After installing the lastest "S.U.R.F.A.C.E" ROM on my GT-I9000 I'm presented with the Galaxy S logo and nothing else,
Tried and tried vol up + home + power number of times now with no avail.
Everything was working fine before was able to boot into clockwork recovery ect, unfortunately I do not have a usb cable so can't try odin any help would be great.
Grab yourself a jig from ebay or the likes, or make one
http://forum.xda-developers.com/showthread.php?t=819551
It will boot into download fine the problem I have is it won't boot into recovery is there any way I can wipe it or does it look like I am in need of a cable?
Then reflash back to stock using Odin
What were you flashing from as surface is an oxeded rom, not dexeded.
buttwad said:
What were you flashing from as surface is an oxeded rom, not dexeded.
Click to expand...
Click to collapse
clockwork recovery, i take it I messed up here so
No, meant what rom were you on before your flash? Stock?
oh sorry got the phone of a friend looked like a custom samsung rom, build version was easyprojectv2 if that rings any bells?
Looks like the problem was caused by trying to flash a odexed rom over a deodexed rom, or not having the correct bootloaders for the new rom. Normally before a flash I would return to stock (firmware from sammobiles.com) first via ODIN, do all the wipes, flash a kernel so you have a nice clean install to 'abuse'. Then I would add any custom rom from there be it by ODIN or by cwm.
Grab yourself a usb lead, nice clean flash and start again.
Ok so I've 3 file here:
APBOOT_I9000XWJW1_CL788890_REV03_user_low_ship.tar.md5
CODE_I9000XWJW1_CL788890_REV03_user_low_ship.tar.md5
KERNEL_I9000XWJW1_CL788890_REV03_user_low_ship.tar.md5
s1_odin_20100803.pit (not sure if i need this as was in the root of the odin folder not the firmware?)
Where do the other 3 file go PDA PHONE CSC???
I am also stuck on the same front, i donwloaded rom from samfirmware but it only had PDA part and nothing else, please suggest which official rom should i download??
stevek93 said:
Ok so I've 3 file here:
APBOOT_I9000XWJW1_CL788890_REV03_user_low_ship.tar.md5
CODE_I9000XWJW1_CL788890_REV03_user_low_ship.tar.md5
KERNEL_I9000XWJW1_CL788890_REV03_user_low_ship.tar.md5
s1_odin_20100803.pit (not sure if i need this as was in the root of the odin folder not the firmware?)
Where do the other 3 file go PDA PHONE CSC???
Click to expand...
Click to collapse
I would go this way mate, first grab JVT from sammobiles.com ( register first)
Flash that using ODIN
Comes with 3 files, CSC, PHONE and PDA
PDA file goes to PDA in ODIN
PHONE goes into MODEM in ODIN
CSC goes in CSC in ODIN.
Also select PIT file, should be 512 on the PIT section on ODIN, hit start and it will flash then reboot.
Then open ODIN again, connect phone and flash your KERNEL to the PDA section of ODIN.
Then grab this http://forum.xda-developers.com/showthread.php?t=1117579
and flash using cwm.
Your then on JW1 all rooted and ready to play.
put the "APBOOT_I9000XWJW1_CL788890_REV03_user_low_ship.tar" file into the PDA and flashed it. Everything seems to be working fine might stick with the stock for a while never really needed to be rooted.
ok i just popped the SIM and have no network access when i tap on Mobile Networks in the setting it tells me to insert a SIM????
the firmware i had was wrong didnt have a modem. Downloaded a jvt as buttwad said flashed an now everything working perfect now. cheers mate!
Related
Hi, i have galaxy tab:
PDA: XWJMG
PHONE: XXJMA
Now i started ODIN 1.7 and selected p1000-mck-r3-ext4-cwm.tar in PDA. I didnt select Re-Partition and did not tick anything and did not select PIT file. Now when i connect it says 'added' and when i click on start it goes through the process and says "failed' in the end. Now my tab shows yellow triangle on it. Help
Do you by any chance have locked bootloaders? Anyway as long as the computer recognizes your tab you can fix it. Just use search.
Sent from my Desire HD using XDA App
Robi-K said:
Do you by any chance have locked bootloaders? Anyway as long as the computer recognizes your tab you can fix it. Just use search.
Sent from my Desire HD using XDA App
Click to expand...
Click to collapse
I dont know about bootloader, its an untouched piece. Please tell me how to fix this tab... :-(
Look at the stickyes in the gsm tab development. Just download a rom that doesn't contain bootloaders and flash it via odin. Again you can find such roms in the development section. Read read and read again and you will be able to fix your tab. One question, why did you flash your tab in the first place?
Sent from my Desire HD using XDA App
Download this firmware http://files.deodexed.com/ModADroid-Galaxy-Tablet/Rotohammer/JME/
Then goto http://forum.xda-developers.com/showthread.php?t=932082 & read the bit where it says if your tab does not boot...
Hope this helps
Mark
You need to dload the P1 hidden pit & full J4 version fw
Is it maybe because the rom you selected says cwm? Isn't that supposed to be flashed in clockwork mod?
Thanks guys for all your help, i flashed pit to my phone via ODIN and piece is alive and working now and gave the tab back to my friend. Now just need to know for the future i have ODIN v1.31 and P1_EUR.pit. I selected pit and P1000JPJJ2 on PDA. Now just need to know before flashing do i need to select repartition?
As i read through the tutorial you only select repartition when you are flashing with the pit file!
If you are installing firmware, Flash the custom kernel that is linked on the same page as the overcome rom 2.13 without partition, Then hold vol up and power will put you in recovery mode, You can flash the rom through there useing the install zip from sdcard option but you must copy the custom rom onto the sd card first....
Regards
Mark
slyevo said:
As i read through the tutorial you only select repartition when you are flashing with the pit file!
If you are installing firmware, Flash the custom kernel that is linked on the same page as the overcome rom 2.13 without partition, Then hold vol up and power will put you in recovery mode, You can flash the rom through there useing the install zip from sdcard option but you must copy the custom rom onto the sd card first....
Regards
Mark
Click to expand...
Click to collapse
Well, i know how to flash custom rom, just wanted to flash the firmware through odin since it seems easier...i downloaded P1000JPJJ2 from the following site and it says no repartition, my problem solved..thanks anyway
http://www.thegalaxytabforum.com/index.php?/topic/112-samsung-galaxy-tab-firmware-list/
i have the same problem like the first post. I am using P1000 for asia (malaysia). now i can do nothing with my tab but odin still able to detect it. anyone could help forward me the link for the said rom without bootloader. the link given in the previous post already dead.
andrew21 said:
Hi, i have galaxy tab:
PDA: XWJMG
PHONE: XXJMA
Now i started ODIN 1.7 and selected p1000-mck-r3-ext4-cwm.tar in PDA. I didnt select Re-Partition and did not tick anything and did not select PIT file. Now when i connect it says 'added' and when i click on start it goes through the process and says "failed' in the end. Now my tab shows yellow triangle on it. Help
Click to expand...
Click to collapse
I had the same problem earlier and then i learned that bootloader for stock JM is signed so it show error ... completion (write) failed ... when you try to upgrade or install custom rom using Odin. I reverted back to resurrect my tab by Odin with pit (follow pit version) and check repartition, auto reboot. It works for me but not sure if it will work for others. Good luck.
I have been through a mess of attempts to root my phone and put it into 2e recovery so I could install custom mods, and ended up with nothing but an old version because I had to flash it on to be able to use it.
I'll try to explain the process.. first I had 2.2 firmware with JPC, was rooted already with superuser and then I tried to flash it into 2e recovery but when it finished the phone booted up, got in the main screen where you swipe the screen to unlock but got stuck there after a couple seconds, started vibrating randomly and shut down.
After that happened I flashed an original i9000 tar on it and it came back to life, unrooted and in JP6.
The first time I tried to flash it into 2e I forgot to run odin as an admin, so I thought that was my mistake so I went ahead and tried it again with a JP6 version and ran odin as admin, but the same exact thing happened... gets stuck in the same place so I flashed the original again.
I'm on a EU Galaxy S I9000 JP6 Froyo.
Anyone have an idea what I'm doing wrong?
SmokeyFish said:
I have been through a mess of attempts to root my phone and put it into 2e recovery so I could install custom mods, and ended up with nothing but an old version because I had to flash it on to be able to use it.
I'll try to explain the process.. first I had 2.2 firmware with JPC, was rooted already with superuser and then I tried to flash it into 2e recovery but when it finished the phone booted up, got in the main screen where you swipe the screen to unlock but got stuck there after a couple seconds, started vibrating randomly and shut down.
After that happened I flashed an original i9000 tar on it and it came back to life, unrooted and in JP6.
The first time I tried to flash it into 2e I forgot to run odin as an admin, so I thought that was my mistake so I went ahead and tried it again with a JP6 version and ran odin as admin, but the same exact thing happened... gets stuck in the same place so I flashed the original again.
I'm on a EU Galaxy S I9000 JP6 Froyo.
Anyone have an idea what I'm doing wrong?
Click to expand...
Click to collapse
do you want to stay on 2.2.1 or want to switch to GB...
if you can still get into dowloadmode (vol down / home / power)
froyo XXJPU : http://dl.dropbox.com/u/19506141/Stock - stock modems/I9000XXJPU (2.2.1).exe
GB XWJVH : http://dl.dropbox.com/u/19506141/Stock - stock modems/GT_I9000_XWJVH_XXJVO_NEEJV3_Sbl.exe
flas with odin : http://dl.dropbox.com/u/19506141/flash en drivers/Odin_+_pit.exe
PIT512 file is included, both firmwares come with safe bootloaders.
flash files with repatition checked.
and if you need them samsung drivers for PC :
http://dl.dropbox.com/u/19506141/flash en drivers/SAMSUNG_USB_Driver_for_Mobile_Phones.exe
for rooting your phone you can use
froyo : http://dl.dropbox.com/u/19506141/speedmod-kernel-k13e-500hz.tar
GB JVH :http://dl.dropbox.com/u/19506141/Gingerbread-GT-I9000-XWJVH-stock-kernel+hacks.tar
flash in PDA using odin.Do NOT check repartition....
Thanks for the reply..
I don't want to make any mistakes, as im quite new to this phone and hacking/updating/putting new **** on it, so can you be a little more clear on the steps to take? I'm obviously going to upgrade to GB...
I can get into download mode fine, do I flash the 512 PIT file and the PDA_XWJVH_Sbl.tar.md5 file together? also just to make absolutely sure because I heard the partition thing can brick my phone, should it be checked for this particular flash?
SmokeyFish said:
Thanks for the reply..
I don't want to make any mistakes, as im quite new to this phone and hacking/updating/putting new **** on it, so can you be a little more clear on the steps to take? I'm obviously going to upgrade to GB...
I can get into download mode fine, do I flash the 512 PIT file and the PDA_XWJVH_Sbl.tar.md5 file together? also just to make absolutely sure because I heard the partition thing can brick my phone, should it be checked for this particular flash?
Click to expand...
Click to collapse
You should only use the repartition option when flashing a 3 file firmware. You can get them from samfirmware.com. The JVB firmware has all 3 files so I would download it.
Once downloaded open Odin and stick the files in the required fields. Insert your .pit file and select repart.
Once you have booted in to JVB you can then flash JVH using Odin in the PDA field with NO repartition.
Once booted into JVH I would use CF Root kernal to get root access
Go to insanity thread and check out the link to Ezbase rom, its a cinge! Noob too!
Sent from my GT-I9000 using XDA App
slaphead20 said:
Go to insanity thread and check out the link to Ezbase rom, its a cinge! Noob too!
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
yes i second that,,got me ouy of trouble a few times
Tried everything I could with Odin and phone still stuck in a start loop.
I was downgrading from checkROM to official firmware ZSLA2 with CWM (I wanted to keep ROOT, so I selected "Keep CF-Root kernel") due to stability issues, after restarting the phone got into the start loop.
I flashed with Odin official ZSLA2 with the same result (looped start). I flashed XXKKA (again looped start). During the flashing process, Odin says the flashing was successful. By the way, both ROMS are tar.md5 files.
I tried to remove the battery for over 30 minutes and charge it for 2 hours, tried re-partition in Odin (it's my understanding that with a stock rom, it creates a clean installation), but Odin fails to start the process.
What else can I do?
I am sorry if this has previously asked, but I've been searching for over 2 hours and nothing similar came. Somebody mentioned to use a PIT file in addition, but the other person who got his phone soft bricked didn't solve the problem either. As downloading a ROM is time consuming and I've got many problems with upload sites in china (cannot access to most of them), I would thank any help in regards this issue.
Sounds like your kernel isn't talking properly to your ROM.
A fresh start is your best bet. Flash a stock rom and kernel from Odin and reroot it with CF-Root.
What files are you putting into Odin? There should be a total of 4.
I'd also avoid the use of a .pit file. I haven't even seen the mention of one in all my time on the Note forum. I really don't think Samsung uses them the way they used to. (I used to have to flash one all the time when testing roms on the original galaxy tab.)
I am using official ROM N7000ZSLA2_N7000ZSLA2_N7000XLA4_HOME.tar.md5 into PDA and also tried ROM N7000XXKKA_N7000XEUKK3_N7000XXKK5_HOME.tar.md5, which I used successfully in the past to make root into my phone.
Does it really make a difference to flash 4 separate files instead of a full pack? Where can I find an official ROM with pda radio and kernel separated? Just untar the ROM?
btyork said:
I'd also avoid the use of a .pit file. I haven't even seen the mention of one in all my time on the Note forum. I really don't think Samsung uses them the way they used to. (I used to have to flash one all the time when testing roms on the original galaxy tab.)
Click to expand...
Click to collapse
Oh, they do come into the Note; I flashed the Beta ICS, and one of the things they mention is to use the PIT file for the 16GB version, instead of the 32GB that comes with the leaked ROM. Unfortunately I deleted that ROM, and donwloading it is painfully slow and also wouldn't necessarily solve my problem as I couldn't even make a phone call.
True - the .pit file can change the size of the partition data... But that's not your problem. If the .pit file was the problem - you'd boot, but have 0 storage space (or something else wonky pertaining to your disk size.)
Open the tar up and make sure it has all the files in it. Should be 5.
I've attached a screenshot of the 5 file names. Make sure they are all in the .tar you are flashing.
Even i had similar problem after flashing Stock ROM using Odin (PC). Only thing i did is just rebooted in recovery and Wipe/factory Reset and Wipe cache. everything went fine.
btyork said:
True - the .pit file can change the size of the partition data... But that's not your problem. If the .pit file was the problem - you'd boot, but have 0 storage space (or something else wonky pertaining to your disk size.)
Open the tar up and make sure it has all the files in it. Should be 5.
I've attached a screenshot of the 5 file names. Make sure they are all in the .tar you are flashing.
Click to expand...
Click to collapse
This are the files I am flashing:
Sorry, I am new user and still cannot post screen captures. I do have more than the 5 files.
In XXKKA I have:
Boot
Cache
Factoryfs
Hidden
Modem
param.lfs
Sbl
zImage
In ZSLA2:
Cache
Factoryfs
Hidden
Modem
zImage
btyork said:
Even i had similar problem after flashing Stock ROM using Odin (PC). Only thing i did is just rebooted in recovery and Wipe/factory Reset and Wipe cache. everything went fine.
Click to expand...
Click to collapse
I can only enter into Download mode, not recovery mode.
Odin is full wipe, right? What the hell am I doing wrong?
N7000xxla1_n7000oxala1_oxa
http://hotfile.com/dl/141060546/b0c7420/N7000XXLA1_N7000OXALA1_OXA.rar.html
download this firmware, it's gonna take awhile but worth a try..
try flashing this rom using PC odin.
pit: Q1_20110914_16GB.pit
pda: CODE_N7000XXLA1_CL868264_REV02_user_low_ship.tar.md5
phone: MODEM_N7000XXLA1_REV_05_CL1093393.tar.md5
csc: GT-N7000-MULTI-CSC-OXALA1.tar.md5
check re-partition, auto reboot, F. reset time.
let me know if it works!
Han
choihan06 said:
download this firmware, it's gonna take awhile but worth a try..
try flashing this rom using PC odin.
pit: Q1_20110914_16GB.pit
pda: CODE_N7000XXLA1_CL868264_REV02_user_low_ship.tar.md5
phone: MODEM_N7000XXLA1_REV_05_CL1093393.tar.md5
csc: GT-N7000-MULTI-CSC-OXALA1.tar.md5
check re-partition, auto reboot, F. reset time.
let me know if it works!
Han
Click to expand...
Click to collapse
Well, I finally managed to get my phone back. I was getting a lot of corrupted ROMS. I couldn't download your ROM as well; I managed to install the Beta ICS 4.0.3 which comes with a PIT for repartition, as I think the problem was that my booting partition was screwed.
Problem now is: that rom screws the phone and the keyboard, but at least I have my phone back.
Thank you
mrfan said:
Well, I finally managed to get my phone back. I was getting a lot of corrupted ROMS. I couldn't download your ROM as well; I managed to install the Beta ICS 4.0.3 which comes with a PIT for repartition, as I think the problem was that my booting partition was screwed.
Problem now is: that rom screws the phone and the keyboard, but at least I have my phone back.
Thank you
Click to expand...
Click to collapse
I have just recently dowloaded and installed the rom without problem. What do you mean by corrupted rom?
Sent from my GT-N7000 using xda premium
I too bricked my phone but after reading this guide (ABD wouldn't recognise my device so I couldn't follow it) I understood the partitions had become messed up.
I read somewhere about the PIT files.
I ODINed the ABYSS Kernal and PIT (Q1_20110914_16GB-patched) for my 16gb n7000 ticked the repartition box. It booted into CWM recovery and I used the restore and bingo.
Fix The problem
I had the same problem, the device got into start loop. JUST DO A FULL WIPE..! and the device should start normally. I worked for me.... :good:
Sent from my GT-N7000 using xda premium[/QUOTE]
I want to go back to gingerbread am rinning Dark Knight rom any help plz
Why God .. why ...
Flash stock through ODIN or Heimdall and thats it
If you had to ask this, it's probably a good thing you're going back to stock.
Sent from my Telus Fascinate running OneCosmics ICS!
why would you say that
Get stock ROM here.
http://www.sammobile.com/firmware/?page=3&t=1&o=1&m=GT-I9000&r=-1#modelsa
You need stock ROM (3 file stock ROM), Odin & Pit512.
1. Start ODIN.
2. Select the files into the relevant places in ODIN.
3. Click repartition.
4. Put phone into download mode.
5. Connect phone to pc.
6. wait for Odin to connect to phone.
7. click start.
8. wait for ODIN to finish & for phone to reboot.
You must have pit512 and click repartition as ICS uses a different file system to Gingerbread.
You may have a boot loop after doing this. I have had this occasionally. To solve this reflash with ODIN. This time make sure repartition is unchecked and don't flash pit file.
Sorry Screen shot says scs. I meant CSC.
Samsung Captivate SGH_I897 running CWM 10.1.2. Does not recognize sim card, but sim card works in another phone. Looking for a modem that may work in the Memphis, TN area or any modem files at all, as well as instructions on how to flash it. Bought the phone cheap at a yard sale. A friend of mine has told me it is probably the modem file, but he isnt that familiar with androids, just the one he has. Could resetting back to stock and reflashing help? Or just reflash the modem?
Back to stock usually solves most issues. Please check your IMEI number given in the About Device page (do not post it here) with the number printed in the back of your phone to see if they match.
IMEI numbers match. Thank you for your reply.
Re: flashing
wnb_jr said:
Samsung Captivate SGH_I897 running CWM 10.1.2. Does not recognize sim card, but sim card works in another phone. Looking for a modem that may work in the Memphis, TN area or any modem files at all, as well as instructions on how to flash it. Bought the phone cheap at a yard sale. A friend of mine has told me it is probably the modem file, but he isnt that familiar with androids, just the one he has. Could resetting back to stock and reflashing help? Or just reflash the modem?
Click to expand...
Click to collapse
@wnb_jr: Take a look at this sticky thread for a flashing guide, and attached to Post 1 is the Odin software you would need: [Stock ROMs](OneClicks Master Collection)+[Kernels (Stock & w/ CWM)]+[Modems] UPDATED. Links in my signature I would recommend following: Stock GB ROM+ Kernel, Modems. The ROM and Corn Kernel are Ginger Bread stock release KK4, and the Modems sticky thread has a link to a map where users tag which modem worked for them and in what area. And as always, have fun.
Quick version flashing to stock (mostly):
1. Download "I897UCKK4 Odin One Click - Stock, NO Bootloaders, Re-partition, Full Wipe" and extract. (Stock GB ROM link)
2. Follow instructions from 4-2ndtwin contained in the txt file to flash the stock rom.
3. Download "Odin3v1.85.zip" and extract. (Stock ROMs OneClicks Master Collection post #1)
4. Download Odin flashable version of Corn Kernel 7.06. (Kernel link)
5. Run Odin3 v1.85.exe. Load Corn kernel into the PDA slot of Odin. Connect your phone in Download Mode to your computer, wait until Odin recognizes it, and click Start. When Odin displays the big green PASS, disconnect the micro USB from your phone.
6. Reboot your phone into Recovery (typically holding down three buttons Volume Up, Down, and Power until the phone reboots, then when you see the initial splash screen come up let go of the buttons). Navigate the Recovery menus and find the option to Root and install SuperUser.
7. Profit. Now that you're back to Stock with root and SU, you can go anywhere from there- flash other ROMs if you want (now on you can flash them through Recovery instead of Odin). Backup options in Recovery are referred to as 'Nandroid backup'. Recovery is also known as CWM or ClockWorkMod recovery. If necessary check out the Modems thread. Any issues connecting your phone may be answered in 4-2ndtwin's thread Captivate - PC Connection Issues, Download Mode and Recovery Mode Help.