT I GOT WHEN I TRIED ONE MULTI FILE FIRM WARE...... S5570_XXKB1
Download Start...
<0> Create File...
<1> StartThread Detected : 0
<2> StartThread Detected : 1
<3> StartThread Detected : 0
<4> StartThread Detected : 0
<5> StartThread Detected : 0
<6> StartThread Detected : 0
<7> StartThread Detected : 0
<8> StartThread Detected : 0
<2> setup connection...
<2> odin mode.. check plcatform verification.
<2> VerifyPlatform:V0, P0,R0
<2> START!!!
<2> set download environment.
<2> big partition size!!
<2> big partition size!!
<2> big partition size!!
<2> big partition size!!
<2> big partition size!!
<2> mibib download..
<2> 1/10 Finished.
<2> qcsbl download..
<2> 2/10 Finished.
<2> oemsbl download..
<2> 3/10 Finished.
<2> amss download..
<2> 4/10 Finished.
<2> arm11boot download..
<2> 5/10 Finished.
<2> boot.img download..
<2> 6/10 Finished.
<2> recovery.img download..
<2> 7/10 Finished.
<2> system.rfs download..
<2> 8/10 Finished.
<2> data.rfs download..
<2> 9/10 Finished.
<2> csc.rfs download..
<2> 10/10 Finished.
<2> reset pda..
<0> Started Timer
<2> Close serial port and wait until rebooting.
<2> PASS!!!
<0> Destroy instant..
<0> Killed timer
BUT AFTER close serial port and wait untill rebooting my phone just starts blinking ..
please help
Remove sim card, memory card.
Flash a stock firmware which has all the 4 files + .ops file.
After pass.
Pull battery out.
Put it back in.
Go into recovery.(Home+Power)
Clear User data and cache
Reboot.
chemicalrage said:
Remove sim card, memory card.
Flash a stock firmware which has all the 4 files + .ops file.
After pass.
Pull battery out.
Put it back in.
Go into recovery.(Home+Power)
Clear User data and cache
Reboot.
Click to expand...
Click to collapse
i took out battery and after puting it back i tried to go into recovery but not going in to recovery as before ...only download mode and ramdump mode are available
how strange...:/ try flashing froyo with the guide above...then flash stock gingerbread then flash a cwm recovery with odin and then try going into recovery mode and do a full wipe(cache data dalvik cache battery stats and format system in mount and storage menu) if u can do it mount usb from recovery put a custom rom into your sd flash it wipe data and cache again and reboot hopeing your phone will boot...
MAD_psycho_Zz said:
how strange...:/ try flashing froyo with the guide above...then flash stock gingerbread then flash a cwm recovery with odin and then try going into recovery mode and do a full wipe(cache data dalvik cache battery stats and format system in mount and storage menu) if u can do it mount usb from recovery put a custom rom into your sd flash it wipe data and cache again and reboot hopeing your phone will boot...
Click to expand...
Click to collapse
is there any possibility that it is stuck at boot screen because of files left behind by previous roms...? in tht case is there any tool to wipe the partitions before flashing (as i can not go into recovery mode the usual way of wiping is impossible)?
Now my phone is totally bricked....!!!!!
jaizkt said:
is there any possibility that it is stuck at boot screen because of files left behind by previous roms...? in tht case is there any tool to wipe the partitions before flashing (as i can not go into recovery mode the usual way of wiping is impossible)?
Click to expand...
Click to collapse
now...my phone is totally bricked.....!!!!!!!!!!!!!!!!!! AS I tried to flash the file "arm11boot" as boot file in odin (as told by some person in this forum...)
and now i dont have anything except a blank screen... USB JIG is also not working..... SO MY ADVICE TO ALL....PLEASE DONT FLASH THAT BOOT FILE USING ODIN IT WILL JUST BRICK YOUR PHONE... DONT REMEMBER THE NAME OF THAT PERSON WHO SUGGESTED IT..
TODAY I LEFT MY PHONE AT SAMSUNG SERVICE FOR GETTING MY MOTHERBOARD CHANGED....its bit costly (3800 indian rupees)... but i dont want to make my phone my paper weight...so....
jaizkt said:
now...my phone is totally bricked.....!!!!!!!!!!!!!!!!!! AS I tried to flash the file "arm11boot" as boot file in odin (as told by some person in this forum...)
and now i dont have anything except a blank screen... USB JIG is also not working..... SO MY ADVICE TO ALL....PLEASE DONT FLASH THAT BOOT FILE USING ODIN IT WILL JUST BRICK YOUR PHONE... DONT REMEMBER THE NAME OF THAT PERSON WHO SUGGESTED IT..
TODAY I LEFT MY PHONE AT SAMSUNG SERVICE FOR GETTING MY MOTHERBOARD CHANGED....its bit costly (3800 indian rupees)... but i dont want to make my phone my paper weight...so....
Click to expand...
Click to collapse
that's the bootloader u shouldn't play with it
The person who told you about the bootloader should be banned from xda. I swear what a jackass.
Messi10 said:
that's the bootloader u shouldn't play with it
Click to expand...
Click to collapse
Dear Messi,
i have done all the above successfully, including rooting with odin and installing cwm recovery.
but now on trying to install a custom rom it is stuck on android logo screen. after restoring to the stock rom, it gets stuck to samsung galaxy logo screen
pls help.. its urgent and its my sis in laws phone..
thanks in advance..
Bhupen Gaitonde said:
Dear Messi,
i have done all the above successfully, including rooting with odin and installing cwm recovery.
but now on trying to install a custom rom it is stuck on android logo screen. after restoring to the stock rom, it gets stuck to samsung galaxy logo screen
pls help.. its urgent and its my sis in laws phone..
thanks in advance..
Click to expand...
Click to collapse
Try wiping from CWM.
I got an ide a but Dino if this would work
if you could go to recovery mode that's good
get your SD card out and put it in your PC then download a ROM and then put it in the SD card after that put the SD card back to your phone and go to recovery and flash it like normal and don't forget to wipe
I Duno if this will work
edit:woops I think I'm late
Sent from my GT-S5570 using xda premium
jaizkt said:
now...my phone is totally bricked.....!!!!!!!!!!!!!!!!!! AS I tried to flash the file "arm11boot" as boot file in odin (as told by some person in this forum...)
and now i dont have anything except a blank screen... USB JIG is also not working..... SO MY ADVICE TO ALL....PLEASE DONT FLASH THAT BOOT FILE USING ODIN IT WILL JUST BRICK YOUR PHONE... DONT REMEMBER THE NAME OF THAT PERSON WHO SUGGESTED IT..
TODAY I LEFT MY PHONE AT SAMSUNG SERVICE FOR GETTING MY MOTHERBOARD CHANGED....its bit costly (3800 indian rupees)... but i dont want to make my phone my paper weight...so....
Click to expand...
Click to collapse
You paid a visit to Samsung center.
Was the problem solved?
If Your devices brick with Blank screen. you can test my way.
Step 1. Pull out your battery, Remove Sd card and SIM card.
Step 2. Connect your phone to pc or charger (Charge without battery)
Step 3. Pres Vol Up + Down and power.
Step 4. Put your battery back, now if work your phone will charging.
Step 5. go to download mode now and flash it.
I try this because my phone bricked with CWM.
Sent from my GT-S5570 using xda app-developers app
Hi,
I got I9001 plus running stock 2.3.5 - I rooted the device successfully - post that i installed cwm v6 and even that was successful, however when i went to recovery i see that i am unable to select any option from home button or power button. When ever i press home button it just scrolls down and power button does nothing. I tried flashing recovery using odin - however odin doesnt detect my device even though i had all drivers, now i am stuck in recovery or download mode. Any suggestions?
Thanks.
innovat0r said:
however odin doesnt detect my device even though i had all drivers, now i am stuck in recovery or download mode. Any suggestions?
Thanks.
Click to expand...
Click to collapse
you can use My Android Solutions to solve it
But First powerdown, pull out Battery, SIM CARD, and EXT.SD card, press power button for a minute, than powerup without SIM and Ext.SD Card....
(Do remember to backup your contacts, data, images etc and also your EFS folder before flashing a ROM and make sure you have more than 50% battery charge before you attempt any sort of flashing.)
xsenman said:
you can use My Android Solutions to solve it
But First powerdown, pull out Battery, SIM CARD, and EXT.SD card, press power button for a minute, than powerup without SIM and Ext.SD Card....
(Do remember to backup your contacts, data, images etc and also your EFS folder before flashing a ROM and make sure you have more than 50% battery charge before you attempt any sort of flashing.)
Click to expand...
Click to collapse
Oding detects the device but when i select cwm .tar file in pda it says "invalid image type"
if odin detect your device it is easy !
There's a solution to this problem in this post.
webalfa said:
if odin detect your device it is easy !
There's a solution to this problem in this post.
Click to expand...
Click to collapse
Tried the above post
Thanks to everyony who hear my pray and tried to help whith my problem (bootloop into recovery). And Acro68 sorry that i'm bothered you. I here agan to publish the solution. Problem was in boot, like people on other forum says (it was damaged somehow).
Here is file, that need to be flash in Odin.
1. Go into Downloading mode
2. Select OPS - AriesVE.ops(Odin)
3. Select BOOT - Boot_loader.tar
4. Flash it and bootloop into recovery never gona happen.
Click to expand...
Click to collapse
but i am getting this message in odin :
<5> StartThread Detected : 0
<6> StartThread Detected : 0
<7> StartThread Detected : 0
<8> StartThread Detected : 0
<1> setup connection...
And its just not proceeding further after <1> setup connection...
now?
Install Samsung USB Drivers and connect device to another USB port , maybe help .
webalfa said:
Install Samsung USB Drivers and connect device to another USB port , maybe help .
Click to expand...
Click to collapse
Already tried, didnt help. Any other solution.
innovat0r said:
Already tried, didnt help. Any other solution.
Click to expand...
Click to collapse
look at My Android Solutions it has soultions for so many problems you may encounter
Problem:- Odin gets Stuck on <ID:0/008> Set PIT file. or <ID:0/003> SetupConnection.. or <ID:0/007> Removed!
Note:
When using Odin to Flash, Open task manager and close these : Kies.exe , KiesTrayAgent.exe, and KiesPDLR.exe
IF your downloaded File (.tar, .zip, .md5 .rar ) is corrupted, Odin could get stuck too, so download from another source, if it happens repeatedly
Hello everybody
I have tried to find something about getting the phone back to stock but with no success
Here is my problem :
I have changed the stock recovery and added 2 mods , old tv shutdown , and a battery mod . about 1 year ago
I think my phone has some hardware problems because it keeps shutting down for no apparent reason and it does this a few times a day and i want to take it back to Vodafone to be checked on warranty .
I want to retun it to the stock out of the box but i have problems finding how to restore the stock recovery , is there a way ?
Can i delete the 2 mods without flashing the whole ROM ?
Sorry if this topic is redundant with another but i didn't find it .
I have a samsung galaxy s plus i9001 Vodafone Romania
Other info :
2.3.5
base band : i9001BUKP1
version number GINGERBREAD.BUKP2
R: Back to Stock Recovery
You can find the stock recovery in the i9001 wiki page, bit i think that flashing it would be useless for your problem. You should do a nandroid backup before installing any mod...
Inviato dal mio frigo a pedali.
i have found the following information
Stock recovery
If for some reason you ever need to go back to stock recovery, wintel_mac has prepared a zip you can install in CWM or FeaMod:
9001_stock_recovery-signed.zip
Click to expand...
Click to collapse
But not sure how to use the file ...
I have made a back-up with Titanium before adding the 2 Modes .
fast way to get it back: Download you exact same firmware from sammobile.com and flash it with odin! you are back to very very stock! take it to vodafone and you are done!!
if you have putted some tweak on it this ethod will also remove it so you are totally sure about the warranty to be back! If you are rooted before perform this action download and flash from recovery the un-root zip from the guide!
for information about odin and this other stuff please refer to the guide! there is everything explained! If you have anymore dubts visit q&q i9001 thread inthe q&a section of the i9000 forum!
ok, so i changed the recovery now i have the stock one , i have made a recovery with Titanim and the old tv shud down has gone , but the batery MOD is still active , any ideea on how tk delete it ?
laurcapa said:
ok, so i changed the recovery now i have the stock one , i have made a recovery with Titanim and the old tv shud down has gone , but the batery MOD is still active , any ideea on how tk delete it ?
Click to expand...
Click to collapse
Download a same firmware and flash with Odin brother...the person one post before you already told you what to do ==
and now for some updates
I wanted to install cm9 and as required i had to install clockworkmod recovery , I've installl version v6.0.1.3 but i have a problem with it , it seems that the home button is not working properly , when i press it it just moves the cursor up, the button on the left moves it down ... read that is a touch recovery , but the touch is not working on it
I managed to soft-brick the phone because by mistake instade of a md5 rom i selected a zip by mistake, the phone showed the BSOD and the only mode it will entered was ROMDUMP ore something like that , but managed to get around by flashing boot_loader fond on the the forum, now the phone enters in download and recovery but i have a problem , because the recovery does not work i'm trying to flash anoter recovery using odin , but i does not start , i get the following log :
Download Start...
<0> Create File...
<1> StartThread Detected : 0
<2> StartThread Detected : 1
<3> StartThread Detected : 0
<4> StartThread Detected : 0
<5> StartThread Detected : 0
<6> StartThread Detected : 0
<7> StartThread Detected : 0
<8> StartThread Detected : 0
<2> setup connection...
<2> e - dll cannot setup connection with the target.
<0> Destroy instant..
<0> Killed timer
or there is another message
<7> StartThread Detected : 0
<8> StartThread Detected : 0
<1> setup connection...
<1> odin mode.. check plcatform verification.
<1> VerifyPlatform:V0, P0,R0
I am stuck , some advice on how to flash the current recovery ?
laurcapa said:
and now for some updates
I wanted to install cm9 and as required i had to install clockworkmod recovery , I've installl version v6.0.1.3 but i have a problem with it , it seems that the home button is not working properly , when i press it it just moves the cursor up, the button on the left moves it down ... read that is a touch recovery , but the touch is not working on it
I managed to soft-brick the phone because by mistake instade of a md5 rom i selected a zip by mistake, the phone showed the BSOD and the only mode it will entered was ROMDUMP ore something like that , but managed to get around by flashing boot_loader fond on the the forum, now the phone enters in download and recovery but i have a problem , because the recovery does not work i'm trying to flash anoter recovery using odin , but i does not start , i get the following log :
Download Start...
<0> Create File...
<1> StartThread Detected : 0
<2> StartThread Detected : 1
<3> StartThread Detected : 0
<4> StartThread Detected : 0
<5> StartThread Detected : 0
<6> StartThread Detected : 0
<7> StartThread Detected : 0
<8> StartThread Detected : 0
<2> setup connection...
<2> e - dll cannot setup connection with the target.
<0> Destroy instant..
<0> Killed timer
or there is another message
<7> StartThread Detected : 0
<8> StartThread Detected : 0
<1> setup connection...
<1> odin mode.. check plcatform verification.
<1> VerifyPlatform:V0, P0,R0
I am stuck , some advice on how to flash the current recovery ?
Click to expand...
Click to collapse
Maybe you're using a CWM with the menu button ?
And it's not true that you only can get in RAMDUMP mode. when your device is off. hold volume down + power until you see download mode, if that doesn't work try this:
quoted from my unbrick tutorial:
CHAPTER 3. Getting in Download Mode
If your Samsung Galaxy S Plus is (partially) bricked and you have BSOD:
1. Unplug your phone if its connected to your PC
2. Hold Vol UP + Vol Down + Power, the screen will flash black
3. Continue holding down all 3 buttons, you will see the BSOD screen again, continue holding all 3 buttons, the screen will flash black again
4. Release the power button only. This will put you into Download Mode
Don’t expect it to work the first time you try it. If it keeps failing try the alternative:
1. Start Odin Multi Downloader
2. Connect your phone (which is in BSOD) to the PC
3. Wait till Windows finished installing drivers and Odin recognized your phone
4. Hold Vol Down + Home + Power, once the black screen flashes, release the Power button. This will put you into Download Mode
If this also doesn’t work and you are getting nervous about your situation:
1. Go to DealXtreme, this small product of $1.60 can help getting in download mode instantly
2. Buy it and wait for it’s arrival (the shipping is free but it can take a few days, so you will have no phone at that time)
3. Now when your phone is off, plugin the jig and wait until it goes on, now it will go in download mode and you’re ready to go
oh and the odin bug is very common, just restart odin and try again
laurcapa said:
and now for some updates
I wanted to install cm9 and as required i had to install clockworkmod recovery , I've installl version v6.0.1.3 but i have a problem with it , it seems that the home button is not working properly , when i press it it just moves the cursor up, the button on the left moves it down ... read that is a touch recovery , but the touch is not working on it
I managed to soft-brick the phone because by mistake instade of a md5 rom i selected a zip by mistake, the phone showed the BSOD and the only mode it will entered was ROMDUMP ore something like that , but managed to get around by flashing boot_loader fond on the the forum, now the phone enters in download and recovery but i have a problem , because the recovery does not work i'm trying to flash anoter recovery using odin , but i does not start , i get the following log :
Download Start...
<0> Create File...
<1> StartThread Detected : 0
<2> StartThread Detected : 1
<3> StartThread Detected : 0
<4> StartThread Detected : 0
<5> StartThread Detected : 0
<6> StartThread Detected : 0
<7> StartThread Detected : 0
<8> StartThread Detected : 0
<2> setup connection...
<2> e - dll cannot setup connection with the target.
<0> Destroy instant..
<0> Killed timer
or there is another message
<7> StartThread Detected : 0
<8> StartThread Detected : 0
<1> setup connection...
<1> odin mode.. check plcatform verification.
<1> VerifyPlatform:V0, P0,R0
I am stuck , some advice on how to flash the current recovery ?
Click to expand...
Click to collapse
First this is not where to ask, just so that you know!
Second, i really sugget to go back to stock compleatly and then proceed again to get CM9.
So always via odin flash you original firmware from sammobile.
For the messages that odin gives, try all the port on your computer, due to the fact that not all port works with it! when i use odin on my virtual machin with windows xp sometimes one of my usb works sometime the other. but the pc is always the same, so try them ALL!
If instead you want to try and flash just a custom recovery use broodplank quickflasher! it is easy and safe!
hope it works out!
maybe you misunderstood me , i will try be a little more explicit , so :
my phone is not bricked at this moment , I only tried to explain all the steps that got me to the current situation
i am able now to go in recovery mode (but this recovery does not allow me to do anything because the home button doesn't enable anything , only scrolls throw the menu , i explained in the previous post) and in download mode ...
the problem is that after i flashed the boot_loader after being stuck in RAMDUMP that solved the BSOD when i try to flash another recovery with odin it does not work and i don't think is a port problem because odin recognizes the phone , it gets stuck at <1> VerifyPlatform:V0, P0,R0 and does nothing .
in summary :
-flash sotck recovery with clockworkmod recovery v6.0.1.3 (not with odin)
-flash with odin a zip file by mistake got the phone semi-brick , BSOD only RAMDUMP worked
-flashd with odin from BSOD the bootloader and got the phone back
-not able to flash anoter recovery with odin because the above problem
solutions ?
laurcapa said:
it gets stuck at <1> VerifyPlatform:V0, P0,R0 and does nothing .
-not able to flash anoter recovery with odin because the above problem
solutions ?
Click to expand...
Click to collapse
Have you press the reset button in Odin after you flash the Bootloader?
Sometimes...(Not sometimes but every time for me) the Odin get stucked if you try to flash for second time without reset it...
After i flashed the BootLoader odin reseted the phone and told me to remove the serial link , so didn't requested me to reset anything
laurcapa said:
After i flashed the BootLoader odin reseted the phone and told me to remove the serial link , so didn't requested me to reset anything
Click to expand...
Click to collapse
Odin won't ask you to reset anything but there is a reset button on the right hand side...
nope , haven't reseted anything , but tried several times after closing and restarting odin
laurcapa said:
nope , haven't reseted anything , but tried several times after closing and restarting odin
Click to expand...
Click to collapse
Close Odin, Restart Odin again...press the reset files button, select ariesve.ops, one package, CWM.tar.md5
try and see...
laurcapa said:
nope , haven't reseted anything , but tried several times after closing and restarting odin
Click to expand...
Click to collapse
try from another pc. or battery pull let it be half an hour insert battery and try again. as things are now you can just try again and again to flash something.
or try out heimdall, i don't know if i9001 is supported but maybe it can work!
I solved the problem , after this post we cand consider the end of this topic.
The problem was due to the fact that i was using Android Reboot to get in recovery or Download mode , even if the phone showed me like i was in download mode i had the above error <1> VerifyPlatform:V0, P0,R0 even if the com port was open in odin ... after booting in download mode by pressing the buttons odin was able to flash the recovery .
What i learnd from this experience :
clockworkmod recovery v6.0.1.3 is not stable and for my device it didn't worked , not to be use
do not use .bat reboots to get in download mode when using odin
otherwise i now run CM10 with phantom kernel , i hope the phone doesn't restarts like before
thanks to everyone for the help and support
best regards
AW: Back to Stock Recovery
you have cm10 with other kernel and stock recovery? why? you must have for updates cwm or twrp recovery. a stable cwm is version 5.5.4.
Gesendet von meinem GT-I9001 mit Tapatalk 2
i have the following :
cwm version 5.5.4
CM v10
Phenom kernel
Hy
New question .
Can i use a custom kernel on a stock ROM ? Right now my phone is stock , i'm wondering if i install clickmod recovery and flush the custom kernel will it work .
10x