Database Develop

[Q] Phone not booting.

Hey guys.
I've been using CM10 M2 for a while now and I decided I should reflash it.
So I made a wipe ( cleared all cache and everything ), installed cm10 m2 and Tantrum's Aroma Gapps installer to install my gapps and other stuff, and rebooted.
Problem is, once I reboot my phone will not boot and it is stuck on a black screen with LED's flashing.
Tried a few times and it the problem persists.
Any word of advice for me?
-Anton
EDIT: Tried flashing latest nightly with tantrums gapps, same problem.
EDIT V2: Flashed same nightly WITHOUT Tantrums gapps ( regular gapps ), everything boots normally. Problem was with Tantrums gapps.

Antonnzr said:
Hey guys.
I've been using CM10 M2 for a while now and I decided I should reflash it.
So I made a wipe ( cleared all cache and everything ), installed cm10 m2 and Tantrum's Aroma Gapps installer to install my gapps and other stuff, and rebooted.
Problem is, once I reboot my phone will not boot and it is stuck on a black screen with LED's flashing.
Tried a few times and it the problem persists.
Any word of advice for me?
-Anton
EDIT: Tried flashing latest nightly with tantrums gapps, same problem.
EDIT V2: Flashed same nightly WITHOUT Tantrums gapps ( regular gapps ), everything boots normally. Problem was with Tantrums gapps.
Click to expand...
Click to collapse
I'm not any pro user, but I think that the CM10 is too heavy for LGOB. I use the CM7.2 and works like a charm.

DFornazari said:
I'm not any pro user, but I think that the CM10 is too heavy for LGOB. I use the CM7.2 and works like a charm.
Click to expand...
Click to collapse
I have used nightly builds of CM10 from October 15 onwards with a problen
only on the 19th release when I couldn't install anything due to an issue with
the version of Clockworkmod Recovery. Once I found out how to downgrade
that version, it's all fine (touch wood).
Sam

@Antonnzr
Rather just use normal GAPPS. There was a release by tantrums that caused bootloop, but he fixed it now.
Use ADB to go back to recovery.
@DFornazari
CM10 isn't heavy at all. rmcc committed a lot of changes from TI's branch and I think it caused some instability with the some of the newer releases. I based that speculation from a comparison between nightlies before the changes was made and after the changes was made. I didn't look at the code so I can't be 100% certain since I don't know what they changed. rmmc is a great dev and should have all the device specif bugs sorted soon.

Yes its all working fine now with cm10 m2 and regualr gapps but I have a new issue.
Whenever I try to download an app from the Play Market ( nova launcher, for example ) it pops up with an error reading:
"Error: 'Nova launcher' could not be downloaded due to an error (927)"
or alternatively:
"Error: 'Nova launcher' could not be downloaded due to an error ( error retrieving information from the server )"
Tried to install apps via online Play Store both on my phone and my laptop but the download never starts. Help?
Disregard that, fixed after reflash.

[Q] TWRP 2.5.0.0 from alroger/humberOS won't let me install gapps

Hi everyone,
I have a Verizon Samsung Tab 7" (p1c). I have gone from CwM 5.0.2.7 to CM 10 vanilla nightly, and was able to go up to HumberOS 20130614 package (his latest). I did this via CwM.
I booted in, and then realized I forgot to flash the gapps for the device. So I booted back in recovery, which was now TWRP. Trying to install the gapps zip failed. In fact, in other attempts at installing HumberOS' ROM, I could get TWRP installed, but then it would never let me install the actual 10.1 ROM.
Any ideas as why this would be? I suppose I can just restart the process (CwM. 5.0.2.7 -> CM 10 vanilla) THEN install the CM 10 gapps package (I have both on the device waiting), then got to 10.1. I assume at that point my apps could be updated within the system itself?

And I think I solved it. I turned off the zip verification checkbox, and both gapps and PDroid patches installed.
Crossing my fingers now, as it boots...

olhado22 said:
And I think I solved it. I turned off the zip verification checkbox, and both gapps and PDroid patches installed.
Crossing my fingers now, as it boots...
Click to expand...
Click to collapse
So far so good!!!

I9000 cyanogenmod nightly help

Hello, I was on the latest stable,
I tried installing the latest nightly - 19 using the cm updater. It said something about data has another partion please try to install again to confirm wiping /data
so i selected the zip again, it seem to install just fine but I cant get past the cyanogenmod logo.
I wiped both cache and installed it again but same problem. Any tips what to do next?

I think you mean Nightly of CM 10.2 ...
Use the newest nightly ,in one Nightly there was an error about installation.
The warning is because with the nightly beginning from 20130816 the partitioning layout have to be changed because of Out of space on /system...so the massage is only that you know it and you have to confirm it a second time ...
So test a newer nightly an it should work!!!
Here is the link to the thread of CM 10.2 ....http://forum.xda-developers.com/showthread.php?t=2385178 there are some additional infos ...
Let me no if it works ...
unrealbe said:
Hello, I was on the latest stable,
I tried installing the latest nightly - 19 using the cm updater. It said something about data has another partion please try to install again to confirm wiping /data
so i selected the zip again, it seem to install just fine but I cant get past the cyanogenmod logo.
I wiped both cache and installed it again but same problem. Any tips what to do next?
Click to expand...
Click to collapse

Please help me .. I wiped the system on my phone

Hello
today before I install CM 12.1 on my XT1072 I clicked on wipe in TWRP then advanced wipe then I selected
* Dalvik cache
* Data
* Cashe
* System
I tried to install CM 12.1 after that but it gave me Error
now I don't have any os installed on my phone
So please if any one know a full rom link or any way to install the os again please help me with it
thank you very much

Hassan Qandil said:
Hello
today before I install CM 12.1 on my XT1072 I clicked on wipe in TWRP then advanced wipe then I selected
* Dalvik cache
* Data
* Cashe
* System
I tried to install CM 12.1 after that but it gave me Error
now I don't have any os installed on my phone
So please if any one know a full rom link or any way to install the os again please help me with it
thank you very much
Click to expand...
Click to collapse
Download from Cyanogenmod site the last nightly of CM for THEA (http://download.cyanogenmod.org/?device=thea)
Put it in the micro SD card of your phone (using another phone or the card reader of your PC if it has one)
In TWRP install the ROM from the external SD (and Gapps if you want to use them)
In this situation I think that the above method is the only one, but wait for other answers, it could be that someone can show you better ways.

when I tried to install CM 12.1 the same way you said .. the phone gave me a failure message

Hassan Qandil said:
when I tried to install CM 12.1 the same way you said .. the phone gave me a failure message
Click to expand...
Click to collapse
Can you report that message?
The first time you install a ROM after a system wipe (as you described), TWRP gives an error message, but, after system reboot (by TWRP function), the phone starts normally and CM starts the standard update procedure

I am not sure what do you mean exactly but the installation of cm 12.1 didn't even start
gave me error message .. I think that cm rom need stock rom to install over it
now I just want to install the official firmware .. but I didn't found any rom img files yet
I thank every one can help me ... it's my only phone :crying:

Hassan Qandil said:
I am not sure what do you mean exactly but the installation of cm 12.1 didn't even start
gave me error message .. I think that cm rom need stock rom to install over it
now I just want to install the official firmware .. but I didn't found any rom img files yet
I thank every one can help me ... it's my only phone :crying:
Click to expand...
Click to collapse
Mmh, it's a strange situation. I wiped system memory about three/four time on my phone (and also on my friend's phone) and the procedure I described to you worked for me every time. But the error message, in my case, was after CM installation and not before, as in your case.
Did you check the MD5Sum (or SHA) of the downloaded file to make sure it was not corrupted? The error you received can be related to a corrupted file...
Lastly take a look at this tool:
http://forum.xda-developers.com/mot...dows-tool-moto-g-2015-xt1072-restore-t3124915
I've never tried it but it seems to be suited to your case.

Problems with TWRP/CyanogenMod 12.1 - Motorola MotoG 2nd Gen XT1068

Hello guys! How are you?
I'm having some bugs with CyanogenMod 12.1 in my MotoG and haven't found nothing that could help me with my problem.
Well, here's the story:
My device had Android KitKat 4.4 as the stock rom and I updated it to Lollipop 5.0 before rooting.
Well, I unlocked the bootloader and used TWRP as a custom recovery and installed SuperSU.
I've been using the phone about almost 8 months after rooting and then, Motorola released an update, I tried to update it via OTA and, of course, it didn't worked since TWRP can't OTA. Nothing changed in my phone, I simply rebooted it and it worked but since a few days some apps started to suddenly close and/or stop.
I decided to install CyanogenMod 12.1, downloaded the latest nightly and a stock package of GApps and flashed them via TWRP.
Wiped Dalvik Cache, Data, Cache and System
At the first attempt, TWRP rebooted after flashing CM12.1 and I wiped the caches via WIPE menu before flashing GApps wich couldn't be installed because there was "no space in storage". Well, I booted my phone normally (running cm12) and downloaded a Micro GApps package and flashed it sucessfully.
Problem is: Clock stops working (it has stopped for now), I can't install some apps from PlayStore such as Facebook, etc and my phone appears to be unrooted.
I think my TWRP is bugged or something cause it does not works as tutorials, etc tells...It shows some errors and sometimes reboots itself after flashing some file.
Do you guys think I should reset everything and then redo all the steps to use CyanogenMod properly? I really liked this custom rom but I'm afraid there will be more bugs in the future....

Anyone?

my solution..
1. (JUST SAYING)You can install ota through fastboot. Use the ota file found in root.( There is a thread for this)
2. Try installing Lucas 2.8.7.0 build. Find it in his thread. Its posted there. It's somewhere in the sea of posts just find it.
3. Then try to clean flash cm 11 build. Then install cm 12.1 build.
4. See if it works.
I don't understand why you face this problem cause well TWRP is very stable.
Well see if it works and get back to me.
Edit :
Saved you some trouble here's the link for TWRP
Link : https://drive.google.com/file/d/0B0WGdtNWubBJVlctNE5PZ1oyQ00/view?pli=1
Its labelled as 2.8.7.0 but its actually 6.0 features of 7.0.

sagar846 said:
1. (JUST SAYING)You can install ota through fastboot. Use the ota file found in root.( There is a thread for this)
2. Try installing Lucas 2.8.7.0 build. Find it in his thread. Its posted there. It's somewhere in the sea of posts just find it.
3. Then try to clean flash cm 11 build. Then install cm 12.1 build.
4. See if it works.
I don't understand why you face this problem cause well TWRP is very stable.
Well see if it works and get back to me.
Edit :
Saved you some trouble here's the link for TWRP
Link : https://drive.google.com/file/d/0B0WGdtNWubBJVlctNE5PZ1oyQ00/view?pli=1
Its labelled as 2.8.7.0 but its actually 6.0 features of 7.0.
Click to expand...
Click to collapse
This is exactly what you should do.
There are several things that don't work as they supposed to do, so follow the steps @sagar846 mentioned.
Sent from somewhere

Oniganon said:
Anyone?
Click to expand...
Click to collapse
cm 12 and 12.1 have some little bugs still but it is useable for daily use