Hi,
I am new to this forum and to installing rom's etc but I have 50 HTC Diamond 2's which need the language changing so I purchased a XTC Clip. I can create the goldcard and remove the sim lock but when I try and install a WWE ROM, I get the vendor ID error, which I assume is because the CID lock is still in place.
I have tried using the hard-spl from this site, which worked for the first one, but when I try again I get the not for commercial use error and when I pay the donation, I still get the same error.
Please can someone help? Am I not using the XTC Clip correctly? I have changed the language on all of my blackstones with no problem I am just struggling with these.
Related
Hi Guys,
Firstly, i am new to this - so if i ask any stupid Q's, please forgive me
I will be getting my MDA Vario tomorrow, and before i do too much customisaton and transfer my phonebook over, i would like some advice on upgrading.
From reading this Forum, i believe that I have to do a CID unlock and a SIM unlock. I am familier with a SIM unlock, but what it a CID unlock?
Also, from what i can gather, in order to do this - i have to downgrade to an older version of the rom first. Once i have done this and unlocked the device, does anyone have any recomendations on what ROM i should upgrade it to? I have heard the Qtek rom is a good one, but will is this the best one to be going for?
Thanks for your input guys. You can be asured, once i get familier with this device i shall be providing much imput to this forum!
Glyn
Hi, I'm new to WM5/vario as well (experienced on palms & treos).
You only need to unlock the wizard if you want to use another suppliers SIM card, and to get rid of the T-Mobile stuff you need to remove the Carrier ID (CID), so you can then change the rom to another one not recognised by your TMobile rom.
I understand, but could be wrong, that you only need to down grade if your device already has one of the latest a2dp stereo roms with push email built in.
Hope this helps (if I'm right)!!!
I have a K-Jam with rom version 2.16.9.104 (Norwegian Rom)
Is it possible for me to get a English rom?
:shock:
-alex :shock:
Yes, just update your ROM with one available in whatever language you want.
ftp://xda:[email protected]/Wizard/Roms/
choose one here, make sure your sim is unlocked.
SIM lock isn't important for switching Rom, CID unlock is.
kyphur said:
SIM lock isn't important for switching Rom, CID unlock is.
Click to expand...
Click to collapse
I have tryed to CID unlock the device but it seems that it does not manage to do it.
It comes up with an error that it si not able to copy cidunlocked.bin but then it says that the phone is unlocked. but when i tryed to uppgrade the rom it says that it is not posible because of wrong vedner id.
I have tryed using aWizard-V1_3beta2 and Lokiwiz02b.
Downgrade to a 1.x Rom then CID unlock.
hi,
in a german forum i read, that only the cid unlocker which you had to pay for permanently gives you supercid status. now, i unlocked my trinity with the xda-developer version ''sspl'' for free, and want to restore the original condition, with locked cid, and original rom...
is this possible, and if it is, how?
kind regards, luki
ps: i used pofs method to unlock the trinity
Hi.
I'm searching for the same question and that's why I'm still on original WM5 ROM.
Mine is locked to Vodafone PT and I'm afraid to put another ROM like Dopod one, and if I got some problem, I don't know if it's possible to return the Trinity to the original state (CID) and send it back to waranty.
I keep an eye on this post and if you find some information, please put in here.
Good luck.
I don't think that you could CID locked your PPC !! But if it's just for going back to warranty...Often, they didn't see anything if you reinstall the original Rom ...
shym said:
I don't think that you could CID locked your PPC !! But if it's just for going back to warranty...Often, they didn't see anything if you reinstall the original Rom ...
Click to expand...
Click to collapse
Are only branded trinitys cid locked ? what is cid lock ?
CID = Customer Identity
I don't know exactly why CIDs exist but i think it has something to do with licenses and stuff like this.
And no, original HTC devices have a CID lock too.
But @ shym I think you shuold watch out for the CID bypasser, I'm pretty sure it doesn't unlock your phone but you will be able to flash other ROMs anyway...
That's exactly what I'm looking for.
A way to flash another ROM, like Dopod or coocked one, and if I don't like or need to go back to WM5, just put the operator (Vodafone) original ROM and returnt it to warranty, if is the case (hope not)
Don't want to risk my Trinity to loose the warranty if the service found the phone was CID unlocked or else.
hi there! just tried to run WWE stock rom update but get invalid vender id error. Does anybody know how this can be solved?
You will need to CID unlock your phone before you can flash non-OEM ROMs. As far as I can tell from the Jade ROM Development thread, HardSPL does not yet exist for the Jade.
ok, thanks! Guess I'll have to wait another while for it then...
CID unlocking
hi, anybody around who has a tool / knows how to CID unlock a jade?
The device is pretty new and it takes time for someone to figure out a way.
Other hand, I dont think Olipro or other senior members would get this device just for CID, SIM unlocks and Hard SPL.
So maybe you guys may need to wait a little longer..
Regards,
Carty..
Hey everyone!
This is my first post and my English is not so good.. I'm really sorry.
I want to ask about my htc touch diamond.
i bought it and is lock to Swedish 3G.
I cannnot unlock this mobile. with olinex for exempel.
It's always this newest RUU from the Htc side in swedish.
Because this friend(i bought from him)downloaded the newest RUU from htc side.
When I put the usb into the htc and start to "ROMUpdateUtility" and then "next" and "next" my mobile make black screen and in the computer is saying that is 100% and is ready and finish. and then Diamond is reset
when it's start i dont see the olinex RUU. and is always the same.
before i had another diamond and was no problem to fix this.
can somebody help me?
thank U !
LiczySiePasja said:
Hey everyone!
This is my first post and my English is not so good.. I'm really sorry.
I want to ask about my htc touch diamond.
i bought it and is lock to Swedish 3G.
I cannnot unlock this mobile. with olinex for exempel.
It's always this newest RUU from the Htc side in swedish.
Because this friend(i bought from him)downloaded the newest RUU from htc side.
When I put the usb into the htc and start to "ROMUpdateUtility" and then "next" and "next" my mobile make black screen and in the computer is saying that is 100% and is ready and finish. and then Diamond is reset
when it's start i dont see the olinex RUU. and is always the same.
before i had another diamond and was no problem to fix this.
can somebody help me?
thank U !
Click to expand...
Click to collapse
Im confused are you tying to security unlock or sim unlock your diamond?? hardspl will not sim unlock your device ......
mancsoulja said:
Im confused are you tying to security unlock or sim unlock your diamond?? hardspl will not sim unlock your device ......
Click to expand...
Click to collapse
Hi! thank u for your answer.
I mean that i had before the same diamond and was lock to swedish 3G
and i downloaded the diamond unlocker and was ok!
step 1/step 2/step 3 - HardSPL/Radio/and unlock.
i click very fast to unlock it and i had a normal phone to use.
i bought another diamond from my friend yesterday and he downloaded the newest RUU from the HTC side.
i think that this is the point. maybe they don't want people to unlock diamond with hardSPL and they make some security?
sorry for my english one more time.
Have you tried fashing a cooked rom then trying to unlock it then
Which version of spl you have ? Put your phone in 3 colour screen and give all info. If you're trying to unlock with free cracked unlocker - you won't get any help here
borce_razor said:
Which version of spl you have ? Put your phone in 3 colour screen and give all info. If you're trying to unlock with free cracked unlocker - you won't get any help here
Click to expand...
Click to collapse
Hi !
but i had before one diamond and was also lock to swedish 3G.
i unlocked with diamond unlocker without problem..
I want only to use my another card and want to change the language.
i mean that want to change also the ROM's .
Before in my first diamond i make with diamond unlocker the first step and was "3 colours" and was working. i have seen the oli pro in the start. then i make radio and step 3.
now when i make the first step is only "black screen" (then my computer show me 100% and says me is ready and finish) then my diamond is reset. and i don's se the oli pro.
is hard for me to tell u... sorry
i hope you understand.
On the start it's show me:
R 1.11.25.01
G 52.58.25.30H
D 2.03.00.00
not like:
oli pro 1.40 or somethin like this.
can anyone help?
Just bought this Sprint HTC touch Diamond... I was wondering if I change the sprint ROM to the Stock Asia Htc touch diamond rom, Would the phone be automatically unlocked or do i still need to unlock it?... please help
rncbro said:
Just bought this Sprint HTC touch Diamond... I was wondering if I change the sprint ROM to the Stock Asia Htc touch diamond rom, Would the phone be automatically unlocked or do i still need to unlock it?... please help
Click to expand...
Click to collapse
If you flash gsm rom, you will get only dead phone