I have an AT&T galaxy note3 of N900AUCUBMI9 with network lock, and I want rewrite a ROM of N900ZSUBMI5 into it with Odin 3.09 which's a Chinese version.When downloading the pit file, Odin noticed "Re-Partition operation failed":
<ID:0/015> Odin v.3 engine (ID:15)..
<ID:0/015> File analysis..
<ID:0/015> SetupConnection..
<ID:0/015> Initialzation..
<ID:0/015> Set PIT file..
<ID:0/015> DO NOT TURN OFF TARGET!!
<ID:0/015> FAIL!
<ID:0/015>
<ID:0/015> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
At same time, there's a message on the phone said "secure check fail: PIT"
How could I resolve this problem, or how could I download the N900ZSUBMI5 rom into my phone?
odin wont work on att note 3, because of the bootloader locked. So use the safestrap install a international rom. go to android development for more detail.
Related
Hello sirs, I have a galaxy s with user code. on the other hand my device is unable to go to downloading mode(three keys problem). can anyone help me to solve this problem?
Thanks
Its on the front page .
http://forum.xda-developers.com/showthread.php?t=819551
jje
Thanks sir, But when I try to flash with odin, I alwayes encounter with
this error:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> zImage
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I tried with 4 different roms and odins. But same results appeared. only this file Voodoo-stable-5.5-Froyo-GT-I9000-odin-pda can flashed on phone and phone again turned on with user lock. can you help me please?
If your Galaxy is locked with a user code then you need to visit a service centre and provide proof of ownership.
jje
Hello i have a Galaxy S5 G900A running 5.0 lollipop. But after flashing xposed.zip through flashfire my phone shows AT&t logo for a while and then power off. I try to flash through odin but each Time get these error. I have tried Downgrade-to-NEC, Stock 4.4.2 firmware but it not flashing it just giving me these errors
Odin logs
<ID:0/020> Added!!
<ID:0/020> Odin engine v(ID:3.1100)..
<ID:0/020> File analysis..
<ID:0/020> SetupConnection..
<ID:0/020> Initialzation..
<ID:0/020> Set PIT file..
<ID:0/020> DO NOT TURN OFF TARGET!!
<ID:0/020> Get PIT for mapping..
<ID:0/020> Firmware update start..
<ID:0/020> SingleDownload.
<ID:0/020> boot.img
<ID:0/020> NAND Write Start!!
<ID:0/020> recovery.img
<ID:0/020> system.img.ext4
<ID:0/020> FAIL! (Auth)
<ID:0/020>
<ID:0/020> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
On phone
SW-Rev Check fail: Refer 3 > Binary 1
Secure check fail: System
I am facing this problem for more than a week so kindly give me the solution for this.
It won't goto stock again because of the security check try flashing a stock rooted rom and and oa1 bootloader then kernal
Sent from my SM-G900F using XDA-Developers mobile app
Hello friends,
I've noticed that a lot of the PE3 ROMS are all TouchWiz based. Because of this i'd like to revert back to DOK2 and install resurrection remix or even CM 12.1. However, when flashing the BL and CP DOK2 to my device via odin I get the error below. My device is a SM-910T Note 4 T-Mobile.
<ID:0/015> Added!!
<ID:0/015> Odin engine v(ID:3.1101)..
<ID:0/015> File analysis..
<ID:0/015> SetupConnection..
<ID:0/015> Initialzation..
<ID:0/015> Get PIT for mapping..
<ID:0/015> Firmware update start..
<ID:0/015> SingleDownload.
<ID:0/015> aboot.mbn
<ID:0/015> NAND Write Start!!
<ID:0/015> NON-HLOS.bin
<ID:0/015> FAIL! (Auth)
<ID:0/015>
<ID:0/015> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/015> Removed!!
Thanks!
(I'm new to this forum so let me know if I'm missing something in my post, or I am posting in the wrong place)
I have been unable to find the appropriate firmware for my device so that I can flash it and get rid of Factory Binary.
I have tried 3 zip downloads for Odin with BL+AP+CP+CSC+USERDATA
and one combination file
None of them have worked because they aren't the exact version I need and I keep getting an error;
On the phone:
SW REV CHECK FAIL : [abl]Fused 6 > Binary 5
and in Odin;
<ID:0/008> Odin engine v(ID:3.1303)..
<ID:0/008> File analysis..
<ID:0/008> Total Binary size: 7048 M
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Set PIT file..
<ID:0/008> DO NOT TURN OFF TARGET!!
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> NAND Write Start!!
<ID:0/008> SingleDownload.
<ID:0/008> abl.elf
<ID:0/008> FAIL! (Auth)
<ID:0/008>
<ID:0/008> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
If anyone can find the firmware specific to the model; FA71_N950USQU6ASG1_13942288
I would be greatly appreciative.
ahhhh6980 said:
(I'm new to this forum so let me know if I'm missing something in my post, or I am posting in the wrong place)
I have been unable to find the appropriate firmware for my device so that I can flash it and get rid of Factory Binary.
I have tried 3 zip downloads for Odin with BL+AP+CP+CSC+USERDATA
and one combination file
None of them have worked because they aren't the exact version I need and I keep getting an error;
On the phone:
SW REV CHECK FAIL : [abl]Fused 6 > Binary 5
and in Odin;
<ID:0/008> Odin engine v(ID:3.1303)..
<ID:0/008> File analysis..
<ID:0/008> Total Binary size: 7048 M
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Set PIT file..
<ID:0/008> DO NOT TURN OFF TARGET!!
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> NAND Write Start!!
<ID:0/008> SingleDownload.
<ID:0/008> abl.elf
<ID:0/008> FAIL! (Auth)
<ID:0/008>
<ID:0/008> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
If anyone can find the firmware specific to the model; FA71_N950USQU6ASG1_13942288
I would be greatly appreciative.
Click to expand...
Click to collapse
Since you are on N950USQU"6"ASG1 firmware you can only flash firmwares with equal or higher bootloader versions. The number 6 in Quotes is your bootloader version, so you can flash any firmwares with N950USQU"6 or 7 or 8 or up".....
For eg:
N950USQU"6"ASG1 (bootloader ver 6)
N950USQU"7"ASK1 (bootloader ver 7)
N950USQU"8"ASJ1 (bootloader ver 8)
etc....
You can NOT downgrade your bootloader to ver 5 or lower! Bootloader won't allow it! Which you found out by flashing N950USQU"5"... firmware on your N950USQU"6"ASG1 firmware.
edit:
Look on www.sammobile.com in firmware section for SM-N950U and choose your cell provider (eg. T-MOBILE TMB, AT&T, VERIZON, ETC).
If too slow you can run samfirm.exe on pc to download the firmware that you found info on SAMMOBILE.COM .
When I try to flash my phone I get errors like
1.
<ID:0/010> Odin engine v(ID:3.1401)..
<ID:0/010> File analysis..
<ID:0/010> Total Binary size: 4659 M
<ID:0/010> SetupConnection..
<ID:0/010> Can't open the serial(COM) port.
<OSM> All threads completed. (succeed 0 / failed 1)
2.
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Set PIT file..
<ID:0/008> DO NOT TURN OFF TARGET!!
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> sboot.bin.lz4
<ID:0/008> NAND Write Start!!
3.
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
4.
<ID:0/007> Odin engine v(ID:3.1401)..
<ID:0/007> File analysis..
<ID:0/007> Total Binary size: 4661 M
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Set PIT file..
<ID:0/007> DO NOT TURN OFF TARGET!!
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> NAND Write Start!!
<ID:0/007> SingleDownload.
<ID:0/007> sboot.bin
<ID:0/007> param.bin
<ID:0/007> FAIL!
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
How to fix it
UPD: i fixed it https://samfw.com/firmware/SM-A600FN/SEK/A600FNXXU9CVE1
And the same error occurs with other firmware versions? Any error shows on phone screen? And what are you trying to flash?
nqnxev said:
And the same error occurs with other firmware versions? Any error shows on phone screen? And what are you trying to flash?
Click to expand...
Click to collapse
1.Yes
2.No
3.I am trying to flash official android 8 firmware (downgrade)
blvxrd said:
3.I am trying to flash official android 8 firmware (downgrade)
Click to expand...
Click to collapse
Here's the problem. It's impossible to downgrade to firmware with lower bootloader version. However, it is possible if you unlock your bootloader, flash custom recovery and then flash your Oreo through TWRP/OrangeFox.
nqnxev said:
Here's the problem. It's impossible to downgrade to firmware with lower bootloader version. However, it is possible if you unlock your bootloader, flash custom recovery and then flash your Oreo through TWRP/OrangeFox.
Click to expand...
Click to collapse
thanks, i have already repaired it