So I'm done with straight talk and when back to attend. I popped the Sim into my gsm unlocked x and it automatically detected the APN. It works except for MMS. So if it knows what APN to use then why doesn't MMS work?
I would check their site and get the settings, those do matter. I forgot to set my wife's Moto X and she couldn't send pics.
Sent from my MB886 using XDA Premium 4 mobile app
sicmadek said:
So I'm done with straight talk and when back to attend. I popped the Sim into my gsm unlocked x and it automatically detected the APN. It works except for MMS. So if it knows what APN to use then why doesn't MMS work?
Click to expand...
Click to collapse
there are all kinds of diffrent apns for AT&T these links are some of the diffrent ones i found
http://www.unlockit.co.nz/mobilesettings/settings.php?id=33
http://www.unlockit.co.nz/mobilesettings/settings.php?id=826
http://www.unlockit.co.nz/mobilesettings/settings.php?id=358
some of these might be the same im not really checking
Code:
NAME: (type anything you like, this doesn't matter. Use "AT&T Phone" or "My Phone", something like that. Just remember that every access point you create should have a different name.)
APN: wap.cingular
Proxy: (not set)
Port: (not set)
Username: [email protected]
Password: CINGULAR1
Server: (not set)
MMSC: http://mmsc.cingular.com
MMS Proxy: wireless.cingular.com
MMS port: 80
MCC: 310
MNC: 410
Authentication Type: (not set)
APN type: (not set)
APN protocol: IPv4
APN: enabled (may need to check this, not sure about your model)
Bearer: unspecified
Code:
Name: AT&T
APN: wap.cingular
Proxy: <Leave in Blank>
Port: <Leave in Blank>
Username: [email protected]
Password: cingular1
Server: <Leave in Blank>
MMSC: http://mmsc.cingular.com
MMS proxy: wireless.cingular.com
MMS port: 80
MCC: 310
MNC: 410
Authentication type: <Leave in Blank>
APN type: default,supl,mms OR Internet
APN Protocol: Leave it on the Default one
Code:
APN: phone
mmsc: http://mmsc.mobile.att.net
mms proxy: proxy.mobile.att.net
MMS port: 80
MCC:310
MNC:410
APN type: default,supl,mms,hipri
Code:
Name: ATT
APN: wap.cingular
Proxy: Not Set
Username: [email protected]
Password: Not Set
Server: Not Set
MMSC: http://mmsc.cingular.com
MMS Proxy: wireless.cingular.com
MMS Port: 80
MMS Protocol: 2.0
MCC: 310
MNC: 410
Authentication Type: not set
APN Type: Not Set
and here are some threads about AT&T APN settings
http://forum.xda-developers.com/showthread.php?t=1791526
http://forums.androidcentral.com/go...xus/155386-what-apn-settings-you-using-t.html
like i said some of them might be the same but the more you see one the better chance that it works. i hope this helps and good luck my friend
I've tried every APN I could find. Even copied ones from demo phones in the store. People receive when I send them but I can't receive them.
That's odd, did you set it, select it and then reboot? I know you've probably tried everything but just making sure so everyone can give you the best help.
Sent from my MB886 using XDA Premium 4 mobile app
treefrog20012003 said:
That's odd, did you set it, select it and then reboot? I know you've probably tried everything but just making sure so everyone can give you the best help.
Sent from my MB886 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Yes I select it and reboot every time. If its a minor change I just edit the existing APN so I don't know if that matters. I'm on a prepaid smartphone plan also so I don't know if that matters either.
I don't think it should matter if your prepaid. My wife is on straight talk and using a Moto X. I got her the unlocked version so she could use at&t or tmo SIM. She has the at&t nano SIM from the byop package at Wal-Mart. If you tried every apn out there then it could either be straight talk or the phone. To bad st has horrid customer service cause you'll never get an answer from them.
Sent from my MB886 using XDA Premium 4 mobile app
treefrog20012003 said:
I don't think it should matter if your prepaid. My wife is on straight talk and using a Moto X. I got her the unlocked version so she could use at&t or tmo SIM. She has the at&t nano SIM from the byop package at Wal-Mart. If you tried every apn out there then it could either be straight talk or the phone. To bad st has horrid customer service cause you'll never get an answer from them.
Sent from my MB886 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
i dumped straight talk and im now on official at&t. at&t is what im having the problems on. im sure there are more people on here with a unlocked x running official at&t prepaid. hopefully they will chime in with their apns.
I would just call them, at least they have decent customer service. If the info they give you didn't work then either it's a prob on their end or bad phone.
Sent from my MB886 using XDA Premium 4 mobile app
Here is my AT&T GoPhone APN settings, I will probably switch to their new family plan this month as its cheaper.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Beamed from my Moto X
FSRBIKER said:
Here is my AT&T GoPhone APN settings, I will probably switch to their new family plan this month as its cheaper.
Beamed from my Moto X
Click to expand...
Click to collapse
Those are what my phone defaults to from detecting the att Sim and that's what was on the demo x in the store. Do you have any problems with MMS or when you first used the x with that Sim?
I wonder if it has to do with me porting my number over from straight talk. We all know they have MMS problems.
No but I'd call AT&T at this point, sounds like someone didn't setup your line correctly.
Beamed from my Moto X
FSRBIKER said:
No but I'd call AT&T at this point, sounds like someone didn't setup your line correctly.
Beamed from my Moto X
Click to expand...
Click to collapse
I did call them and there is a ticket in for it. They are supposed to fix or get back to me by wed.
treefrog20012003 said:
I don't think it should matter if your prepaid. My wife is on straight talk and using a Moto X. I got her the unlocked version so she could use at&t or tmo SIM. She has the at&t nano SIM from the byop package at Wal-Mart. If you tried every apn out there then it could either be straight talk or the phone. To bad st has horrid customer service cause you'll never get an answer from them.
Sent from my MB886 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Treefrog, I have the same unlocked GSM Tmobile MotoX that your wife has. When she uses the ATT sim with Straigh Talk, does she get LTE or just the HSPA+? Next month I was going to try but I cannot find a definitive answer if the LTE works or not.
Thanks!
Lance
You don't even need that second setting for MMS it should be all on att phone. It should go as followed
LTE Configuration
Name: ATT Phone
APN: phone
Proxy: Not set
Port: Not set
Username: Not set
Password: Not set
Server: Not set
MMSC:*http://mmsc.mobile.att.net
MMS proxy: proxy.mobile.att.net
MMS Port: 80
MCC: 310
MNC: 410
Authentication type: None
APN Type: default,mms,supl,hipri,fota
APN protocol: IPv4
APN Roaming protocol: IPv4
Turn APN on/off: APN turned on
Bearer: Unspecified
Mobile Virtual Network Operator Type: None
Mobile Virtual Network Operator Value: Not set
MOTO X
---------- Post added at 12:49 PM ---------- Previous post was at 12:48 PM ----------
[email protected] said:
You don't even need that second setting for MMS it should be all on att phone. It should go as followed
LTE Configuration
Name: ATT Phone
APN: phone
Proxy: Not set
Port: Not set
Username: Not set
Password: Not set
Server: Not set
MMSC:*http://mmsc.mobile.att.net
MMS proxy: proxy.mobile.att.net
MMS Port: 80
MCC: 310
MNC: 410
Authentication type: None
APN Type: default,mms,supl,hipri,fota
APN protocol: IPv4
APN Roaming protocol: IPv4
Turn APN on/off: APN turned on
Bearer: Unspecified
Mobile Virtual Network Operator Type: None
Mobile Virtual Network Operator Value: Not set
I don't know what that dun is.
MOTO X
Click to expand...
Click to collapse
MOTO X
kinglance82 said:
Treefrog, I have the same unlocked GSM Tmobile MotoX that your wife has. When she uses the ATT sim with Straigh Talk, does she get LTE or just the HSPA+? Next month I was going to try but I cannot find a definitive answer if the LTE works or not.
Thanks!
Lance
Click to expand...
Click to collapse
I'm not Treefrog but I can tell you that yes LTE is great on the Moto X with att Straight Talk. Just not as fast as AT&T LTE. But still faster than HSPA+. My brother has the unlocked T-Mobile Moto X on att Straight talk. Phone testing says network type LTE
And if you need I can supply you with the apn he is using
Sent from my locked up, rooted XT1058 using Tapatalk
Thanks for information! So you have to enter special numbers in the settings to get it to work with LTE?
SHOOTEMUP2.0 said:
I'm not Treefrog but I can tell you that yes LTE is great on the Moto X with att Straight Talk. Just not as fast as AT&T LTE. But still faster than HSPA+. My brother has the unlocked T-Mobile Moto X on att Straight talk. Phone testing says network type LTE
And if you need I can supply you with the apn he is using
Sent from my locked up, rooted XT1058 using Tapatalk
Click to expand...
Click to collapse
Well I have ATT straight talk from the Nano sim. After going from Tmobile, it seems the internet on ST like to turn off all the time, and is way slower than Tmobile's. Looks like next month I will be trying Cricket.
kinglance82 said:
Thanks for information! So you have to enter special numbers in the settings to get it to work with LTE?
Click to expand...
Click to collapse
Related
Just got my Note straight from the UK, unlocked. Been on the phone with ATT about 6 times. I can send and recieve calls, texts - but no DATA. They can't seem to figure out why it will not pick up the ATT Data Network. Sim, EIN all linked, but no joy.
I am a noob, sorry - any ideas. I hate to send the phone back.
Any ideas ?
Update - Funk2641's response below (no APN was entered) - fixed it the issue.
Still, ATT would not give me a 4G smartphone plan - even though the H+ shows up next to the clock ? Initial Speedtests look like the same as my Infuse, Atrix and 4S.
Thanks everybody (Funk2641) for your help ! I hope this thread saves some agony for many as this phone is hitting the states. Don't know if I will tread in Eurospec for the Nexus, as I will want to hold that one in my hand first.
Also, this is a great phone - speed, battery life and the screen is fantastic !
Did you put the APN in correctly?
Name: AT&T
APN: wap.cingular
Proxy: leave blank
Port: leave blank
Username:[email protected]
Password:CINGULAR1
Server: leave blank
MMSC: http://mmsc.cingular.com
MMS Proxy: wireless.cingular.com
MMS Port: 80
MCC:310
MNC:410 (note. this could also be 310, 41 or 15)
APN Type: leave blank
Go to Settings --> Wireless and Network --> and Access Point Names. You might have to make a new apn. (like I did)
No, I will give it a try.
Thx.
please keep posted.....I'll be on Att Friday
I will follow this thread since I will also switch from T-mobile to AT&T.
I too have the same issues. I actually used a few different apns and got edge to work poorly, I sighed and told myself ICS would fix it all up better and to just enjoy the extra battery life of 2g now, God I hope a get this cleared up
Sent from my GT-N7000 using xda premium
Technically, the Note is just a big SGS2. There's no reason on the phone side you should be having a problem using the Cingular APN. I'm using a ISGS2 and a UK 3G Tab 10.1 on AT&T with no problem. It's either something with the provisioning of your account or your Note may not have the right bands (Asian?). The latter is unlikely if you ordered it from the UK. Try reseting the APN to default under network settings. Also, if you're on a legit 4G plan there's a specific APN that you can find on the ASGS2 forum.
Here is another APN that works, I had the same issue
For APN settings use the name ATT and then for APN the word phone. Leave everything else blank-what is needed will get filled in automatically. Click the APN when you finish adding it and the radio button turns green to indicate it is working. The advantage to this APN setting is it gives you clear access and data speeds are not limited by ATT.
Those apns didn't work and I too a would doubt my phone bring the Asian version,.this version of gingerbread has the option to suspend my data network from holding down the power button maybe the software isn't...... I don't know I have no clue but my apns are normal but when's search they don't come up
In the list automatically so something a wrong
and I came from a hspa+ phone so my plan is already to go, I called to double check
to op, glad you got it straightened out...who did you order from and how much?
Funk2641 said:
Did you put the APN in correctly?
Name: AT&T
APN: wap.cingular
Proxy: leave blank
Port: leave blank
Username:[email protected]
Password:CINGULAR1
Server: leave blank
MMSC: http://mmsc.cingular.com
MMS Proxy: wireless.cingular.com
MMS Port: 80
MCC:310
MNC:410 (note. this could also be 310, 41 or 15)
APN Type: leave blank
Go to Settings --> Wireless and Network --> and Access Point Names. You might have to make a new apn. (like I did)
Click to expand...
Click to collapse
My phone came with no apn settings. It was from europe ( ? Polish )
I had to manually enter the settings.
Pretty much the same as what is listed here ( got from SGSII forum )
WOrks great.
FOr those not working, try leaving the username and password blank
It should also work
drgopoos said:
My phone came with no apn settings. It was from europe ( ? Polish )
I had to manually enter the settings.
Pretty much the same as what is listed here ( got from SGSII forum )
WOrks great.
FOr those not working, try leaving the username and password blank
It should also work
Click to expand...
Click to collapse
Doc, I need it by the weekend like a drug, can you suggest a place to get it from. I'm Stateside and on AT&T if it helps!
drgopoos said:
My phone came with no apn settings. It was from europe ( ? Polish )
I had to manually enter the settings.
Pretty much the same as what is listed here ( got from SGSII forum )
WOrks great.
FOr those not working, try leaving the username and password blank
It should also work
Click to expand...
Click to collapse
Hi,
What kind of Internet speed you are getting? Anyways you can do a speedtest and let us know? Please?
Thank you.
the.mister.d said:
Hi,
What kind of Internet speed you are getting? Anyways you can do a speedtest and let us know? Please?
Thank you.
Click to expand...
Click to collapse
I got between 6.02 and 7.73 down; 1.08 - 1.09 up in Atlanta GA
Funk2641 said:
Did you put the APN in correctly?
Name: AT&T
APN: wap.cingular
Proxy: leave blank
Port: leave blank
Username:[email protected]
Password:CINGULAR1
Server: leave blank
MMSC: http://mmsc.cingular.com
MMS Proxy: wireless.cingular.com
MMS Port: 80
MCC:310
MNC:410 (note. this could also be 310, 41 or 15)
APN Type: leave blank
Go to Settings --> Wireless and Network --> and Access Point Names. You might have to make a new apn. (like I did)
Click to expand...
Click to collapse
with the note you need to set manually the APN?did not set automatically?After insert the SIM Card and restart is not set?
Funk2641 said:
I got between 6.02 and 7.73 down; 1.08 - 1.09 up in Atlanta GA
Click to expand...
Click to collapse
That's nice! Thank you!
I will be ordering mine this weekend. Not sure though which place yet !
Waiting to see if I can get it any cheaper from India. Have folks coming from India to NY in two weeks. Lets see!!
Thank you again!
I cannot connect to at&t. under APN i get "no items" and cannot get to a place to enter apn settings.
"use packet data" is selected
network mode is gsm/wcdma (auto mode) is selected
"search networks shows select automatically, at&t, and at&t. I have tried all three
i get regestered on network, but still will not connect help!
I am on the iphone plan with unlimited data, worked just fine in galaxy tab original 7"
i tried using funks apn settings and i still have nothing, i came from an atrix where i always got H+ and now here are me speeds, my speed test was done in detroit, i live in NJ my ping was 317, U 144 kbps D 155 kbps, i have no idea what is wrong with this phone but att can get going on it, i called and they have nothing for me!!! i dont know what to do
What plans are you guys, please?
(Anyone on month to month $50 unlimited?
There are two different APNs to use depending on what data plan you're on. If you're using a MediaNet or Data for non-Smartphones plan (3G) you need to use the Cingular APN. If you're on a legit 4G plan you need to use the special APN for 4G phones. If you reverse it, you'll get no data. For those of you on the 4G plan, go in to the APN settings. When you press menu, there's a reset to default option. It should pull the 4G settings down automatically. If you're on a 3G plan don't do this and instead manually enter the below settings. If you do this correctly you should get data. If you have a quad-band phone and still can't get data it's something with your account settings and not the h/w.
Cingular APN from the SGS2:
Name: Cingular 410
APN: wap.cingular
Proxy: null
Port: null
Username: [email protected]
Password: CINGULAR1
Server: cingulargprs.com
MMSC: http://mmsc.cingular.com
MMS Proxy: wireless.cingular.com
MMS Port: null
MCC: 310
MNC: 410
Authentication type: null
APN Type: internet + mms
4G APN from ASGS2 (There are two)
Name: ATT PHONE
Everything null except
MCC 310
MNC 410
APN type: Internet
Name: ATT WAP
APN: wap.cingular
Proxy: wireless.cingular.com
Port: 80
MMSC: http://mmsc.cingular.com
MMS Proxy: wireless.cingular.com
MMS Port: 80
MCC: 310
MNC: 410
APN Type: mms,supl
My employer provides me with cell service and to date hasn't cared if I use the Blackberry they provide or put the AT&T SIM in a personal phone. Provided I don't hassle the phone support staff with problems I created, of course. I've used the same SIM in 3 different phones over the past year and haven't had a single issue. I just got a used Atrix HD and discovered that it uses a micro-SIM instead of a regular size. I used a template and cut it down to size (and I think I did it correctly). I put it in the AHD and the SIM is recognized as AT&T but I cannot get data service. On first use with the bone stock ROM, I got a text message and was able to reply to it. Because I have no intention of staying stock, over the past two hours I've done the following:
Rooted
Unlocked bootloader
Installed the ATT-US_BuildA ROM
Wiped that and installed CM10.1 nightly from 05/16
I've not been able to get any data service and now the status is 'In service' for Service state, 'Disconnected' for Mobile network state, and 'Unknown' for Phone Number. Even after cutting down the SIM, I can put it back in my Blackberry and voice and data work just fine. Thus I know the SIM is healthy. Questions:
Is the mini-card slot in the AHD that finicky that a mm difference in card size will dork it up?
The SIM is several years old now. Is it obsolete for the AHD (not withstanding size)?
Are there any settings in the phone that I'm overlooking? The eBay seller was in the US but I do not know the original location of the phone.
Thanks for any advice you can provide. Unfortunately, I can't take it to an AT&T store because the account is my employer's. And my employer really doesn't want to deal with my issue that only exists because they were nice and turned a blind eye to me.
maybe you need to change your APN settings go to settings and under wireless and networks select "more...."
then mobile networks and then access point names select the menu option in the top right and select "New APN" and enter the info below
Name: Cingular 410
APN: wap.cingular
Proxy: Blank
Port: Blank
Username: [email protected]
Password: CINGULAR1
Server: cingulargprs.com
MMSC: http://mms.cingular.com
MMS Proxy: wireless.cingular.com
MMS Port: Blank
MCC: 310
MNC: 410
Authentication type: Blank
APN Type: default,supl,mms
APN protocol: leave as is
Bearer: leave as is
For 4G
Name: AT&T HSPA+
APN: phone
Proxy: Blank
Port: Blank
Username: blank
Password: blank
Server: blank
MMSC: http://mmsc.mobile.att.net
MMS Proxy: proxy.mobile.att.net
MMS Port: 80
MCC: 310
MNC: 410
Authentication type: Blank
APN Type: default,supl,mms,hipri
APN protocol: leave as is
Bearer: leave as is
Thank you!!!!!!!!!
The 4G settings were successful and I'm good to go. I'm very grateful and thanks again!
No problem glad to hear it worked.
Does anyone have a T-Mobile Moto X running on Net10 (ATT network) and getting LTE working?
If so, what APN settings are you using?
I purchased a nano ATT Net10 SIM from a reseller who cut it down to size, and it came with instructions which make me believe it might be an old SIM because the enclosed directions said to use:
Name: NET10
APN: att.mvno
Proxy: proxy.mvno.tracphone.com
Port: 80
MMSC: http://mmsc.cingular.com
MMS Proxy: 66.209.11.33
MMS Port: 80
-----------------and additional info on various websites also suggest:
MCC: 310
MNC: 410
Auth Type: PAP
APN Type: default,supl,mms
If I delete the main proxy listed above and leave it blank, I can connect with 4G (HSPA+) but don't see LTE coverage areas. If I don't delete the proxy, I get nothing.
The settings for a new ATT SIM are very different, and didn't seem to work at all. Is it possible to even get LTE with the old SIM? I'm new to this SIM game. If I have to get a new SIM, can my existing 30 days be transferred to a different card?
Also, for the first couple hours it all acted very wacky. It would work, and then all of a sudden put up the icons saying the phone didn't have a SIM card at all. I'd pop out/in the card and reboot, and it would come back. Lost it this way 3 or 4 times, but it hasn't happened in a number of hours now. Would this suggest the cut-down nano SIM wasn't the best trimming job?
larry62 said:
Does anyone have a T-Mobile Moto X running on Net10 (ATT network) and getting LTE working?
If so, what APN settings are you using?
I purchased a nano ATT Net10 SIM from a reseller who cut it down to size, and it came with instructions which make me believe it might be an old SIM because the enclosed directions said to use:
Name: NET10
APN: att.mvno
Proxy: proxy.mvno.tracphone.com
Port: 80
MMSC: http://mmsc.cingular.com
MMS Proxy: 66.209.11.33
MMS Port: 80
-----------------and additional info on various websites also suggest:
MCC: 310
MNC: 410
Auth Type: PAP
APN Type: default,supl,mms
If I delete the main proxy listed above and leave it blank, I can connect with 4G (HSPA+) but don't see LTE coverage areas. If I don't delete the proxy, I get nothing.
The settings for a new ATT SIM are very different, and didn't seem to work at all. Is it possible to even get LTE with the old SIM? I'm new to this SIM game. If I have to get a new SIM, can my existing 30 days be transferred to a different card?
Click to expand...
Click to collapse
I get 6-8 MBPS (and up to 21 MBPS) down with these settings Net10 on AT&T northeast Atlanta:
APN: tfdata
MMSC: http://mms-tf.net
MMS proxy: mms3.tracfone.com
MMS port: 80
MCC: 310
MNC: 410
APN type: default,supl,mms
APN protocol: IPv4
APN roaming protocol: IPv4
Bearer: Unspecified
MVNO type: None
All other fields are blank.
I source sims on eBay $0.99 per piece from a seller in FL who ships same day free shipping.
mrmwroot said:
I get 6-8 MBPS (and up to 21 MBPS) down with these settings Net10 on AT&T northeast Atlanta:
APN: tfdata
MMSC: http://mms-tf.net
MMS proxy: mms3.tracfone.com
MMS port: 80
MCC: 310
MNC: 410
APN type: default,supl,mms
APN protocol: IPv4
APN roaming protocol: IPv4
Bearer: Unspecified
MVNO type: None
All other fields are blank.
I source sims on eBay $0.99 per piece from a seller in FL who ships same day free shipping.
Click to expand...
Click to collapse
Is the LTE symbol lighting up? Mine came from Quality One Wireless in FL for $0.99 (http://www.net10wirelessphones.com/Net10-sim-card-byop-kit.html). Don't know if it's the same seller as you had on ebay. Did yours come with a red activation card showing the settings you used, or ones more like the ones I listed? I found more information about settings which made me try the one I have at: http://www.prepaidphonenews.com/2012/09/how-to-setup-straight-talk-data-and-mms.html
larry62 said:
...a red activation card showing the settings you used, or ones more like the ones I listed?
Click to expand...
Click to collapse
Good settings are the ones that work. Your mileage may vary.
Cheers.
I got same problemas here.
The tfdata APN don't work on my moto x .
But the mvno APN works but h+ no LTE any help?
Sent from my XT1058 using Tapatalk
I'm on NET10, and I run the stock APN settings given by the NET10 app on the Playstore, I was too lazy to reinput some of my old crazier APNs.
https://play.google.com/store/apps/details?id=com.tracfone.net10.datasettings&hl=en
I get LTE, and everything functions accordingly.
Don't worry about the sim card, I cut mine by hand, it takes a few bits to set up the radio and all the fit bits within. After the first day, everything is fine.
maniacopr said:
I got same problemas here.
The tfdata APN don't work on my moto x .
But the mvno APN works but h+ no LTE any help?
Sent from my XT1058 using Tapatalk
Click to expand...
Click to collapse
The tfdata (the APN that's also provided through the NET10 app in the Play store) APN is the correct one for getting LTE. I had the same problem, as I was unable to get data on tfdata and only getting HSPA+ on the wap.tracfone APN. I called the BYOP support line (1-855-333-CELL) and they verified I had the tfdata APN settings correct, then "updated my line." Boom, LTE.
gofunburnmann said:
The tfdata (the APN that's also provided through the NET10 app in the Play store) APN is the correct one for getting LTE. I had the same problem, as I was unable to get data on tfdata and only getting HSPA+ on the wap.tracfone APN. I called the BYOP support line (1-855-333-CELL) and they verified I had the tfdata APN settings correct, then "updated my line." Boom, LTE.
Click to expand...
Click to collapse
I'll give that a try soon. Got a new nano SIM I stamped out of a micro directly from NET10 and not a reseller. Need to port my existing Verizon number out via Google Voice and sell an existing Verizon Unlimited Data plan via an AoL before picking up NET10 again. Found HSPA+ pretty good during my trial run, so it should be even better with LTE. During my test I think the old SIM I was using created the problem as nothing using tfdata worked at all.
larry62 said:
I'll give that a try soon. Got a new nano SIM I stamped out of a micro directly from NET10 and not a reseller. Need to port my existing Verizon number out via Google Voice and sell an existing Verizon Unlimited Data plan via an AoL before picking up NET10 again. Found HSPA+ pretty good during my trial run, so it should be even better with LTE. During my test I think the old SIM I was using created the problem as nothing using tfdata worked at all.
Click to expand...
Click to collapse
I'm really pleased with the HSPA coverage, so much that I would've left it as is if I could've gotten MMS to work. It's nice having that fallback, especially indoors or out in the boonies.
I bought my SIM from Wal-Mart. Strange, I would've expected SIM cards from official channels would work better than the reseller ones.
Got my wife the verizon version of the s5 TO USE ON ATT. Making phone calls and data are working perfectly, however, she is unable to send picture text messages. What should the corect apn settings be? Even though I copied the below from a friend's ATT Galaxy S5, the Multimedia messaging portion will not work. Pictures just say "failed".
I have
Name ATT
APN wap.cingular
Username [email protected]
Password cingular1
MMSC http://mmsc.cingular.com
Mms proxy wireless.cingular.com
Mms port 80
Mcc 310
Mnc 410
Apn type default,supl,mms
All other fields blank
telegraph0000 said:
Got my wife the verizon version of the s5. Making phone calls and data are working perfectly, however, she is unable to send picture text messages. What should the corect apn settings be?
I have
Name ATT
APN wap.cigular
Username [email protected]
Password cingular1
MMSC http://mmsc.cingular.com
Mms proxy wireless.cingular.com
Mms port 80
Mcc 310
Mnc 410
Apn type default,supl,mms
All other fields blank
Click to expand...
Click to collapse
You have a Verizon phone with partial AT&T apns and Cingular apns are you on Verizon? ?
"No soup for you! Come back one year!!" Sent from my ViSiX powered SG-G900A Rockin XKrome
s5freak said:
You have a Verizon phone with partial AT&T apns and Cingular apns are you on Verizon? ?
"No soup for you! Come back one year!!" Sent from my ViSiX powered SG-G900A Rockin XKrome
Click to expand...
Click to collapse
I copied this information from a friend's ATT Galaxy S5. not correct, I presume... .. .
No, not on Verizon. I have ATT. The S5 is a Verizon phone and using it on ATT. What should the correct apns be?
Just like these screen shots don't add anything else
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
"No soup for you! Come back one year!!" Sent from my ViSiX powered SG-G900A Rockin XKrome
Name: ATT Phone
APN: phone
Proxy: Not set
Port: Not set
Username: Not set
Password: Not set
Server: Not set
MMSC: http://mmsc.mobile.att.net
MMS proxy: proxy.mobile.att.net
MMS port: 80
MMS protocol: WAP 2.0
MCC: 310
MNC: 410
Authentication type: Not set
APN type: default,admin,fota,mms,supl,hipri,dun,att
APN enable/disable: Enabled
Bearer: Unspecified
Sent from my SAMSUNG-SM-G870A using Tapatalk
Thank you,
I tried the one provided by s5Freak, sent a test mms (with picture), took 10 minutes to send, but it succeeded. Tried it again and it kept trying all night long-
will try yours as well XRange. Thank you!
telegraph0000 said:
Thank you,
I tried the one provided by s5Freak, sent a test mms (with picture), took 10 minutes to send, but it succeeded. Tried it again and it kept trying all night long-
will try yours as well XRange. Thank you!
Click to expand...
Click to collapse
Mine came from stock AT&T G900A rom did you make sure under network operator you selected automatic?
"No soup for you! Come back one year!!" Sent from my ViSiX powered SG-G900A Rockin XKrome
telegraph0000 said:
Thank you,
I tried the one provided by s5Freak, sent a test mms (with picture), took 10 minutes to send, but it succeeded. Tried it again and it kept trying all night long-
will try yours as well XRange. Thank you!
Click to expand...
Click to collapse
That's the Apn I used for my S5, I could send mms from home in seconds, but couldn't send anything while on vacation in Florida. I use the same apn for my Nexus 5 and it's the same deal, so...
Isn't only band that work from Verizon phone on AT&T network the wcdma, are lte bands. As all of not most of sms, mms are over mobile network on AT&T not wifi. Forgive me if I said to much as its time to lay down, been up all night.
Sent from my SAMSUNG-SM-G870A using Tapatalk
s5freak said:
Mine came from stock AT&T G900A rom did you make sure under network operator you selected automatic?
"No soup for you! Come back one year!!" Sent from my ViSiX powered SG-G900A Rockin XKrome
Click to expand...
Click to collapse
Hmmm...network operators is greyed out. Not a choice
XRange said:
Name: ATT Phone
APN: phone
Proxy: Not set
Port: Not set
Username: Not set
Password: Not set
Server: Not set
MMSC: http://mmsc.mobile.att.net
MMS proxy: proxy.mobile.att.net
MMS port: 80
MMS protocol: WAP 2.0
MCC: 310
MNC: 410
Authentication type: Not set
APN type: default,admin,fota,mms,supl,hipri,dun,att
APN enable/disable: Enabled
Bearer: Unspecified
Sent from my SAMSUNG-SM-G870A using Tapatalk
Click to expand...
Click to collapse
Looks like this did it. Thank you!
I flashed the phone with the alliance rom, and copied the same APN settings that worked before. But now it doesn't... .. .settings worked with Kitkat rom, don't work with Alliance. Any clues?
I know this is an older thread but for anyone who is still searching for a solution, as I was when I found this thread, changing the MMs Port from 80 to 8080 fixed the issue for me. I can now send pictures from my Verizon S6 that I am using on the AT&T network.
Ok so I tried every thing in this thread and nothing works. I have a Verizon unlocked galaxy s5 using it with att....everything works but mms...which I desperately need for work and other things. I've called att, Samsung and Verizon and no help from any. Please help!
Update to settings!
I have a verizon S5 and the data hasn't worked for the longest time with these settings. However, when I changed these settings:
Bearer: LTE
APN: PHONE
I was finally able to get H+ data and MMS. May be an old thread and resolved for the OP but hopefully may be of some help to others looking to fix it.
Glock91 said:
I have a verizon S5 and the data hasn't worked for the longest time with these settings. However, when I changed these settings:
Bearer: LTE
APN: PHONE
I was finally able to get H+ data and MMS. May be an old thread and resolved for the OP but hopefully may be of some help to others looking to fix it.
Click to expand...
Click to collapse
Hey! could you post all of your APN settings? I've been trying to get my unlocked s5 to let me use mms for some time now. Data works, just no mms.
indiana202 said:
Hey! could you post all of your APN settings? I've been trying to get my unlocked s5 to let me use mms for some time now. Data works, just no mms.
Click to expand...
Click to collapse
I did a combination of XRange and Glock's settings to get my Verizon Note 4 working on AT&T:
Name: ATT Phone
APN: PHONE
Proxy: Not set
Port: Not set
Username: Not set
Password: Not set
Server: Not set
MMSC: http://mmsc.mobile.att.net
Multimedia message proxy: proxy.mobile.att.net
Multimedia message port: 8080
MCC: 310
MNC: 410
Authentication type: Not set
ATP type: default,admin,fota,mms,supl,hipri,dun,att
APN protocol: IPv4
APN roaming protocol: IPv4
Bearer: LTE
Mobile virtual network operator type: None
This get's me H+ service (no LTE). Data AND MMS work as well.
Give it a shot. I think Note 4 and S5 would work similarly. Hope that helps.
I was recently given an "old" Galaxy S5 (Verizon) by a relative and immediately impregnated it with an AT&T SIM. Problem: no data connection if WiFi was not available. I tried for an entire day to get rid of the "offline" message with no luck. Every combination of APN entries found via Google didn't work...until I came across this thread and the above suggestion. Changes made: 80 became 8080, and Bearer became LTE. Other entries were already in place. Success.
Next challenge: downgrading 6.0.1 so that I can root.
I just got back from the ATT Store. I have a Verizon Note 4 Unlocked Global and was on MetroPCS Family Plan, well the family is no longer so I needed to bail. I got the H only and no MMS/Internet. I called the guy back to ask if he is sure the IMEI is registered, he said yes as well as "You probably won't be able to use this phone."
Changing the APN to PHONE and Bearer to LTE worked. I have H+ now, which is painfully slow but at least it works. Thanks
Time to ditch the Note 4 and upgrade to something that won't cost $900
I've tried to ask this on reddit but I could not get any help. I have seen a thread on the nexus 6P but not for the nexus 6. WiFi calling does not activate, I have metropcs but I've seen people have WiFi calling activated on metro. It does say IWLAN on sim status but I can't make calls or texts. I have tried many WiFi networks and have flashed the stock image but still can't connect. E911 address is updated as well. http://imgur.com/a/6ZP9h I am on chroma 12/10, i manually flashed 6.0.1 stock, i also used the tmobile lollipop image for wifi calling and not luck, any help? Thanks
Jaimesco12 said:
I've tried to ask this on reddit but I could not get any help. I have seen a thread on the nexus 6P but not for the nexus 6. WiFi calling does not activate, I have metropcs but I've seen people have WiFi calling activated on metro. It does say IWLAN on sim status but I can't make calls or texts. I have tried many WiFi networks and have flashed the stock image but still can't connect. E911 address is updated as well. http://imgur.com/a/6ZP9h any help? Thanks
Click to expand...
Click to collapse
simple question.. have you turned wifi calling on?
simms22 said:
simple question.. have you turned wifi calling on?
Click to expand...
Click to collapse
Yes I have, I went to settings and enabled it. It says WiFi preferred but really never does anything.
Jaimesco12 said:
Yes I have, I went to settings and enabled it. It says WiFi preferred but really never does anything.
Click to expand...
Click to collapse
i use tmobile, and it works. just doing a search for metro pcs, it says that metro pcs people need to use an app for wifi calling calked Joyn(play store app) http://www.metrorumors.com/metro-pcs-service/wifi-calling/ maybe you should try?
simms22 said:
i use tmobile, and it works. just doing a search for metro pcs, it says that metro pcs people need to use an app for wifi calling calked Joyn(play store app) http://www.metrorumors.com/metro-pcs-service/wifi-calling/ maybe you should try?
Click to expand...
Click to collapse
That app is for CDMA phones back in 2013 I believe. Metro is now gsm like tmo.
Jaimesco12 said:
That app is for CDMA phones back in 2013 I believe. Metro is now gsm like tmo.
Click to expand...
Click to collapse
ahhh.. that didnt have a date on it, so i wasnt sure? do both your wifi calling setting say wifi preferred? both as in the main phone settings and in your phone settings? mine never worked until about 3 months ago, now it always works.
Yeah both are enabled. For some reason it does say IWLAN on sim status.
Jaimesco12 said:
Yeah both are enabled. For some reason it does say IWLAN on sim status.
Click to expand...
Click to collapse
i dont know what iwlan is? anyways, when i do have wifi calling active, it tells me in my pulldown..
I'm currently at a place with no signal. This is what I get.
Jaimesco12 said:
I'm currently at a place with no signal. This is what I get.
Click to expand...
Click to collapse
yea, your wifi calling is messed up. maybe flashing marshmallow again would fix it.
simms22 said:
yea, your wifi calling is messed up. maybe flashing marshmallow again would fix it.
Click to expand...
Click to collapse
Tried twice last week, not sure if it would help.
Jaimesco12 said:
Tried twice last week, not sure if it would help.
Click to expand...
Click to collapse
oh
have you called metro pcs to discuss wifi calling with their tech support?
simms22 said:
oh
have you called metro pcs to discuss wifi calling with their tech support?
Click to expand...
Click to collapse
Yes they did not help I called numerous amount of times and still no help.
Jaimesco12 said:
Yes they did not help I called numerous amount of times and still no help.
Click to expand...
Click to collapse
but i figured that
Jaimesco12 said:
I've tried to ask this on reddit but I could not get any help. I have seen a thread on the nexus 6P but not for the nexus 6. WiFi calling does not activate, I have metropcs but I've seen people have WiFi calling activated on metro. It does say IWLAN on sim status but I can't make calls or texts. I have tried many WiFi networks and have flashed the stock image but still can't connect. E911 address is updated as well. http://imgur.com/a/6ZP9h I am on chroma 12/10, i manually flashed 6.0.1 stock, i also used the tmobile lollipop image for wifi calling and not luck, any help? Thanks
Click to expand...
Click to collapse
I recently got a Huaweii Nexus 6p about a weak ago and this was the one feature i needed the most due to poor reception in some parts of my home. After many days so searching xda, t-moble subreddit, and other help forums. I also made many calls to customer service and still getting no result. As of the other day i can confirm that I've found a solution.
1. Submit your e911 address to metropcs. You can the my metro app from the playstore or call customer service and give it to them so they can put it in the system manually.
2. Go into the apn settings and maually delete each default metro pcs apn one by one. After deleteing them you should notice that the apns will default to showing t-mobile's apn settings. (Ex: T-MobileGPRS, T-Mobile IMS, T-Mobile MMS)
3. Click on the first apn that says "T-MobileGPRS" that is the setting we will edit. The other apns you can leave as is.
4. Once in the T-MobileGPRS setting change the Name from T-MobileGPRS to "MetroPCS".
5. Change the the APN from fast.tmobile.com to "fast.metropcs.com" . Leave all other settings as is and then save the changes.
After that give it a few minutes then you will notice it says "T-Mobile Wifi Caliing" make a test call and you should see in the dialer screen "wifi calling". From the there you will be good to go!
** I can also confirm that this solution also activates VoLTE and data and mms also work with not issues at all!
sbonhomme said:
I recently got a Huaweii Nexus 6p about a weak ago and this was the one feature i needed the most due to poor reception in some parts of my home. After many days so searching xda, t-moble subreddit, and other help forums. I also made many calls to customer service and still getting no result. As of the other day i can confirm that I've found a solution.
1. Submit your e911 address to metropcs. You can the my metro app from the playstore or call customer service and give it to them so they can put it in the system manually.
2. Go into the apn settings and maually delete each default metro pcs apn one by one. After deleteing them you should notice that the apns will default to showing t-mobile's apn settings. (Ex: T-MobileGPRS, T-Mobile IMS, T-Mobile MMS)
3. Click on the first apn that says "T-MobileGPRS" that is the setting we will edit. The other apns you can leave as is.
4. Once in the T-MobileGPRS setting change the Name from T-MobileGPRS to "MetroPCS".
5. Change the the APN from fast.tmobile.com to "fast.metropcs.com" . Leave all other settings as is and then save the changes.
After that give it a few minutes then you will notice it says "T-Mobile Wifi Caliing" make a test call and you should see in the dialer screen "wifi calling". From the there you will be good to go!
** I can also confirm that this solution also activates VoLTE and data and mms also work with not issues at all!
Click to expand...
Click to collapse
I tried this and it did not work.. are you on band 12? It says I am on band 4. I'm not sure what to do, Volte did not work. It used to work with the same sim card on metropcs on my nexus 6.
selayan said:
I tried this and it did not work.. are you on band 12? It says I am on band 4. I'm not sure what to do, Volte did not work. It used to work with the same sim card on metropcs on my nexus 6.
Click to expand...
Click to collapse
What are the default apn settings for your device? I might have another solution for you.
sbonhomme said:
What are the default apn settings for your device? I might have another solution for you.
Click to expand...
Click to collapse
Here is what I currently have attached are the png images. My phone said they were not Jpeg so I could not upload them through tapatalk.
Disregard the first screenshot that was random.
selayan said:
Here is what I currently have attached are the png images. My phone said they were not Jpeg so I could not upload them through tapatalk.
Disregard the first screenshot that was random.
Click to expand...
Click to collapse
Alright looks like you have the same setup i did. I stumbled upon this new configuration after the original solution I had posted stopped working. So with your current apn settings
1. Delete all the the Metro PCS 260 apns.
2. From there you should only have the default T-Mobile apns that list T-Mobile GPRS, T-Mobile IMS, T-Mobile MMS.
3. Edit the "T-Mobile GPRS" apn and save the following configuration:
Name: MetroPCS
APN: fast.metropcs.com
Proxy: <Leave in Blank>
Port: <Leave in Blank>
Username: <Leave in Blank>
Password: <Leave in Blank>
Server: <Leave in Blank>
MMSC: <Leave in Blank>
MMS proxy: <Leave in Blank>
MMS port: <Leave in Blank>
MCC: 310
MNC: 260
Authentication type: <Leave in Blank>
APN type: default,supl
APN Protocol: ipv6
APN Roaming Protocol : ipv4
Bearer: unspecified
MVNO Type: None
from there save this apn.
4. Create another apn to the list with the following configuration:
Name: MetroPCS 260
APN: fast.metropcs.com
Proxy: <Leave in Blank>
Port: <Leave in Blank>
Username: <Leave in Blank>
Password: <Leave in Blank>
Server: <Leave in Blank>
MMSC: (add in the http:// before)mms.msg.eng.t-mobile.com/mms/wapenc
MMS proxy: <Leave in Blank>
MMS port: <Leave in Blank>
MCC: 310
MNC: 260
Authentication type: <Leave in Blank>
APN type: ia
APN Protocol: ipv4/ipv6
APN Roaming Protocol : ipv4/ipv6
Bearer: unspecified
MVNO Type: None
Save this apn when done.
5. From there you should have this list of apns: MetroPCS, MetroPCS 260, T-Mobile IMS, T-Mobile MMS.
Make sure the MetroPCS one is selected( The 1st in the list)
Almost forgot. To enable SMS texting over wifi:
--Go to Dialer; then dialpad
--dial *#*#4636#*#*
--Phone Information
--Turn on SMS over IMS.
From there if you once your done restart your phone and connect to a wireless network. And wait a few minutes then it should work from there. I used this setup and i can confirm that both wifi-calling is working & VoLTE. Let me know if this worked for you.
sbonhomme said:
Alright looks like you have the same setup i did. I stumbled upon this new configuration after the original solution I had posted stopped working. So with your current apn settings
1. Delete all the the Metro PCS 260 apns.
2. From there you should only have the default T-Mobile apns that list T-Mobile GPRS, T-Mobile IMS, T-Mobile MMS.
3. Edit the "T-Mobile GPRS" apn and save the following configuration:
Name: MetroPCS
APN: fast.metropcs.com
Proxy: <Leave in Blank>
Port: <Leave in Blank>
Username: <Leave in Blank>
Password: <Leave in Blank>
Server: <Leave in Blank>
MMSC: <Leave in Blank>
MMS proxy: <Leave in Blank>
MMS port: <Leave in Blank>
MCC: 310
MNC: 260
Authentication type: <Leave in Blank>
APN type: default,supl
APN Protocol: ipv6
APN Roaming Protocol : ipv4
Bearer: unspecified
MVNO Type: None
from there save this apn.
4. Create another apn to the list with the following configuration:
Name: MetroPCS 260
APN: fast.metropcs.com
Proxy: <Leave in Blank>
Port: <Leave in Blank>
Username: <Leave in Blank>
Password: <Leave in Blank>
Server: <Leave in Blank>
MMSC: (add in the http:// before)mms.msg.eng.t-mobile.com/mms/wapenc
MMS proxy: <Leave in Blank>
MMS port: <Leave in Blank>
MCC: 310
MNC: 260
Authentication type: <Leave in Blank>
APN type: ia
APN Protocol: ipv4/ipv6
APN Roaming Protocol : ipv4/ipv6
Bearer: unspecified
MVNO Type: None
Save this apn when done.
5. From there you should have this list of apns: MetroPCS, MetroPCS 260, T-Mobile IMS, T-Mobile MMS.
Make sure the MetroPCS one is selected( The 1st in the list)
Almost forgot. To enable SMS texting over wifi:
--Go to Dialer; then dialpad
--dial *#*#4636#*#*
--Phone Information
--Turn on SMS over IMS.
From there if you once your done restart your phone and connect to a wireless network. And wait a few minutes then it should work from there. I used this setup and i can confirm that both wifi-calling is working & VoLTE. Let me know if this worked for you.
Click to expand...
Click to collapse
Ok so I tried this and then I had no data connection. After some time all I had was H. I then tried enabling wifi and putting on airplane mode with wifi enabled.. phone said connect to a network to make a call. To get my data and mms back I had to remove all the APN's and reset to default. I left the three tmobile ones there and added the mmsc (http://mms.msg.eng...) to the Metro 260 apn and now I have LTE again and my MMS is working as well as texts.
I guess its because I am on band 4? If you download LTE Discovery what band does it say you are on? This is weird at least I had Volte on the nexus 6 with the same sim card on metropcs.