Bricked my Galaxy Tab - Galaxy Tab Q&A, Help & Troubleshooting

As it stands, my Galaxy Tab is currently bricked. This basically happened while trying to install technomancer's kernel. I can't boot into stock recovery, or clockworkmod. I've looked really hard, but couldn't find a tar that I could easily flash via odin. I have the GT P1000. Thanks.

Use overcome method, link is in my signature.
Sent from my GT-P1000 using xda app-developers app

Related

[Q] HELP, How to flash CMW Recover using Odin on Samsung Galaxy S

I've been searching around on xda and i can't seem to find a guide on how to Flash CMW recover using Odin on Samsung galaxy S?
If anyone can make a such guide or send a link to me, it would be nice.
- Thanks
If you're rooted download rom manager from the market and use the app to flash cwm.
Sent from my GT-I9000 using XDA App
Download SpeedMod Kernel and flash it. You will get CWM direclty.
If not, flash CFRoot (which is a 3E Recovery Kernel). Then install ROM manager from Market and follow the instructions to install CWM.

Putting Permanent CWM and Roms on tab?

Hello,
I just bought and received a tmobile 16 gb tab today off of ebay. Im not new to android. I have a droid pro and tmobile g2x. Both have cwm and able to replace factory recovery with cwm.
The tab is already rooted via superoneclick, chainfire's patch been applied.
I tried searching for cwm permanent for the tab but seem to not find a clear cut process to get a cwm recovery. Can anyone please point me in the right direction. My tab is currently running 2.2 foyo. I already know since the tab has different version and is available for many carriers, that roms are very different
Sent from my SGH-T849 using Tapatalk
If you have a gsm version, you can flash the overcome rom, it has cwm built in. Look at the overcome site or thread for instruction.
Yeah I just read through it.
So I can go ahead and load overcome via odin? Wheres stock 2.2 firmware just incase it soft bricks?
Its a gsm tab but I only use it over wifi
And should download jupiter nowipe or wipe version?
Sent from my SGH-T849 using Tapatalk
Suprah said:
Yeah I just read through it.
So I can go ahead and load overcome via odin? Wheres stock 2.2 firmware just incase it soft bricks?
Its a gsm tab but I only use it over wifi
And should download jupiter nowipe or wipe version?
Sent from my SGH-T849 using Tapatalk
Click to expand...
Click to collapse
You need to flash stock gingerbread, and then overcome wipe, its all in the instructions, good luck!
natious said:
You need to flash stock gingerbread, and then overcome wipe, its all in the instructions, good luck!
Click to expand...
Click to collapse
thank you very much, im downloading the stock safe v5 gingerbread from their site
what happens if i want to flash the cm7 testing rom or another rom in the forum? would cwm disappear?
or is it in essence perm. cwm even if i switch roms
so i followed instructions to the T and odin tool saying fail so i guess it has been bricked
im re-trying again
do i select re-partition?? because odin tool is doing nothing after retrying
have you checked your bootloader as tell in the tutorial ?
It fails at which step ? Is your bootloader locked or unlocked ? Did you put it in download mode ?
Thanks for the concerns, i ended up fixing the issue
Let it die and tested to see if it even charged when i connected it to power outlet. With stroke of luck, got it back to dl mode and now running overcome
If i flash a different rom will overcome kernel will still be on my tab? So i can keep cmw on it?
Sent from Galaxy Tab 7" W/ Overcome Rom
If you flash via cwm, you will still have cwm.
Cool thanks. So it will keep the kernel unless I flash a new one via odin
Ima try flash cm7 build via cwm
Sent from Galaxy Tab 7" W/ Overcome Rom
Beware not all zip files are flashable with cwm. If it's not specified, don't do it or you will brick your tab.
Suprah said:
Cool thanks. So it will keep the kernel unless I flash a new one via odin
Ima try flash cm7 build via cwm
Sent from Galaxy Tab 7" W/ Overcome Rom
Click to expand...
Click to collapse
If you are going to try cm7 its best to flash stock safe gingerbread again, and flash cm7 through hiedmal rather than cwm
Sent from my GT-P1000 using XDA Premium App
natious said:
If you are going to try cm7 its best to flash stock safe gingerbread again, and flash cm7 through hiedmal rather than cwm
Sent from my GT-P1000 using XDA Premium App
Click to expand...
Click to collapse
Dont know how to use hiedmal. Looms complicated and there is no video tutorials on it
I was thinking of flashing back to stock safe then flashing overcome kernel via odin then flash cm7 and via cwm
Sent from my GT-P1000 using Tapatalk
Suprah said:
Dont know how to use hiedmal. Looms complicated and there is no video tutorials on it
I was thinking of flashing back to stock safe then flashing overcome kernel via odin then flash cm7 and via cwm
Sent from my GT-P1000 using Tapatalk
Click to expand...
Click to collapse
Its really easy man, everything its labelled where it goes
Sent from my GT-P1000 using XDA Premium App
Dont you need to use command prompt to run heimdall....
Sent from my GT-P1000 using Tapatalk

GT-p1000 stuck at samsung logo

so i was flowing the guide on cyanogenmod to install the CMW
after i successfully installed it the device booted up and just stayed at the Samsung logo. please help me
Use overcome method.
Read my post here.
http://forum.xda-developers.com/showthread.php?p=27500461
Replace anything AOKP with cm9 there, but the install method is the same.
Sent from my GT-P1000 using xda app-developers app
priyana said:
Use overcome method.
Read my post here.
http://forum.xda-developers.com/showthread.php?p=27500461
Replace anything AOKP with cm9 there, but the install method is the same.
Sent from my GT-P1000 using xda app-developers app
Click to expand...
Click to collapse
so i did do that just now but it didnt work i used another process and know my tab goes into CWM and when i wipe data,cache and dalivk then i install the CM9 it boots then i see the logo of cyanogenmod then it boots into CWM with out me holding any buttons
then flash CM9 again once more.
First round converts BML partition to MTD partition
priyana said:
then flash CM9 again once more.
First round converts BML partition to MTD partition
Click to expand...
Click to collapse
sweet it worked thanks!!!!!
it is well documented, the bootloop when come from non-MTD.
Remember to flash gapps-ics
priyana said:
it is well documented, the bootloop when come from non-MTD.
Remember to flash gapps-ics
Click to expand...
Click to collapse
already did and thanks for the help
Galaxy tab stuck on samsung logo
Hi,
my p1000 is stuck on the samsung logo screen, Ive tried following all documentation, it says to copy the files to the external sd card, how do i get to external sd card if the tab wont boot up and windows cant see the device???
sorry to be a pain
Can you boot to recovery or download mode?
What have you done so far to get to this stage.
Sent from my GT-P1000 using xda app-developers app
hi my galaxy tab was on ics and i tried to flash back original gingerbread rom, i flashed through odin which everything passed, it then boots up with recovery does what it does, powers back on but its stuck on samsung logo, it was purchased from carphone warehouse, does anyone know wha i did wrong
Were you using overcome gb stock safe v5?
And make sure you use the Odin of correct version, like the one in the package.
Sent from my GT-P1000 using xda app-developers app
priyana said:
Can you boot to recovery or download mode?
What have you done so far to get to this stage.
Sent from my GT-P1000 using xda app-developers app
Click to expand...
Click to collapse
Hey Priyana, I got the same problem.
I can boot to download mod but cant boot recovery mod, and my device is also not recognized when connected to PC
Any suggestion?
Usually just have to keep trying for Odin to detect the device.
Failing that you need a fresh pc.
Sent from my GT-I9300 using xda app-developers app
debrick galaxy tab
see my thread > http://forum.xda-developers.com/showthread.php?p=34872552#post34872552
Hi, please keep all question/help related threads in the Q&A section only please. Thank You.
Thread Moved.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
"If you choose not to decide, you still have made a choice"
Sent from my Galaxy Note (i717), using XDA Premium.
i have the same problem stuck on samsung logo after installing cwm , i tried to use the overcome through odin but in download mode it doesnt recognise my phone only when i put it in recovery mode(power button and volume UP button pressed) it recognise it but when i press start( after i have put the firmware the pit file etc. and then conecting my tab) odin stacks at set up connection ... im really confused if anyopne can help i would really apreciate it.
ps. i have a sim card on and an sd tried to remove sd but made no difference
ty in advance
Another guy got the same issue, can't detect in Odin.
he went to safe mode to remove the Samsung USB driver and reinstall the one from gb-stock-safe-v5 and was good.
Sent from my GT-P1000 using xda app-developers app
priyana said:
Another guy got the same issue, can't detect in Odin.
he went to safe mode to remove the Samsung USB driver and reinstall the one from gb-stock-safe-v5 and was good.
Sent from my GT-P1000 using xda app-developers app
Click to expand...
Click to collapse
theanks a lot but im not an advance usere can you tell me how can i do that i mean i remove the driver on my pc( in de vice manager is recognised as gadget serial) and after were can i find gb-stock-safe-v5
thankls again again for spending time to answear my problem
also in what state should my device be when to plug it etc ty again
follow my signature go get the GB-stock-safe-v5 and also the overcome guide.
Follow the page 7 instruction on how to use Odin.
The Odin needs to be version 1.7, like the one included in GB-stock-safe-v5
When driver is good, Odin detects your tab when it is in Download mode, and you can flash the GB-stock-safe-v5
priyana said:
follow my signature go get the GB-stock-safe-v5 and also the overcome guide.
Follow the page 7 instruction on how to use Odin.
The Odin needs to be version 1.7, like the one included in GB-stock-safe-v5
When driver is good, Odin detects your tab when it is in Download mode, and you can flash the GB-stock-safe-v5
Click to expand...
Click to collapse
thak you very much for the quick response i will post results

[Q] Galaxy P1000m stuck on logo

I flash my p1000m using heimdall with p1000 file, now the phone stucks at the samsung logo during booting.
I have downloaded all possible p1000m files from bell and flash the tab using odin still no change, even overcome did not solved my problem.
Please help.
So you have flashed GB stock save v5 from overcome using Odin 1.7 with pit file and repartition checked and it doesn't boot?
just to be sure, the overcome link is in my signature.
Sent from my GT-P1000 using xda app-developers app

Bricked my Galaxy

As it stands, my Galaxy Tab is currently bricked. This basically happened while trying to install technomancer's kernel. I can't boot into stock recovery, or clockworkmod. I've looked really hard, but couldn't find a tar that I could easily flash via odin. I have the GT P1000
Use overcome method. Follow my signature.
That is assuming you have GB before.
Or if Froyo, an unlocked bootloader.
Sent from my GT-P1000 using xda app-developers app

Categories

Resources