Related
I've got a pro2 (gsm ,non-customized version)recently,and tried to flash the "hard-spl" for it .
first,I used "Rhodium-HardSPL_V1_20R2" for unlocking .but when I executed it,my phone got nothing changed(thoerically,the screen should be changed into black)
so, I used "sspl-manu" for unlocking,but the screen stuck and had no respone.
eventually, I tried using Rhodium-HardSPL_V2_00R3, an error shown up that "Hard-SPL is for non-commercial purposes only, we have detected that you appear to already have unlocked a device, if you wish to unlock commercially , please e-mail [email protected] .com to discuss solutions"
here are my qustion
1,what' wrong with my phone and how to solve ?
2, does the error mean :I never be able to have my phone unlock for free?
3,can I flash the energy rom by sd card ,if the phone have not hard-spl?
P.S I've got net framework 3.5 and activesync4.5 on my pc
If you go into bootloader mode, what text is shown onscreen over the coloured bars?
(to go into the bootloader mode, hold down the Power and Volume Down buttons whilst soft resetting)
9761217 said:
I've got a pro2 (gsm ,non-customized version)recently,and tried to flash the "hard-spl" for it .
first,I used "Rhodium-HardSPL_V1_20R2" for unlocking .but when I executed it,my phone got nothing changed(thoerically,the screen should be changed into black)
so, I used "sspl-manu" for unlocking,but the screen stuck and had no respone.
eventually, I tried using Rhodium-HardSPL_V2_00R3, an error shown up that "Hard-SPL is for non-commercial purposes only, we have detected that you appear to already have unlocked a device, if you wish to unlock commercially , please e-mail [email protected] .com to discuss solutions"
here are my qustion
1,what' wrong with my phone and how to solve ?
2, does the error mean :I never be able to have my phone unlock for free?
3,can I flash the energy rom by sd card ,if the phone have not hard-spl?
P.S I've got net framework 3.5 and activesync4.5 on my pc
Click to expand...
Click to collapse
if you can't/don't want to donate and this is for personal use, you can request a free license at http://support.htc-unlocks.com/
I just bought a HTC G1 from an ebay user from USA.(I'm from Romania)
I did a hard reset on the phone and now when I put a sim I need to enter the unlock code and can`t turn wireless on if I chose not to enter the unlock code.
Are there any option on how to unlock the phone without the code, or to get past the 'fresh start' screen?
Two things you can do:
1st, contact the user back that sold you the G1. Ask them to obtain the unlock code from T-Mobile (USA) to send to you.
2nd, you can obtain the unlock code yourself by purchasing the unlock code from one of the site.
There are no option to unlock the phone without the unlock code. (as far as I know)
And what about the activation screen? how can i get past it?
Once you get the unlock code and put it in. You can activate your google account with your data plan. You might have to setup your APN setting thou.
Another thing you might or have to do is downgrade and root your phone. Then flash the custom ROM of your choice.
Done unlocking & activating, now it keeps restarting, what can I do? Also the battery lasts 1 day max
// also the screen remains black when I try to unlock (sometimes)
tachemario said:
Done unlocking & activating, now it keeps restarting, what can I do? Also the battery lasts 1 day max
// also the screen remains black when I try to unlock (sometimes)
Click to expand...
Click to collapse
First you want to find out if you are still on stock or you have a custom ROM on your G1.
If you have stock, then you have to root your G1 first.
If you phone has a custom ROM then you G1 has already been rooted. You can load other ROM that you want.
I tried to update to 1.6 but it says error line 1 etc. all the time.
Please help
I`m on stock & when I try to root it says to force close app
Also, i`m running android 1.5 & marketplace is beta & I can`t see all the stuff
Ohh! Boy here we go. You'll need to downgrade to RC29 (since your G1 is from US). Don't worry about the unlock. Once unlocked it stay unlock.
First you want to get ADB setup on your PC and have it setup with your G1.
http://forum.xda-developers.com/showthread.php?t=532719
Once you have that going then you can start with the downgrading to RC29. After you have downgraded, you will have to go through the activation screen again.
Once the activation screen is done, then you can do the rooting process.
http://theunlockr.com/2010/04/26/how-to-root-the-htc-g1dream/
After you have rooted, then you can flash the custom ROM.
Done, the phone is rooted but now I have some other issues with it.
First, my earpiece dosen`t work
Second, my screen sometimes dosen`t come 'back to life' when I try to unlock it
http://www.youtube.com/watch?v=0qk3FIs3Q-s&feature=related
this problem
Can anyone help me?
i know some of you have this problem and worries that something wrong happend during the process of unlocking your phone. well that's the same thing i was thinking about 3 days now and trying to figure it out how to fix this. i just a noobie here and new for all this android thingy but i guess im just lucky fixing it.
by reading again the thread of how to unlock. it mention there that your phone might have a sim lock. this might be the problem so i search some thread related to this and guess what a found the answer!
now here's how to fix it.
1. after unlocking your phone using msm7227_setool2. check if you have network signal so you won't do the step 2 of this thread.
2. now if there's no signal, open again your msm7227 folder (which is the unlock bootloader tool) and you will see there's another tool which is ms7227_semc.
3. put to debugging mode then connect your usb to your PC.
4. run the ms7227_semc and wait till it done.
5. reboot your phone and you already have network signal again.
i hope that this help you specially for those who are new to this kind of stuff..
it really work....thx a lot..my phone have the signal back again...
U mean that it supposed to have a weak signall,or no signal at all?
Sent from my Xperia X8 using XDA Premium App
you may try it too. but most of the time after unlocking have no signal at all because of the sim-Lock.
@mhieyato : if unlocking using msm7227_setool2 i put to debugging mode or NOT, if not to put debugging mode that tools can't running or stuck in " getting ROOT rights"...
Please explain step by step master...
mhieyato said:
i know some of you have this problem and worries that something wrong happend during the process of unlocking your phone. well that's the same thing i was thinking about 3 days now and trying to figure it out how to fix this. i just a noobie here and new for all this android thingy but i guess im just lucky fixing it.
by reading again the thread of how to unlock. it mention there that your phone might have a sim lock. this might be the problem so i search some thread related to this and guess what a found the answer!
now here's how to fix it.
1. after unlocking your phone using msm7227_setool2. check if you have network signal so you won't do the step 2 of this thread.
2. now if there's no signal, open again your msm7227 folder (which is the unlock bootloader tool) and you will see there's another tool which is ms7227_semc.
3. put to debugging mode then connect your usb to your PC.
4. run the ms7227_semc and wait till it done.
5. reboot your phone and you already have network signal again.
i hope that this help you specially for those who are new to this kind of stuff..
Click to expand...
Click to collapse
Hey, what if my phone still have no signal ? Could you show me the whole tutorial? I use the ms7227_semc but when its nearly done , the ms7227_semc suddenly shut down. Could you please help me? I want my x8 back :'(
why it doesn't work for me? when running msm phone reboots, and this:
process requires standard 2.x android firmware.
Press any key to continue . . .
Getting ROOT rights.
3487 KB/s (585731 bytes in 0.164s)
Failed to set prot mask (Inappropriate ioctl for device)
Waiting ...
Removing NAND MPU restrictions via SEMC backdoor. Permanent. Require ROOT rights
.
430 KB/s (3087 bytes in 0.007s)
success
Waiting ...
Getting ROOT rights.
Failed to set prot mask (Inappropriate ioctl for device)
Waiting ...
Writing patched semcboot. Two step process
First, we need get access to semcboot area
874 KB/s (8064 bytes in 0.009s)
insmod: can't insert '/data/local/tmp/mapper_2.6.29.ko': invalid module format
Second, we need to write semcboot
3643 KB/s (596916 bytes in 0.160s)
can't find userdate partition
Press any key to continue . . .
jjumphard said:
why it doesn't work for me? when running msm phone reboots, and this:
[...]
Failed to set prot mask (Inappropriate ioctl for device)
[...]
insmod: can't insert '/data/local/tmp/mapper_2.6.29.ko': invalid module format
[...]
Click to expand...
Click to collapse
As a wild guess I'd say you're not on Stock Kernel/ROM but some custom kernel/ROM.
Restore back to Stock Kernel/ROM.
EDIT: Oh wait, you're from the Unlocking Guide ... *should ID nicknames first*
Well, this can now be interesting to see if you can manage to unlock the boot loader again with nAa's Kernel flashed - as there's also no way to go back to Stock Kernel (through Flashtool, PCC, SEUS) while the boot loader is locked. :s
it works!
thanks a lot!
mhieyato said:
i know some of you have this problem and worries that something wrong happend during the process of unlocking your phone. well that's the same thing i was thinking about 3 days now and trying to figure it out how to fix this. i just a noobie here and new for all this android thingy but i guess im just lucky fixing it.
by reading again the thread of how to unlock. it mention there that your phone might have a sim lock. this might be the problem so i search some thread related to this and guess what a found the answer!
now here's how to fix it.
1. after unlocking your phone using msm7227_setool2. check if you have network signal so you won't do the step 2 of this thread.
2. now if there's no signal, open again your msm7227 folder (which is the unlock bootloader tool) and you will see there's another tool which is ms7227_semc.
3. put to debugging mode then connect your usb to your PC.
4. run the ms7227_semc and wait till it done.
5. reboot your phone and you already have network signal again.
i hope that this help you specially for those who are new to this kind of stuff..
Click to expand...
Click to collapse
hi, i have a question about this fix, i unlocked a Xperia X8 (E15a) with octopus suite and then ''no service'' this post work for me? thanks for your help.
yey it worked for me.. after 1 year of giving up on my xperia, i found this post then i thoght why not give it a shot.. then boom it worked.. thanks for the post ^_^
Wow!! Thanks you have saved my phone from "no service" this thingy
yeah it really works!
I was about to put my phone in my garbage, thanks
Hiya guys,
I'm new to the Sony side of things, I'm usually a HTC user but my mother has just got herself an X8 E15i and I am having a few problems with it and was hoping people could help?
firstly, I rooted, UNLOCKED BOOTLOADER, flashed a custom kernel (X8_v08a-cm7_Alfs_djnilse) & GingerZaraki-v05.
Then I had no signal at all, so I thought "ok, flash a newer baseband to attempt fix"
but alas, no joy.
I have then accidently relocked the bootloader :faceplant:
This has now caused her to have no signal... oops... arn't us teenagers great
and then I have read HERE that it is fixable, and I have followed the steps listed but I still can not get signal.
every time I run either script msm7227_semc.cmd OR msm7227_setool2.cmd they both get root, reboot, but still can not get signal.
EDIT: copy of cmd results...
"process requires standard 2.x android firmware.
Press any key to continue . . .
Getting ROOT rights.
adb server is out of date. killing...
* daemon started successfully *
415 KB/s (585731 bytes in 1.378s)
error: protocol fault (no status)
Waiting ...
Removing NAND MPU restrictions via SEMC backdoor. Permanent. Require ROOT rights.
52 KB/s (3087 bytes in 0.057s)
success
Waiting ...
Getting ROOT rights.
Waiting ...
Writing patched semcboot. Two step process
First, we need get access to semcboot area
18 KB/s (8064 bytes in 0.422s)
Second, we need to write semcboot
919 KB/s (596916 bytes in 0.634s)
successfully wrote 0003ff00
Press any key to continue . . ."
its obviously gettting root, but what does 'protocol fault: no status' mean?
and I know that the bootloader is locked because I have used "x8toolbox.final" which I found on here - I would give the maker of it the credit but can not remember who it was.
So at present my mother has a x8 e15i, running 2.1.1 but can't have signal at all??
EDIT1: please help or I think I am in trouble here...
EDIT2: Doesn't matter now guys, after soft-bricking and Hard-bricking (attempted bootloader unlock fail) the X8, I have resurrected it!
and I have successfully rooted (4th time tonight) and now I have flashed GingerDX, which is running great with the GingerDX O/C Kernel
GlennBrownie said:
EDIT2: Doesn't matter now guys, after soft-bricking and Hard-bricking (attempted bootloader unlock fail) the X8, I have resurrected it!
and I have successfully rooted (4th time tonight) and now I have flashed GingerDX, which is running great with the GingerDX O/C Kernel
Click to expand...
Click to collapse
And What you did to resurrect it? I am in the same situation and i can not Find any solution. I used omnius to unlock my simlock...
Sent from my iPhone using Tapatalk
well I have the same problem. after omnius unlock i unlocked the bootloader and no signal. HHHEEEEELLLLLPPPPPPPPPPPPP.
nice guide bro, it really works =D
hello everyone,
i have xperia x8 E15i
I unlocked my phone and after that the signal of the network is weak or inactive.
i think the problem is in a step while unlocking the phone.
i have an idea and i wish you can help fix it.
i didn't personnaly unlock the phone and i don't know the code unlock
tell me is this the same problem as you??
and thanks for sharing your technical experiences
Well for Omnius sim unlock problem you have the answer here: http://forum.xda-developers.com/showthread.php?t=1911915
Did not unlock bootloader but have 3 phones with same issues
In response to what you said, I have 3 Xperia X8's with the same issue but all were unrooted using superoneclick and then loaded gingerdx on them. They worked fine for about 2 months then on all 3 phones (friends) one by one they ended up accidentally putting their sim unlock pin code into the network unlock code thing that pops up on the gingerdx rom and all ended up with no signal at all.. I dont have seTool 2 pro only lite and i cant find any way to get the phone fixed. i live in southern Africa so limited resources etc.. PLEASE HELP
mhieyato said:
i know some of you have this problem and worries that something wrong happend during the process of unlocking your phone. well that's the same thing i was thinking about 3 days now and trying to figure it out how to fix this. i just a noobie here and new for all this android thingy but i guess im just lucky fixing it.
by reading again the thread of how to unlock. it mention there that your phone might have a sim lock. this might be the problem so i search some thread related to this and guess what a found the answer!
now here's how to fix it.
1. after unlocking your phone using msm7227_setool2. check if you have network signal so you won't do the step 2 of this thread.
2. now if there's no signal, open again your msm7227 folder (which is the unlock bootloader tool) and you will see there's another tool which is ms7227_semc.
3. put to debugging mode then connect your usb to your PC.
4. run the ms7227_semc and wait till it done.
5. reboot your phone and you already have network signal again.
i hope that this help you specially for those who are new to this kind of stuff..
Click to expand...
Click to collapse
So i have had my nexus 6 for a little more than a month now and i've messed up up. wish i had this site before. followed a guide on rooting and unlocking the bootloader without really knowing what i was doing. What i didnt know is that i had a defective nexus 6, with the screen the 1?2 of screen freezing glitch. i finally was planning on taking my phone into att warranty center, so i tried to relock the bootloader and was stuck into this boot loop.
I've been trying to follow this guide http://forum.xda-developers.com/nexus-6/general/guide-flash-factory-images-nexus-6shamu-t2954008
but this is getting me nowhere and i desperatly need to reactivate my phone, i can not enter recover mode or anything like that. when i go to the flash-base option i get fastboot not a command
can anyone please help i am so screwed
Means you haven't installed fastboot correctly. Go to question 28 of that thread.
So I messed up with trying to get my phone to global rom without unlocking the bootloader.
A little backstory: I have an 1062 which had an android 8.1, I didn't have my bootloader unlocked.
So I've tried to make my phone Global by using this method https://forum.xda-developers.com/no...-to-convert-nokia-7-china-variant-to-t3769541 . I think it was done successfully and my phone instatly asked me to update to the newer android, so I did it. It was a 1.4 gb update and after it was done I was welcomed by a default android settings screen which asked me to log in to my google account. So I tried and found out that my touch doesn't work at all. I can see the animation that says Welcome and I my phone reacts to Volume up\down and power buttons, but no reaction to my fingers whatsoever. I've tried wiping in the recovery mode, it didn't help.
I can't even find out my imei or get my Rom version.
Is there anything that can help? I'm obviously willing to get my bootloader unlocked if I can get my Imei and rom vers.