Hi sorry cuz im new to this forum but i recently rooted my Samsung galaxy tab 8.9 gtp7310 and flashed a rom with odin but got the firmware upgrade encountered an issue so i downloaded the p7310 4.0.4 firmware from SamMobile to fix this but cant find any gapps for it
I flashed a custom rom because i taught i would fix my broken tab
(stuck at Samsung splash screen when you try to boot it after factory reset)
ANONYMOUS010187 said:
Hi sorry cuz im new to this forum but i recently rooted my Samsung galaxy tab 8.9 gtp7310 and flashed a rom with odin but got the firmware upgrade encountered an issue so i downloaded the p7310 4.0.4 firmware from SamMobile to fix this but cant find any gapps for it
I flashed a custom rom because i taught i would fix my broken tab
(stuck at Samsung splash screen when you try to boot it after factory reset)
Click to expand...
Click to collapse
First of all, welcome to the forum, I hope you enjoy our little team here,
now, about gapps, you don't have to find any gapps for stock ROM, they are already included in it,
so just flash the p7310 4.0.4 firmware from SamMobile you downloaded, through odin and you'll get everything you need
Related
does anyone know which of these custom ROMs is for P1000N? it seems to me that every ROMs i installed were not compatible with my device. Thanks
None of these ROM's is actually usable on the N or L models, the only "mod" that can be used is this OC Kernel
http://forum.xda-developers.com/showthread.php?t=974408
Sorry I have only a P1000T model. I wish I can help you.
is there an original firmware for this P1000N then? I tried to update it through Kies but it wont let me update. and if I update it through ODIN, will Kies let me do the update in the future?
Thanks all
Jorge787 said:
None of these ROM's is actually usable on the N or L models, the only "mod" that can be used is this OC Kernel
http://forum.xda-developers.com/showthread.php?t=974408
Click to expand...
Click to collapse
Thanks, Jorge. but when i tried to flash this kernel, my tab got stuck at the Samsung screen and kept vibrating. I had to flash it back to Roto-JMI-Full-v2 before I can reflash it to the P1000NUBJM2 firmware downloaded from Samfirmware. Any ideas?
traiviet said:
Thanks, Jorge. but when i tried to flash this kernel, my tab got stuck at the Samsung screen and kept vibrating. I had to flash it back to Roto-JMI-Full-v2 before I can reflash it to the P1000NUBJM2 firmware downloaded from Samfirmware. Any ideas?
Click to expand...
Click to collapse
try dbdata
G-P1000N Update
I tried Updating My GTp1000N using ODIN and the root files...that is: gt-p1000_mr.pit, dbdata.tar and Cf root. But my tab restarted and got stuck in the language selection screen... what do i need to do to restore my tab...
put tab in recovery (power, volume up) and restore the original rom
My problem is that i flash my tab but, when it boots the os, vibrates once, and then three times (like an app crash, i think)
I change the kernel, then the rom. THEN, i wanted to go back to stock and flashed stock over the other kernel, and other rom.
Now i turn it on, and hangs on the samsung screen, and gives app error.
Right now, i'm downloading the previous rom, 'cause i think i have to flash that rom and then use heimdall to flash the stock kernel.
Any ideas ?
KERNEL: HumberOS 05052011
ROM: HumberOS 1.2.5 i think
SGT P1000L
I just want to flash cf root to flash overcome
Thanks in advance !
Overcome kernel isnt compatible with latin tabs. Get a stock rom for your tab and flash it with repartition. Basically follow instructions on flashing that stock rom. Make sure your tab is fully charged.
check this thread , http://forum.xda-developers.com/showthread.php?t=1133590
THANKS !
DarkPal: Yes ! you are right ! But i never flash that kernel ! I've flashed HumberOS Kernel, wich is compatible with my tab model.
I just refered Overcome 'cause the same developer of HumberOS ported CF Root Kernel (Gingerbread) to P1000L and N, and he tried Overcome and CM7 and he get them runnin' on a latin tab.
I've flashed my tab one, two, three times with repartition. But it's still getting app crash when it boot the OS.
:/
k0sh: I read your guide before posting here, my friend. That's why i know that my tab is only Soft bricked. But i have flashed my tab (with ODIN and the stock ROM for my tab model) a thousand times. I don't work.
Both: Well, the previous ROM (HumberOS 1.2.5 it's a .zip for Cw... if i only can flash a kernel with Cw...)
Maybe i'm just give a try to Heimdall.
Thanks !
Solved
I just flash a stock 2.3 ROM and my tab boots finally (ona complete week turned off D, then CF-root, and now i'm flashing Overcome Hermes... just waiting the initial boot !!!!!!
Thanks a lot !!!!!
Hello guys & girls
I just sold my Galaxy Note, and since it was rooted (Alliance Rom - JB), I had to reflash stock Rom. The newest firmware for Nordic countries is ICS 4.0.3. I flashed with Odin and every thing seemed OK except the phone is stuck at Samsung logo when it restarts. I tried flashing ICS 4.0.2 and still the same problem.
What should I do to get it to work??
Ismo29 said:
Hello guys & girls
I just sold my Galaxy Note, and since it was rooted (Alliance Rom - JB), I had to reflash stock Rom. The newest firmware for Nordic countries is ICS 4.0.3. I flashed with Odin and every thing seemed OK except the phone is stuck at Samsung logo when it restarts. I tried flashing ICS 4.0.2 and still the same problem.
What should I do to get it to work??
Click to expand...
Click to collapse
How did you flash and did you wipe your N7000 when on 4.0.4 or 4.0.3?
Ismo29 said:
Hello guys & girls
I just sold my Galaxy Note, and since it was rooted (Alliance Rom - JB), I had to reflash stock Rom. The newest firmware for Nordic countries is ICS 4.0.3. I flashed with Odin and every thing seemed OK except the phone is stuck at Samsung logo when it restarts. I tried flashing ICS 4.0.2 and still the same problem.
What should I do to get it to work??
Click to expand...
Click to collapse
I don't know which ROM you have flashed exactly, but it might have been a non-wipe one. Try to flash the Gingerbread LC1 one (which is wipe) through Odin PC. Don't wipe anything from the existing ICS recovery.
Hi there.
I'm new here so I'm not too sure if this is the right spot to put this but do mind my noobness.
I have a Samsung Ace GT-S5830, obviously, that is in need of the official Gingerbread 2.3.6 Australian firmware. I can no longer download the firmware due to hotfile.com being shutdown. I would install one of the mods from here but I do like the standard UI to each version of the Android firmware. I have tried looking on Google by searching S5830XWKT7_S5830OPPKS6_OPP.zip but no luck as they all lead to the old dead hotfile.com link. But if anyone has a .ZIP copy of it that they could link me then that would be great or PM me a link or PM me to send it in an e-mail, whatever it takes. I need this firmware ASAP as I have a friend that want to buy the phone off me soon and I want to make sure it works perfectly as it's not doing to well.
So, please. Anyone.
Cheers!
Bigdanzo said:
Hi there.
I'm new here so I'm not too sure if this is the right spot to put this but do mind my noobness.
I have a Samsung Ace GT-S5830, obviously, that is in need of the official Gingerbread 2.3.6 Australian firmware. I can no longer download the firmware due to hotfile.com being shutdown. I would install one of the mods from here but I do like the standard UI to each version of the Android firmware. I have tried looking on Google by searching S5830XWKT7_S5830OPPKS6_OPP.zip but no luck as they all lead to the old dead hotfile.com link. But if anyone has a .ZIP copy of it that they could link me then that would be great or PM me a link or PM me to send it in an e-mail, whatever it takes. I need this firmware ASAP as I have a friend that want to buy the phone off me soon and I want to make sure it works perfectly as it's not doing to well.
So, please. Anyone.
Cheers!
Click to expand...
Click to collapse
Well you are in luck buddy! Here is the link on how to install stock rom using odin along with all firmwares (including Australian). Go to "Preparation" section to download all the files needed for flashing and "Some Firmware" section to download the necessary firmware. You can use the mirror link next to the Australian firmware to download fast. Follow this link,
Flash stock rom on Samsung Galaxy Ace S5830 using odin
Once installed, go to recoverymod (hold Power + Home button) and do a wipe data/ factory reset & wipe cache (otherwise bootloop might occur). Then restart. Now you have successfully flashed the stock rom. Here is the link for rooting and installing CWM 5 on Samsung Galaxy Ace,
How To Root and Unroot Samsung Galaxy Ace?
CWM 5.0.2.6 fix for Samsung Galaxy Ace S5830
Hope I Helped
mahithm said:
Well you are in luck buddy! Here is the link on how to install stock rom using odin along with all firmwares (including Australian). Go to "Preparation" section to download all the files needed for flashing and "Some Firmware" section to download the necessary firmware. You can use the mirror link next to the Australian firmware to download fast. Follow this link,
Flash stock rom on Samsung Galaxy Ace S5830 using odin
Once installed, go to recoverymod (hold Power + Home button) and do a wipe data/ factory reset & wipe cache (otherwise bootloop might occur). Then restart. Now you have successfully flashed the stock rom. Here is the link for rooting and installing CWM 5 on Samsung Galaxy Ace,
How To Root and Unroot Samsung Galaxy Ace?
CWM 5.0.2.6 fix for Samsung Galaxy Ace S5830
Hope I Helped
Click to expand...
Click to collapse
This exactly what I needed. Thank you so much, I'm actually glad I came here asking for help.
But thanks you like a thousand times, this a huge help!
Bigdanzo said:
This exactly what I needed. Thank you so much, I'm actually glad I came here asking for help.
But thanks you like a thousand times, this a huge help!
Click to expand...
Click to collapse
Glad I could help buddy
Hi,
i have samsung galaxy tab gt-p1000 with android 2.2,
i saw on youtube: "How to update Galaxy Tab P1000 to 2.3.6 Gingerbread" (in order to finaly update it to 4.4)
after i run the ODIN with the PIT and PDA file, the process ended successfully but the galaxy stuck in samsung logo after reboot.
What can i do ? how do i first make it load again ? and how can i update it to android 4.4 ?
i neve root it or something, the first action i took is the one described above.
PLEASE HELP (+:
Thanks
Did you remember to wipe data and cache from recovery after installing with Odin?
If that doesn't work, have you tried to return to Froyo and see if it boots?
If you have a sdcard,
Put cm9 based thing in it, flash cf root with cwm(by Odin)
Then you can go recovery.
Flash cm9 first and you can go any ROM.
Don't forget to wipe!