Bricked my Galaxy - Galaxy Tab Q&A, Help & Troubleshooting

As it stands, my Galaxy Tab is currently bricked. This basically happened while trying to install technomancer's kernel. I can't boot into stock recovery, or clockworkmod. I've looked really hard, but couldn't find a tar that I could easily flash via odin. I have the GT P1000

Use overcome method. Follow my signature.
That is assuming you have GB before.
Or if Froyo, an unlocked bootloader.
Sent from my GT-P1000 using xda app-developers app

Related

[Q] HELP, How to flash CMW Recover using Odin on Samsung Galaxy S

I've been searching around on xda and i can't seem to find a guide on how to Flash CMW recover using Odin on Samsung galaxy S?
If anyone can make a such guide or send a link to me, it would be nice.
- Thanks
If you're rooted download rom manager from the market and use the app to flash cwm.
Sent from my GT-I9000 using XDA App
Download SpeedMod Kernel and flash it. You will get CWM direclty.
If not, flash CFRoot (which is a 3E Recovery Kernel). Then install ROM manager from Market and follow the instructions to install CWM.

Putting Permanent CWM and Roms on tab?

Hello,
I just bought and received a tmobile 16 gb tab today off of ebay. Im not new to android. I have a droid pro and tmobile g2x. Both have cwm and able to replace factory recovery with cwm.
The tab is already rooted via superoneclick, chainfire's patch been applied.
I tried searching for cwm permanent for the tab but seem to not find a clear cut process to get a cwm recovery. Can anyone please point me in the right direction. My tab is currently running 2.2 foyo. I already know since the tab has different version and is available for many carriers, that roms are very different
Sent from my SGH-T849 using Tapatalk
If you have a gsm version, you can flash the overcome rom, it has cwm built in. Look at the overcome site or thread for instruction.
Yeah I just read through it.
So I can go ahead and load overcome via odin? Wheres stock 2.2 firmware just incase it soft bricks?
Its a gsm tab but I only use it over wifi
And should download jupiter nowipe or wipe version?
Sent from my SGH-T849 using Tapatalk
Suprah said:
Yeah I just read through it.
So I can go ahead and load overcome via odin? Wheres stock 2.2 firmware just incase it soft bricks?
Its a gsm tab but I only use it over wifi
And should download jupiter nowipe or wipe version?
Sent from my SGH-T849 using Tapatalk
Click to expand...
Click to collapse
You need to flash stock gingerbread, and then overcome wipe, its all in the instructions, good luck!
natious said:
You need to flash stock gingerbread, and then overcome wipe, its all in the instructions, good luck!
Click to expand...
Click to collapse
thank you very much, im downloading the stock safe v5 gingerbread from their site
what happens if i want to flash the cm7 testing rom or another rom in the forum? would cwm disappear?
or is it in essence perm. cwm even if i switch roms
so i followed instructions to the T and odin tool saying fail so i guess it has been bricked
im re-trying again
do i select re-partition?? because odin tool is doing nothing after retrying
have you checked your bootloader as tell in the tutorial ?
It fails at which step ? Is your bootloader locked or unlocked ? Did you put it in download mode ?
Thanks for the concerns, i ended up fixing the issue
Let it die and tested to see if it even charged when i connected it to power outlet. With stroke of luck, got it back to dl mode and now running overcome
If i flash a different rom will overcome kernel will still be on my tab? So i can keep cmw on it?
Sent from Galaxy Tab 7" W/ Overcome Rom
If you flash via cwm, you will still have cwm.
Cool thanks. So it will keep the kernel unless I flash a new one via odin
Ima try flash cm7 build via cwm
Sent from Galaxy Tab 7" W/ Overcome Rom
Beware not all zip files are flashable with cwm. If it's not specified, don't do it or you will brick your tab.
Suprah said:
Cool thanks. So it will keep the kernel unless I flash a new one via odin
Ima try flash cm7 build via cwm
Sent from Galaxy Tab 7" W/ Overcome Rom
Click to expand...
Click to collapse
If you are going to try cm7 its best to flash stock safe gingerbread again, and flash cm7 through hiedmal rather than cwm
Sent from my GT-P1000 using XDA Premium App
natious said:
If you are going to try cm7 its best to flash stock safe gingerbread again, and flash cm7 through hiedmal rather than cwm
Sent from my GT-P1000 using XDA Premium App
Click to expand...
Click to collapse
Dont know how to use hiedmal. Looms complicated and there is no video tutorials on it
I was thinking of flashing back to stock safe then flashing overcome kernel via odin then flash cm7 and via cwm
Sent from my GT-P1000 using Tapatalk
Suprah said:
Dont know how to use hiedmal. Looms complicated and there is no video tutorials on it
I was thinking of flashing back to stock safe then flashing overcome kernel via odin then flash cm7 and via cwm
Sent from my GT-P1000 using Tapatalk
Click to expand...
Click to collapse
Its really easy man, everything its labelled where it goes
Sent from my GT-P1000 using XDA Premium App
Dont you need to use command prompt to run heimdall....
Sent from my GT-P1000 using Tapatalk

Bricked my Galaxy Tab

As it stands, my Galaxy Tab is currently bricked. This basically happened while trying to install technomancer's kernel. I can't boot into stock recovery, or clockworkmod. I've looked really hard, but couldn't find a tar that I could easily flash via odin. I have the GT P1000. Thanks.
Use overcome method, link is in my signature.
Sent from my GT-P1000 using xda app-developers app

[Q] How to install CWM recovery of Captivate?

I have tried to flash speedmod kernel and use CWM from there but when i try to flash a rom it doesnt work and when i try to reboot it gets stuck at the boot animation. is there a way you can install CWM recovery that actually works? also if you can find an app like SGS kernel flasher except that flashes roms instead? i have tried using ROM Manager to flash CWM but all that happens is it says successfully flashed CWM recovery then when i boot into recovery it goes into android recovery 3e.
Rooted Samsung Captivate i897
use one click back to stock
Hello, what I do every time im stuck is go back to stock KK4 using one click odin.
from there then I use Odin 1.85 to flash Korn kernel.
Korn kernel include cwm, from there you can install other Roms or kernels, or just root.
regards.
Zestar said:
Hello, what I do every time im stuck is go back to stock KK4 using one click odin.
from there then I use Odin 1.85 to flash Korn kernel.
Korn kernel include cwm, from there you can install other Roms or kernels, or just root.
regards.
Click to expand...
Click to collapse
In addition to what Zestar suggested I would recommend the KK4 with boot loaders.
Sent from my SGH-I897 using xda app-developers app
Same thing with mine.
I want to have a cwm recovery, but i'm afraid to bricked again my captivate. Can someone make a step-by-step on how to get a cwm recovery?
thanks.
Sent from my SAMSUNG-SGH-I897 using xda premium
vergtot said:
Same thing with mine.
I want to have a cwm recovery, but i'm afraid to bricked again my captivate. Can someone make a step-by-step on how to get a cwm recovery?
thanks.
Sent from my SAMSUNG-SGH-I897 using xda premium
Click to expand...
Click to collapse
Would help to know what is your goal (flash rom, kernel, modem or simply having cwm recovery). There is a well written guide in the Q&A: http://forum.xda-developers.com/showthread.php?t=1350266
But Zestar pretty much explained it. You'll need Odin 1.85 (which you will find in the guide) and a custom kernel (doesn't matter much which one as long as it supports cwm recovery). You have a lot of reading to do before jumping into this and I highly suggest it! I also bricked once outta being hasty, won't happen again

[Q] Galaxy P1000m stuck on logo

I flash my p1000m using heimdall with p1000 file, now the phone stucks at the samsung logo during booting.
I have downloaded all possible p1000m files from bell and flash the tab using odin still no change, even overcome did not solved my problem.
Please help.
So you have flashed GB stock save v5 from overcome using Odin 1.7 with pit file and repartition checked and it doesn't boot?
just to be sure, the overcome link is in my signature.
Sent from my GT-P1000 using xda app-developers app

Categories

Resources