Related
my i9000 got stuck in galaxy gt i90000 logo....
how to boot it again with diferent rom.......
it can get in to downloade mode......
need help and steps to flash a rom i am from india ........
You can find instructions on www.samfirmware.com. Just go to the rom download page. You will need to create an account first.
Anyway, it's quite straight forward. Open Odin, plug your phone into your PC with download mode on. Put the pit file in pit, the pda file in pda, phone in phone and csc in csc. (Some roms only have a single file instead of 3. That means the phone and csc is combined with pda, so just put that in pda). Leave partition unchecked. Flash.
snapper.fishes said:
You can find instructions on www.samfirmware.com. Just go to the rom download page. You will need to create an account first.
Anyway, it's quite straight forward. Open Odin, plug your phone into your PC with download mode on. Put the pit file in pit, the pda file in pda, phone in phone and csc in csc. (Some roms only have a single file instead of 3. That means the phone and csc is combined with pda, so just put that in pda). Leave partition unchecked. Flash.
Click to expand...
Click to collapse
actualy i tried to flash this stock firmware I9000DXJPE
after this only it got stuck ther..........
all the steps u told where done
but i will try the site you told thanks for the responce dude............
snapper.fishes said:
You can find instructions on www.samfirmware.com. Just go to the rom download page. You will need to create an account first.
Anyway, it's quite straight forward. Open Odin, plug your phone into your PC with download mode on. Put the pit file in pit, the pda file in pda, phone in phone and csc in csc. (Some roms only have a single file instead of 3. That means the phone and csc is combined with pda, so just put that in pda). Leave partition unchecked. Flash.
Click to expand...
Click to collapse
done it still the same pls help..................................
you must be doing something wrong... if download mode works then it should be able to flash a ROM. try this http://forum.xda-developers.com/showthread.php?p=10860237
I would like to know how to flash UGJL2 modem on top of I9000XXJPY, using Odin or Heimdall.
Thanks in advance
flash it with CWM, mutch reliable.
i always use the odin,it is easy to use,first you should connect your sgs to pc,and download the rom,after that open odin,and you should choose pit,pda（the rom) file
i always use the odin,it is easy to use,first you should connect your sgs to pc,and download the rom,after that open odin,and you should choose pit,pda（the rom) file
PDA thats a Rom not a modem and does not need pit either .
jje
-download an official rom from http://www.samfirmware.com/, extract
-start Odin.
-Select "phone" and fetch the modem.bin file.
-Only thing checked should be "Auto Reboot"
-Put phone in download mode
-Plug in USB
-hit Start
Let it reboot and thou shalt have signal
I followed these steps, but Odin seems to get stuck, progress bar reach the end but then nothing happens, I left the phone plugged in by 5 minutes, I don't think it should take that long, don't know what I am missing, thanks.
Does flashing a MODEM only with Odin wipe anything from the phone or will it leave everything intact?
Thanks
szqnl said:
Does flashing a MODEM only with Odin wipe anything from the phone or will it leave everything intact?
Thanks
Click to expand...
Click to collapse
Changed the modem in custom rom from XXJPY to DXJPB (I live in Singapore) and everything is intact so didn't lose apps, data, or settings
Am also looking to flash my modem but a general question to the group which might be off-topic but do you guys see noticeable difference with different modems (battery life, performance, call quality)? Am in a similar position to szqnl and live in Singapore so thinking about doing the same thing and wondering how much of difference it will be.
What's the difference between Odin and Heimdall?
I just downloaded a modem in .zip format should I extract the .bin from zip in order to flash it in odin ?
adrianmak said:
I just downloaded a modem in .zip format should I extract the .bin from zip in order to flash it in odin ?
Click to expand...
Click to collapse
install zip with cwm
adrianmak said:
I just downloaded a modem in .zip format should I extract the .bin from zip in order to flash it in odin ?
Click to expand...
Click to collapse
where do u download modem file in zip?? need find my country modem for s3 mini in zip file instead of downloading whole firmware . .
pikachu01 said:
What's the difference between Odin and Heimdall?
Click to expand...
Click to collapse
Heimdall has a big horn that can be heard everywhere and likes to lay around and party while looking out for Armageddon. Odin is more of a warrior and has a spear called Gungnir that was made by a team of master dwarf smiths and could strike any target in his field of view.
michaelmotes said:
Heimdall has a big horn that can be heard everywhere and likes to lay around and party while looking out for Armageddon. Odin is more of a warrior and has a spear called Gungnir that was made by a team of master dwarf smiths and could strike any target in his field of view.
Click to expand...
Click to collapse
Way to necro the thread.
Sent from my C6603 using Tapatalk now Free
HELP
ok this probs isnt the right place to ask but, on my gt-i8190n i antecedently flashed a gt-i9505 modem and now the only thing i can do is go into download mode, when i try any other mode its a stactic looking filled screen, can anyone help me please
shadzz23 said:
ok this probs isnt the right place to ask but, on my gt-i8190n i antecedently flashed a gt-i9505 modem and now the only thing i can do is go into download mode, when i try any other mode its a stactic looking filled screen, can anyone help me please
Click to expand...
Click to collapse
You have posted in wrong thread, for i9000.....
Download mode: good!
Flash with Odin or Heimdall only modem for your phone. Extract it from your last used stock rom, compress to .tar file (in Linux native, in Windows use 7-zip) and choose under PDA in Odin.
Alternatively, you can flash a whole stock image, but it will wipe all your data. Use Odin 3.04 or 3.07 and run it as administrator.
tetakpatalked from Nexus 7 flo
Thanks m8 helped alot
tetakpatak said:
You have posted in wrong thread, for i9000.....
Download mode: good!
Flash with Odin or Heimdall only modem for your phone. Extract it from your last used stock rom, compress to .tar file (in Linux native, in Windows use 7-zip) and choose under PDA in Odin.
Alternatively, you can flash a whole stock image, but it will wipe all your data. Use Odin 3.04 or 3.07 and run it as administrator.
tetakpatalked from Nexus 7 flo
Click to expand...
Click to collapse
really helped me my friend, i felt lost for a while
Much simpler and easier by just flashing it in recovery
pryerlee said:
Much simpler and easier by just flashing it in recovery
Click to expand...
Click to collapse
Can you please post a link to the thread where the flashable zips of the basebands are possible to find?
tetakpatalked from Nexus 7 flo
Sorry guys for being a noob.
Story is my tab is rooted and flashed with the OVERCOME RC 2.0 GOLD rom from following alterbridge's thread procedures. Beautiful rom, no complaints.
However the screen has been acting up lately with the finger held down and screen shaking issue.
Ive searched and searched and have concluded its a hardware problem.
I need to flash back to stock for warranty.
For being the noob I am, I've downloaded the stock files....but I don't know how to flash it back.
Attached is a picture of a .zip file of the files inside the zip. Do I use ODIN to flash back? What are the procedures? What file is associated with which box in ODIN? Sorry I just don't have a clue. Or do just throw this into my tab's SD memory and update from CWM recovery mode?...
Do I use superoneclick to unrooted after back to stock rom?
I just don't want to brick my tab...Thanks for any help...
The stock ROM should be a 2.2 FROYO, and the ROM I'm on right now is on Gingerbread...if this makes any difference...
Use this guide first flash with odin it tells you how to flash with odin at the bottom http://forum.xda-developers.com/showthread.php?t=894763
and after flash whatever froyo rom you want make sure you got the one that shipped with your device if its going back for warrenty again flash with odin and your done.
Edit dont forget the thanks button if this hellped you .
Thanks for the link.
So i have the .pit file for the PIT section.
No need for phone and csc section i assume.
But for PDA section i dont have any files available? From my attached picture. i only have a data.tar.gz file. Im not sure what that file is? do i just rename it to .tar??? please help
Sorry not sure on them files i think you can use heidmal with those files do a search on here for that
Anyone???
What do I use? ODIN? HEIMDALL? I need help please.
From overcome gold you will have to re-stock to froyo. Which means a repartiton with pit file + phone + modem files. You will need odin for this.
I would suggest flash back to a safe froyo rom first - as per jutleys link above. Then flash back to your original firmware version.
From the pic above looks like you have unzipped the full.zip. For Odin You need the full zip in the pda section, modem zip in the modem and the pit file in the pit section. Download full zips from roto's link above.
Then check out roto backup thread (shows how to restore using heimdall / odin). As i havent flashed back to my original firmware yet, someone else could advise better. I am assuming for stock purposes you need to put the original stock firmware zip into pda section of odin and leave everything blank and then flash away.
Cheers
ezynow said:
From overcome gold you will have to re-stock to froyo. Which means a repartiton with pit file + phone + modem files. You will need odin for this.
I would suggest flash back to a safe froyo rom first - as per jutleys link above. Then flash back to your original firmware version.
From the pic above looks like you have unzipped the full.zip. For Odin You need the full zip in the pda section, modem zip in the modem and the pit file in the pit section. Download full zips from link above.
Then check out roto backup thread (shows how to restore using heimdall / odin). As i havent flashed back to my original firmware yet, someone else could advise better. I am assuming for stock purposes you need to put the full firmware zip into pda section of odin and leave everything blank and then flash away.
Cheers
Click to expand...
Click to collapse
Thank you for your response. I'll work on getting back safely to a froyo rom.
As for the picture, it is a pic of the content inside the full zip already. Should i unzip and enter modem and pit according? But what goes into the pda section?
chris28j said:
Thank you for your response. I'll work on getting back safely to a froyo rom.
As for the picture, it is a pic of the content inside the full zip already. Should i unzip and enter modem and pit according? But what goes into the pda section?
Click to expand...
Click to collapse
That pic is from a firmware from samfirmware? It has the bootloaders in it so be very careful as flashing bootloaders can cause bricks or be protected ones. As i said before, i think you flash the full zip in the pda section and leave the rest blank i.e no need to unzip.
But do so only after flashing using roto safe froyo rom.
As for the files above, It might be wise to take out the bootloaders then rezip & flash but i would wait on someone with a bit more knowledge just to confirm this.
As long as they are the original files for your firmware, you should be ok.
Thanks for your help ezynow.
UPDATE: I've successfully downgraded from Overcome Gingerbread to Overcome Froyo now.
Now it's just a matter of getting my head wrapped around this stock ROM right. The order, and where the files should go.
Anyone else would like to share their insight? This is the file I downloaded, and this is how it is presented to me. I just need someone to help me sort out what is what.
Thanks.
UPDATE #2: Tried re-zipping and converting to tar file. ODIN failed. Re-zipped into tar again without the data.tar.gz file because I don't know what it is, and failed again.
I don't know what to do anymore. How do I get this to work?
bump
anyone?
UPDATE #3: Tried loading the whole .zip file from CWM. No luck.
Who's your service provider?
I sugest look for another stock rom here that is in the correct format i am sure i seen a post showing all stock roms somewhere use odin
Link deleted. It mentions to use pit file + full zip in pda section . Then says out of date.
Also did you check rotobbackup method thread - use heimdall and flash individual files from your extraced zip files. Assuming you can avoid flashing bootloaders you should only be a soft-brick if anything goes wrong and download mode still available.
Forget about using cwm for anything stock related.
Sum1 who has reverted back to stock surely can help out here!
p.s what was your original firmware version?
I have succesfuly downgraded from gb overcome gold to arabic froyo using the file from samfirmware. First try resulted in stuck at samsung logo but I was expecting that due to the ext4 partition. A cache wipe and factory reset in recovery solved that problem. Also I observed when going to recovery that there were errors in red that are coming out complaining of access problem to certain files. Since I am able to boot I then proceded to format the internal sd. After that I again flashed using the same arabic fw. No problems so far even kies sees my fw as the latest.
Here is the procedure I followed-change the files according to your fw version
noxxious said:
Flash with Odin3 v1.7
1. Download P1000DXKM3 from here. P1000DXKM3
1. Backup your data.
2. Extract the firmware files from the P1000DXKM3.7z file.
3. select P1_add_hidden.pit for .pit file.
4. check repartition.
5. select AP_P1000DXKM3-REV03-ALL-CL874291.tar.md5 for PDA.
6. select CP_MODEM_P1000DXKM1_REV_00_CL873880.tar.md5 for PHONE.
7. select CSC_P1000OLBKM2-MULTI-CL878295.tar.md5 for CSC.
8. Flash your tab and wait for it to restart.
9. Welcome back to stock.
extra steps
10. Root by using SuperOneClick v1.9.1 by CLShortFuse.
11. Unsign Bootloaders by using this SGT-Bootloader-Patch by chainfire and rotohammer.
Click to expand...
Click to collapse
Sent from my GT-P1000 using Tapatalk
Thanks a lot for the help guys.
I will try going to another stock firmware later this afternoon.
However, the firmware I really need is P1000MUGJJ7 (Bell's stock firmware).
The files I have in hand are apparently the files for this firmware, but how to restore it, I have zero clue. These we're sent to me by a member on this forum.
I think the member said that these were created from roto backup.
I have looked everywhere else for this firmware version but it's NOWHERE. Neither does samfirmware.com
So to sum it up, pretty much these are my only sources to play with, and just gotta make it work...
Please help and thanks again.
anyone?
bump
What are the contents of this bell fw? have you tried opening the file?
bongski55 said:
What are the contents of this bell fw? have you tried opening the file?
Click to expand...
Click to collapse
Please refer to the attached picture.
It's a pic of the contents inside the .zip file I was given.
Now I just need a solution as to HOW to use them.
Only the pit.pit file can be used.extract it and in odin load it under pit. then under pda load the whole tar file. then check repartition ,reboot and time.....start...
bongski55 said:
Only the pit.pit file can be used.extract it and in odin load it under pit. then under pda load the whole tar file. then check repartition ,reboot and time.....start...
Click to expand...
Click to collapse
OK. So you are suggesting I take out pit file then CONVERT in someway the whole .zip file into .tar file for the PDA section, am I correct?
Now, I need a proper way to convert this file because I tried this using a converter I downloaded online. And after the conversion, the .tar files was double the size (over 400mb, original ~200mb). And flashing through ODIN using this new file didn't work. So what's the proper way to convert?
After installing the lastest "S.U.R.F.A.C.E" ROM on my GT-I9000 I'm presented with the Galaxy S logo and nothing else,
Tried and tried vol up + home + power number of times now with no avail.
Everything was working fine before was able to boot into clockwork recovery ect, unfortunately I do not have a usb cable so can't try odin any help would be great.
Grab yourself a jig from ebay or the likes, or make one
http://forum.xda-developers.com/showthread.php?t=819551
It will boot into download fine the problem I have is it won't boot into recovery is there any way I can wipe it or does it look like I am in need of a cable?
Then reflash back to stock using Odin
What were you flashing from as surface is an oxeded rom, not dexeded.
buttwad said:
What were you flashing from as surface is an oxeded rom, not dexeded.
Click to expand...
Click to collapse
clockwork recovery, i take it I messed up here so
No, meant what rom were you on before your flash? Stock?
oh sorry got the phone of a friend looked like a custom samsung rom, build version was easyprojectv2 if that rings any bells?
Looks like the problem was caused by trying to flash a odexed rom over a deodexed rom, or not having the correct bootloaders for the new rom. Normally before a flash I would return to stock (firmware from sammobiles.com) first via ODIN, do all the wipes, flash a kernel so you have a nice clean install to 'abuse'. Then I would add any custom rom from there be it by ODIN or by cwm.
Grab yourself a usb lead, nice clean flash and start again.
Ok so I've 3 file here:
APBOOT_I9000XWJW1_CL788890_REV03_user_low_ship.tar.md5
CODE_I9000XWJW1_CL788890_REV03_user_low_ship.tar.md5
KERNEL_I9000XWJW1_CL788890_REV03_user_low_ship.tar.md5
s1_odin_20100803.pit (not sure if i need this as was in the root of the odin folder not the firmware?)
Where do the other 3 file go PDA PHONE CSC???
I am also stuck on the same front, i donwloaded rom from samfirmware but it only had PDA part and nothing else, please suggest which official rom should i download??
stevek93 said:
Ok so I've 3 file here:
APBOOT_I9000XWJW1_CL788890_REV03_user_low_ship.tar.md5
CODE_I9000XWJW1_CL788890_REV03_user_low_ship.tar.md5
KERNEL_I9000XWJW1_CL788890_REV03_user_low_ship.tar.md5
s1_odin_20100803.pit (not sure if i need this as was in the root of the odin folder not the firmware?)
Where do the other 3 file go PDA PHONE CSC???
Click to expand...
Click to collapse
I would go this way mate, first grab JVT from sammobiles.com ( register first)
Flash that using ODIN
Comes with 3 files, CSC, PHONE and PDA
PDA file goes to PDA in ODIN
PHONE goes into MODEM in ODIN
CSC goes in CSC in ODIN.
Also select PIT file, should be 512 on the PIT section on ODIN, hit start and it will flash then reboot.
Then open ODIN again, connect phone and flash your KERNEL to the PDA section of ODIN.
Then grab this http://forum.xda-developers.com/showthread.php?t=1117579
and flash using cwm.
Your then on JW1 all rooted and ready to play.
put the "APBOOT_I9000XWJW1_CL788890_REV03_user_low_ship.tar" file into the PDA and flashed it. Everything seems to be working fine might stick with the stock for a while never really needed to be rooted.
ok i just popped the SIM and have no network access when i tap on Mobile Networks in the setting it tells me to insert a SIM????
the firmware i had was wrong didnt have a modem. Downloaded a jvt as buttwad said flashed an now everything working perfect now. cheers mate!
Long story but I need to downgrade my i9000 from CM10 (currently on c-rom bean v2.3) back to stock 2.3.6 and couldnt find anything specific to the i9000 on to how to do it. Can I just get the stock firmware (ie PDA, CSC, Phone) and then flash through Odin? But I read on XDA (http://forum.xda-developers.com/showthread.php?t=1729458) that I may also need PIT and Bootloader? If so, where can I download these files??? Any help greatly appreciated!!!!
blion said:
Long story but I need to downgrade my i9000 from CM10 (currently on c-rom bean v2.3) back to stock 2.3.6 and couldnt find anything specific to the i9000 on to how to do it. Can I just get the stock firmware (ie PDA, CSC, Phone) and then flash through Odin? But I read on XDA (http://forum.xda-developers.com/showthread.php?t=1729458) that I may also need PIT and Bootloader? If so, where can I download these files??? Any help greatly appreciated!!!!
Click to expand...
Click to collapse
You have to download any 3 files stock ROM (I suggest you JVS, as JW versions can damage your IMEI), then select PDA, CSC and Phone
in ODIN. You don't have to have bootloader, as it is already in PDA, and yes, you have to have PIT file, it is usually within archive with ROM.
Just flash it and you're done. For download go to this thread: http://forum.xda-developers.com/showthread.php?t=1837223 and you'll find
there any ROM you want. Hope it will help you.
--
Leszek
twinsen.net said:
You have to download any 3 files stock ROM (I suggest you JVS, as JW versions can damage your IMEI), then select PDA, CSC and Phone
in ODIN. You don't have to have bootloader, as it is already in PDA, and yes, you have to have PIT file, it is usually within archive with ROM.
Just flash it and you're done. For download go to this thread: http://forum.xda-developers.com/showthread.php?t=1837223 and you'll find
there any ROM you want. Hope it will help you.
--
Leszek
Click to expand...
Click to collapse
Thanks for your prompt response. I am looking to go back to stock GB and last time I downloaded them from here (http://forum.xda-developers.com/showthread.php?t=1102881&page=1). I chose XWJW8/XWJW1/VAUJV9/Sbl (CSC: VAU (Vodafone)) as I live in Australia and my provider is Vodafone. But how do I extract the PIT file??
Also out of curiosity, what if I chose the stock rom of another network provider? Does it make a difference??
blion said:
But how do I extract the PIT file??
Also out of curiosity, what if I chose the stock rom of another network provider? Does it make a difference??
Click to expand...
Click to collapse
you cannot extract a PIT File, you can download a 512 PIT file from My Android Collections
If you use telstra , it will not work for vodafone and vice versa as they are branded
(Do remember to backup your contacts, data, images etc and also your EFS folder before flashing a ROM and make sure you have more than 50% battery charge before you attempt any sort of flashing.)
xsenman said:
you cannot extract a PIT File, you can download a 512 PIT file from My Android Collections
If you use telstra , it will not work for vodafone and vice versa as they are branded
(Do remember to backup your contacts, data, images etc and also your EFS folder before flashing a ROM and make sure you have more than 50% battery charge before you attempt any sort of flashing.)
Click to expand...
Click to collapse
Ok. So I take the 512 pit file from your link and also the official GB firmware from Ramad's thread. Then flash using Odin with only PIT, PDA, Phone and CSC. Also "re-partition", "Auto reboot" and "F Reset Time" needs to be ticked. Sorry about being so padantic but just wanted to make sure I get the steps right the first time. Thanks!!!
blion said:
Ok. So I take the 512 pit file from your link and also the official GB firmware from Ramad's thread. Then flash using Odin with only PIT, PDA, Phone and CSC. Also "re-partition", "Auto reboot" and "F Reset Time" needs to be ticked. Sorry about being so padantic but just wanted to make sure I get the steps right the first time. Thanks!!!
Click to expand...
Click to collapse
yup, that should do it mate.