T-Mobile Galaxy 3 N900T
No OS. TWRP was installed and I thought I had ROM on SD card no. So now I have no OS. I tried the Volume up home on button but just says Galaxy Note 3 and that's yet.
I read some other posts but where do I get recovery image and how do I get to bootloader? via Odin?
How do I recover?
If you can get into recovery, just download and flash a rom.
Also this is the at&t forum, you need to be in the t mobile one if you want a recovery image.
Related
Hey.
I've tried to flash CWM onto a Samsung Galaxy Mini S5570, but even though everything in ODIN seems to go smoothly, I cannot access the recovery menu. Whenever booting with the home key down, It just gets stuck forever at SAMSUNG logo.
I've tried flashing different versions of CWM, all with same results.
Has anyone here had a similar problem and maybe know what could be causing it?
Thank you.
here
I think you will need step step clear procedure
Go to this linkand find your solution from thelinks column on the right side,
you can ask your queries to the sites author too.
Don't forget to click the thanks button.you can follow the site for further doubts on galaxy mini.
Easiest way to flash cwm on your phone: download latest cwm by squadzone.. place it on the root of your sdcard, not inside any folder.. boot to stock recovery.. apply update from sdcard, you should be able to see the cwm zip, choose it and confirm install.. you will have cwm once you boot again to recovery..
Sent from my GT-S5570
I just flashed my mini with one package CWM installer using odin, and everything is good..when you flash with odin, what method do you use?
Hi there,
I have a Samsung Galaxy Tab 10.1 WiFi/3G (first edition). Right now there is stock ROM on it. I flashed CWM on it, booted in recovery mode and followed some guide I found.
At first I had an older version of CWM (5), after some playing around I installed CWM version 6. I wanted to flash the CM10 ROM, but version 5 of CWM gave me some error, So I flashed a newer version.Followed the guide again, installed ROM from ZIP file with CWM, no errors, flashing is done, reboot Tab, and now the only thing I see is the "Samsung Galaxy Tab 10.1" logo/boot screen.
When I restore the backup I created earlier, the tablet boots in the stock ROM again...
So I was wondering what is going wrong... I have read some thread but could not find anything similar to this...
Thanks!
Hi,
You are on the wrong forum, but I guess that you will need to re- stock your device using Odin or hemindall.
Regards
Sent from my GT-P1000
Hi guys. I was hoping that maybe some of you genius's maybe be able to help me out? I will try and explain my problem as clearly as possible.
I have an I9305 and an from the UK. I have rooted my phone before and used many custom roms. But quite recently I decide to unroot my phone and go back to a normal stock rom. Last week I got the urge
to root again and install some custom roms. I quickly discovered that since I had OTA my phone that the latest OS has problems (knox) with rooting. I did manage to root my phone. However, the problem started when I tried to install
twrp through Goomanager. I tried to reboot into recovery mode and my phone was stuck on the Galaxy S III splash start screen, and I could not get into recovery mode either. I could still get into download mode. Eventually I did manage
to restore my phone using odin, and install a stock rom for Ireland. After this I tried to install a stock from for the UK, and now my phone is now back to being stuck on the splash screen, and I can not enter recover mode on my phone
using the up/home/power combo, but I can still acces download mode and conect to odin. I have been searching on line for several days for some solutions and fixes, but I seem to be getting no where. So please, if you can help my out and hopefully get my phone back to life I would
be extremely grateful.
If you can boot to download mode, then have you tried to flash a custom recovery with odin? If its twrp you want then flash the twrp tar for i9305 which you can get off the team win website and then see if you can access recovery. If you can, then you should be able to flash a samsung 4.3 rom or cm rom from external sd if you don't have one on your internal or even restore a backup if you have one.
AllianceROM I9305
Thanks for your reply. Yes, I have tried to flash cwm and twrp using odin. They seem to flash fine, but I can not enter recover mode at all. I have also tried to flash some custom roms and they also seem to flash fine, with no errors, but my phone is still stuck on the boot logo. Thanks for any more help.
daytimeKnight said:
Thanks for your reply. Yes, I have tried to flash cwm and twrp using odin. They seem to flash fine, but I can not enter recover mode at all. I have also tried to flash some custom roms and they also seem to flash fine, with no errors, but my phone is still stuck on the boot logo. Thanks for any more help.
Click to expand...
Click to collapse
im afraid like me, your stuck on 4.3... download the offical rom and odin it across to your phone, you will not be able to root your phone from now on, your stuck stuck with stock 4.3.. you cant even enter recovery mode thanks to knox.. just the download mode.. like i said in my post "UP YOURS SAMSUNG" IF I EVER SEE YOU IN THE STREET ILL KNOX YOU OUT LOL
relating btuali
Thanks for you replies and help so far. It would be good if I could flash 4.3 through odin, but unfortunately after each successful flash, my phone remains on the sIII logo screen. Maybe there is a specific rom that you guys could recommend that I try? Thanks once again.
Hi there. A big thanks for taking the time to help and give advice. I now finaly have my phone working again. I used Odin 3.7 and the latest official rom, entitled "I9305XXUENA1_I9305SIOENA1_SIO.zip" Odin froze and stalled a few times trying to install but after a few tries it worked. I can now also get back into recovery mode now. So, I was wondering might it be a good idea to do the normal wipes in recovery mode. ie wipe cache, etc. Thanks once again.
Yes keep it clean...
Raistlin1158 said:
Yes keep it clean...
Click to expand...
Click to collapse
Will do.:good:
Hey all so I'm in need of some desperate help!!!
I was trying to install Walter White's rooted lollipop on my phone via Safe strap. I rebooted into Safestrap recovery then activated Rom Slot 1 because if anything happened like it did right now i wanted be able to back to stock rom slot.
After installin the rom in the rom slot 1, i've been stuck on a screen with "Samsung GALAXY Note 3" for an hour now. I don't even see the lock that i used to see at the bottom. or the splash screen that used to come up when i booted my phone regularly before. And im not sure what to do!!!
Please help!
unheartedninja said:
Hey all so I'm in need of some desperate help!!!
I was trying to install Walter White's rooted lollipop on my phone via Safe strap. I rebooted into Safestrap recovery then activated Rom Slot 1 because if anything happened like it did right now i wanted be able to back to stock rom slot.
After installin the rom in the rom slot 1, i've been stuck on a screen with "Samsung GALAXY Note 3" for an hour now. I don't even see the lock that i used to see at the bottom. or the splash screen that used to come up when i booted my phone regularly before. And im not sure what to do!!!
Please help!
Click to expand...
Click to collapse
im having the same issue
If you're lucky you can flash this with Odin https://www.androidfilehost.com/?fid=96042739161891885 in the AP slot. It should get you back to Safestrap, so you can delete Rom Slot 1 and install the Rom on Stock Rom slot ONLY. Not trying to be mean, but if Rom Slot 1 not saving you what's the point of using it? IF flashing the NC2 Kernel does not work, you going to have to start over and Odin flash ALL four files (NOT THE All-In-One) http://forum.xda-developers.com/showpost.php?p=54803130&postcount=136 Odin http://forum.xda-developers.com/attachment.php?attachmentid=3109599&d=1420980613 @unheartedninja @banishedmonk
So I have an S3 Mini i8200N. I flashed it with philz recovery after rooting with vroot, then flashed a deodixed rom somewhere on here. I have the same rom on my memory card but when I flash it I'm still stuck in the recovery. I can't boot it to enable usb debugging, and the computer (Windows 10) doesn't seem to be able to detect it. Is there any way to fix it or is it totally bricked? Was about to flash it back to stock for my cousin to have it. If it is a brick i'll just replace the screen on hers with the one from this so no biggie either way. Thanks
Is it working now that you flashed stock? If so try using twrp instead & a different custom rom