Database Develop

Help newbie with installing new ROM

Hi, I'm stuck with installing new rom, so I hope, that you'll help me.
There are steps what I've done:
- followed THIS topic and ROOT the device with ODIN and CF-Root 4.4 file.
- OKAY, I'm rooted, so let's flash the new ROM
- entered in Clockworkmod Recovery and format EVERYTHING ( /data, /system, /cache, /sdcard etc.... just everything) for clear system
- next I load package with ROM and than INSTALLL
and here is the most important part
- when installed ROM gets something like bootloop but with restart - ROM is loading and after about 40 sec its RESTART
- and the same thing over and over again - restart ->loading->restart.... System never start up correctly to the end
- then when I saw that it does not work, I tried go into the CWM, but there was no CWM (!!!) - it was erased (by installing new ROM maybe???)
- so I must flash (old and stock) ROM via ODIN and again root device with CF-Root (with CWM) - that was only functional rom, what I was able to run, and again did this procedure
I tried this way, perhaps with millions of different ROM and EVERY was stucked (restart) while loading.
I think there are some non-deleted files in device, which should be erased (and which cannot be erased by CWM) for clear start of new installed ROM, what do you think?
Would someone please help me? I don't want old Gingerbread with Kies
Thanks for every responce!

Does it say in the thread that you have to flash a custom kernel?? Give.me the link for the thread so I can make sure that you've done everything right
Sent from ma 5assak

there is a link, but in hypertext THIS, i repost it in full text:
http://forum.xda-developers.com/showthread.php?t=788108
I think, when I've root and CWM, there is no problem and install a new rom will be very least, so not as it seems

Dude this is a kernel not a rom what's the matter with you??:what:
Sent from ma 5assak

please read all my topic - i flash this kernel only for clockworkmod recovery
through CWM I can flash any other rom
through ODIN only stock - cant find any ICS or JB rom which I can flash via ODIN (.tar file)

What variant of i9000 do you have? Are you sure that the rom you are trying to flash is made exactly for your variant?
EDIT: Try Darky ROM, they have an ODIN flashable version called "Resurrection Edition" or something.

I mean give me the link for the Rom you are using not kernel
Sent from ma 5assak

Samsung Galaxy S I9000, i'm sure 100%. NOT I9001, NOT Samsung Galaxy S2. Tried many roms from Development section for I9000, tried from get.cm etc... always the same result bootloop with restart
donhashem.dh said:
I mean give me the link for the Rom you are using not kernel
Sent from ma 5assak
Click to expand...
Click to collapse
OK. For example: this rom cm-9.0.0-galaxysmtd and cm-9-20120815-NIGHTLY-galaxysmtd from http://get.cm/?device=galaxysmtd
Or this one last ([ALPHA][ROM][4.1.1] CyanogenMod 10 for Samsung Galaxy S) http://forum.xda-developers.com/showthread.php?t=1778526 and 20120808 build.
and [ROM][PORT][ANDROID 4.1.1][BETA] TAJB: Jelly Bean port for Galaxy S V7.1 http://forum.xda-developers.com/showthread.php?t=1747042
and this too [4.0.4][ROM] Dark Knight 5.5 [27/4/2012] http://forum.xda-developers.com/showthread.php?t=1510940
and many more....
realy unhappy from this

Nikishek said:
Samsung Galaxy S I9000, i'm sure 100%t
Click to expand...
Click to collapse
I meant I9000 or I9000B or I9000M or I9000T there's a difference between them

I9000 only, checked it several times

Ok so you can flash Darky Rom Resurrection Edition through ODIN with no problem. Its GingerBread if i remember correctly, but it should give you a recovery mode and fully operating phone. From this point you can flash whatever you want.

....And there is one more important thing:
When I have a stock kernel and stock rom from Samsung, cant get into recovery mode - VOLUME UP and POWER non functional. Only when I type: "adb reboot recovery" in terminal.
Just after when I flash a new pre-rooted kernel with CWM, VOLUPE UP and POWER is now functional
k4Z3666: OK, I try and give you an echo I think, when I format everything in CWM, there will be no sign of the earlier system and ALL WILL BE CLEAR

Nikishek said:
I9000 only, checked it several times
Click to expand...
Click to collapse
ok, flashing ICS, may need to be done twice, as first flash may bootloop, IF you want to return to stock to get out of this mess, since you are not sure as to where you are now, due to flashing many roms, use any kit from My Android Collections, link below to get you to a booting ROM, than add a kernel with CWM (use EZbaze package with kernels)

that's helped me too thank you
Sent from my GT-I9000 using xda app-developers app

can't install a CWM recovery mode or Custom rom

hey guys.this is my first thread on XDA. so my problem is,i tried to install an CWM or TWRP recovery kernel on my gt i9070.the sad thing is i cannot install any cwm recovery modes because it says "E: signature verification failed" i had tried all day and no answer for that.at one time i got TWRP recovery mode that can flash via odin.
http://forum.xda-developers.com/showthread.php?t=1873119
so i tried to flash some CWM recovery modes for JB and it doesn't works. when i install other recovery mode using that recovery mode.it says it successfully flashed,but when i tried to restart and go to recovery mode,there is the same kerenel that i used to flash,the flashing was not successful.only working roms are company roms only.they work well when i flash it via odin.also JB rooting kernel can be flash successfully. i dont know why..so..please help me. i don't like this Touchwiz UI..
Thanks and sorry for bad english...

I have answered your question in the other thread here.
That kernel you showed in the link is for 2.3.6 GingerBread not for 4.1.2 JellyBean. Follow the link I gave you in the other post to properly root your JellyBean and installing custom kernel and recovery. Or if you are still on 2.3.6 GB, you use that guide to upgrade to JB.

ROM unable to install

This is my second attempt to install custom ROM and I failed... I did everything step by step and it doesn't work. Or it doesnt boot at all or it craches in recovery mode while installing update.
This time i used some nightly unofficial and it stoped installing in recovery :S This is so annoyng
I downloaded stock lastest from code support for my Samsung S5830 because obviously there is non stable version of custom ROM right now.
I do not advise to go over Android 2.3.6 for S5830 or you will burn down your phone system...

Bugeera said:
This is my second attempt to install custom ROM and I failed... I did everything step by step and it doesn't work. Or it doesnt boot at all or it craches in recovery mode while installing update.
This time i used some nightly unofficial and it stoped installing in recovery :S This is so annoyng
I downloaded stock lastest from code support for my Samsung S5830 because obviously there is non stable version of custom ROM right now.
I do not advise to go over Android 2.3.6 for S5830 or you will burn down your phone system...
Click to expand...
Click to collapse
What did you do exactly?

Viper The Ripper said:
What did you do exactly?
Click to expand...
Click to collapse
Rooted phone with SuperOneClick successfully
downloaded CWM recovery, custom ROM, google apps and newcamera.apk
puted in SD
entered recovery mode, hard reset options (wipe data + catche)
installed zip from SD (CWM recovery)
rebooted recovery
installation of custom ROM stoped with error code (7)
from there i wouldnt be able to boot system
then i used code support and downloaded firmware flash files for S5830
odin installed it but also wont boot up the phone
then i pissed off and took old polish firmware installed with odin, after that did hard reset and now phone is working on 2.3.6

Bugeera said:
Rooted phone with SuperOneClick successfully
downloaded CWM recovery, custom ROM, google apps and newcamera.apk
puted in SD
entered recovery mode, hard reset options (wipe data + catche)
installed zip from SD (CWM recovery)
rebooted recovery
installation of custom ROM stoped with error code (7)
from there i wouldnt be able to boot system
then i used code support and downloaded firmware flash files for S5830
odin installed it but also wont boot up the phone
then i pissed off and took old polish firmware installed with odin, after that did hard reset and now phone is working on 2.3.6
Click to expand...
Click to collapse
Ok now you are unrooted on your new polish right. So now root it with UniversalGingerbreadroot.zip (google it.) Flash an older version of CWM(5.0) through the stock recovery. Finally install a stable custom rom initially do not go for CM roms as for testing try some other stock based rom and if successful you can advance to CWM.
All the best.

Bugeera said:
Rooted phone with SuperOneClick successfully
downloaded CWM recovery, custom ROM, google apps and newcamera.apk
puted in SD
entered recovery mode, hard reset options (wipe data + catche)
installed zip from SD (CWM recovery)
rebooted recovery
installation of custom ROM stoped with error code (7)
from there i wouldnt be able to boot system
then i used code support and downloaded firmware flash files for S5830
odin installed it but also wont boot up the phone
then i pissed off and took old polish firmware installed with odin, after that did hard reset and now phone is working on 2.3.6
Click to expand...
Click to collapse
Here you'll find ROOT and CWM files to get ready your Ace, than you'll be able to install Customs STOCK Roms, CM7.x, CM9.x, CM10.x
Read carefully the threads in GT-S5830 Android Development section and follow the dev's instructions
PS: To get CM11.x you'll need to flash CWM6.x or TWRP

trouble flashing cwm

hey there, i want to install lollipop 5.1.1 on my galaxy note 1 n7000 4.1.2 but when i am trying to flash the cwm from my android system recovery 3e it gives me signature verification failed then i tried to flash the philz touch through odin and did not work. please help me i had been trying for almost 4 hours

Always the same problem. Flash first a PhilZ kernel to get a advanced recovery. Then flash correct kernel for newer Roms like 5.1.x. Normally all written in the Rom thread.

user_99 said:
always the same problem. Flash first a philz kernel to get a advanced recovery. Then flash correct kernel for newer roms like 5.1.x. Normally all written in the rom thread.
Click to expand...
Click to collapse
thxs very much my friend but i want to ask what is better resurrection remix or paranoid

But that was not the question if I read your first post.
Anwser: Best try it out by yourself

Installing Custom Rom on N7000

Hi All,
was trying to install cm11 and cm12 on n7000 bt it failed i had installed philwz custom recovery with that it gave me error
i had bricked my device bt now i have managed to install the stock rom
my device is rooted need help in installing cwm recovery so that i can install cm11 or cm12 or any other rom
how do i install cwm tried many ways.. need flash files to install it with odin
also i searched in forums bt am confused regarding kernal and all
Please need assistance
Thank u very much.

I think you're in the wrong section. anyway,
1. if you're still on stock recovery, try install Philz kernel(search in the forum) for your stock ROM, Install it using update function in the stock recovery.
2. reboot to recovery again, you'll have philz recovery (but it's outdated for flashing android KK and above ROM, but you have to install it first since it pass the stock recovery verification) then flash kernel that compatible with android KK n android L.
3. then reboot to recovery again, and finally install your cm11 or 12 ROM and the following Gapps they provide

I Tried that bt still not able to find the correct version for my mobile if you guide me for the proper link/ direct link i can provide all the information required
thanks

You can find it following this:
3.flash PhilZ-cwm6-XXLT6-XSA-5.06.1.tar.md5 (http://d-h.st/OTu) to get cwm recovery by using odin or mobile odin (To download click the blue Download now button)

hemanthemant300 said:
Hi All,
was trying to install cm11 and cm12 on n7000 bt it failed i had installed philwz custom recovery with that it gave me error
i had bricked my device bt now i have managed to install the stock rom
my device is rooted need help in installing cwm recovery so that i can install cm11 or cm12 or any other rom
how do i install cwm tried many ways.. need flash files to install it with odin
also i searched in forums bt am confused regarding kernal and all
Please need assistance
Thank u very much.
Click to expand...
Click to collapse
Here you can find "How to install" " The steps to install it from an stock samsung rom are:"
http://forum.xda-developers.com/galaxy-note/development/rom-t2938649
If you follow exactly the steps 1-7 you can install your desired rom in step 8

Hey thank u so much for the solution it worked now i am on cm11.. if u all suggest what is the best rom at present...?

Please I've tried d download link bt ain't working. Can someone help me out? Thanks in advance