Database Develop

Need help restoring everything to stock

Hello Guys!
I will sell my note today and i dont know how to install stock recovery etc.
On the device runs CM10 with CWM installed.
I know that i can flash stock rom but what is with the recovery system etc?
Should i flash with Odin from PC or with CWM?
Can you guys give me some help to change everything to stock back?
Thanks in advance!

Install a stock Rom (ICS or GB) from sammobile.com (or search here in Dr. Ketan's threads) with the PC version of Odin. Save your data on the internal SD card, after you can format it from within the new installed stock Rom.
Recovery is stock too then.

forum.xda-developers.com/showthread.php?t=1424997

Need help with Alliance ICS Final ROM

Hi all,
I'm sorry if I posted in the wrong place but as a newbie I cannot post in the thread of the ROM I have trouble with.
So, atm I'm trying to flash Alliance ROM Final ICS to my N7000 but I'm having some troubles with it. I have followed all of the instruction correctly, I have tried installing it either via ROM Customizer or CWM.
With ROM Customizer: when I was trying to flash the zip file then the phone reboot and takes me to the recovery window with error notification.
With CWM: After flashing the kernel (I tried both with Speedmod 3-13 and also Hydracore 4.3b STD), reboot to recovery, wipe data/factory, wipe cache partition, wipe dalvik, and then flash the ROM zip file. The ROM installed and says it finish. Then I choose go back and reboot the system. However, instead of continuing to install and to show Alliance bootanimation, the ROM that actually loaded is my old ROM which is Chrack 14 (also with Chrack bootanimation).
So basically, even though it looks like that the ROM successfully being installed, the fact is it failed. It looks like that this Chrack ROM very persistent to be uninstalled from my phone
Do you guys have any ideas what's happening here and what could be the problem?
FYI, my current ROM is Chrack 14 with Speedmod 3-13 as the kernel.
I really need your help guys. Believe me, I won't hesitantly ask you questions if I haven't read and follow instruction which are given by the developer of the ROM about how to install it correctly.:cyclops:
Really appreciate any inputs or solutions for my problems.
Thanks in advance guys.

boot into recovery and go to mounts and storage > then format system,data and cache. this will clear up the old rom. then try to install Alliance again.
Note: this will erase the system partition and there will be no rom to boot with if the install of new rom failed. so make sure you put all the required files in the phone before doing the formats. also to be extra prepared another rom may be.

Thanks for the reply. Uhm, what's the risk should it failed to flash the new ROM? And what will be the solution should it really fails at the end?
Is there any other safer options and maybe anyone can explain the possibilities that causing my current problem?
Also what do you mean by "the required files" here? And where i should put the files? In the internal memory or sd card?
Sorry for the noob questions.:banghead:
Sent from my GT-N7000 using Tapatalk 2

what's the risk should it failed to flash the new ROM? And what will be the solution should it really fails at the end?
Click to expand...
Click to collapse
Not much.. only you need to install a different rom or boot into download mode and flash a stock rom using PC odin
Also what do you mean by "the required files" here? And where i should put the files? In the internal memory or sd card?
Click to expand...
Click to collapse
i mean the files required to flash the rom.. and CWM can flash from both storages so it really doesnot matter

[Q] CWM recovery won't mount SD (and other problems)

While trying to get a new ROM I installed CWM recovery and it can't mount the SD card to install update.zip for CWM and the new ROM. The Jelly Bean OS I have installed won't boot (it says that it has unfortunately stopped working) so I can't put anything on my internal memory.
Any ideas?

rospaya said:
While trying to get a new ROM I installed CWM recovery and it can't mount the SD card to install update.zip for CWM and the new ROM. The Jelly Bean OS I have installed won't boot (it says that it has unfortunately stopped working) so I can't put anything on my internal memory.
Any ideas?
Click to expand...
Click to collapse
You need to flash JB with Odin first, if you was on GB. Then you can install custom JB ROM. And you need to repartition SD card if nothing is visible in CWM from it. For that read this thread. You need to use USB Mass storage to mount SD card, and be able to do that.
And if you got JB before instaling ROM, you need to do Factory reset in recovery. Probably that cause that "unfortunately stopped working".
P.S. What CWM you used, temp one? Use stock recovery, and root phone. Than use Frapeti's universal kernel flasher (it is in develeper section of I9070), and flash CoCore 6.2 (unpack it first and use kernel.bin.md5).

It was on Jelly Bean before doing anything. I tried factory reseting multiple times and it didn't work. I'm using CWM recovery 5.8.1.5.
So if I can't get into the OS and recovery doesn't work, what's my first step? Will Odin recognize my phone?
Thanks
Edit: never mind, it just worked. I don't really understand how and thank you for your help.

rospaya said:
It was on Jelly Bean before doing anything. I tried factory reseting multiple times and it didn't work. I'm using CWM recovery 5.8.1.5.
So if I can't get into the OS and recovery doesn't work, what's my first step? Will Odin recognize my phone?
Thanks
Edit: never mind, it just worked. I don't really understand how and thank you for your help.
Click to expand...
Click to collapse
Use CWM that is integrated in kernel, like CoCore 6.2 kernel. You used temporary CWM?

galaxy note from 4.4.1 to 4.0.4 downgrade

How to downgrade from KitKat to jelly bean 4.1.2 through recovery

You can only flash custom ROMs based on touchwiz ROMs through recovery like sweetrom or aryamod .... or use Odin to flash original Samsung firmware because you can't use recovery to flash original firmware.
Press thanks if I helped you.
Sent from my GT-N7000

kaborayyan said:
You can only flash custom ROMs based on touchwiz ROMs through recovery like sweetrom or aryamod .... or use Odin to flash original Samsung firmware because you can't use recovery to flash original firmware.
Press thanks if I helped you.
Sent from my GT-N7000
Click to expand...
Click to collapse
Or he just has to flash kernel for stock based ROMs and then flash some 4.0.x ROM.

I have Omni rom 4.4.2 and how to go back to 4.1.2 (sweet room v1.1 lta e.g or aryamod v4)

sasabo said:
I have Omni rom 4.4.2 and how to go back to 4.1.2 (sweet room v1.1 lta e.g or aryamod v4)
Click to expand...
Click to collapse
same way you flashed omni.

nokiamodeln91 said:
same way you flashed omni.
Click to expand...
Click to collapse
any tutorial?

sasabo said:
any tutorial?
Click to expand...
Click to collapse
boot recovery
wipe data and cache
install new rom
reboot

Wipe Data/Factory reset” or not?

sasabo said:
Wipe Data/Factory reset” or not?
Click to expand...
Click to collapse
Same as step 2

which cwm to flash,philz v5 or kitkat v 6?This say by sweet rom: Flash any Philz JB Kernel (after 4.35 cwm but recommend any newer than 4.89.4).
Do I need to flash an older version of CWM recovery when I switched back to JB 4.1.2?

How to revert back from Omni ROM KitKat to Stock Jellybean Rom on my N7000
Hi,
I am a noob and have installed Omni ROM KitKat 4.4.4 on my Samsung Galaxy Note N7000.
I am not able to effectively the features that were available on my note ealrier, not I am able to backup contacts from Titanium BAck Up.
I would like to revert back to the original firmware jellybean 4.1.2 . Is downgrading going to brick my mobile , can some one help me with this .

lakkuMS said:
Hi,
I am a noob and have installed Omni ROM KitKat 4.4.4 on my Samsung Galaxy Note N7000.
I am not able to effectively the features that were available on my note ealrier, not I am able to backup contacts from Titanium BAck Up.
I would like to revert back to the original firmware jellybean 4.1.2 . Is downgrading going to brick my mobile , can some one help me with this .
Click to expand...
Click to collapse
Downgrading to JB is as easy as booting into recovery, wiping data, booting into download mode and flashing the stock rom
or booting into recovery and flash a custom TW rom or restore the backup if you made any before flashing Omni.

I have a non-rooted phone upgraded with what Samsung provided (several OTA, then Kies to 4.1.2, N7000XXLTC).
I'd like to downgrade to stock 4.0.4. My steps are:
1. wipe cache & data from Recovery (would a Factory Reset do both?);
2. use Odin to flash the ROM;
3. never do any sort of wipe again.
Is that correct?

doloresanto said:
I have a non-rooted phone upgraded with what Samsung provided (several OTA, then Kies to 4.1.2, N7000XXLTC).
I'd like to downgrade to stock 4.0.4. My steps are:
1. wipe cache & data from Recovery (would a Factory Reset do both?);
2. use Odin to flash the ROM;
3. never do any sort of wipe again.
Is that correct?
Click to expand...
Click to collapse
Steps are correct... Use the recovery option to wipe data / factory reset ..instead of the settings menu.

Do I have to root my device to use PC Odin?

doloresanto said:
Do I have to root my device to use PC Odin?
Click to expand...
Click to collapse
No

nokiamodeln91 said:
Downgrading to JB is as easy as booting into recovery, wiping data, booting into download mode and flashing the stock rom
or booting into recovery and flash a custom TW rom or restore the backup if you made any before flashing Omni.
Click to expand...
Click to collapse
same thing for me,
but I have a issue here. I had made a backup of my 4.1.2 rom in cwm, and flashed a 4.4.3 omnibus rom,, after flashing omni I have twrp recovery rather cwm recovery , so I am unable to restore cwm backup
do I need to flash cwm again ,?
or any other ways
omni rom draining battery very fast, and it made a dead battery
thanks

vishvish3 said:
same thing for me,
but I have a issue here. I had made a backup of my 4.1.2 rom in cwm, and flashed a 4.4.3 omnibus rom,, after flashing omni I have twrp recovery rather cwm recovery , so I am unable to restore cwm backup
do I need to flash cwm again ,?
or any other ways
omni rom draining battery very fast, and it made a dead battery
thanks
Click to expand...
Click to collapse
Yes you will need to get CWM.. flash raw or philz kernel and then reboot recovery, wipe and restore the backup.

Let me share my own experience
Whenever i wanna go back to jellybean from kitkat :
1. Do clean wipe
2. Flashing official gingerbread rom
3. And then installing jellybean..
I dont know why but whenever flashing jellybean after do a clean wipe it never works so what i do is flashing gingerbread first hehe
Sent from my GT-N7000 using XDA Free mobile app

I'm on 4.4.4 DU Rom.. The phone got hanged after I enabled the allow mock location option. Then the phone got stuck at the Samsung Logo screen. I went to recovery and tried doing factory reset, but it failed with error as unable to mount /data. After that recovery mode is not available, but I can go in Download mode. So, i tried to install JB 4.1.2 - N7000XXLTA via Odin. But the process gets failed after 'NAND write start'!!!
Any solution???

[Q] Bricked my GT N7000

Hi guys,
while trying to flash OMNI ROM kikat i bricked my phone.
The phine doesnt go past recovery or download mode. Any zip file i try flash come up with an error. I got rid of the "status7" error but another error came up.
I troed installing various versions on CWM but still wont flash the Omni ROM i downloaded. I also ddnt back up the system before doing this.
Any assistance please?

khakhi said:
Hi guys,
while trying to flash OMNI ROM kikat i bricked my phone.
The phine doesnt go past recovery or download mode. Any zip file i try flash come up with an error. I got rid of the "status7" error but another error came up.
I troed installing various versions on CWM but still wont flash the Omni ROM i downloaded. I also ddnt back up the system before doing this.
Any assistance please?
Click to expand...
Click to collapse
Did u follow this ? Doesn't go past recovery nor download means? You can still access both mode? Worst comes to the worst just flash stock 4.1.2 Samsung Rom using Odin n follow the guide I attached.

Jackwu696 said:
Did u follow this ? Doesn't go past recovery nor download means? You can still access both mode? Worst comes to the worst just flash stock 4.1.2 Samsung Rom using Odin n follow the guide I attached.
Click to expand...
Click to collapse
Howsit bru, sorted....i managed to find a stock Kernerl that i flashed via ODIN...but i will follow ur instructions to flash the OMNI ROM which i have already downloaded and will flash it tonight. i will follow your steps clearly.
Thank you for your help

Howsit bru? i tried following your link to install OMNI ROM but i get an error when flashin Philz recovery. pls help

khakhi said:
Howsit bru? i tried following your link to install OMNI ROM but i get an error when flashin Philz recovery. pls help
Click to expand...
Click to collapse
Please tell me what rom were you on previousy before u had this problem. Can u boot to recovery? If you can, try flashing philz_touch_6.19.3-n7000.zip and reboot to recovery again. After that do all wipes: factory wipe reset n Yes I wanna flash a new rom superwiper. Then wipe dalvik cache. After that flash omnirom. If you still can't proceed, then I suggest you flash stock rom first to let your phone boot to system
Sent from my GT-N7000

Jackwu696 said:
Please tell me what rom were you on previousy before u had this problem. Can u boot to recovery? If you can, try flashing philz_touch_6.19.3-n7000.zip and reboot to recovery again. After that do all wipes: factory wipe reset n Yes I wanna flash a new rom superwiper. Then wipe dalvik cache. After that flash omnirom. If you still can't proceed, then I suggest you flash stock rom first to let your phone boot to system
Sent from my GT-N7000
Click to expand...
Click to collapse
Im back to the stock ROM 4.1.2 and phone is working fine bu t iwant to try the OMNI ROM
When i try flashing Philz recovery i get this error in recovery "Signature verification failed"

khakhi said:
Im back to the stock ROM 4.1.2 and phone is working fine bu t iwant to try the OMNI ROM
When i try flashing Philz recovery i get this error in recovery "Signature verification failed"
Click to expand...
Click to collapse
Ok. So I'll assume u r back to "0". So things to do will be :
1. Root and install custom recovery on your phone. I ALWAYS use older phils recovery + kernel such as PhilZ-cwm6-XXLTA-ATL-5.15.0-signed (XXLTA is based on my stock rom BUILD number. Download according to yours) This will give you root (superuser) & recovery installed.
2. After flashing phils, reboot to recovery by using 3 button combo n do ALL wipes the best being wipe factory + I want to install new rom super wiper + dalvik cache.
3. Flash my previous post mentioned phils advanced recovery ( I Always use that vers. N NO error whatsoever) reboot to recovery again n flash your omnirom.
4. DONE
Sent from my GT-N7000