Database Develop

[Q] Installing new rom

Hi,
I have an question i want to install a new rom
This one http://forum.xda-developers.com/showthread.php?t=1871713
but is says : Status 7 installation abboted
My cwm base version is 6.0.1.9
This was my other qeustion maybe is that helpful for my new qeustion
http://forum.xda-developers.com/showthread.php?p=35430659#post35430659
Thanks in advance

Seems you are on the leak Samsung jb with philz kernel. You can flash cm10 kernel or hydracore and then select boot into recovery and then flash the ROM. Boot into recovery will be under "advanced"
Sent from my GT-N7000 using xda premium

And where can i find so fast that kernel
ive been searching but i only found cwm rom's not kernels
Gr.

You are using Philz kernel, or you want it?
Sent From My Rooted Samsung Galaxy S2 JB 4.1.2 (GT-I9100)

Hydracore kernel will be in the Original Development Section

So i can install this one Kernel_CM10_20121213_Nightly_CWM
Over my kernel which i have now

Or this one do you know whats better ?
http://forum.xda-developers.com/showthread.php?t=1749863

you can use any. and as you are on TW JB phone wont boot on either. so preload all the required files before flashing the kernel just to be on the safe side

[Q] Help with my Galaxy Note

Hi, I need help with my Galaxy Note. I just buy secondhand Galaxy Note, it has XXLS2 4.1.1 rom for now. I want flash AOSPA 4.2.1 rom on it. My previous phone was HTC HD2, so I'm used to flashing without limitation So, I need your help to tell me if I'm thing good about it. So, firstly I must flash Philz kernel for my phone, to get root and recovery. But for my rom is only version 2.7... is it safe to flash? And next I can just do full wipe, reboot, and flash AOSPA 4.2.1 rom, yes?

You won't be able to flash a aokp rom using philz 2.7 as it will not install and error 7.
-Install Philz and gain root and cwm
-Then place all the required files to flash the rom to storage.
-Then flash a different safe kernel like hydracore or cm kernel.
-Boot into recovery and do wipes and formats and flash. the rom. (while on a different kernel you might not be able to boot into the rom. Just recovery)

And version 2.7 is safe? Why there is no 3.99 version for this rom? But when I finally flash PA rom, I can stay with kernel included in this rom? Or I need to flash cm kernel second time? I'm going to make backup before flashing new rom, but I'm just wondering if I can normally recover this on PA rom or I need to flash stock philz kernel before restoring... So the "diffrent safe" kernel may be "Kernel_CM10.1_20130126_Nightly_CWM.zip", yes? It will work with aosp based pa rom? I'm going to flash 2.99 version...

sinedoOo said:
And version 2.7 is safe? Why there is no 3.99 version for this rom? But when I finally flash PA rom, I can stay with kernel included in this rom? Or I need to flash cm kernel second time? I'm going to make backup before flashing new rom, but I'm just wondering if I can normally recover this on PA rom or I need to flash stock philz kernel before restoring... So the "diffrent safe" kernel may be "Kernel_CM10.1_20130126_Nightly_CWM.zip", yes? It will work with aosp based pa rom? I'm going to flash 2.99 version...
Click to expand...
Click to collapse
Yes 2.7 is safe. Just that it cannot install some roms.
Because it's and old kernel.
Yes stay with the kernel included in the rom
Yes PA has a safe kernel and the backup can be restored.
Any kernel like hydracore or cm will do.
Also 2.99 PA might not to that's stable. So.. Your choice. You can use and older version like 2.57 as well

Actually Philz 2.7 is ICS/older JB, and therefore not subject to error 7. Good to wipe and Flash ROMs with. (It's safe too)
Sent from my GT-N7000 using xda app-developers app

shoey63 said:
Actually Philz 2.7 is ICS/older JB, and therefore not subject to error 7. Good to wipe and Flash ROMs with. (It's safe too)
Sent from my GT-N7000 using xda app-developers app
Click to expand...
Click to collapse
Need to meditate

GT N7000
hi frds i am having a issue with Amnix Xperia ROM Build 3 for GT N7000. After I installed my antivirus & later when it finished scanning for malware it gives warning about one app - MALICIOUS APP
VOODOO-INSTANT-ANTI-EXYNOS-MEM-ABUSE-0.3.APK
EXPLOIT.EXYNOS.A
can someone pls help....is it a virus....

It's already replied in the noob friendly thread

I forget to reply, sorry. Thanks! It is all working good, so I have now my Galaxy Note with newest Paranoidandroid rom

jb to 4.2.2 cm 10.1

hi i just got my new note. iv updated to JB and root with << 13.03.2013 - PhilZ-cwm6 v4.88.2 with CWM 6.0.2.9 based recovery >> kernal
my phone details
baseband n7000xxlso
build number jzo54k.n7000zslm5
i want to install **[4.2.2][CM10.1][LINARO] Team Asylum CM10.1 Keiras™ - Slim, Fast and Black Roma™**
http://forum.xda-developers.com/showthread.php?t=2051904
do i just flash as normal in CWM
many thanks

iqb043 said:
hi i just got my new note. iv updated to JB and root with << 13.03.2013 - PhilZ-cwm6 v4.88.2 with CWM 6.0.2.9 based recovery >> kernal
my phone details
baseband n7000xxlso
build number jzo54k.n7000zslm5
i want to install **[4.2.2][CM10.1][LINARO] Team Asylum CM10.1 Keiras™ - Slim, Fast and Black Roma™**
http://forum.xda-developers.com/showthread.php?t=2051904
do i just flash as normal in CWM
many thanks
Click to expand...
Click to collapse
its ok now

Yes, make a backup and flash the rom zip + gapps zip.
Goodluck
Sent from my GT-N7000 using xda app-developers app

I did it today, it worked fine.
Prefer the old style non touch kernel imho (the touch kernel is crap...)

Philz Kernel on Paranoid Android 3.15?

So I generally feel I know my stuff to a limited degree about phones, but I am unsure of this...
I am using the standard "safe CM kernel" but have always prefered Philz's interface over native CWM.
Now what is the issue with this, why people don't seem to like his? Is it the fact that he's not open source 100%?
And would there be any problems with flashing his kernel onto PA and over the default CWM 6.0.1.4 (or whatever the most up to date version is)?
If someone can explain in laymans terms that would be great.
Thanks

PhilZ + PA (CM, Aospa, aosp, aokp) = total chaos bootloop
PhilZ + Touchwiz = safe kernel and root and recovery
Sent from my GT-N7000 using xda premium

Okay. So basically Philz kernel is for stock touchwizz (Samsung) roms only.
Because you are running a rom based on CM (and not TW), Philz kernel won't work, so you won't be able to get his modded CWM interface.
So if you flash his kernel over PA, you will get
TheNoticer said:
total chaos bootloop
Click to expand...
Click to collapse

[RECOVERY] [i9082/i9082L] Clockworkmod Touch & Non-Touch Recoveries [Update v6.0.5.0]

[RECOVERY] [i9082/i9082L] Clockworkmod Touch & Non-Touch Recoveries [Update v6.0.5.0]
CLOCKWORKMOD NON-TOUCH RECOVERY
v6.0.5.0
(Compiled from CM11 source)
Instructions to install the latest CWM v6.0.5.0 Non-Touch are same as below.
Date: 22nd July 2014
Clockworkmod Non-Touch Recovery v6.0.5.0
Download
-----x-----x-----x-----
v6.0.4.9
Instructions to install the latest CWM v6.0.4.9 Non-Touch are same as below.
Date: 18th June 2014
Clockworkmod Non-Touch Recovery v6.0.4.9
Download
-----x-----x-----x-----
v6.0.4.7
(Compiled from CM11 Source)
Instructions to install the latest CWM v6.0.4.7 Non-Touch are same as below.
Date: 5th February 2014
Clockworkmod Non-Touch Recovery v6.0.4.7
Download
-----x-----x-----x-----
v6.0.4.5
(v6.0.4.5 hasn't been compiled by me. It is pawitp's recovery. He provided it as an ODIN flashable *.tar file, I packed it into a CWM flashable zip file. All credits to pawitp.)
(Pawitp's Thread)
Instructions to install the latest CWM v6.0.4.5 Non-Touch are same as below.
Date: 12th December 2013
Clockworkmod Non-Touch Recovery v6.0.4.5
Download
-----x-----x-----x-----
v6.0.4.4
(Compiled from CM10.2 Source)
Instructions to install the latest CWM v6.0.4.4 Non-Touch are same as below.
Date: 8th November 2013
Latest unmodified Clockworkmod Non-Touch Recovery v6.0.4.4
Download
-----x-----x-----x-----
MODDED CLOCKWORKMOD TOUCH RECOVERY
v6.0.3.6
Yes, we already have a CWM Touch Recovery, TWRP and the highly customizable Philz Recovery for our Galaxy Grand i9082/i9082L, all thanx to the talented and brilliant developers and owners of i9082!
​
Then what are these?
These are a bit modified (modded), unofficial CWM Touch Recoveries for i9082/i9082L.
I like things customized my way, so i started working on customizing CWM Touch Recovery that i used very frequently for flashing and backups. And I have always disliked the fat android in the background that used to pop up whenever i flashed something! (No offence to any CWM developer, it is just my opinion)
There isn't much that i could have customized as touch sources of Clockworkmod recovery are not open source, but i did all i could and the way i like it.
Works on all ROMs, 4.1.2 (official), 4.2.2 (official and leaked) and all AOSP based ROMs (CM10.1, AOKP, PA, Slimbean, etc).
I'll try and keep the modded Clockworkmod Touch recoveries up to date for i9082 with all the latest changes.
Custom Modifications:
-> Changed the background of CWM (Text is now more readable than stock look)
-> Removed the animation in the fat Android's stomach
-> Removed the fat Android itself
-> Placed a "good-looking" android on the right of the screen so that it doesn't interfere with the text when flashing
-> Internal memory support added (When the CWM version is made, by default it only allows External SD card to be accessed)
-> Adjusted the Clockworkmod logo to be more visible and text more readable
-> Moved progress bar to the bottom edge (Let's face it, it isn't that useful anyways. It's the text and the log that matters more)​​
How to flash them?
-> You can use any currently running custom recovery in your phone to flash these new recoveries.
-> Download the recovery that you want.
-> Put the recovery on your SD card (Internal or External)
-> Flash using your current custom recovery!​​
Latest unmodified Clockworkmod Touch Recovery is also in the Downloads if you wish to revert back to the old look and feel.
When you get bored out of your CWM Touch Recovery's look, just flash a new one from within the old one. Everything changes!
Make your phone look like YOU OWN IT in every possible way!
​
DOWNLOADS​
Below are all CWM/TWRP/Philz Recovery flashable zips.
For ODIN Flashable unmodified CWM Touch Recovery files, check HERE or HERE
Date: 8th September 2013
Clockworkmod Touch Recovery v6.0.3.6
Latest unmodified Clockworkmod Touch Recovery v6.0.3.6
AFH | MEGA | DROPBOX
Blue Clockworkmod Touch Recovery v6.0.3.6
MEGA | DROPBOX
Wood Big Clockworkmod Touch Recovery v6.0.3.6
MEGA | DROPBOX
Wood Black Clockworkmod Touch Recovery v6.0.3.6
MEGA | DROPBOX
Wood Light Clockworkmod Touch Recovery v6.0.3.6
MEGA | DROPBOX
Green Clockworkmod Touch Recovery v6.0.3.6
MEGA | DROPBOX
Red Clockworkmod Touch Recovery v6.0.3.6
MEGA | DROPBOX​

IMAGE GALLERY​
For full size pictures
CLICK HERE​
Credits:
Koushik Dutta
CWM Team
chotu222
pawtip
DBZo07
And all the hardworking and talented developers of Galaxy Grand i9082
​

Reserved....

Makes using the recovery much easier, doesn't it? Would be great if the scroll was a little bit smoother...
Sent from my GT-I9082 using XDA Premium 4 mobile app

CyberZ-JB said:
Makes using the recovery much easier, doesn't it? Would be great if the scroll was a little bit smoother...
Sent from my GT-I9082 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Yes! It is more readable and better looking now.
Touch based recovery's source isn't open source (yet). So can't make changes to that (as of now).

CyberZ-JB said:
Makes using the recovery much easier, doesn't it? Would be great if the scroll was a little bit smoother...
Sent from my GT-I9082 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
scrolling is same as its in any other CWM of any device!
@xenon92
superb bro!! The one you gave me to test is my favorite color!! thanks dude!

Is it based on 4.2.2 recovery.img ?
Sent from my GT-I9082 using xda premium

akiratoriyama said:
Is it based on 4.2.2 recovery.img ?
Click to expand...
Click to collapse
It's based on the latest 4.1.2 recovery image. I built CWM Touch Recovery from 4.2.2 INU version, but it wasn't working on base 4.1.2. Then i tried recovery based on Thailand version by Mohanshbhr but that didn't work on base 4.1.2 either. In short, that means to run AOSP based ROMs (CM10.1, AOKP, PA, Slimbean, etc) we need base as 4.1.2 (as of now) and anyone who has flashed 4.2.2 official Samsung ROM can't run AOSP based ROMs.
My recoveries based on 4.1.2 work on all ROMs, AOSP based, 4.1.2 Official and 4.2.2 Official.

xenon92 said:
It's based on the latest 4.1.2 recovery image. I built CWM Touch Recovery from 4.2.2 INU version, but it wasn't working on base 4.1.2. Then i tried recovery based on Thailand version my Mohanshbhr but that didn't work on base 4.1.2 either. In short, that means to run AOSP based ROMs (CM10.1, AOKP, PA, Slimbean, etc) we need base as 4.1.2 (as of now) and anyone who has flashed 4.2.2 official Samsung ROM can't run AOSP based ROMs.
My recoveries based on 4.1.2 work on all ROMs, AOSP based, 4.1.2 Official and 4.2.2 Official.
Click to expand...
Click to collapse
This means I can run this on my AMF7
Thanks for the info :thumbup:
Sent from my GT-I9082 using xda premium

Works fine with my GT-I9082L with stock rom !
Sent from my GT-I9082L using xda app-developers app

good work!!!

Thank you k2wl.
thiefxhunter said:
Works fine with my GT-I9082L with stock rom !
Sent from my GT-I9082L using xda app-developers app
Click to expand...
Click to collapse
Thank you for trying on i9082L. Updated the OP that these work on i9082L as well. I hoped they would, but couldn't have confirmed without someone testing it.

Installation Query
I have read these installation instructions.
You can use any currently running recovery in your phone to flash these new recoveries.
As I am noob & am terrified at the loss of use of phone if something goes wrong. I just want to know can I flash this using stock recovery on 4.2.2 Inu version? also is there is any need to flash fix recovery file to make this recovery permanent?

drshreenivaas said:
I have read these installation instructions.
You can use any currently running recovery in your phone to flash these new recoveries.
As I am noob & am terrified at the loss of use of phone if something goes wrong. I just want to know can I flash this using stock recovery on 4.2.2 Inu version? also is there is any need to flash fix recovery file to make this recovery permanent?
Click to expand...
Click to collapse
You need to have a custom recovery already installed before you install any one of these. So first you need use ODIN to replace stock recovery with a custom one, and if it is your first time rooting your phone and putting a custom recovery, read extensively before you do so. You can use thread by chotu222 that i have linked in the OP. You'll need to flash Fix Recovery only once when you are replacing stock recovery with a custom one. Then you can flash other custom recoveries from within the recoveries themselves.
Sent from my iPad using Tapatalk

nice work....

Updated the OP with the latest CWM Non-Touch Recovery v6.0.4.4. Compiled from CM10.2 source code.
Even i don't use CWM Recovery anymore. Philz Recovery has everything that I need. CWM Non-Touch Recovery v6.0.4.4 was just lying there on my HDD for the past few days so i upload it.
Where is latest CWM Touch based recovery v6.0.4.4?
Ans - Read OP. (Post #1)

grrt Work!!!!!!!!!!!!!:good::good:

OP updated with recovery flashable v6.0.4.5 Non Touch ZIP for CM11 (kitkat). It is pawitp's recovery repacked by me in a flashable zip file. All credits to pawitp for the recovery.

after flashing this cwm via recovery,the phone is stuck in sgg bootlogo;help me out here please
has any1 had this problem?

joker705 said:
after flashing this cwm via recovery,the phone is stuck in sgg bootlogo;help me out here please
has any1 had this problem?
Click to expand...
Click to collapse
I tested the v6.0.4.5 zip by flashing it on TWRP, CWM v6.0.4.4, CWM v6.0.3.6, Philz recovery. It worked from all recoveries. On which recovery did you flash it?
EDIT: Over 40 ppl have downloaded the zip in the last 9 hours and no one else has reported issues..
Sent from my iPad using Tapatalk