Database Develop

[Q] camera fail

Hello, i have a problem with my galaxy gt i9000. i start the camera, couple sec. later it just crashes, it says "unfortunately, gallery has stopped." before that i was using android 2.3.3 then it said camera failed. but then i flashed jelly bean 4.1.1 and still crashes, do anyone knows what might help to get it working again?

mihkelramjalg said:
Hello, i have a problem with my galaxy gt i9000. i start the camera, couple sec. later it just crashes, it says "unfortunately, gallery has stopped." before that i was using android 2.3.3 then it said camera failed. but then i flashed jelly bean 4.1.1 and still crashes, do anyone knows what might help to get it working again?
Click to expand...
Click to collapse
go into the settings, app, all, gallery -----> clear cache and delete data
for safety still in recovery mode, wipe cache and dalvik.
then it should go back.

djceet said:
go into the settings, app, all, gallery -----> clear cache and delete data
for safety still in recovery mode, wipe cache and dalvik.
then it should go back.
Click to expand...
Click to collapse
Still nothing
says unfortunately gallery has stopped (

mihkelramjalg said:
Still nothing
says unfortunately gallery has stopped (
Click to expand...
Click to collapse
ok......hmmmm....
download this -----> http://goo.im/gapps/gapps-jb-20121011-signed.zip
go to recovery mode and wipe cache and dalvik.after that flash that zip.
this could help you. if not it would be better to re-install the rom after you have installed the stock rom + root kernel.

revert it to stock, re-root it, then install whatever ROM, then see, it solved it when i had that problem :fingers-crossed:

mihkelramjalg said:
Hello, i have a problem with my galaxy gt i9000. i start the camera, couple sec. later it just crashes, it says "unfortunately, gallery has stopped." before that i was using android 2.3.3 then it said camera failed. but then i flashed jelly bean 4.1.1 and still crashes, do anyone knows what might help to get it working again?
Click to expand...
Click to collapse
I see one or two possible causes of your problem:
1. Kernel more than 391MB usually breaks the 720p video and Gallery, make sure the bigmem patch of kernel is not activated.
2. Flashing directly from GB to JB usually causes post-installation problems, one of which maybe is your problem. Developers recommend a gradual ugrade of Android system to avoid any problems. From GB flash a CM9 ICS first then finally the JB Rom you wanted. In this way, you will surely get a trouble-free Rom.

smiley118118 said:
revert it to stock, re-root it, then install whatever ROM, then see, it solved it when i had that problem :fingers-crossed:
Click to expand...
Click to collapse
i dont remember the stock android and other sh*t can u tell me or post a link were i can get everything what i need to revert it stock ? tnx.

You can also try to fix permissions in CWM under "advanced".

prob.
i reverted my galaxy s gt i9000 to stock, and hoped to get camera working again but no. has still that problem, says camera failed or something like that.
well i seen some posts about copyng camera firmware, i tried that. but next problem was... that this copy failed. idk why, maybe i cant in stock ?
pls someone help me!

I think I have exactly the same problem.
It was caused by flashing Onecosmics ICSSGS RC 4.2 to CM10 Stable. (i have to admid the camera was semi broken at ICSSGS already, crashed somewhere in an hour after booting, had to reboot phone to get it running again, but well it was working...)
Camera has never worked since. (stock sammy gave me a black screen when opening the camera, making a picture just made it freeze. CM10 just gives gallery crashes upon opening. Tried nandroids, cleared cashes, tried stock sammy firmwares. I wanted to do a Samsung Kies repair, but i was unable to find stock firmware for my country...
Flashing the camera firmware might work. It didn't for me, but i have heard it could be the solution.
Can you see if you front camera is working (install instagram and make a front camera pic, will evade the gallery has crashed problem).

yea, my front camera works, i can take pictures and watch them later.
but my back camera doesnt work

maurico0o said:
I think I have exactly the same problem.
It was caused by flashing Onecosmics ICSSGS RC 4.2 to CM10 Stable. (i have to admid the camera was semi broken at ICSSGS already, crashed somewhere in an hour after booting, had to reboot phone to get it running again, but well it was working...)
Camera has never worked since. (stock sammy gave me a black screen when opening the camera, making a picture just made it freeze. CM10 just gives gallery crashes upon opening. Tried nandroids, cleared cashes, tried stock sammy firmwares. I wanted to do a Samsung Kies repair, but i was unable to find stock firmware for my country...
Flashing the camera firmware might work. It didn't for me, but i have heard it could be the solution.
Can you see if you front camera is working (install instagram and make a front camera pic, will evade the gallery has crashed problem).
Click to expand...
Click to collapse
yea, my front camera works, i can take pictures and watch them later.
but my back camera doesnt work

strange problem

Batistuta1 said:
strange problem
Click to expand...
Click to collapse
yes

still nothing
for now i tried to copy another galaxy s i9000 camera firmware and samsung wawe cam. firmware, but still that same problem... well 1 thing changed.
my galaxy s gt i9000 front camera is messing right now, i got like 6-7 me on that camera some lines are on the screen in camera :/
Well, if someone knows something what could help then please tell me!
ive tryed another roms, i been using android 2.3.6 and 4.1.1, back on stock, copyng files and messing around with that.
maybe camera is broken? i dont know what to do...

Have the same problem for a long long time.
been flashing a lotta roms kernels etc.. nothing.
I even changed the camera (I had another GT-i9000) and nothing, which makes me believe it's something of the Motherboard
Also, if I press the screen at the top half of it.. it shuts down.

I've had no back camera for a long time either. I've flashed back to eclair, tried about 4 different cam firmwares which all flashed successfully so they said, and lots of ROMs. I gave up. Im sure it must be hardware.
Seen people posting over time about the same thing. Firmwares helped a couple of people, but lots of people ended up with a dead camera. Buying a new camera unit from eBay fixes it. I think they're about £20....
Sent from my GT-I9000 using Tapatalk 2

I have exactly the same problem. Tried everything from changing many roms and kernels. Even bricked my phone for two weeks and then resurrected it using Darky's Rom Resurrection. But the camera even crashed in Darky's rom and it is still not working when I'm back to SlimRom 4.2.2 build 6. It was working all file and I cannot believe that it is a hardware issue. Please help.
YRS

same problem on my i9000. I will try with another camera from a friend's i9000.... if nothing happens probably will leave my precious

HOWTO: flash custom GB and JB roms for 9070P (NFC)

HOW TO PREPARE i9070 CUSTOM ROMS TO WORK ON 9070P​
disclaimer as usual - everything on your own responsibility still, seems to be quite safe, the worst ever happened is no gsm signal if using not appropriate /lib/tee folder files. no soft/hardbricks reported (yet )
technical details - scroll a bit down
----
part 1: /system/lib/tee folder to replace
Jelly Bean Stock ROMS and ones based on Samsung Stock ROMs (Harshjelly, PureVanilla, LightJB..)​the most important information: in order to get i9070P Jelly Bean modded stock ROMs working, you have to:
1. download this file: http://d-h.st/vUw
2. save the file on your sd card (preferably external sd, not the internal memory)
3. flash your desired rom, do all neccessary wipes and so on, but DON'T REBOOT YET!
4. you have to install the zip downloaded in step 1 (don't confuse the order of steps 3 and 4, otherwise your rom won't work for 9070P, ie. you won't have any radio modules working - gsm, wifi, bt)
5. reboot and enjoy
tested by users on various modded stock roms (read all the pages); the one above works on stock-based ROMs only,
----
CyanogenMod ROMs
for CM10, CM10.1 and CM10.2 file here: http://d-h.st/E9e
proceed exactly as steps described above
thx Mr.xD97 - files for /system/lib/tee extracted from his rom here http://forum.xda-developers.com/showthread.php?t=2278169
according to hannez_r
Tee folder from JB 4.1.2 TW works on CM11.
Click to expand...
Click to collapse
- thx for the info
-------------------------​
part 2: the build.prop incompatibility:​this happens if you attempt to flash custom roms straight from your 9070P stock ROM. once you successfully flash any i9070 ROM, you won't be bothered with the issue (until you reflash your stock ROM with odin again)
in case flashing of your target rom ends immediately with an error ("assert failed: getprop....") then you have to do something with your build.prop. The explanation for that happening is: there are build.prop entries stating that the phone is "9070P" and the updater-script prevents your target ROM from being flashed to an uncompatible device (not an "9070")
possible solutions:​either: 1. grab some build.prop editors prior to flashing anything and change all occurences of "9070P" to "9070" and "janicep" to "janice". like this one: https://play.google.com/store/apps/details?id=com.jrummy.apps.build.prop.editor or just edit your build.prop manually.
or: 2. unzip the target ROM .zip file, go to \META-INF\com\google\android and erase the lines starting with "getprop" (do NOT use windows notepad - it breaks the file, use notepad++ instead), save the edited updater-script and push it to the sd card. you're ready to flash the ROM
3. [automatically, to be tested] - waiting for your reports. ; use the build.prop.to.9070.zip to spoof your build.prop to i9070 model; it's a CWM flashable that should change the contents of your build.prop automatically. all credits for the script go to the author of this post: http://forum.xda-developers.com/showpost.php?p=19093919&postcount=20 - remember, not tested yet, in case you still get an assert:getprop error after flashing this .zip, try rebooting recovery and install the ROM .zip then method 3 most probably not working, so don't test unless you have lots of spare time to play with your phone
--------
source and inspiration:
I found that in galaxy ace 2 i8160/L/P forum - you have to replace /system/lib/tee folder (or 3 files inside) in order to flash custom roms made for i9070: there it is: http://forum.xda-developers.com/showthread.php?t=2159250

BUMP.
situation changed a lot. i9070P owners - try solution above
---
no more time today
btw. forgot to tell - take Gingerbread version of suppressed, no one knows what happens when you try with JellyBean version!

Woooow thank you
Gesendet von meinem GT-I9070P mit Tapatalk 2

If I understand properly, I should be able to download JetMod ROM. Replace the three files in the ZIP “tee” directory, “cops_ta.ssw, custom_ta.ssw, smcl_ta_8500bx_secure.ssw”, with the same named files currently in my phone, go to TWRP, Wipe System, Wipe Cache, Wipe Dalvik Cache, Factory reset, then install JetMOD zip?
Does this seem correct?

purplepizza said:
If I understand properly, I should be able to download JetMod ROM. Replace the three files in the ZIP “tee” directory, “cops_ta.ssw, custom_ta.ssw, smcl_ta_8500bx_secure.ssw”, with the same named files currently in my phone, go to TWRP, Wipe System, Wipe Cache, Wipe Dalvik Cache, Factory reset, then install JetMOD zip?
Does this seem correct?
Click to expand...
Click to collapse
yes, exactly. that way works for suppressed amoled/megatheme and for custom roms for ace 2 (ofc for ace 2 they use their /tee files respectively). so no reason it shouldn't work for jetmod.
---------
BTW curious to ask if anybody dared to flash any custom JB rom over recovery to 9070P? guinea pigs needed

You are awesome! Jetmod works great! Thank you!

thanks!!
Oh thank you very very much! I have one question... Now it is not possible try to flash a Jelly Bean rom for 9070 ok.. But in future owners of 9070P will get Jelly Bean probably this method will work also for Jelly bean custom roms for 9070?

FollonSaxBass said:
Oh thank you very very much! I have one question... Now it is not possible try to flash a Jelly Bean rom for 9070 ok.. But in future owners of 9070P will get Jelly Bean probably this method will work also for Jelly bean custom roms for 9070?
Click to expand...
Click to collapse
most probably - yes.
------
btw. I tried to run NFC on suppressed, but no go - deodexed NFC.apk, NFCTestmode.apk and Tag.apk, pushed to /system/app and set permissions, but still no way to run NFC. in case You people have any ideas, let me know fortunately not a dealbreaker to me.

adamuadamu said:
most probably - yes.
------
btw. I tried to run NFC on suppressed, but no go - deodexed NFC.apk, NFCTestmode.apk and Tag.apk, pushed to /system/app and set permissions, but still no way to run NFC. in case You people have any ideas, let me know fortunately not a dealbreaker to me.
Click to expand...
Click to collapse
If you have a native i9070p ROM... search the system folder for any file that contains nfc in the name, and copy it from the native i9070p ROM to suppressed. P.S. use windows search function

Another question: after flashing a custom rom for 9070 on 9070P is flashed also the kernel for 9070... Can we use kernel of the rom or we should change te kernel with CoCore-P? Thank you for the reply

FollonSaxBass said:
Another question: after flashing a custom rom for 9070 on 9070P is flashed also the kernel for 9070... Can we use kernel of the rom or we should change te kernel with CoCore-P? Thank you for the reply
Click to expand...
Click to collapse
as long as the kernel you currently use works OK - no need to worry; but check your CPU usage as some users reported excessive CPU usage all the time for older cocore kernels. I can confirm that cocore 4.1(for non-NFC version) and cocore-P don't have that issue
--
still no luck with NFC - the files I used are the only ones that can have anything in common with nfc. it gets even worse upon reboot as the NFC service app pops up FC window every three seconds and doesn't stop until I deleted it and rebooted again :|

adamuadamu said:
as long as the kernel you currently use works OK - no need to worry; but check your CPU usage as some users reported excessive CPU usage all the time for older cocore kernels. I can confirm that cocore 4.1(for non-NFC version) and cocore-P don't have that issue
--
still no luck with NFC - the files I used are the only ones that can have anything in common with nfc. it gets even worse upon reboot as the NFC service app pops up FC window every three seconds and doesn't stop until I deleted it and rebooted again :|
Click to expand...
Click to collapse
Are you sure you included all the libs ?
You also need to include all the NFC system apps as well
My life has more downs than ups, but I try to keep it a balance.

CallMeVentus said:
Are you sure you included all the libs ?
Click to expand...
Click to collapse
thanks for the suggestion. forgot to compare the differences in libs between 9070 and 9070P roms. will look into it

I have never flashed a new ROM. I want to try JetMod. It seems more I search, more restoring options are presented. (TWRP Restore or TB) Can someone recommend the safest and easiest method for restoring user apps and settings (SMS, MMS, & Contacts) on the new ROM? I have a TB and TWRP back up.

purplepizza said:
I have never flashed a new ROM. I want to try JetMod. It seems more I search, more restoring options are presented. (TWRP Restore or TB) Can someone recommend the safest and easiest method for restoring user apps and settings (SMS, MMS, & Contacts) on the new ROM? I have a TB and TWRP back up.
Click to expand...
Click to collapse
For Contacts I use the in-built backup feature....and SMS and MMS I usually use MyBackup Root for stock Messaging , otherwise when I'm using GO SMS Pro I use its in-built backup feature
My life has more downs than ups, but I try to keep it a balance.

Karsten95 said:
You are awesome! Jetmod works great! Thank you!
Click to expand...
Click to collapse
I must admit I tried Jetmod without success. Does not boot. Just startup screen being displayed.
I tried with default kernel and with cocore-P 1.0 kernel. Nothing worked. Might be something wrong with the installation (using TWRP in cocore-P 1.0). Installing system files seems to take just a fraction of second. And I suspect nothing was actually copied. I also tried replacing Aroma updater with the "regular one". Still the same...
Suppressed 2.2+2.5 worked. But it is not really my taste Should have tried 3.0 instead. But I would really like to try Jetmod. Any hints about the recovery?
Does CWM recovery for i9070 (non-P) http://forum.xda-developers.com/showthread.php?t=1987313 work for P devices? Anyone tried?

LaizyJumper said:
I must admit I tried Jetmod without success. Does not boot. Just startup screen being displayed.
I tried with default kernel and with cocore-P 1.0 kernel. Nothing worked. Might be something wrong with the installation (using TWRP in cocore-P 1.0). Installing system files seems to take just a fraction of second. And I suspect nothing was actually copied. I also tried replacing Aroma updater with the "regular one". Still the same...
Suppressed 2.2+2.5 worked. But it is not really my taste Should have tried 3.0 instead. But I would really like to try Jetmod. Any hints about the recovery?
Does CWM recovery for i9070 (non-P) http://forum.xda-developers.com/showthread.php?t=1987313 work for P devices? Anyone tried?
Click to expand...
Click to collapse
well, probably someone that's using jetmod on 9070P will tell you how to do it. but to be sure: did you start with 3.0, run the android wizard->rebooted to recovery->installed->3.1->rebooted to system->rebooted to recovery->installed 3.2 ? AFAIR when I was using i9070(non-P) I had to proceed these steps as flashing 3.0 + upgrades without reboots in the meantime caused bootloop or similar
as far as CWM is concerned - 1. it's temporary 2. it's meant for JB roms 3. never tried it on 9070P due to the fact TWRP always worked for me

Thank you very much adamuadamu... It worked very well for me... I installed jetmod 3.0 and i've done all the update to 3.2.2 without any problem
So none tried to do the same thing with Jelly Bean roms right?

FollonSaxBass said:
Thank you very much adamuadamu... It worked very well for me... I installed jetmod 3.0 and i've done all the update to 3.2.2 without any problem
So none tried to do the same thing with Jelly Bean roms right?
Click to expand...
Click to collapse
I'm pretty sure JB ROMs will have the same issues that GB non-P ROMs had....and we don't have the JB /system/tee files and kernel to deal with it
My life has more downs than ups, but I try to keep it a balance.

CallMeVentus said:
I'm pretty sure JB ROMs will have the same issues that GB non-P ROMs had....and we don't have the JB /system/tee files and kernel to deal with it
My life has more downs than ups, but I try to keep it a balance.
Click to expand...
Click to collapse
I think the lib/tee files are the main concern at the moment to get JB ported.
I have downloaded official kernel sources for i9070. And it includes config for 9070P as well. I managed to build the 4.1.2 kernel image for 9070P. But I don't really want to test it myself. I am not confident that it won't brick my device
So far, most of brave ones who have tried 9070 JB image on P-device have got a brick. If anyone could explain the reason, would be nice.
Does anyone know, if the reason is wrong kernel? Or is there something else in the JB installer that causes that. Some hboot partition or something?
Modem partition?

[SOLVED] com.phone.android crash after 4.3 GE CustomROM Update (Pepephone crash)

Hello everyone,
Yesterday I decided to flash an updated ROM of 4.3 to my One. After flashing it (happens with new ROM, or after flashing a new custom kernel... logo2menu, you know), a message appears ALWAYS on-screen:
com.phone.android has stopped working​
This message repeats a hundred times. I can't type anything without the message popping up. I reached the launcher, but I have no Phone signal and the WiFi is not working. It's like the phone wants to wake up the Phone Antenna but it crashes to do it.
I've read that I had to flash the boot.img from the ROM I wish to flash, and I don't know if that causes the problem...
Any help would be perfect.
Thank you in advance.
=====================================================================================
SOLVED!
Well, after my vacation, took my One and did a bit of research. I know everything about this problem now.
The problem is only in GE ROMS. Why? 4.3 GE hasn't listed my MVNO yet (known error by Android and by 'Pepephone'). So, as soon the mobile goes on, Android tries to connect to the SIM, but as it's not listed amongst the companies, the phone crashes. I had to flash a file with the APN, then add it manually. Ta-Da! It works.
Attached the ZIP file to flash in Recovery.
- Install 4.3 GE Rom.
- Flash the Fix.
- Start and complete the Install Wizard.
- Inside the APN config, manually introduce Pepephone's APN
o NAME: Pepephone
o APN: gprsmov.pepephone.com
o MCC: 214
o MNC: 06

Sorry to bump the thread, but currently I have a HTC One with no phone and it's really important for me to solve this asap. I'm going on vacation tomorrow and I need my phone

raulongo said:
Sorry to bump the thread, but currently I have a HTC One with no phone and it's really important for me to solve this asap. I'm going on vacation tomorrow and I need my phone
Click to expand...
Click to collapse
Are you using a custom kernel that matches, exactly, the 4.3 custom rom you are using? If it is a GE 4.3 based rom, you need a GE 4.3 custom kernel (check out ElementalX). If it is a Sense 4.3 base rom, well that update just came out yesterday and there are no custom kernels for it yet.

dgtiii said:
Are you using a custom kernel that matches, exactly, the 4.3 custom rom you are using? If it is a GE 4.3 based rom, you need a GE 4.3 custom kernel (check out ElementalX). If it is a Sense 4.3 base rom, well that update just came out yesterday and there are no custom kernels for it yet.
Click to expand...
Click to collapse
It happens with EVERY 4.3 GE Rom, stock kernel. I was in 4.2.2 GE (Android Revolution) and Installed 4.3 and gave me that error all the time without upgrading the Kernel... I'm pretty lost.

raulongo said:
It happens with EVERY 4.3 GE Rom, stock kernel. I was in 4.2.2 GE (Android Revolution) and Installed 4.3 and gave me that error all the time without upgrading the Kernel... I'm pretty lost.
Click to expand...
Click to collapse
It sounds like there is an incompatibility with the new base. I would reflash the rom, doing a full wipe in the process

dgtiii said:
It sounds like there is an incompatibility with the new base. I would reflash the rom, doing a full wipe in the process
Click to expand...
Click to collapse
Full wipe means to wipe/factory reset in ClockWork Recovery before flashing? I already did that like dozen times, but still, same error I don't know why I'm the only one with this problem...

raulongo said:
Full wipe means to wipe/factory reset in ClockWork Recovery before flashing? I already did that like dozen times, but still, same error I don't know why I'm the only one with this problem...
Click to expand...
Click to collapse
The Roms I've used have an option for full wipe during the install in Aroma, but I guess doing it in CWM does the same thing. Are you theming the phone app by any chance? Something isn't playing nice with the 4.3 base, that's what you have to track down. Maybe go back to 4.2 while you sort it out

dgtiii said:
The Roms I've used have an option for full wipe during the install in Aroma, but I guess doing it in CWM does the same thing. Are you theming the phone app by any chance? Something isn't playing nice with the 4.3 base, that's what you have to track down. Maybe go back to 4.2 while you sort it out
Click to expand...
Click to collapse
Yup, did it inside the installer and outside it, but always same result. I'm back now into 4.2.2 Sense AR Rom and the phone works great, but I hate Sense.
Could it be the baseband firmware?

raulongo said:
Yup, did it inside the installer and outside it, but always same result. I'm back now into 4.2.2 Sense AR Rom and the phone works great, but I hate Sense.
Could it be the baseband firmware?
Click to expand...
Click to collapse
Firmware could be the case, was just thinking that.
My advice tho, you have a working phone, and with your vacation tomorrow, I would leave it as is for now

dgtiii said:
Firmware could be the case, was just thinking that.
My advice tho, you have a working phone, and with your vacation tomorrow, I would leave it as is for now
Click to expand...
Click to collapse
Thank you for your help. I will investigate a bit more as soon as I'm back.

raulongo said:
Thank you for your help. I will investigate a bit more as soon as I'm back.
Click to expand...
Click to collapse
Sounds good, you're welcome. Enjoy your vacation!

I have the exact same problem. I've literally tried everything. I have S-Off-ed my phone and installed a custom kernel but even that does not fix the problem. All custom 4.3 Google Edition Roms crash after I install them. It works fine if I use the Stock 4.3 ROM.

Kernel
Sent from my HTC One using XDA Premium HD app

dgtiii said:
Sounds good, you're welcome. Enjoy your vacation!
Click to expand...
Click to collapse
A little update. I've got Cyanogen 10.2 working perfectly in my phone. It's running 4.3, so now, I understand even less. Why CM works and the other ROMs doesn't?
The night is long... Hahah.

CM 10.2 works flawlessly "without" bugs. I don't understand why CM 10.2 (JB 4.3) works and the other 4.3 GE does not. Something is not right, or maybe I'm missing some step, but it's really strange...

raulongo said:
Hello everyone,
Yesterday I decided to flash an updated ROM of 4.3 to my One. After flashing it (happens with new ROM, or after flashing a new custom kernel... logo2menu, you know), a message appears ALWAYS on-screen:
com.phone.android has stopped working​
This message repeats a hundred times. I can't type anything without the message popping up. I reached the launcher, but I have no Phone signal and the WiFi is not working. It's like the phone wants to wake up the Phone Antenna but it crashes to do it.
I've read that I had to flash the boot.img from the ROM I wish to flash, and I don't know if that causes the problem...
Any help would be perfect.
Thank you in advance.
Click to expand...
Click to collapse
If you simply need a working phone, return to stock for your vacation, and then start from scratch re-flashing the GE firmware, kernels and rom. If anything is sense on the phone, incompatibility issues will happen.

kibmikey1 said:
If you simply need a working phone, return to stock for your vacation, and then start from scratch re-flashing the GE firmware, kernels and rom. If anything is sense on the phone, incompatibility issues will happen.
Click to expand...
Click to collapse
Finally found a solution to the crash. It was related to a weird combination between GE 4.3 and my mobile network operator, Pepephone. Known bug by Android and Pepephone.
Solution at the first post.

[Q] (Q) Problem with Carbon and Mahdi Rom

I 've tried both roms (clean install) but only the front camera is working (model d405n)
I 've tried with CWM and TWR but with the same result.
Is there any fix for that?

No idea... Have you done a full wipe?
(If you realy want, you can restore everything with kdz en start all over again?)

We have one guy on polish forum with the same issue. Strange thing, as if there is more than one d405 variant.

Yes i did a full wipe.
I restore with kdz, root again, full wipe, install rom, and the problem still exist

is there any kernel i can use?

I use the latest CarbonROM (CARBON-KK-UNOFFICIAL-20141004-1556) for my D405n and front camera works. Are you sure you flashed the correct bootloader image (boot.img)?

i can not find a link for that build. Can you please post a link here?

I use this boot
L90_D405n_v10b_aboot.zip
from
http://forum.xda-developers.com/lg-l90/general/guide-unlock-bootloader-flash-custom-t2839690

giannis_25 said:
I use this boot
L90_D405n_v10b_aboot.zip
from
http://forum.xda-developers.com/lg-l90/general/guide-unlock-bootloader-flash-custom-t2839690
Click to expand...
Click to collapse
I haven't seen anybody got fix for that yet and it may me a little problem since most users don't experience this bug whilist having the same phone version. Maybe some dev might look into it and tell you at least what it is caused by

Appreciate your help on my LG G4 H811

Hi, guys:
I really need some help to make my LG G4 H811 work.
I flashed latest lineage-14.1-20170404-nightly-h811-signed.zip but my camera app "Keeps Stop Working". I tried other camera apps, none of them work.
I also flashed cm-13.0-20161010-NIGHTLY-h811.zip, same problem
I even flashed stock (but rooted) ROM, LG-G4-H811-20R-Stock-Debloated-Rooted, still the same problem.
I am using twrp-3.0.3-0-h811.img (the latest version for H811) and flash my phonh using ROMs from SD card.
Before I flash anything, the camera worked fine out of box.
Should I bring back stock ROM with LGUP/KDZ? However, I really need some 3rd party ROM working because I need multiple-user feature which is disabled in Stock ROM.
Any suggestion is very much appreciated.

eruisi said:
Hi, guys:
I really need some help to make my LG G4 H811 work.
I flashed latest lineage-14.1-20170404-nightly-h811-signed.zip but my camera app "Keeps Stop Working". I tried other camera apps, none of them work.
I also flashed cm-13.0-20161010-NIGHTLY-h811.zip, same problem
I even flashed stock (but rooted) ROM, LG-G4-H811-20R-Stock-Debloated-Rooted, still the same problem.
I am using twrp-3.0.3-0-h811.img (the latest version for H811) and flash my phonh using ROMs from SD card.
Before I flash anything, the camera worked fine out of box.
Should I bring back stock ROM with LGUP/KDZ? However, I really need some 3rd party ROM working because I need multiple-user feature which is disabled in Stock ROM.
Any suggestion is very much appreciated.
Click to expand...
Click to collapse
mmmm maybe its twrp.. not sure wich one i used that whenever i flash a rom it gave me errors non stope of camera.. and other stuff... you should use steadyfastx twrp not official.. its a beta..
twrp-3.1.0-0_BETA-h811_h815-steadfasterX-build1.img
only thing is missing that i know is reboot to recovery from recovery...
link here..
try installing twrp.. then flash rom and see i f you get error..if you do KDZ then install this.. and then flash rom good luck
http://forum.xda-developers.com/devdb/project/?id=16696#downloads

raptorddd said:
mmmm maybe its twrp.. not sure wich one i used that whenever i flash a rom it gave me errors non stope of camera.. and other stuff... you should use steadyfastx twrp not official.. its a beta..
twrp-3.1.0-0_BETA-h811_h815-steadfasterX-build1.img
only thing is missing that i know is reboot to recovery from recovery...
link here..
try installing twrp.. then flash rom and see i f you get error..if you do KDZ then install this.. and then flash rom good luck
http://forum.xda-developers.com/devdb/project/?id=16696#downloads
Click to expand...
Click to collapse
thank you for the kindly reply. The issue has been solved by flash Stock 20p KDZ first in download mode then flash the same LineageOS through TWRP. Not sure which step really fixed the issue though.
I do have issues of video recording for 4K and 1080p, which is OK to me for now.