So finally figured out how to flash properly but after successful flash my phone was deactivated and couldn't react oblate it what did or didn't i do
More details please...
Sent from my Amazon Kindle Fire using Tapatalk
Little help please
sd_shadow said:
More details please...
Sent from my Amazon Kindle Fire using Tapatalk
Click to expand...
Click to collapse
I made a titanium backup of user apps and data and system data followed flashing procedure for liquidsmooth v2.1 sola a rom installed in rom slot 3 as indicated installed gaps v4.2.2 as indicated activated the slot and everything boots up properly except that I lost my connection I have no serial number meid number no network or anything when I go to make a call to program phone it says turn off airplane mode did that and it still says turn off airplane mode don't know what to do wiped cache devil cache anything else?
Did you even read the comments?
[ROM][4.2.2][OFFICIAL] LiquidSmooth v2.1 - solana - 4|05|13
I think your the first to even report that they got it to booted up.
Go back into safestrap, select stock, and reboot.
sd_shadow said:
Did you even read the comments?
[ROM][4.2.2][OFFICIAL] LiquidSmooth v2.1 - solana - 4|05|13
I think your the first to even report that they got it to booted up.
Go back into safestrap, select stock, and reboot.
Click to expand...
Click to collapse
Ok so I inserted a sim and it let me program my phone I can call but no internet and still says not connected to network and my signal bars are blank just read the comments what's bad with it should I still boot back to stock?
Don't know.
In the future, if you have a problem.
Post the full names of the files you used, where you found them, and steps you used.
Sent from my Amazon Kindle Fire using Tapatalk
Little help please
sd_shadow said:
Don't know.
In the future, if you have a problem.
Post the full names of the files you used, where you found them, and steps you used.
Sent from my Amazon Kindle Fire using Tapatalk
Click to expand...
Click to collapse
Ok thanks for the help are there any roms you could reccomend that actually work properly when you install them? Would be greatly appreciated running stock Motorola droid 3 xt862
Any of the gingerbread ROMs like minimoto.
Only ICS ROM I like is steel droid 5.6.
Non of the jellybean ROMs well imo
Sent from my Amazon Kindle Fire using Tapatalk
Little help please
sd_shadow said:
Any of the gingerbread ROMs like minimoto.
Only ICS ROM I like is steel droid 5.6.
Non of the jellybean ROMs well imo
Sent from my Amazon Kindle Fire using Tapatalk
Click to expand...
Click to collapse
Ok thanks and do you want me to research those files and sites and post them still or no?
Don't think steel droid 5.6 works with gms (sim card)
Sent from my Amazon Kindle Fire using Tapatalk
sd_shadow said:
Don't think steel droid 5.6 works with gms (sim card)
Sent from my Amazon Kindle Fire using Tapatalk
Click to expand...
Click to collapse
I'm gsm unlocked for straight talk will any roms still work
Little help please
sd_shadow said:
Don't think steel droid 5.6 works with gms (sim card)
Sent from my Amazon Kindle Fire using Tapatalk
Click to expand...
Click to collapse
I'm gsm unlocked for straight talk will roms still work for me
Some of the ROMs that work with gsm have a special version to flash or extra files. Minimoto should work, just use the gsm version in the OP.
Sent from my Amazon Kindle Fire using Tapatalk
Little help please
sd_shadow said:
Don't think steel droid 5.6 works with gms (sim card)
Sent from my Amazon Kindle Fire using Tapatalk
Click to expand...
Click to collapse
What about aokp and if so which gaps do I use
gsm should work with aokp, need to use the gapps that are made for the roms android version.
there is a link to gapps list in my d3 link list.
sd_shadow's [Collection] of Links for: Droid 3 (XT862)
and always verify md5 checksum for rom and gapps, before installing
[How to] Verify that your download is complete with MD5/SHA-1 Hash Checksums
Sent from my XT862 using Tapatalk
sd_shadow said:
Don't think steel droid 5.6 works with gms (sim card)
Sent from my Amazon Kindle Fire using Tapatalk
Click to expand...
Click to collapse
What about aokp and what gapps do I use if so
js1488 said:
Ok thanks for the help are there any roms you could reccomend that actually work properly when you install them? Would be greatly appreciated running stock Motorola droid 3 xt862
Click to expand...
Click to collapse
If you have no need to use D3 (XT862 or XT861) in US where XT883 radio and some extra build.prop modifications are needed...
If you speak English or Polish and have nothing against old good Gingerbread (2.3.6) ...
...you can use cROM rom . Lots of hacks (stock XT861 + deodexed + zipalign + optipng + deblured + deblothed + 220DPIhack with full google store + USBCardFix + init.d + sysctl.d + adaware + seeder + automatic apns + roaming data patch + SIP in system [voip using buildin dialer] + DIALER mod + full screen contacts/dialer Images hack + gpu overclock + tethering + reverse tethering) + great stability + good memory management + better camera apps tolerance.
It's not available on xda because it supports only two languages (EN/PL). Installation and usage guides are in Polish but could be translated
Just ask google about "Droid 3 cROM". It has it's corner at forum.android.com.pl.
It is designed to be used/installed with the Safestrap but it can be used as a main DROID 3 ROM in place of stock rom (Safestrap backup/restore operations are needed to be performed)
Related
Hello,
I just ported cm10 from the razr hd and changed everything to be Atrix HD and AT&T (Dear Bell users, you can still use this rom, it would work just as fine as AT&T )
Disclaimer:
I'm not responsible if this bricks your phone. It was your choice, NOT MINE!!!
Downloads:
CM10.0 1st build: http://d-h.st/FWb
Gapps: http://goo.im/gapps/gapps-jb-20121011-signed.zip
Thanks to the razr qcom dev team!!!
Screenshots:
Coming Soon...
Known bugs:
Camera (of course, because early cm builds usually have camera not working)
Signal bar (data works, just the signal bar doesn't)
Wifi (won't turn on, maybe)
NFC menu (It just needs to be removed, our phones don't have NFC )
Any more just PM me
Installation:
1. Boot into Safestrap Recovery
2. Create rom slot 1 (if you already created it, activate and wipe system and factory reset)
3. Install cm10.0 as first zip and gapps as second zip
The only reason I'm releasing this, is because it will work on a Stock kernel and ramdisk, unlike CM10.1
So basically the only issues are non working camera and WiFi? Any fixes coming?
sent from my JokerMATRIX HD MAXX
deeje00 said:
So basically the only issues are non working camera and WiFi? Any fixes coming?
sent from my JokerMATRIX HD MAXX
Click to expand...
Click to collapse
Yeah,
I just want everybody to get a basic idea.
Yeah, done uploading...
tcf38012 said:
Hello,
I just ported cm10 from the razr hd and changed everything to be Atrix HD and AT&T (Dear Bell users, you can still use this rom, it would work just as fine as AT&T )
Disclaimer:
I'm not responsible if this bricks your phone. It was your choice, NOT MINE!!!
Downloads:
CM10.0 1st build: http://d-h.st/FWb
Gapps: http://goo.im/gapps/gapps-jb-20121011-signed.zip
Thanks to the razr qcom dev team!!!
Screenshots:
Coming Soon...
Known bugs:
Camera (of course, because early cm builds usually have camera not working)
Signal bar (data works, just the signal bar doesn't)
Wifi (won't turn on, maybe)
NFC menu (It just needs to be removed, our phones don't have NFC )
Any more just PM me
Installation:
1. Boot into Safestrap Recovery
2. Create rom slot 1 (if you already created it, activate and wipe system and factory reset)
3. Install cm10.0 as first zip and gapps as second zip
The only reason I'm releasing this, is because it will work on a Stock kernel and ramdisk, unlike CM10.1
Click to expand...
Click to collapse
Looking forward to it fellow dev! :good: Any known bugs? REALLY EXCITED!
Niiiiiiiiice!
Appreciate all the work budd, cheers!
Sent from my MB886 using Tapatalk 2
Abu-7abash said:
Niiiiiiiiice!
Appreciate all the work budd, cheers!
Sent from my MB886 using Tapatalk 2
Click to expand...
Click to collapse
For real though this rom is buttery!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
So yes or no on fixes coming for camera and WiFi? And it says file not found on gapps
sent from my JokerMATRIX HD MAXX
deeje00 said:
So yes or no on fixes coming for camera and WiFi? And it says file not found on gapps
sent from my JokerMATRIX HD MAXX
Click to expand...
Click to collapse
I almost got wifi fixed.
I fixed Nfc to.
just do this with adb shell:
Code:
mount -o rw,remount /system
rm /system/app/Nfc.apk
I'll add that next release
And I fixed the link.
I love that romming is starting to pick up, and i hope he gets his bounty from that other thread. Now its time to fire up linux and root this sucker! thanks again devs! Liked
tcf38012 said:
I almost got wifi fixed.
I fixed Nfc to.
just do this with adb shell:
Code:
mount -o rw,remount /system
rm /system/app/Nfc.apk
I'll add that next release
And I fixed the link.
Click to expand...
Click to collapse
Other than all that stuff. Only issue was extreme battery drain, I plugged my phone in at 19% and with little use (texting) it went down to 1%. My phone has never ever gotten down further than like 14%.
Thought this phone didn't support NFC?
sent from my JokerMATRIX HD MAXX
deeje00 said:
Thought this phone didn't support NFC?
sent from my JokerMATRIX HD MAXX
Click to expand...
Click to collapse
Thats why I removed it.
A random mystery is...
Most AT&T Phones don't have Nfc
Thought you said you added it my bad Lol.
sent from my JokerMATRIX HD MAXX
Damn, you beat me to posting this! I've been running CM10 as my daily for the past 2 weeks (I fixed the wifi & signal strength issues also).
Everything except camera on mine works like a charm. No battery issues whatsoever either. LMT + NavBar delete = full screen awesomeness.
progrockguy said:
Damn, you beat me to posting this! I've been running CM10 as my daily for the past 2 weeks (I fixed the wifi & signal strength issues also).
Everything except camera on mine works like a charm. No battery issues whatsoever either. LMT + NavBar delete = full screen awesomeness.
Click to expand...
Click to collapse
Sorry, since no one's getting paid, could you PM me your fixes, Thanks!!!
Try using the camera and camera related libs from ICS, should work. If not I'll look for a solution but camera should work with ICS libs. And WiFi fix is easy. There's already a method posted somewhere in our forums
Sent from my MB886 using xda app-developers app
EcHoFiiVe said:
Try using the camera and camera related libs from ICS, should work. If not I'll look for a solution but camera should work with ICS libs. And WiFi fix is easy. There's already a method posted somewhere in our forums
Click to expand...
Click to collapse
If it were that easy the razrHD devs would've had the camera working a long time ago. CM10 handles camera stuff differently than stock.
I talked to a couple of them, and I'm not a noon I know this handles differently than stock.
Sent from my MB886 using xda app-developers app
EcHoFiiVe said:
I talked to a couple of them, and I'm not a noon I know this handles differently than stock.
Click to expand...
Click to collapse
Can you post the exact camera files they told you to swap? And what about the qcom_cameraservice (sp?) file -- should that be modified or left alone? All we need is the camera working on this thing!!
I like it so far, but some of the games are pretty laggy ( like temple run 2 )
Sent from my Atrix HD using xda premium
Unlocked Bootloader required. Must flash via CWM or TWRP. Do not use Safestrap.
These ROMs are mostly stable. Expect bugs and occasional instability/crashes. Flash at your own risk.
Instructions
Make a backup beforehand
Wipe Data, Cache, and Format System
Install ROM & GApps
CM10 by Hashcode -- enable USB debugging for MTP
Bugs: lockscreen display artifacting, camera only works in 3MP or 8MP, no BT music
GPS: Settings -> Location Access -> GPS Source -> click Use Internal GPS
ROM: http://d-h.st/RQm
GApps: http://goo.im/gapps/gapps-jb-20121011-signed.zip
OpenPDroid for CM10 -- allows total privacy control over your apps
Patch ZIP: http://forum.xda-developers.com/attachment.php?attachmentid=1891228
PDroid Manager (required): http://forum.xda-developers.com/showthread.php?t=1994860
Undo/Removal ZIP: http://forum.xda-developers.com/attachment.php?attachmentid=1891232
=================================================
Extra: CM10.1 by Hashcode -- no camera; if you want camera, install Epinter's 10.1 for XT926
ROM: http://goo.im/devs/Hashcode/vanquish/cm10.1
GApps: http://goo.im/gapps/gapps-jb-20130301-signed.zip
==================================================
All credit goes to Epinter, Hashcode, dhacker, and especially Dan Rosenberg for the bootloader. Donate to them if you use this!
Dan: http://vulnfactory.org/blog/2013/04/08/motorola-bootloader-unlocking/
Epinter: http://forum.xda-developers.com/donatetome.php?u=3721576
Hashcode, dhacker: http://blog.hash-of-codes.com/
Click "Thanks" for the CM10 upload. You won't find it anywhere else. Enjoy!
Nice, finally development is coming along. Dl now thanks
Sent from my XT926 using Tapatalk 2
do we need to mount system before flashing? also, do we need to wipe system?
forgot to ask in my original post, but do you have the link for gapps?
I flashed the most recent gapps from vitreous. Works fine. The camera is not present for me however :S
Sent from my XT926 using xda app-developers app
sunkim50 said:
forgot to ask in my original post, but do you have the link for gapps?
Click to expand...
Click to collapse
http://goo.im/gapps/
I flashed the cm10 and camera works. The only thing I've found is that when I turn my screen off or lock it, it doesn't really go off. Lines start appearing lightly then they get brighter and brighter... Not sure what's going on. I see cm10.1 was added as a bonus to this post. Does that mean the camera is fixed on cm10.1 also?
Sent from my XT926 using Tapatalk 2
an21281 said:
I flashed the cm10 and camera works. The only thing I've found is that when I turn my screen off or lock it, it doesn't really go off. Lines start appearing lightly then they get brighter and brighter... Not sure what's going on. I see cm10.1 was added as a bonus to this post. Does that mean the camera is fixed on cm10.1 also?
Sent from my XT926 using Tapatalk 2
Click to expand...
Click to collapse
I'll let you know when I flash this...like...NOW
an21281 said:
I flashed the cm10 and camera works. The only thing I've found is that when I turn my screen off or lock it, it doesn't really go off. Lines start appearing lightly then they get brighter and brighter... Not sure what's going on. I see cm10.1 was added as a bonus to this post. Does that mean the camera is fixed on cm10.1 also?
Click to expand...
Click to collapse
That is an odd issue. I'm not experiencing that. Did you install any apps or modifications?
As for 10.1, I just found the file from Hashcode and linked it, so I don't know about the camera. I'm only interested in 10 for now as it's more stable. Give it a shot and let us know.
Camera does not work in 10.1, I flashed it earlier. Everything else seems pretty smooth though.
Yea, I am experiencing the same problem as the guy above. Those lines act as its like a screensaver lol idk. when it disappear, it takes awhile me to unlock the phone. Dbl press power to make sure its off then press power multiple times to turn screen back on. Other then this problem its running like a champ!
Cm 10.1- I had problems with WiFi not turning on, it did work then it just stopped
Can't make work cm10 with gsm. It's only lte/cmda. cm10.1 works fine, but constantly process com.android.phone stops...
I'm installing them over modded deodexed 4.0.4.
Should I install those ROMs over stock 4.1.1?
Sent from my DROID RAZR HD using xda app-developers app
anddep said:
Yea, I am experiencing the same problem as the guy above. Those lines act as its like a screensaver lol idk. when it disappear, it takes awhile me to unlock the phone. Dbl press power to make sure its off then press power multiple times to turn screen back on. Other then this problem its running like a champ!
Cm 10.1- I had problems with WiFi not turning on, it did work then it just stopped
Click to expand...
Click to collapse
Same problem with the lock screen here. works great besides that.
Just changed lock screen clock to center and problem disappeared
Nm still there
Sent from my XT926 using Tapatalk 2
progrockguy said:
Unlocked Bootloader required. Must flash via CWM or TWRP. Do not use Safestrap if you want a working camera.
Install ROM and GApps. Wipe Cache & Factory Reset. Then reboot.
All credit goes to Epinter, Hashcode, and especially Dan Rosenberg for the bootloader. Donate to them if you use this!
Dan: http://vulnfactory.org/blog/2013/04/08/motorola-bootloader-unlocking/
Epinter: http://forum.xda-developers.com/donatetome.php?u=3721576
Hashcode: http://blog.hash-of-codes.com/
Click "Thanks" for this upload. Enjoy!
CM10: http://d-h.st/RQm
GApps: http://goo.im/gapps/gapps-jb-20121011-signed.zip
=================================================
BONUS: CM10.1 by Hashcode:
http://goo.im/devs/Hashcode/vanquish/cm10.1/cm-10.1-20130124-UNOFFICIAL-xt926.zip
Click to expand...
Click to collapse
What's the difference between cm10 and the bonus cm10.1? Sorry if that's a bad question..
Sent from my DROID RAZR HD using Tapatalk 2
I think one is ICS & the other is JB if I remember correctly.
Sent from my DROID RAZR HD using Tapatalk 2
Hashcodes' CM 10.1 is running like a champ other than the camera and video not worker. I believe soon that won't be an issue. I'm using it as a daily and loving it. Can't wait top see more Roms like AOKP and PA
---------- Post added at 10:55 AM ---------- Previous post was at 10:54 AM ----------
rebretz000 said:
I think one is ICS & the other is JB if I remember correctly.
Sent from my DROID RAZR HD using Tapatalk 2
Click to expand...
Click to collapse
They both are JB. 10 is 4.1 while 10.1 is 4.2
I can't get Media audio to play via speaker or Bluetooth. anyone else?
Sent from my XT926 using Tapatalk 2
itsdubai said:
What's the difference between cm10 and the bonus cm10.1? Sorry if that's a bad question..
Sent from my DROID RAZR HD using Tapatalk 2
Click to expand...
Click to collapse
CM10 is JB 4.1.2 and CM10.1 is JB 4.2.2
koftheworld said:
Same problem with the lock screen here. works great besides that.
Just changed lock screen clock to center and problem disappeared
Nm still there
Sent from my XT926 using Tapatalk 2
Click to expand...
Click to collapse
I just changed the clock and my phone still does the same. The lines start to appear slowly in red and get brighter. It's hard to see it immediately daytime but at night you can see it easily. After a minute it's very bright though. I thought it had to do with the notification light since when you set that and try to test it the same thing happened s with screen off but much faster.
I shut off notification light since then and still there also. Never seen this issue before. Either way getting the camera working is a big step! Thanks again
Sent from my XT926 using Tapatalk 2
Looks like the CM10 download site is blocked at work for me, is there a mirror anywhere? Thanks.
Got it downloaded, working real nice so far, very smooth. I do have the lockscreen issue too. This is amazing, so glad to have CM on this phone. Thanks to all.
Ok guys, a few have asked for a stock deodexed rom, so here it is. It is rooted and has SuperSu and the necessary binaries to make it work correctly. Other than that, it is stock from the T210R MG4 firmware.
November updated T210RXARAMK1 version is HERE. This version does not wipe data (only cache and dalvik).
October updated T210RXARAMJ1 version is HERE. This version does not wipe data (only cache and dalvik).
How to install:
1. Download the rom zip from HERE (older MG4 version).
2. Boot into your custom recovery (CWM, Philz Touch or TWRP). Look for those threads in this dev section if you don't have this already.
3. Make a backup of your current rom.
4. Do a Factory Reset, and cache/dalvik cache wipe in recovery.
5. Flash the rom zip.
6. Reboot. Enjoy.
I did not spend a great deal of time running this stock rom, so please report any issues.
IMPORTANT NOTE FOR PHILZ TOUCH RECOVERY USERS: On the "Install Zip" page, scroll down and UN-CHECK the "Don't allow old update-binary" option before trying to install.
Thanks to @Jamison904 (whose update script I used for reference).
To fix the Calculator force close issue, download and flash the attached Calculator_fix.zip.
The Camera and Gallery fix zip located HERE is only required for those who downloaded before 7:30 EST Sept 20.
Bluetooth Fix
If you are experiencing trouble enabling bluetooth, perform the steps below:
Using a file browser on your phone, open the /data/misc/bluethoothhd folder. Make sure you open the "bluetoothhd" folder and not the "bluetooth" one. There should be one folder in that directory. Delete that folder. Then try to turn on bluetooth. It should work.
One More
Thank you very much this is exactly what I need .
Sent from my SGH-T999 using xda app-developers app
Outstanding!
Sent from my SAMSUNG-SGH-I747 using Tapatalk 4
Looks like the camera is force closing, I'll take a look to see if I can figure that out.
EDIT: Got it fixed. Seems it didn't deodex properly. Uploading a flashable fix now to the OP and will re-upload the whole rom soon.
EDIT 2: Link updated with fixed version.
Gallery is closing as well. Using T210
IX_XI said:
Gallery is closing as well. Using T210
Click to expand...
Click to collapse
Thanks for the report. I have created a flashable fix for this. The link is at the bottom of the OP.
EDIT: Link for full rom updated in OP as well with fixed version.
>>>>------;;;;----->
on wich stock firmware is this rom based? are german region settings/system language available?
daSn00p said:
on wich stock firmware is this rom based? are german region settings/system language available?
Click to expand...
Click to collapse
As stated in the OP, it is based on T210R MG4 firmware. T210R is the US version. I do not see German in the language list.
gr8nole said:
As stated in the OP, it is based on T210R MG4 firmware. T210R is the US version. I do not see German in the language list.
Click to expand...
Click to collapse
ah my fault didnt read that.
hmm so i still have to wait until somebody does it with an european/german fw...
Nc work gr8nole hope u can make it bloatfree
Sent from my SM-T210R using xda app-developers app
I'm sorry if this a noob question... since this is a "stock" ROM. Do the factory samsung updates work? In other words when Samsung releases an update, can I update it or will it detect I am using a custom ROM?
AceNJ said:
I'm sorry if this a noob question... since this is a "stock" ROM. Do the factory samsung updates work? In other words when Samsung releases an update, can I update it or will it detect I am using a custom ROM?
Click to expand...
Click to collapse
Probably not going to get any ota updates. But if you did, it most likely wouldn't flash correctly anyway. Most updates like that will check for any modified system files and these are modified (deodexed and root).
Sent from my DROID RAZR MAXX HD
OP updated with new version.
Sent from my DROID RAZR MAXX HD
gr8nole said:
OP updated with new version.
Sent from my DROID RAZR MAXX HD
Click to expand...
Click to collapse
Let you know how it goes - downloading - have to find another another micro-sd card...
Got error could not flash
Sent from my DROID RAZR HD using Tapatalk 2
krazyace35 said:
Got error could not flash
Sent from my DROID RAZR HD using Tapatalk 2
Click to expand...
Click to collapse
What error did you get? Maybe a bad download. MD5 is listed on download page.
gr8nole said:
What error did you get? Maybe a bad download. MD5 is listed on download page.
Click to expand...
Click to collapse
Error while flashing Oct.2013.stock.rooted.drodexed.T210RXARAMJ1
Sent from my DROID RAZR HD using Tapatalk 2
krazyace35 said:
Error while flashing Oct.2013.stock.rooted.drodexed.T210RXARAMJ1
Sent from my DROID RAZR HD using Tapatalk 2
Click to expand...
Click to collapse
md5 match?
The below information is obsolete. Please use the official obake version of CM12 for support on 2013 Droid devices.
A small patch I put together to make the new CM11 Ghost builds work (kinda) on the 2013 Droid Ultra series phones (Mini, Ultra, Maxx). It may also work for other Ghost based ROMs, but I haven't tested this.
So far, it's been lightly tested on the Droid Ultra M (Mini), and Droid Ultra Maxx. No guarantees, but it's been working okay so far for me.
Thanks to @an21281 for testing, and @mainbord for the original Droid Mini bins. Thanks also to the CM team for supporting us without even knowing it. =)
YOU ACCEPT RESPONSIBILITY FOR ALL RISKS BY CHOOSING TO USE THIS PATCH
- If it breaks your phone, you get to keep both halves. If it eats your data, not my problem. Etc, etc.
- If you are lazy or like to take shortcuts, definitely don't use this.
Requirements:
- Unlocked bootloader. Phone should be on newest stock bootloader, radio, etc. (4.4.4 currently)
- Philz recovery for ghost: https://goo.im/devs/philz_touch/CWM_Advanced_Edition/ghost/
- CM11 Ghost: CM11 Ghost
- GApps. I use the PA Nano package: PA Gapps
Instructions:
- Boot to recovery, and wipe data and cache.
- Install CM11 Ghost, then GApps, then the patch
Notes:
- This is done in my free time, and isn't something I plan on supporting. If I have time, I may make updates.
- I'm not actually using CM11 on my phone at the moment, so can't test things currently.
- TWRP for ghost doesn't set the right properties. Go bug them.
- The huge "full" GApps packages can fill up /system and break ****.
Changelog:
0.6 - 4.4 bins
0.8 - 4.4.4 bins
** Please search the forum or Google your question before posting. Thanks! **
Thank you so much!!
Man, i kept trying to figure out how to rewrite the build.prop and change the binaries to be able to flash the ones that switched to the ghost source. I really, really, appreciate this patch. Maybe with the present state of BL unlock and the super cheap price on the maxx we will actually (for once) see a large amount of development for the msm8960dt branch and not just be limited to the ghost builds. thank you for this, again.
Thanks for taking the time to make this patch, everything has been working perfectly so far!
kitcostantino said:
Man, i kept trying to figure out how to rewrite the build.prop and change the binaries to be able to flash the ones that switched to the ghost source. I really, really, appreciate this patch. Maybe with the present state of BL unlock and the super cheap price on the maxx we will actually (for once) see a large amount of development for the msm8960dt branch and not just be limited to the ghost builds. thank you for this, again.
Click to expand...
Click to collapse
Glad to hear it's working for you.
At least as far as the Maxx goes, all the heavy lifting was done by the CM11 folks.
The patch for the maxx is one binary file for the button lights, two simple configs, and a few lines in build.prop.
I'll be curious if the patch works for the plain Ultra.
Rottgrub said:
Glad to hear it's working for you.
At least as far as the Maxx goes, all the heavy lifting was done by the CM11 folks.
The patch for the maxx is one binary file for the button lights, two simple configs, and a few lines in build.prop.
I'll be curious if the patch works for the plain Ultra.
Click to expand...
Click to collapse
Droid mini CM, keys and sound works!
This patch is going to be very useful if Lollipop is going to integrate the best of Motorola. This means I'll be able to flash CM ghost and still have native active display or whatever it is called in the Nexus 6. At that point, the customs ROMs will actually be relevant to the Moto X and Droid Maxx.
Sent from my iPad using Tapatalk
mainbord said:
Droid mini CM, keys and sound works!
Click to expand...
Click to collapse
Great! Thanks for getting the ball rolling! Guessing you figured out the camera problem you were having? (I was guessing maybe a gapps issue with the Google Camera?).
Problem with camera was in 19oct nightly, i installed 21 oct build and it works. Sorry for my english.
mainbord said:
Problem with camera was in 19oct nightly, i installed 21 oct build and it works. Sorry for my english.
Click to expand...
Click to collapse
Your English is fine. Thanks for the warning about that build date.
So when CM has a lollipop build (CM12?), we might be able to use this patch and have the Google version of Active (Ambient) Display? The only thing that keeps me from running CM is lack of a smooth working Active Display. This would be great news!
What happened to half of the pages in this thread
Sent from my XT1080 using Tapatalk
nubia11 said:
What happened to half of the pages in this thread
Sent from my XT1080 using Tapatalk
Click to expand...
Click to collapse
I asked the mods to clean up the off topic posts. The posts removed were requests for information either already contained in the first post, or easily found with a quick Google search. Unfortunately, these sorts of posts contribute nothing to the discussion, and make it hard for readers to find actual data when/if they have problems.
That said, I'm glad people were able to help you out. Have you had any luck getting it working?
No. I'm not sure if I can use twrp ghost on my XT1080.... If so I will try it and let you / others
Sent from my XT1080 using Tapatalk
---------- Post added at 10:45 AM ---------- Previous post was at 10:44 AM ----------
nubia11 said:
No. I'm not sure if I can use twrp ghost on my XT1080.... If so I will try it and let you / others know
Sent from my XT1080 using Tapatalk
Click to expand...
Click to collapse
Sent from my XT1080 using Tapatalk
It isn't working... Here is what I get... "This package is for device xt1056" also... Error executing updater binary in zip/sdcard/cmghost/cm-11 11 20141023-nightly..........and so on. Any ideas?
Sent from my XT1080 using Tapatalk
I'm just wondering if maybe I didn't flash something right. You would think that the patch would go first but I did exactly what was in the op
Sent from my XT1080 using Tapatalk
nubia11 said:
I'm just wondering if maybe I didn't flash something right. You would think that the patch would go first but I did exactly what was in the op
Sent from my XT1080 using Tapatalk
Click to expand...
Click to collapse
Install Philz CWM recovery. Boot to recovery, and wipe data and cache.
Install CM11 Ghost, then GApps, and only then the patch.
Thank you
Sent from my XT1080 using Tapatalk
I'm getting flashing error
aneeshmbabu said:
I'm getting flashing error
Click to expand...
Click to collapse
Make sure you're using Philz recovery.
Sent from my XT1060 using Tapatalk
jakereeves31 said:
Make sure you're using Philz recovery.
Sent from my XT1060 using Tapatalk
Click to expand...
Click to collapse
I'm using twrp , how to flash philz recovery.. I already installed twrp.. Thanks for ur help , step wise help needed for flashing philz recovery.. My model xt1080,droid maxx
What is it?:
A small driver patch to better support running the new Moto X 5.1 stock ROMs on the 2013 Droid Ultra series phones (Mini, Ultra, Maxx). Now also patches the libstagefright vulnerability in these stock ROMs.
What's been tested?:
- Droid Mini, w/ T-Mobile: LTE, 4g, 3g, 2g, calling
- Wireless 2.4ghz, Bluetooth audio and calling.
- Video acceleration, audio, haptic feedback, camera.
- Deep sleep, power management, and wireless charging.
- Normal day to day usage for ~2 weeks now. No crashes, no problems.
YOU ACCEPT RESPONSIBILITY FOR ANY AND ALL REPERCUSSIONS BY CHOOSING TO USE THIS INFORMATION
- If you have ANY doubts about the risks, definitely don't use this.
Knowledge Requirements:
- Read the first post for comprehension before posting.
- Read and understand the instructions before trying to follow them.
- Know how to use mfastboot to flash an FXZ.
Other Requirements: (Do a search before you ask...)
- Droid Ultra series device with unlocked bootloader.
- Stock Moto X 5.1 FXZ (I used xt1053 version).
- Current TWRP for Ghost (I used 2.8.7.0).
Instructions:
1: Unzip the Moto X FXZ to a directory on your computer.
2: *** DELETE "motoboot.img", and "gpt.bin"! DO NOT FLASH THEM!!! ***
THESE TWO FILES CAN PERMANENTLY DAMAGE OR BRICK YOUR DROID!!! DELETE THEM!!!
3: Reboot into bootloader for fastboot.
4: mfastboot flash your boot, logo, system, modem, fsg, and TWRP recovery
5: mfastboot erase modemst1, modemst2, userdata, cache, customize, and clogo
6: Use volume controls to boot directly to recovery. If you boot to OS by accident, you'll need to reflash recovery.
7: Let TWRP make changes to your system image to prevent recovery being overwritten.
8: In TWRP select "Install from adb", and then run "adb sideload Droid-MotoX-5.1_Patch.zip" from your computer.
9: Reboot device, and let TWRP install SuperSU.
Observations:
- First boot can take a long, long, time, and may hang. If it's still booting after 10-15 minutes, give it a reboot (PWR & VOL-).
- Your device will think it's a Moto X after reboot. This is normal.
- I highly recommend disabling the Motorola Update Service. The patch doesn't do this for you.
- No idea if this works with other Moto X stock ROM versions.
Notes:
- This is done in my free time, and isn't something I intend to support.
- Don't PM me directly for help! Ask in the thread.
- If you don't have enough post count to post in DEV, you probably shouldn't use this patch.
Bugs:
- None that I've seen so far.
Changelog:
- Initial release
- Added libstagefright patched libs from this thread.
** Please search the forum or Google your question before posting. Thanks! **
So, just to be clear, this is NOT for Verizon phones?
jaydotelloh said:
So, just to be clear, this is NOT for Verizon phones?
Click to expand...
Click to collapse
For Verizon service you mean? This install should, in theory, support Verizon service, but I haven't tested it.
There is also nothing T-Mobile specific in the patch, so I don't see why it wouldn't "just work" with the Verizon version of the Moto X 5.1 ROM.
I noticed this says maybe work on droid maxx, but what about capacitive buttons or does the xt1053 have them too. Sorry if this is a dumb question. I was thinking about trying it on my maxx. Tired of waiting on the update.
Sent from my XT1080 using XDA Free mobile app
gfrrt said:
I noticed this says maybe work on droid maxx, but what about capacitive buttons or does the xt1053 have them too. Sorry if this is a dumb question. I was thinking about trying it on my maxx. Tired of waiting on the update.
Sent from my XT1080 using XDA Free mobile app
Click to expand...
Click to collapse
All told, this ROM does a decent job of supporting the Droid phones out of the box. This patch basically just does a few things:
1: Activates the hardware buttons, and lights. (app switcher is mapped to menu by default)
2: Disables the software navigation bar.
3: Adds some libraries needed for audio on the Droid Mini.
4: Changes the DPI from 320 to 340 on the Droid Mini (smaller screen).
Cheers!
I will definitely try it out thanks
Sent from my XT1080 using XDA Free mobile app
Rottgrub said:
All told, this ROM does a decent job of supporting the Droid phones out of the box. This patch basically just does a few things:
1: Activates the hardware buttons, and lights. (app switcher is mapped to menu by default)
2: Disables the software navigation bar.
3: Adds some libraries needed for audio on the Droid Mini.
4: Changes the DPI from 320 to 340 on the Droid Mini (smaller screen).
Cheers!
Click to expand...
Click to collapse
Works good.
But i would add the correct keylayout (with app switch) -> https://github.com/CyanogenMod/andr...e/blob/cm-12.1/keylayout/synaptics_dsx_i2c.kl and modify the build.prop to get the correct model & name.
Seems that this rom has no cell standby power drain (like all cm12 versions).
OK, so for Verizon service, one would get the VZW Moto X 5.1 FXZ and follow the same steps (anyone have a link)? Has anyone tried this out yet? I'd love to give it a go but have been out of the flashing game for a while now.
notz76 said:
Works good.
But i would add the correct keylayout (with app switch) -> https://github.com/CyanogenMod/andr...e/blob/cm-12.1/keylayout/synaptics_dsx_i2c.kl and modify the build.prop to get the correct model & name.
Seems that this rom has no cell standby power drain (like all cm12 versions).
Click to expand...
Click to collapse
Yeah, this was a tough call. I set the button to menu since there are unfortunately apps which won't properly expose their on screen menu with the Moto X framework. As you point out, it's easy enough to change. My workaround is to set long press menu to "app-switcher" in Apex Launcher. You can also install an Xposed module which will give long press functionality for the best of both worlds.
And yeah, I concur. I haven't had any of the power drain issues, or call crashing issues I had with CM12. It's proving to be pretty stable thus far.
jaydotelloh said:
OK, so for Verizon service, one would get the VZW Moto X 5.1 FXZ and follow the same steps (anyone have a link)? Has anyone tried this out yet? I'd love to give it a go but have been out of the flashing game for a while now.
Click to expand...
Click to collapse
I don't think Verizon has actually released their Moto X 5.1 FXZ as of yet. You could always try it with instructions above and let us know how it works for you.
notz76 said:
Works good.
Click to expand...
Click to collapse
Quick questions: What carrier are you testing this with, and on which phone?
Rottgrub said:
Quick questions: What carrier are you testing this with, and on which phone?
Click to expand...
Click to collapse
Droid Mini -> T-Mobile in Austria (no 4G possible due different frequency)
Where can I find stock moto 5.1 fxz xt1053 to flash. Do you happen to have a link?
Sent from my XT1080 using XDA Free mobile app
gfrrt said:
Where can I find stock moto 5.1 fxz xt1053 to flash. Do you happen to have a link?
Sent from my XT1080 using XDA Free mobile app
Click to expand...
Click to collapse
http://forum.xda-developers.com/moto-x/general/official-collection-firmwares-fxz-sbf-t3146628
Thank you. going to try this on my maxx
Sent from my XT1080 using XDA Free mobile app
How exactly do you change the Menu back to App Switch?
Yachter99 said:
How exactly do you change the Menu back to App Switch?
Click to expand...
Click to collapse
Replace this file /usr/keylaout/synaptics_dsx_i2c.kl in zip (and flash it again) or on your file system with this one: https://github.com/CyanogenMod/andr...e/blob/cm-12.1/keylayout/synaptics_dsx_i2c.kl
Hm... It`s also works fine with AOSP 5.1.1 ROMs for Moto X and... even 4.4.4 stock ROMs for Moto X..
P.S. I just flashed it with TWRP 2.8.7.0 (just install - without ADB) before and after flashing ROMs )
Hello users. Can someone please upload some decent screenshots of this Moto X Firmware?
My brother has a Droid Ultra XT1080. I wanna ugrade his to Lollipop as Verizon hasn't been able to deliver an OTA.
But he loves all the Moto Apps like Moto Display, so are those working in this?
Dom3616 said:
Hello users. Can someone please upload some decent screenshots of this Moto X Firmware?
My brother has a Droid Ultra XT1080. I wanna ugrade his to Lollipop as Verizon hasn't been able to deliver an OTA.
But he loves all the Moto Apps like Moto Display, so are those working in this?
Click to expand...
Click to collapse
It`s only MOD for install Moto X ROMs - if you want to see ROMs - go to Moto X thread and look to it ))
P.S. You can use this MOD only if you have unlocked BL