Database Develop

[Q] I don't now what have i done... PLEASE HELP!

I wanted to root my Samsung galaxy s i9000 (gingerbread) so i followed the procedure that i found on the dkszone "How To Root Samsung Galaxy S On Android 2.3.3 Gingerbread I9000 XXJVK ROM" (I can't post a lik). It looked like it worked but after I turned on wi fi it started rebooting constantly. I removed the battery and reinserted it. After I turned it on, it was the same situation (rebooting). I than flashed it with odin founded on tread "Stuck on main screen after root, keeps rebooting" on this site (pit512 was uploaded with PIT button, repart was chacked).
Now it is dead! Please help me.

Flash 2.2 with bootloaders, then flash Stock 2.3 or any 2.3 rom

if you cant get into download mode u have to try it via jig-method to get into download mode.
if you're in download mode reflash with some stock-rom or darkys ressurection-rom.
be sure you tick on repartition and use the 512-pit file.
u may follow this guide: http://www.darkyrom.com/community/i...-darkyrom-gingerbread-jvh-noob-friendly.3080/

IT WORKED!! I managed to flash it with ginger ROM for SGS. The problem was to get into the download mode.
Thanks guys.

[Q] Stuck in the download mode?

i used darky rom for weeks then decided to test MIUI rom
i made all steps like the installion guide but in odin "ready" didn't appear i clicked on start,set partition appeared but no thing happened
now i'm stocked in the download mode,can't get to recovery mode or to the rom
any help ???

So you wanted to flash back to Froyo and nothing happens?
Which firmware did you use for flashing, which PIT-file, was Re-partition ticked in Odin?

thanks for reply
i used odin v 1.7 ,pit named s1_odin_20100512 and the foryo rom with installation guide of MIUI GT-I9000_FROYO_FULL_PDA.the reprtitioning was ticked.
Alhamdu li Allah finally i installed the rom
that's what i did:
i removed the battery for a while.
i uninstalled samsung kies and usb drivers.
restart the computer and re install samsung usb drivers only.
used another odin v 1.3
get to the download mode and tried again and it worked finally

PIT-files should only be used with three-part firmwares.
But good that you finally got it!

[Q] Galaxy Note bricked when used "u1_02_20110310_emmc_EXT4.pit" in Odin

Okay. Some history to start with...
I got Chinese version of Galaxy Note which runs i9220 ROM and been trying to flash with HK/EU ROM last several days but out of luck so far. (And whenever failed, I re-loaded stock ROM found from Samsung-updates.com site for i9220. It then worked fine but still with original problem unsolved.
I then tried one last method that I saw someone succeed flashing Chinese ROM via use of PIT file came from one of the other downloads.. yeah, I didn't check the source PIT came from before try... which is my bad.
Without confirming it, I instantly located "u1_02_20110310_emmc_EXT4.pit" that's packaged with odin 1.85 and carelessly gave a try.
And now... my precious GalaxyNote became the most expense brick in my house and am looking for professional help from you guys.
Steps I did before bricking and tried:
1. Load GalaxyNote in Download mode (volume down + home + power)
2. Launch Odin 1.85 and no change to default setting. (Check mark on #Auto Reboot & #F.Reset Time, uncheck on #Re-Partition & #Flash Lock)
3. Set PIT to "u1_02_20110310_emmc_EXT4.pit"
4. Set PDA to "N7000XXKL7_N7000OXAKL7_N7000XXKL7_HOME"
5. Click #Start
Soon after around 5%, it failed.
I then attempted to restore factory ROM via usual way - doing same as above except no PIT this time and choosing original stock ROM for i9220.
It failed! OMG...
I then tried again (#1 ~ 5 above) but this time, check on #Re-partition for luck. Still no luck!
I then downloaded Heimdall1.3.1 and tried to extract PIT file but the tool fails as well and gives "ERROR: Failed to access device. libusb error: -12".
At all times, GalaxyNote screen shows android icon with 'Downloading... Do not turn off target!!'. And the device can also be seen from odin.
Soon as turn off galaxynote and disconnect from computer, it shows 'Software Update Fail' message.
How I can restore to original factory setting? And if possible, how I can restore to EU or Hong Kong ROM?
My Chinese friend has the same device as mine. In this case, will Heimdall tool help extracting PLT from it and help restoring my device via odin?
Your professional help is sincerely appreciated!!!!

Resolved
Using "Q1_20110914_16GB.pit" and re-partition check from odin while flashing to original stock rom has resolved an issue.
Referred from following thread.
http://forum.xda-developers.com/showthread.php?t=1533214

Never use pit and do not tick repartion when flashing.

bootloader?
U are fine. It is a recovery issue and not a bootloader. Install custom recovery and flash stock firmware w odin. Oh yea, and profit.

Toolmighty said:
U are fine. It is a recovery issue and not a bootloader. Install custom recovery and flash stock firmware w odin. Oh yea, and profit.
Click to expand...
Click to collapse
Why do you revive an old thread? The user has resolved it the day after his problem.

[Q] Galaxy GT-I9000 + Odin + Re-Partition by mistake

To unbrick the soft-bricked Samsung Galaxy GT-I9000, I used Odin3 v3.07 and s1_odin_20100512.pit file. By mistake I checked Re-Partition and now I'm facing trouble.
1. I cannot boot the phone.
2. The phone does not start in recovery mode.
The only thing I can do with the phone is to stat it in downloading mode.
Could you please suggest me the solution of described problem?

there are many ways to fix that, if only you had used search Immma do my best to show you a few or how to search for them
1. the ezbase kit complete with info http://forum.xda-developers.com/showthread.php?t=2095519 (the link is there somewhere)
2. download a stock firmware and write with odin without ticking repartition. select pit file but do not tick repartition
basically that should help your issue, considering you still have bootloader (and I assume odin still detects the phone) it should be fairly easy to fix.
cheers and good luck with it
BEcomputer06 said:
To unbrick the soft-bricked Samsung Galaxy GT-I9000, I used Odin3 v3.07 and s1_odin_20100512.pit file. By mistake I checked Re-Partition and now I'm facing trouble.
1. I cannot boot the phone.
2. The phone does not start in recovery mode.
The only thing I can do with the phone is to stat it in downloading mode.
Could you please suggest me the solution of described problem?
Click to expand...
Click to collapse

SOLVED
I solved the problem by following this link:- http://forum.xda-developers.com/showthread.php?t=1102881

BEcomputer06 said:
I solved the problem by following this link:- http://forum.xda-developers.com/showthread.php?t=1102881
Click to expand...
Click to collapse
The thread is really long and I don't know which one to use.
I am having the same problem as you.
Could you shed me some light?
Urgent...thanks

cycy101 said:
The thread is really long and I don't know which one to use.
I am having the same problem as you.
Could you shed me some light?
Urgent...thanks
Click to expand...
Click to collapse
Follow this guide and flash the gingerbread ROM or any Rescue kit, and you should be fine
Check this out! Links to useful Guides and " Banned " Documentaries ​

xsenman said:
Follow this guide and flash the gingerbread ROM or any Rescue kit, and you should be fine
Check this out! Links to useful Guides and " Banned " Documentaries ​
Click to expand...
Click to collapse
Thanks so much, it;'s back to work now....:good:

BEcomputer06 said:
To unbrick the soft-bricked Samsung Galaxy GT-I9000, I used Odin3 v3.07 and s1_odin_20100512.pit file. By mistake I checked Re-Partition and now I'm facing trouble.
1. I cannot boot the phone.
2. The phone does not start in recovery mode.
The only thing I can do with the phone is to stat it in downloading mode.
Could you please suggest me the solution of described problem?
Click to expand...
Click to collapse
Ive Re-partitioned my phone too, i flashed the PDA with CF-Root-XX_XEU_JPO-v1.2-busybox-1.17.1 and re-partition checked and i didn't notice till it was too late, my phone only boots in recovery mode and download mode
I was gonna try Ezbase recovery kit but don't know what stock rom to use
my phone is
GT I9000 (international sim free)
Firmware
2.2
Baseband
I9000xxjpp
Kernal Version
2.6.32.9
Build Number
Froyo.xxjpo
i tryed to recover in Kies but it wont find the phone even with the drivers reinstalled
can anyone link me to the rom ide need for Ezbase or give me some advice as to what i can do to recover my phone please?

Just flash gingerbread with odin and 512 pit file and you should be good.
Sent from my GT-I9000 using Tapatalk

repartition ticked in odin doesnt kill ur fone....if u have all the necessary file needed
pit, modem, CSC and PDA loaded, tick repartition and ur fone will b on da way to factory setting based ROM
unless u stop da process halfway

[Q] stuck at recovering error (solved)

hello,
i made a stupid mistake with flashing a rom with my i9001
i "flashed" the rom at update with zip file instead of using odin.
the problem is that i cant use odin or kies (usb debugging proberbly is of).
cant get in the rom aswell.
i still have the standard recovery but the phone is unrooted!
could some one give me a solution, coz im stuck!
thanks in advance

thesmith said:
hello,
i made a stupid mistake with flashing a rom with my i9001
i "flashed" the rom at update with zip file instead of using odin.
the problem is that i cant use odin or kies (usb debugging proberbly is of).
cant get in the rom aswell.
i still have the standard recovery but the phone is unrooted!
could some one give me a solution, coz im stuck!
thanks in advance
Click to expand...
Click to collapse
Download an i9001 CWM recovery, rename it as update.zip and flash using you 3e recovery, after that do not reboot but enter CWM recovery and try install a i9000 Custom ROM ( follow full flashing guide given by developer)
Check this out! Links to useful Guides and " Banned " Documentaries ​

But is this possible without being able to put the zip file of the cwm recovery into the internal memory of the phone?

thesmith said:
But is this possible without being able to put the zip file of the cwm recovery into the internal memory of the phone?
Click to expand...
Click to collapse
sorry about that, my lack of thought, anyway the solution would be to get download mode, which can be done by using a USB JIG, either that or you have to use JTAG to flash direct to the board when download mode becomes impossible.
But First, why can't you get download mode? have you tried any of the options mentioned in MY Android Solutins, link below...since you say you have recovery mode, download mode should be good to go?. if its working, just follow the i9001 flashing guide mentioned in My Android solutions to flash a gingerbread ROM using Odin 4.43 with AriesVe.ops
Check this out! Links to useful Guides and " Banned " Documentaries ​

Booting in download mode on the phone is not a problem, the problem is that my pc doesn't reconize the phone (kies and odin)

thesmith said:
Booting in download mode on the phone is not a problem, the problem is that my pc doesn't reconize the phone (kies and odin)
Click to expand...
Click to collapse
, the solution for that is also mentioned in My Android solutions , its a sticky thread , just above this thread or follow this
Check this out! Links to useful Guides and " Banned " Documentaries ​

csc shows unknown in my sII i9100g. can i flash a custom rom without any problem? like sony mobile if i flash 4.3 rom should i flash a kernel for particular rom?pls clarify.thanx in adv.
Sent from my GT-I9100G using xda premium

i don't know what solution i need to do, when my phone is stuck at the samsung logo (for booting normaly, with samsung flashing in blue).
when i plug in the USB at that nmoment and start kies, kies says that i need to put the debuging usb option on, i can't do this because i can't get in the ROM.
what do i need to do??
__________________________________________________________________________________________________________
EDIT:: i managed to install a CWM into the phone now i've got a new problem, it always boots into the CWM, how can i boot in the rom?
____________________________________________________________
Edit:: problem resolved needed another cwm.