I flash my p1000m using heimdall with p1000 file, now the phone stucks at the samsung logo during booting.
I have downloaded all possible p1000m files from bell and flash the tab using odin still no change, even overcome did not solved my problem.
Please help.
So you have flashed GB stock save v5 from overcome using Odin 1.7 with pit file and repartition checked and it doesn't boot?
just to be sure, the overcome link is in my signature.
Sent from my GT-P1000 using xda app-developers app
Related
Odin gets stuck when trying to flash JV1....
Gladly I can still use download mode so I'm able to restore my galaxy s....
But I really want to install gingerbread... any ideas on how to install it?
I uploaded an image of the part where the flashing gets stuck... in the image iim using pit 512 but I have also tried with 803 and I get the same result... after odin fails I can disconnect my galaxy s... and boot into download mode again
Have you tried to download odin 1.3 maybe this one is corrupted. Try to restart pc, run odin, put all files, connect the device.
Sent from my GT-I9000 using XDA App
I 've had the same problem. Flash with Odin 1.3 should work.
I tried with odin 1.3 too...
And it didn't work either =/
I was also stuck and i flashed darky's odin rom. Than i have flashed stock gingerbread, flashed 2.2 speedmod kernel and finally i have flashed ultibread via cwm.......so try flashing other rom
renatofontes said:
I tried with odin 1.3 too...
And it didn't work either =/
Click to expand...
Click to collapse
Sent from my GT-I9000 using XDA App
themate1987 said:
I was also stuck and i flashed darky's odin rom. Than i have flashed stock gingerbread, flashed 2.2 speedmod kernel and finally i have flashed ultibread via cwm.......so try flashing other rom
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
i am on darkeys 9.3 now how can i flash ultibread 1.4 pl guide me step by step
I will PM when i get home
naishadh said:
i am on darkeys 9.3 now how can i flash ultibread 1.4 pl guide me step by step
Click to expand...
Click to collapse
Sent from my GT-I9000 using XDA App
themate1987 said:
I was also stuck and i flashed darky's odin rom. Than i have flashed stock gingerbread, flashed 2.2 speedmod kernel and finally i have flashed ultibread via cwm.......so try flashing other rom
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
Sadly that didn't work either... D:
I'm downloading the JV1 rom directly from samfirmware and if ir doesn't work again I'll try flashing from another computer =)
Well now that JVK has been released I tried flashing that too...
And I can't
It's really weird the bootloaders just don't seem to want to get into my phone x3
I tried using odin and heimdall using the version with the safe bootloaders and it never flashed completely.
Gladly my phone hasn't been bricked... maybe it's because odin and heimdall don't ever get close to flashing the bootloader?
Anyway... I have a mexican galaxy s... I think the name of the model is I9000T
Can someone help?
i tried flashing galaxy tab with 2.3.3 rom downloaded from samfirmware.com but it failed. then i tried flashed 2.2 rom and the result still the same. i read from the net that new firmware have locked bootloader and i suspect my tab bootloader has been locked after tried flashing the 2.3.3 rom. i know that there is patch to unlock the bootloader but it only apply when the tab is turned on. in my case the tab won't boot. is there any chance that there is patch that can be applied via download mode? or any other possible fix?
thanks in advance.
Try to wait a little longer. The first boot takes time.
Sent from my GT-P1000 using XDA App
aibo said:
Try to wait a little longer. The first boot takes time.
Sent from my GT-P1000 using XDA App
Click to expand...
Click to collapse
but the odin shows FAILED instead of PASS. is there any hope that it can boot?
Weird, odin failed at which point ? If it failed then you can't be stuck at boot screen if I remember correctly.
Sent from my GT-P1000 using XDA App
z4520ft said:
i tried flashing galaxy tab with 2.3.3 rom downloaded from samfirmware.com but it failed. then i tried flashed 2.2 rom and the result still the same. i read from the net that new firmware have locked bootloader and i suspect my tab bootloader has been locked after tried flashing the 2.3.3 rom. i know that there is patch to unlock the bootloader but it only apply when the tab is turned on. in my case the tab won't boot. is there any chance that there is patch that can be applied via download mode? or any other possible fix?
thanks in advance.
Click to expand...
Click to collapse
Is your tab still able to go to download mode?
If yes. Try flashing 2.3.3 from this forum and follow chainfire instructions. Don't download ROM from samfirmware. Just browse the Dev section and you will find everything you need to flash 2.3.3.
Good luck
Go here http://forum.xda-developers.com/showthread.php?t=1073854
SGT Running Overcome 2.0.0 RC1
My tab did the same thing, download the rom from overcome thread, put your tab in download mode and reflash
Sent from my GT-P1000 using XDA Premium App
Based on the log, it failed after all files in .tar has been processed. After that it shows phone n pc/modem pc screen. Then i flash the .pit file only to be able to enter download mode again (android with shovel)
Thanks for the help, i'll try it once i back home. Hope it'll be success
Sent from my U20i using XDA App
z4520ft said:
Based on the log, it failed after all files in .tar has been processed. After that it shows phone n pc/modem pc screen. Then i flash the .pit file only to be able to enter download mode again (android with shovel)
Thanks for the help, i'll try it once i back home. Hope it'll be success
Sent from my U20i using XDA App
Click to expand...
Click to collapse
Just follow the instructions in the link i provided in the previous post and you'll be fine. Please do not skip steps.
SGT Running Overcome 2.0.0 RC1
As it stands, my Galaxy Tab is currently bricked. This basically happened while trying to install technomancer's kernel. I can't boot into stock recovery, or clockworkmod. I've looked really hard, but couldn't find a tar that I could easily flash via odin. I have the GT P1000. Thanks.
Use overcome method, link is in my signature.
Sent from my GT-P1000 using xda app-developers app
Hello
First i need a little help please.My Galaxy TAB P1000 stuck in Samsung logo.
I tried to flash first dbdata with Odin 1.7,but no luck.I tried many procedures, but still appear error message in boot menu.
Than tried to flash it with new rom GB_Stock_Safe_v5 in Odin PDA an PIN.
All people i read about the problem,they have successful flash with dbdata
Please help me to do it step by step.tnx
Do not post problem in DEVELOPMENT forum.
Sent from my GT-P1000 using xda app-developers app
yes i know,i saw later.can admin move this thread to help forum
i will try to use OVERCOME instalation guide,but i have one question.I cant paste the file to the TAB,because it is stucked in the samsung logo and computer dont recognize it as removable disc to paste overcome_4.0.0_wipe.zip
please any suggestions?
The first part of overcome need you to flash gb-stock-safe-v5 using Odin. Then you have a working tab with stock Samsung. You can figure out how to use copy file to it by then.
Second part to flash overcome kernel using Odin.
Seems to me you haven't even read the guide.....?
Sent from my GT-P1000 using xda app-developers app
No,i read all the guide,but after flash with gb-stock-safe-v5 using Odin some voice from tab said there is not enough space on partition.So after the flash i didnt have working tab.I can access to the download mode and recovery,but still stuck on samsung logo at the beginning.
Is it possible that internal SD gone bad??
fortyc said:
No,i read all the guide,but after flash with gb-stock-safe-v5 using Odin some voice from tab said there is not enough space on partition.So after the flash i didnt have working tab.I can access to the download mode and recovery,but still stuck on samsung logo at the beginning.
Is it possible that internal SD gone bad??
Click to expand...
Click to collapse
Didn't you first repartition by flashing the gt-p1000_mr.pit file in Odin?
I was think of the same thing.
The Pit file will partition it correctly.
Also, I don't recall the tab on GB-stock-safe-v5 talks?
Isn't overcome kernel that talks?
thak you for your replays.
I was following this overcome guide from page 7.
First use :
1.) gt-p1000_mr.pit and GB_Stock_Safe_v5.tar and JPZ Modem with modem.bin
2.) you have working tab ( but i dont have after this ) Overcome_7_Series_v4.0.0_Wipe.zip and paste it intothe tab
3.)flash the Overcome Kernel 4.0.0
etc,etc....
This is all procedure i have done with my tab
Yes the overcome kernel talks like this
If gb-stock-safe-v5 with pit didn't give you a working tab,
Yeah, likely it is a broken internal SD.
Odin message box no error?
Sent from my GT-P1000 using xda app-developers app
No error at all.Everything was going smooth with no problems in Odin.
Probably must be a broken internal SD.Worst case scenario
Is it possible to rechange internal SD?Or i should install ROM to external SD to have a working tab
CM/AOKP ROMs use different partition.
You could give it a try and see how it goes.
Do you have external SD? Just put aokp-jb latest or cm10.1 and gapps 20130301 on external SD card,
Flash overcome kernel using Odin, and once it is done, just force it power off.
Then boot to cwm recovery and flash the ROM three times, then gapps.
Watch the cwm screen for any error.
Sent from my GT-P1000 using xda app-developers app
Yes i have external microSD slot,but i have to buy a microSD card.This is the only option to have working tab.
OK,first i will make a little research about this CM/AOKP ROMs,because this is the first time doing this,but i will learn
Can I install these CM/AOKP ROMs on internal patrition,even it is broaken or into the microSD card?
Thank you for your time and replys
For CM I think there is an option.
It was in one of the thread about Damaged Internal SD.
Sent from my GT-N7100 using xda app-developers app
If GB-Stock-Safe won't work try flashing the proper stock ROM for your tab's region and following the Overcome procedure from there.
Sent from my GT-P1000 using xda app-developers app
Its very poor with ROM and updates for our region ( Slovenia ).
Fist i will restock with rom as it was original and i will try to repair it under warranty if it is possible.
Otherwise i will try any other option to make it workable
Now i arrange that my tab will be fixed under warranty.So i will downgrade it to the stock rom Froyo 2.2
Is any evidence that i tried different roms?Do i have to be careful about something?
Or i just use Odin and flash it with PIT,PDA,PHONE,CSC files and everything will be ok?do i have to change kernel either?
because i still have problem with bad internal SD.
Thak you for your help
Ps: i will use like official rom : PIT: P1.pit
PDA : P1000XWJJ7
PHONE : P1000_XXJK5_OXAJK5 (just modem.bin file )
CSC :GT-P1000-CSC-SERJJ2
As it stands, my Galaxy Tab is currently bricked. This basically happened while trying to install technomancer's kernel. I can't boot into stock recovery, or clockworkmod. I've looked really hard, but couldn't find a tar that I could easily flash via odin. I have the GT P1000
Use overcome method. Follow my signature.
That is assuming you have GB before.
Or if Froyo, an unlocked bootloader.
Sent from my GT-P1000 using xda app-developers app