Hello All,
I would like to start by saying that i am a huge fan of XDA DEV and everything that has been done here for the android community. I myself am a noob , more or less , so i basically bricked my phone.
I decided to update my viper one rom to 4.3 9 from (2.3 ) and came across zero access to CWR and bootloops.
SOMEHOW... i managed to use ADB as well as tool kits to reinstall a cwm ( after about 100 attempts ) .. and reflash my old 2.3 viper rom.
Now i cannot access my nandroid backup which i made before flashing to 4.3. I am going to try to reflash an older version of CWRM and maybe it will be there.
Furthermore, i would like to know what the proper procedure to upgrade my device . If anyone would be so kind and instruct me, i will appreciate it.
Thank you!
EDIT :::
- I am S-on ( probably makes a difference )
AlexG236 said:
Hello All,
I would like to start by saying that i am a huge fan of XDA DEV and everything that has been done here for the android community. I myself am a noob , more or less , so i basically bricked my phone.
I decided to update my viper one rom to 4.3 9 from (2.3 ) and came across zero access to CWR and bootloops.
SOMEHOW... i managed to use ADB as well as tool kits to reinstall a cwm ( after about 100 attempts ) .. and reflash my old 2.3 viper rom.
Now i cannot access my nandroid backup which i made before flashing to 4.3. I am going to try to reflash an older version of CWRM and maybe it will be there.
Furthermore, i would like to know what the proper procedure to upgrade my device . If anyone would be so kind and instruct me, i will appreciate it.
Thank you!
EDIT :::
- I am S-on ( probably makes a difference )
Click to expand...
Click to collapse
HI, You are NOT bricked. (bricked means non fixable)
TWRP is clearly mentioned by op on viper thread "AT LEAST Twrp 2.6.3.3 required (If you experience issues with Twrp 2.6.3.4, please downgrade by flashing TWRP 2.6.3.3 through the ViperOne installer main menu)
Sprint and Butterfly support is not available on 4.x.x yet. Last working rom for Sprint and Butterfly S is 3.5.0"
Are you on sprint? see above
Also, when s-on, need to extract boot.img and flash it via fastboot (fastboot flash boot bootimg).
clean install imminent for that huge update.
read first page again for better understandinghttp://forum.xda-developers.com/showthread.php?t=2334294
don't mention "bricked" and will find more help
Related
Basically situation is as follows - I have a phone that bricked after FOTA. I can't flash any RUUs since the version inside is higher. Jtag does not help, after full erase and rebuild of literally everything the phone remains a brick and still wants a firmware version higher than I can give it.
A few things I would like to ask. How do I flash OTA update to this phone?
I can install CWM thus have adb, I do have fastboot, I can change CID (at the moment i ve made it 11111111) I can make S-OFF.
How to perform a clean install of a custom rom only?
I am sure it is a SW brick since I managed to run it after install of a custom rom. BUT I decided to flash stock after that, and I can't repeat procedure. Any help and suggestions are apreciated. Anything will be helpfull.
Download the ROM you want, go into your Recovery and wipe Cache, Data, Davlik Cache (and SDcard if you want to) and then mount the storage via recovery and simply copy the .zip to your SDcard and install it after unmounting it.
Of course know how to flash roms from CWM))).
Sv: [Q] Please help me with a brick =)
Try s-off your phone then install a ruu.exe file that fits your cid.
Sent from my HTC Sensation using xda premium
I did that. It seems there is a problem since the phone once was 2.33 version but the latest ruu I can find is 2.31. I managed somehow flash it 2.31, but that is about it.
I am going to try to flash custom from your signature, and make the phone s-off, again...
Well it must be some strange HW error, since software wise I ve done literally everything.
skas_2002 said:
I did that. It seems there is a problem since the phone once was 2.33 version but the latest ruu I can find is 2.31. I managed somehow flash it 2.31, but that is about it.
I am going to try to flash custom from your signature, and make the phone s-off, again...
Click to expand...
Click to collapse
The fastboot flashables stock zip files i have for 2.33 are:
Runnymede_2.33.415.1_ARA
Runnymede_2.33.707.1_Asia_WWE
Runnymede_2.33.1113.1_Thailand
If you want any of these, i can upload for u
Ty, I found everything. The phone is has some kind of hardware fault i think. Too much work at the moment, I will post result once I get to it.
e-MMC problem. Not software related, even though it looked extremely software related .
if needed do i have : RUNNYMEDE_ICS_35_S_2.37.709.1_hTC_Asia_TW
Every time I trie to update to the latest ROMs I notice they specifically target the new bootloader. I have no idea what the old vs new bootloader dilemma is about but I bet my device runs the old one, I read somewhere the white LG logo on startup hints to an old bootloader,
My question is how to upgrade my bootloader or ROM directly to Kitkat the easiest way possible, I bought my handset already CMed and unrooted but I have never done it myself.
Thank you in advance, and if you could bother throw in some links to relevant threadshttp://forum.xda-developers.com/images/icons/icon8.gif
xdaCyborg said:
Every time I trie to update to the latest ROMs I notice they specifically target the new bootloader. I have no idea what the old vs new bootloader dilemma is about but I bet my device runs the old one, I read somewhere the white LG logo on startup hints to an old bootloader,
My question is how to upgrade my bootloader or ROM directly to Kitkat the easiest way possible, I bought my handset already CMed and unrooted but I have never done it myself.
Thank you in advance, and if you could bother throw in some links to relevant threadshttp://forum.xda-developers.com/images/icons/icon8.gif
Click to expand...
Click to collapse
for tonyps kitkat , the only one for daily usage workign at the moment. you need his version of twrp 2.6 or as i know the cwm version 6.0.4.7, which can be found somewhere in the development forum.
tonyps cm11 : tonyps Cm11
kowalski kernel: kowalski kernel by pengus
dl links: cm11 by tonyp and bs86
working twrp by tonyp
They are New Bootloader only! The process seems as easy as full wipe + flash the zip (my phone came with ROM Manager 4.5.0.1 with old recovery) but I fear my bootloader in incompatible. Is there a way to update or something.
Also does my sd card and all applications get removed, and how to back them up, also if I brick my device does the recovery still work to flash the back up or what? very noob I know, I learned alot of terms but never managed to make good sense of it all, thank you.............
Oh one minute my ROM Manager has an Install ROM from SD Card button, can I do it right inside ROM Manager?
xdaCyborg said:
They are New Bootloader only! The process seems as easy as full wipe + flash the zip (my phone came with ROM Manager 4.5.0.1 with old recovery) but I fear my bootloader in incompatible. Is there a way to update or something.
Also does my sd card and all applications get removed, and how to back them up, also if I brick my device does the recovery still work to flash the back up or what? very noob I know, I learned alot of terms but never managed to make good sense of it all, thank you.............
Oh one minute my ROM Manager has an Install ROM from SD Card button, can I do it right inside ROM Manager?
Click to expand...
Click to collapse
With that you can backup/resotre and change the bootloader and alot more AiO-Toolkit
If you change the bootloader layout, as i know all stuf will be removed. so make a nandroid backup, if your new rom is not working and make a sdcard backup(also in aio) to get appdata back if you want.
If you dont want to download all apps new after having new rom use titanium backup. the recovery is not breakable. it will always work. not important if you **** your rom
xdaCyborg said:
They are New Bootloader only! The process seems as easy as full wipe + flash the zip (my phone came with ROM Manager 4.5.0.1 with old recovery) but I fear my bootloader in incompatible. Is there a way to update or something.
Also does my sd card and all applications get removed, and how to back them up, also if I brick my device does the recovery still work to flash the back up or what? very noob I know, I learned alot of terms but never managed to make good sense of it all, thank you.............
Oh one minute my ROM Manager has an Install ROM from SD Card button, can I do it right inside ROM Manager?
Click to expand...
Click to collapse
As you do have CM 7.1 installed, I guess you've got a custom recovery installed too? I don't think you can directly use ROM manager to install a kernel, but you can use ROM manager to boot into recovery mode and flash the zip from there Just be sure to make a nandroid backup, just in case KK isn't compatible with 7.1.
If you ever want to get tonyp's CM 11 though, the AIO toolkit, as @Zubeplanet pointed out, is really easy to use to get the new bootloader.
Happy flashing!
Hello can anyone help me install a cwm for my 4.4.4 z1 c6903 unlocked bootloader (also rooted . version 4.4.4 with the .108 on the end) ?! I really want to flash a new custom rom for this phone and unlike samsung phones the tutorials on youtube for 4.4.4 are missing !
Drewmk20 said:
Hello can anyone help me install a cwm for my 4.4.4 z1 c6903 unlocked bootloader (also rooted . version 4.4.4 with the .108 on the end) ?! I really want to flash a new custom rom for this phone and unlike samsung phones the tutorials on youtube for 4.4.4 are missing !
Click to expand...
Click to collapse
Hi,
Check this out ...
http://prntscr.com/4ow7hp
Download file, then unzip. Run BAT file and follow screen directions. You will end up with three recoveries to choose from.
Need help
Hello, i'm newbie here, trying to learn some stuff, i searched the forum but i couldn't find it, i think this page is most appropriate to post it here.
Well i want to flash a custom rom, but my first attempt went not good for me. I've lost my imei and panicked, anyway by flashing stock sony rom i recovered it.
Now i unlocked my bootloader again (it was locked again after i flashed my stock firmware back), rooted my phone, and learned that nandroid app can make a full backup, and even i screw things up (except hard bricking i guess), that backup will save me. So i downloaded it made a full back up, but it says "back up type: clockwork or TWRP,"
And i heard that TWRP is not for Xperia Z1. Thats why i decided to not install it,
Then i installed clockwork rom manager, it said "this app requires clocwork recovery", but i couldnt find a appropriate version of clockwork recovery, the ones i found on play store were for android 4.0.4, and mine is 4.4.4
You guys probably understand that i know almost nothing about this stuff, (i have only got what i read form forums), so what should i do, which version of clockwork should i install or is there any other supported apps that i can use my nandroid backup?
Soka, i checked your link but couldnt be sure about which link should i click.
And another question, do i still need titanium backup while i have nandroid?
Thanks in advance
My device is C6903
4.4.4
14.4.A.0.157
CWM Recovery
There two methods:
1. Unlock your bootloader and flash a custom kernel (Bootloader Unlock is required for flashing custom roms which are not stock based; for example cyanogenmod)
-> with a custom kernel you have cwm and often twrp also.
2. check this out: http://forum.xda-developers.com/xperia-z1/development/newroot-z1-t2807092
maybe you have to flash .108 kernel to use newroot, after rooting you can flash the actually kernel from your firmware....
---------- Post added at 07:27 PM ---------- Previous post was at 07:23 PM ----------
Özgün Özerk said:
Hello, i'm newbie here, trying to learn some stuff, i searched the forum but i couldn't find it, i think this page is most appropriate to post it here.
Well i want to flash a custom rom, but my first attempt went not good for me. I've lost my imei and panicked, anyway by flashing stock sony rom i recovered it.
Now i unlocked my bootloader again (it was locked again after i flashed my stock firmware back), rooted my phone, and learned that nandroid app can make a full backup, and even i screw things up (except hard bricking i guess), that backup will save me. So i downloaded it made a full back up, but it says "back up type: clockwork or TWRP,"
And i heard that TWRP is not for Xperia Z1. Thats why i decided to not install it,
Then i installed clockwork rom manager, it said "this app requires clocwork recovery", but i couldnt find a appropriate version of clockwork recovery, the ones i found on play store were for android 4.0.4, and mine is 4.4.4
You guys probably understand that i know almost nothing about this stuff, (i have only got what i read form forums), so what should i do, which version of clockwork should i install or is there any other supported apps that i can use my nandroid backup?
Soka, i checked your link but couldnt be sure about which link should i click.
And another question, do i still need titanium backup while i have nandroid?
Thanks in advance
My device is C6903
4.4.4
14.4.A.0.157
Click to expand...
Click to collapse
you can install twrp on z1 as well: http://forum.xda-developers.com/showthread.php?t=2261606
for cwm check my other post in this thread
hope this will help
Thanks, ive already unlocked my bootloader and rooted my phone as a mentioned above, just needed to know if i can use TWRP and CWM, got my answer thanks, both will work fine with Nandroid backup right? Should i prefer one over another? Cause i dont want any problems
Özgün Özerk said:
Thanks, ive already unlocked my bootloader and rooted my phone as a mentioned above, just needed to know if i can use TWRP and CWM, got my answer thanks, both will work fine with Nandroid backup right? Should i prefer one over another? Cause i dont want any problems
Click to expand...
Click to collapse
Hi there bro...
In the Link ...
Check this out ...
http://prntscr.com/4ow7hp ... download the one the red arrow is pointing at. Unzip and run BAT file. When Prompted onscreen connect device to PC.
This will install recoveries and an app called NDR Utils. With this app you can choose the primary recovery of your choice.
I prefer using Philz...(CWM) based. Important rule i've always followed make backups ( Nandroid).
Hi Xda members,
a quick question from my side
My htc m7 at&t converted into developer edition
running android lollipop 5.0.2 Stock with software number 7.17.1540.21
with root, unlocked bootloader and custom recovery
so i got a little security update over wifi
and i need ask that can i run the update with above mentioned situation
last time i had same little update and i ran it and my cell was stuck at bootloop
what i need do for a safe update install so i dont have to wipe my cell with a reflash becuz i know maybe am again gona stuck at bootloop or update wont install
ty
this forum always helped me so good
adeel617 said:
Hi Xda members,
a quick question from my side
My htc m7 at&t converted into developer edition
running android lollipop 5.0.2 Stock with software number 7.17.1540.21
with root, unlocked bootloader and custom recovery
so i got a little security update over wifi
and i need ask that can i run the update with above mentioned situation
last time i had same little update and i ran it and my cell was stuck at bootloop
what i need do for a safe update install so i dont have to wipe my cell with a reflash becuz i know maybe am again gona stuck at bootloop or update wont install
ty
this forum always helped me so good
Click to expand...
Click to collapse
Many ppl having issues updating stock rooted rom on this update and the previous one. Better to fully unroot the phone before attempting it. Using the 7.17.1540.21 RUU (see the link in my signature) is a good option imo but will wipe the phone unfortunately. Better to do a nandroid backup before updating (and copy the backup on your PC). Worst case, the update will cause a bootloop and you'll have to flash the 7.17.1540.21 ruu.
Might worth a try to backup your /data partition using twrp (save your backup on your pc), flash the 7.17.1540.21 ruu to unroot and remove any possible modifications, reflash twrp (but do not root), restore your /data backup, reflash the 7.17.1540.21 stock recovery and then try the ota update.
If its possible for you, I would really appreciate if you could share the ota update zip file so I can add the new files in the dev edition collection. To capture the ota zip file, download the ota update but select "install later". once downloaded go to your download folder and you should see a zip file starting with "OTA_M7_UL". Copy it to your computer and upload it (if you can).
u have a point about what u explained to me
i have been playing with android flashing and stuff from long and quite understand things and easy for me
and i didnt understood what happened when last time i got little update and then i had problem and phone went to bootloop
right now i might not be able to flash RUU because of my data in cell and work issues
if there is any solutions without flash let me knw and i cud easily upgrade from ota file
i will try upload and provide u link for it
ty.
Hi all, glad to find this
I have ..., guess what ? a RAZR i (Ok, it's a friend's one) that I repaired changing the mad battery after factory resets didn't do anything. Then found OTA was available, applied and the RAZR i was 4.1.2 IIRC and the new battery went OK. My mistake, another OTA went soon, which I applied too, making the RAZR i a 4.4.2 kitkat piece of crap (no more write access to sdcard, this is well known ... by the ones aware , know I'm one).
Then I thought I could make the phone free and search the web for days to try to understand, found a french forum which said I can't do anything without unlocking the bootloader, what I did.
They directed me there to remove the boot-logo-warning but that's a razr hd thread and nothing worked for me. I can't remember where I read I should have CWM to do this, but as the french guy said he rather like twrp I didn't do anything at the moment, only failed to flash some logo from fastboot with various errors....
Well, I'm there, and it's cool because I hope this is the good place to have answers to questions that are still in my mind for years, and 2/3 new ones... fortunately they'll overlap and self-resolve once I get one. I'm not at all skilled in android, I only flashed a phone in 2010 and that's why I still have android SKD in my ubuntu (I also have a xp box, but I couldn't do anything for my old Acer LiquidMT). As you see, I'm a vintage things amateur (... okay, I'm vintage too).
Now the scene is built, please let me dare ask what still puzzles me :
1) For the Razr i 4.4.2 (french from sfr-vodafone kia20.74 now used with another carrier) do I have to search a specifically dedicated recovery ? Parsing this RAZR i Q&A, I found twrp seems to the preferred recovery, but I'd rather like to get confirmation from skilled ones, and also for version.
2) And please tell me if I'm wrong thinking the [RECOVERY] Unofficial TWRP 3.0.2-0 thread aim is to bring support to the RAZR i which is not supported by official teamw.in ? (BTW, @Hazou, the 1st link in the thread - DataMedia - is dead)
3) Assumed I have to go the TWRP way and I only have currently the stock recovery, do I guess right the only way is download img.zip and extract then do
Code:
./fastboot flash recovery recovery.img
, then only after that the phone can be rooted ?
4) You see I'm puzzled here because I still don't have understood the logical path: is this one the good ? unlock boot loader -> fastboot flash reco -> is the device rooted at this point ? If not, install su from recovery option "install zip from sdcard", then it's done and I get a so called "rooted stock ROM" ? Then only I can figure installing a custom ROM if exists for the RAZR i ?
5) And I should always flash a custom ROM based on the same 4.4.2 android release as my current stock one AND disable OTA updates ?
I read so many threads with guys having issues with hard-bricked RAZR i and all are about ICS and JB, so I wander the only custom are for ICS or JB, and still don't understand why they want to revert back.
Thanks for advices.
1stStep said:
Hi all, glad to find this
I have ..., guess what ? a RAZR i (Ok, it's a friend's one) that I repaired changing the mad battery after factory resets didn't do anything. Then found OTA was available, applied and the RAZR i was 4.1.2 IIRC and the new battery went OK. My mistake, another OTA went soon, which I applied too, making the RAZR i a 4.4.2 kitkat piece of crap (no more write access to sdcard, this is well known ... by the ones aware , know I'm one).
Then I thought I could make the phone free and search the web for days to try to understand, found a french forum which said I can't do anything without unlocking the bootloader, what I did.
They directed me there to remove the boot-logo-warning but that's a razr hd thread and nothing worked for me. I can't remember where I read I should have CWM to do this, but as the french guy said he rather like twrp I didn't do anything at the moment, only failed to flash some logo from fastboot with various errors....
Well, I'm there, and it's cool because I hope this is the good place to have answers to questions that are still in my mind for years, and 2/3 new ones... fortunately they'll overlap and self-resolve once I get one. I'm not at all skilled in android, I only flashed a phone in 2010 and that's why I still have android SKD in my ubuntu (I also have a xp box, but I couldn't do anything for my old Acer LiquidMT). As you see, I'm a vintage things amateur (... okay, I'm vintage too).
Now the scene is built, please let me dare ask what still puzzles me :
1) For the Razr i 4.4.2 (french from sfr-vodafone kia20.74 now used with another carrier) do I have to search a specifically dedicated recovery ? Parsing this RAZR i Q&A, I found twrp seems to the preferred recovery, but I'd rather like to get confirmation from skilled ones, and also for version.
2) And please tell me if I'm wrong thinking the [RECOVERY] Unofficial TWRP 3.0.2-0 thread aim is to bring support to the RAZR i which is not supported by official teamw.in ? (BTW, @Hazou, the 1st link in the thread - DataMedia - is dead)
3) Assumed I have to go the TWRP way and I only have currently the stock recovery, do I guess right the only way is download img.zip and extract then do
Code:
./fastboot flash recovery recovery.img
, then only after that the phone can be rooted ?
4) You see I'm puzzled here because I still don't have understood the logical path: is this one the good ? unlock boot loader -> fastboot flash reco -> is the device rooted at this point ? If not, install su from recovery option "install zip from sdcard", then it's done and I get a so called "rooted stock ROM" ? Then only I can figure installing a custom ROM if exists for the RAZR i ?
5) And I should always flash a custom ROM based on the same 4.4.2 android release as my current stock one AND disable OTA updates ?
I read so many threads with guys having issues with hard-bricked RAZR i and all are about ICS and JB, so I wander the only custom are for ICS or JB, and still don't understand why they want to revert back.
Thanks for advices.
Click to expand...
Click to collapse
Hey 1stStep,
A lot off assumptions and questions. And most of them are right.
1. Afaik there are 2 recoveries for the RAZR I. Stock and my build TWRP 3.0.2-0 unofficial. (Thanks for the heads up about the link)
2. Answered in 1.
3. Yep. If your bootloader is unlocked it gives u the function to flash non-stock firmware to the phone. Stock firmware are signed to prevent normal users flashing wrong firmware. Firmware consist of a couple of images. Those images contain data for the partition, just like in your PC. Every image does something else. Most known are boot, data, system, recovery and cache. There are many more. Some needed, some unnecessary.
To answer your question: when u have flashed the TWRP recovery u override the stock one. The TWRP can flash zip files and images to the most known device partitions. From here on u can flash a superuser zip(gives root access on the current ROM/system). Make sure u have the right superuser zip. There are many.
4.
Path to root on stock:
Unlock bootloader->install custom recovery (TWRP)->install superuser zip->reboot and test root on device
Path to custom ROM:
Unlock bootloader->install custom recovery (TWRP)->install ROM zip and extra's if needed like (Gapps(needed for Google playstore and more))->reboot and play with your new ROM.
Off course if u already have the bootloader unlocked and installed a custom recovery, u can skip those.
In the recovery u can also make backups, called nandroid backup. Read up on them and everything u wanna do.
5. The only thing u never want/should do is flashing Android 4.0.4 stock firmware without prior modifications. This is because from 4.0.4 to 4.1.2 there was a change in bootloader (the thing u unlock). If u go back it corrupt a part of the firmware which is difficult to overcome or even impossible without some factory stuff. Everything above 4.1.2 is save. And can always be flashed. The latest stock is 4.4.2 (KIA 20.74) and latest available custom ROM is 4.4.4 (CM11 or soon Lineage 11).
Good luck!
Thanks so mush great dev to spend time and even surely repeat yourself (hope you're not under stress) for a newb.
In your answer for path to custom ROM you say "Unlock bootloader->install custom recovery (TWRP)->install ROM zip and extra's if needed like".
Do I have to understand custom ROMs are yet rooted (OOTB), or root yet made on stock will survive flashing the custom (I though flashing a custom was some kind of infant clear brain graft?
BTW, is it general good advice to test recovery before flashing? I found this in Moto Play unofficial recovery 3.0.2-r5 from Vache:
Code:
fastboot boot recovery.img
?
Thanks again
1stStep said:
Thanks so mush great dev to spend time and even surely repeat yourself (hope you're not under stress) for a newb.
Click to expand...
Click to collapse
Not at all , just replying if I have some time.
1stStep said:
In your answer for path to custom ROM you say "Unlock bootloader->install custom recovery (TWRP)->install ROM zip and extra's if needed like".
Do I have to understand custom ROMs are yet rooted (OOTB), or root yet made on stock will survive flashing the custom (I though flashing a custom was some kind of infant clear brain graft?
BTW, is it general good advice to test recovery before flashing? I found this in Moto Play unofficial recovery 3.0.2-r5 from Vache:
Code:
fastboot boot recovery.img
?
Thanks again
Click to expand...
Click to collapse
- Most custom roms are prerooted.
- Cyanogenmod/LineageOS are prerooted
- Root installed by a zip will not survive any system flashing (rom flashing)
- Any modification to your system partition will not survive and system flashing (rom flashing), though 1 exception:
- installed gapps package (google apps/play store etc.) will survive system flashing on cyanogenmod based roms. But only when updating the rom to a newer version on the same android version. So:
CM11 version 1 to CM11 version 2. (because of a special script in the install zip)
Pre testing a boot or recovery image is blocked on our bootloader. So u can't do it. It's a shame they did it. Working on any boot or recovery changes is a pain in the spoken ass.
If u flash the recovery with:
Code:
fastboot flash recovery recovery.img
there is nothing to be afraid off. The TWRP 3.0.2-0 recovery is well tested on this device.
Thank you again man for all detailed answer.
You're right, it's a shame all these locked things in our phones. I'm sure the guys that agree (our security, blah blah) with these ways to do won't be so happy the day their computers will be locked the same way.
bye bye Hazou.
[Edit] .... hmmm, how long does it take to flash? Yet a 1/4h elapsed and razr still says "Flashing recovery..."
Please, what is the md5 of the image (not the zip, this you give us)? Thanks
[Edit] : Downloaded twice and get md5sum 60dff26f3ee5e9338ee4a6f8cf7df098
but still same forever Flashing recovery ...
[Edit] : I've been puzzled for days being stuck in endless "Flashing recovery ..."
In the ended I decided, after saying 1 hour waiting a hypothetical "success/congrats message", NOT QUITTING the current fastboot screen, to select the recovery option in this very fastboot menu (on a Razr i : Vol- to highlight recovery item, then Vol+ to select) and bang I was in TWRP menu. What to do next once in, it is another story.