I can't flash CWM to my s6500d
I keep getting this error:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> MD5 hash value is invalid
<OSM> cwm-6.0.3.3-b2-jena.tar.md5 is invalid.
<OSM> End...
egy_b0y said:
I can't flash CWM to my s6500d
I keep getting this error:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> MD5 hash value is invalid
<OSM> cwm-6.0.3.3-b2-jena.tar.md5 is invalid.
<OSM> End...
Click to expand...
Click to collapse
Try with CWM 6.0.3.2 and then update to CWM 6.0.4.5 via CWM option Install from zip. This 6.0.3.3b2 file have problems after migrating goo.im hosts and don't use it.
midzan21 said:
Try with CWM 6.0.3.2 and then update to CWM 6.0.4.5 via CWM option Install from zip. This 6.0.3.3b2 file have problems after migrating goo.im hosts and don't use it.
Click to expand...
Click to collapse
Do you have the "CWM 6.0.3.2" ? Where can I get it?
=====
btw I was able to get 6.0.4.5 by flashing clockworkmod-5.0.2.8.tar.md5 first using Odin then installing it as a zip
But 6.0.4.5 is useless for me because whenever I try flashing the rom that I want
I get error: can't mount storage/sdcard0
and If I try flashing the rom from the clockworkmod-5.0.2.8.tar.md5 it doesn't go through idk why
egy_b0y said:
Do you have the "CWM 6.0.3.2" ? Where can I get it?
=====
btw I was able to get 6.0.4.5 by flashing clockworkmod-5.0.2.8.tar.md5 first using Odin then installing it as a zip
But 6.0.4.5 is useless for me because whenever I try flashing the rom that I want
I get error: can't mount storage/sdcard0
and If I try flashing the rom from the clockworkmod-5.0.2.8.tar.md5 it doesn't go through idk why
Click to expand...
Click to collapse
CWM 6.0.3.2 - http://goo.im/devs/thewhisp/jena-recovery/cwm-6.0.3.2-jena-build-2.tar.md5
And that problem is error after updating CWM from 5.0.2.8 to newer version via old CWM
midzan21 said:
CWM 6.0.3.2 - http://goo.im/devs/thewhisp/jena-recovery/cwm-6.0.3.2-jena-build-2.tar.md5
And that problem is error after updating CWM from 5.0.2.8 to newer version via old CWM
Click to expand...
Click to collapse
Thank you for your help
I still have a problem tho I tried this one and got the same error
All I want now is a recovery that I can use to flash a CM10.1 ROM on s6500D
I promised my cousin to do it for him when I saw how easy the tutorial was
I can't find anyone else so you'll have to help me
You can use cm10.1 with cwm 6.0.3.3
Try to flash it again on other windows pc, but make sure that you have installed ,,Samsung USB Drivers for mobile phones,, (google it)
If it fails, install stock rom, and try again. Good Luck
Sent from my GT-S6500D using xda app-developers app and cm10.1
i have the same problem , i fixed it by trying :
" cwm-6.0.3.2-jena-build-2.tar "
and i solved this problem
but something is wrong with it , i can't mount sdcard , keep telling me : E: can't mount /sdcard/
Note : I Have an galaxy mini 2 gt s6500d
but at least i can moun phone internal storage so i can get my data
peace ...
I have the same problem... Odin gives the Md5 error.
All other files of TheWhisp work, except for that stable version which is what I want/need!
Can anybody please upload a working copy of 6.0.3.3-b2 ?
Thanks in advance!
Related
My Galaxy note does not boot anymore. I can boot CWM but when I flash a ROM or format /system the device hangs.
Any help would be greatly appreciated..
Have you tried wipe cache from recovery?
And wat exact happened before error occured?
Thanks for your quick reply
I got stuck on the Samsung N7000 screen after a reboot. I'm running [ROM][04.04.12] imilka's AOSP ICS v08 [IMM76D/4.0.4]
Formating data/cache works but when you install a ROM it just sits on installing update. I've tried flashing multiple ROMS.
If I select unmount /system or format /system it hangs as well. Same happens when I try to restore my backup from yesterday. I can only boot CWM or download mode at the moment.
I've only had HTC phones before so I don't have any Samsung experience.
Which kernel you had ?
What exact error occurs, when you flashing ROM?
I was using the kernel that came with the ROM.
I was just doing a reboot after the device has been powered off for a few hours. Nothing special.
Whe I try to flash a ROM now it just hangs at installing system forever. My guess is that something has screwed up the system parttion because I'm unable to format it now using CWM.
Any other way to try repartition the device?
try using flash with PC Odin
here is stock ROM
http://forum.xda-developers.com/showthread.php?t=1424997
download N flash using PC odin, you can find installation guide in post#2
Trying it right now. Phone is in download mode. Odin reports:
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CODE_N7000XXLC1_CL1003701_REV02_user_low_ship.tar.md5 is valid.
<OSM> MODEM_N7000XXLB2_REV_05_CL1106002.tar.md5 is valid.
<OSM> GT-N7000-MULTI-CSC-OXALC1.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/011> Odin v.3 engine (ID:11)..
<ID:0/011> File analysis..
<ID:0/011> SetupConnection..
for about 5 minutes. Is it normal that it takes this long to start the connection?
It seems this is connection error
Try reinstalling driver on PC
connect device to dierct main board USB slot(rear side PC)
close kies/anti virus if running
Problem solved. Thanks a lot for your help!
Selecting 1 option at a time worked (maybe coincidence) Did PDA > Phone > CSC.
Phone boots
N7000XXLC1---------2.3.6-------2012 March----------N7000OXALC1-----------Open Europe----------------------------- Download (wipe)
now and I'll probably keep it that way untill Samsung released ICS.
Learned something about Samsung phones and Odin today. Used to do everything with ADB and fastboot with HTC devices.
Thanks again!!
hi people,
So here is my issue, i rooted my tab after having it about a year and wanted to install a custom rom, installed RomManager from the market and installed the clockwork recovery mod, BUT i picked galaxy tab 10.1 when it asked me what phone i had, as there was no other option. I checked on google first and it seems other people with the 8.9 are using the clockwork recovery mod so i thought it was safe.
Now its dead and powers up to the samsung logo, and then dies again.
Help! (currently i am draining the battery as it is mentioned in another thread in this forum)
Thanks
(tried the APX thing in nvflash and it was a no go)
epictwiglet said:
hi people,
So here is my issue, i rooted my tab after having it about a year and wanted to install a custom rom, installed RomManager from the market and installed the clockwork recovery mod, BUT i picked galaxy tab 10.1 when it asked me what phone i had, as there was no other option. I checked on google first and it seems other people with the 8.9 are using the clockwork recovery mod so i thought it was safe.
Now its dead and powers up to the samsung logo, and then dies again.
Help! (currently i am draining the battery as it is mentioned in another thread in this forum)
Thanks
(tried the APX thing in nvflash and it was a no go)
Click to expand...
Click to collapse
It's alright. Go to the guide in my signature and read up about ODIN because you will use it to save your tablet. It's all there in FAQs, How-tos and the Toolkit at the end.
i highly recommend checking out nirogu325's guide for an explanation of ODIN. it should solve your problem
Download Odin
http://www.google.com/url?sa=t&rct=...IxHp1ISlP2fzGKhtw&sig2=4EbBRrWss7eeO2JNr8TzzA
Download the proper recovery
7310 and 7300
http://forum.xda-developers.com/showthread.php?t=1312218
i957
http://forum.xda-developers.com/showthread.php?t=1462770
Power on the tablet, you may need to charge it.
As it is powering on hold down the power and the vol down button
Go into download, not recovery
Connect your tablet to your computer with the USB cable
Open up Odin
You should see box that says PDA, click there and it will want you to find a file. Choice the recovery file
Make sure the box that says partition or repartion are NOT check
then check start and wait. DO NOT touch or disconnect the tablet while it works
bdfull3r said:
i highly recommend checking out nirogu325's guide for an explanation of ODIN. it should solve your problem
Download Odin
http://www.google.com/url?sa=t&rct=...IxHp1ISlP2fzGKhtw&sig2=4EbBRrWss7eeO2JNr8TzzA
Download the proper recovery
7310 and 7300
http://forum.xda-developers.com/showthread.php?t=1312218
i957
http://forum.xda-developers.com/showthread.php?t=1462770
Power on the tablet, you may need to charge it.
As it is powering on hold down the power and the vol down button
Go into download, not recovery
Connect your tablet to your computer with the USB cable
Open up Odin
You should see box that says PDA, click there and it will want you to find a file. Choice the recovery file
Make sure the box that says partition or repartion are NOT check
then check start and wait. DO NOT touch or disconnect the tablet while it works
Click to expand...
Click to collapse
So i dont need the clockwork recovery mod files? just the stock recovery? and it wont boot to download mode so i cant connect it to odin unless im missing something, let me read it again.....
Ok! i have managed to get to download mode, i discharged the tab overnight and plugged it in this morning and he booted past the samsung logo, i cant remember what thread i saw that idea in but it worked. awesome, now to try and flash stock recovery, hope i dont duck it up!
Thanks guys, ill post again if it doesnt work @)
nirogu325 said:
It's alright. Go to the guide in my signature and read up about ODIN because you will use it to save your tablet. It's all there in FAQs, How-tos and the Toolkit at the end.
Click to expand...
Click to collapse
all i get is:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> MD5 hash value is invalid
<OSM> recovery.img.md5 is invalid.
<OSM> End...
Booooo, now what? im using an old version of odin, so maybe ill try and new one?
Solved! So i was putting the MD5 file and it wasnt working, so i put the whole .RAR file in and it worked! It wouldnt flash the clockwork recovery mod though so i had to put the stock one back on.
Still it works again, thanks guys.
epictwiglet said:
Solved! So i was putting the MD5 file and it wasnt working, so i put the whole .RAR file in and it worked! It wouldnt flash the clockwork recovery mod though so i had to put the stock one back on.
Still it works again, thanks guys.
Click to expand...
Click to collapse
I am glad you have your tablet back in working order.
Well now that you have the stock recovery, you can attempt to flash the Clockwork recovery again the right way if you want to. You now know how to recovery your tablet if you have a brick again so you don't have anything to lose
hi can someone help me with a brick i957. i am not seeing anything on the lcd its totally black however when i plug the usb to the pc its being recognized as Qualcom hs-usb diagnostics 9006. i thought well maybe i can flash it with odin but this is all i am getting:
<ID:0/155> Added!!
<ID:0/155> Removed!!
<ID:0/155> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CWMR5x_i957_recovery.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/155> Odin v.3 engine (ID:155)..
<ID:0/155> File analysis..
<ID:0/155> SetupConnection..
and its been there for almost 45 mins with no response. any help will be greatly appreciated.
Linkzz said:
hi can someone help me with a brick i957. i am not seeing anything on the lcd its totally black however when i plug the usb to the pc its being recognized as Qualcom hs-usb diagnostics 9006. i thought well maybe i can flash it with odin but this is all i am getting:
Added!!
Removed!!
Added!!
Enter CS for MD5..
Check MD5.. Do not unplug the cable..
Please wait..
CWMR5x_i957_recovery.tar.md5 is valid.
Checking MD5 finished Sucessfully..
Leave CS..
Odin v.3 engine (ID:155)..
File analysis..
SetupConnection..
and its been there for almost 45 mins with no response. any help will be greatly appreciated.
Click to expand...
Click to collapse
If Odin recognizes the tab there is a chance to recover it. What rom are you trying to flash? Go to sammobile.com and get the stock gb rom.
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
i am using a stock rom from sammy roms but same problem
<ID:0/155> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> HOME_I957UCLK4_CL1167230_REV02_user_low_noship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/155> Odin v.3 engine (ID:155)..
<ID:0/155> File analysis..
<ID:0/155> SetupConnection..
Try with odin ver 1.85. I haven't had luck with 3.
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
jd1639 said:
Try with odin ver 1.85. I haven't had luck with 3.
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
Click to expand...
Click to collapse
thats what i have been using; when i try with odin3 v3.07 its not recognizing the tablet
I know it doesn't make sense but keep trying to flash the rom. I've seen it not work for many tries and then it would for some reason. If odin recognizes the tab you are not hard bricked. You should be able to get it to operate again.
Also, use the gb Rom, uckj7
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
Friends,
I am using samsung GT I 9000 phone..
I tried to update in using wiki.cyanogenmod.com/wiki/Samsung_Galaxy_S:_Full_Update_Guide
I am able to install cynogen mode successfully but all my data was lost. During this installation I back up the data using recovery mode and backup & Restore option.
After successfully installing the cyanogenmode i rbooted the phone and tried to restore the data..but this time I face issues while restoring and on screen it shows an message ' error in flashing.. (Simllar of this)... After that I was unable to start my phone and it getting stuck at samsung galaxy s logo screen...
Then I again tried to install but this time whwn i 'Choose zip from sdcard' it start the istallation but throws an error:-
Error in /mnt/sdcard/cm-7.2.0-galaxysmtd.zip(status 7)
Installation abortd..
Can you guys help me on this???? I have attached the snapshot of the screen...
you won't be able to restore data from gb to cm7, not system data nor app data, so you need to reflash gb and start again
Here's my kit to do that quickly and easily, unzip and read.txt
http://db.tt/MOGZx01S
Credits to nitr8 and Chainfire
Thanks
Hi
Thanks for Help..I follow your kit and successfully started may phone..
thanks once again for help..
SetupConnection...
slaphead20 said:
you won't be able to restore data from gb to cm7, not system data nor app data, so you need to reflash gb and start again
Here's my kit to do that quickly and easily, unzip and read.txt
Credits to nitr8 and Chainfire
Click to expand...
Click to collapse
Hi!
I downloaded your kit. I am having the same trouble as ranejitendra.
I followed the Samsung_Galaxy_S:_Full_Update_Guide. But when it was time to reboot after installing CM9 i just went into a bootloop. When I tried to restore my backup it says it is successfully restored but when it reboots it just stops at the Samsung logo screen.
When I use the kit I firstly let it be in the logo screen and Odin recognizes it becuase the ID:COM turns yellow and says 0:[COM10]
Secondly I tried to start it in recovery mode. Same result. In downloadmode it is not recognized.
when I hit start this comes:
<ID:0/010> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> EZbase-PDA-XWJVH.tar.md5 is valid.
<OSM> EZbase-PHONE-XXJVO.tar.md5 is valid.
<OSM> EZbase-CSC-NEEJV3.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/010> Odin v.3 engine (ID:10)..
<ID:0/010> File analysis..
<ID:0/010> SetupConnection..
Nothing happens after SetupConnection!
Any tips for me? I do not care about data or settings on the phone.
2 days ago I did this exact thing on S2 and it worked! I kept the files seperated as well...
jonnis said:
Any tips for me?
Click to expand...
Click to collapse
Just reboot Phone after pulling out battery, restart Odin and try again
xsenman said:
Just reboot Phone after pulling out battery, restart Odin and try again
Click to expand...
Click to collapse
Tried that a number of times with the same result. It just stays in Samsung bootscreen (without triangle) and Odin says <ID:0/010> SetupConnection..
And nothing happens...
Thanks for the tip though.
UPDATE: Read this post and got the phone working:
http://forum.xda-developers.com/showthread.php?t=1102881
Guys i have problem with my gt-s5570I
I rooted it than tryed to install rom but it is just not possible. When i turn on my phone it cant boot. when i turn it on using vol up + power+ middle button it boots a android system recovery and with blue letters it writes:
Appling Muti-csc --
E:failed to mount /system (invaild argument)
E:failed to mount /system (invaild argument)
than i enter apply update ...
than CMW_gt-s5570i.zip
and than it boots clockworkmod recovery v5.0.2.6
than i wipe data/catch and i enter instal zip form sd ... and i enter ss55570i-jblastv303. and than installation procces begins and it finishes and there writes official rom by avijit gohosh82 .... install from sdcard complete.
But when i reboot my phone it cant boot same as at begining. Than i again pres vol up + power + middle bottun and it loads android system recovery .... yes like from start. I tryed this multiple times with same result. Even tryed other roms and downloaded all files again.
Then i tryed with kies firmware recovery and it cant even recognize my phone.
Guys help me pls
Then i tryed ODIN and when i enter download mode odin doesnt recognize my phone , but when i enter android system recovery it recognize my phone but result is
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> DefaultCalDataWithBoot_S5570IXXKL4_REV03.tar.md5 is valid.
<OSM> PDA_S5570IXXKL4_REV03.tar.md5 is valid.
<OSM> MODEM_S5570IXXKL4_REV03.tar.md5 is valid.
<OSM> GT-S5570I-MULTI-CSC-OXXKL3.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> All threads completed. (succeed 0 / failed 0)
it is when i uncheck bootloader cuz when i check it it writes error ... guys pls help
solution
drose said:
Guys i have problem with my gt-s5570I
I rooted it than tryed to install rom but it is just not possible. When i turn on my phone it cant boot. when i turn it on using vol up + power+ middle button it boots a android system recovery and with blue letters it writes:
Appling Muti-csc --
E:failed to moun, /system (invaild argument)
E:failed to mount /system (invaild argument)
than i enter apply update ...
than CMW_gt-s5570i.zip
and than it boots clockworkmod recovery v5.0.2.6
than i wipe data/catch and i enter instal zip form sd ... and i enter ss55570i-jblastv303. and than installation procces begins and it finishes and there writes official rom by avijit gohosh82 .... install from sdcard complete.
But when i reboot my phone it cant boot same as at begining. Than i again pres vol up + power + middle bottun and it loads android system recovery .... yes like from start. I tryed this multiple times with same result. Even tryed other roms and downloaded all files again.
Then i tryed with kies firmware recovery and it cant even recognize my phone.
Guys help me pls
Then i tryed ODIN and when i enter download mode odin doesnt recognize my phone , but when i enter android system recovery it recognize my phone but result is
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> DefaultCalDataWithBoot_S5570IXXKL4_REV03.tar.md5 is valid.
<OSM> PDA_S5570IXXKL4_REV03.tar.md5 is valid.
<OSM> MODEM_S5570IXXKL4_REV03.tar.md5 is valid.
<OSM> GT-S5570I-MULTI-CSC-OXXKL3.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> All threads completed. (succeed 0 / failed 0)
it is when i uncheck bootloader cuz when i check it it writes error ... guys pls help
Click to expand...
Click to collapse
I finally solved my problem. It was provably about drivers. I have downloaded new drivers and i have installed them and than I have installed my prevous drivers. I opened Odin and I went to Odin/download mode on my GT-S5570I and than i have connected it via USB to my pc and than my computer have finnaly recognized my phone , after that it was piece of cake. I installed PDA only and it booted and ofc it worked and I was able to install custom rom ...
Hello Thanks in Advance For Your time
My n7000 had r5 kernel with carbon rom 4.4. I Chose to reboot to system from kernel it asked me 1)no 2)fix system reboot i chose 2 and i got stuck at reboot loop but i could access recovery and download mode.
then i try to install philz_touch_6.07.9-n7000 after wiping data cache and dalvik through recovery and rebooted back to philz recovery
after then i flash [ROM][4.4.2] CyanogenMod 11.0 [OFFICIAL][NIGHTLIES] after wiping data cache and dalvik
and i got stuck at samsung logo cant get into recovery mode but can access download mode
i tried to reflash philz kernel through odin but it says
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> philz_touch_6.07.9-n7000.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> recovery.img
<ID:0/003> NAND Write Start!!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I cant even charge my phone it shows 100% battery when i plug in
Please help Thanks in advance
davslove said:
Hello Thanks in Advance For Your time
My n7000 had r5 kernel with carbon rom 4.4. I Chose to reboot to system from kernel it asked me 1)no 2)fix system reboot i chose 2 and i got stuck at reboot loop but i could access recovery and download mode.
then i try to install philz_touch_6.07.9-n7000 after wiping data cache and dalvik through recovery and rebooted back to philz recovery
after then i flash [ROM][4.4.2] CyanogenMod 11.0 [OFFICIAL][NIGHTLIES] after wiping data cache and dalvik
and i got stuck at samsung logo cant get into recovery mode but can access download mode
i tried to reflash philz kernel through odin but it says
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> philz_touch_6.07.9-n7000.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> recovery.img
<ID:0/003> NAND Write Start!!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I cant even charge my phone it shows 100% battery when i plug in
Please help Thanks in advance
Click to expand...
Click to collapse
You can't flash Philz Touch 6 using odin.
You need to flash PhilZ kernel 5, odin version.
link here:
http://d-h.st/users/philz_touch/?fld_id=16061#files
Hope you can work it out.
davslove said:
Hello Thanks in Advance For Your time
My n7000 had r5 kernel with carbon rom 4.4. I Chose to reboot to system from kernel it asked me 1)no 2)fix system reboot i chose 2 and i got stuck at reboot loop but i could access recovery and download mode.
then i try to install philz_touch_6.07.9-n7000 after wiping data cache and dalvik through recovery and rebooted back to philz recovery
after then i flash [ROM][4.4.2] CyanogenMod 11.0 [OFFICIAL][NIGHTLIES] after wiping data cache and dalvik
and i got stuck at samsung logo cant get into recovery mode but can access download mode
i tried to reflash philz kernel through odin but it says
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> philz_touch_6.07.9-n7000.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> recovery.img
<ID:0/003> NAND Write Start!!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I cant even charge my phone it shows 100% battery when i plug in
Please help Thanks in advance
Click to expand...
Click to collapse
i had the same problem yesterday.
i solved it by changing usb cable and trying different usb port and using odin 3.09 with stock rom file (jb 4.1.2).
after flash boot into recovery and flash this philz file : PhilZ-cwm6-XXLTA-ATL-5.15.0-signed.zip
hope this help you.
cant flash cyanogenmod 11
thx a lot got recovery but i am unable to flash cyanogenmod 11 and y is the battery status always 100% in recovery and normal switched off charging
Does it anything to do with the battery? can i install rom with charger plugged in if no battery charge coz it not charging
i tried installing carbon rom and cyanogenmod 11 but it reboots after displaying installing package
davslove said:
thx a lot got recovery but i am unable to flash cyanogenmod 11 and y is the battery status always 100% in recovery and normal switched off charging
Does it anything to do with the battery? can i install rom with charger plugged in if no battery charge coz it not charging
i tried installing carbon rom and cyanogenmod 11 but it reboots after displaying installing package
Click to expand...
Click to collapse
If you have cm11 installed. Reboot to recovery. Do a factory reset.
Sent from my Nexus 5 using Tapatalk
AndroidSlave said:
If you have cm11 installed. Reboot to recovery. Do a factory reset.
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
cant get into recovery mode tried installing stock rom using odin installed it successfully but no solution tried installing it with pit file still nothing
my battery has no charge and its not charging maybe that is the issue?
tried upgrading with kies using tools>firmware upgrade and initialisation but it says gt-n7000 does not support initialisaztion
currently i am stuck at empty battery icon with refresh circle and when i try to go into recovery mode i see android icon with blue cirle refreshing for a second and cell reboots to same empty battery icon with a refresh circle
Pleasssssssssssssssse HELP
davslove said:
cant get into recovery mode tried installing stock rom using odin installed it successfully but no solution tried installing it with pit file still nothing
my battery has no charge and its not charging maybe that is the issue?
Click to expand...
Click to collapse
After flashing stock rom via odin you need to boot into recovery. Then wipe cache and data. It is better to glash Philz kernel odin version after flashing stock rom. Then get to recovery and wipe.
Sent from my GT-N7000 using Tapatalk 2
forest1971 said:
After flashing stock rom via odin you need to boot into recovery. Then wipe cache and data. It is better to glash Philz kernel odin version after flashing stock rom. Then get to recovery and wipe.
Sent from my GT-N7000 using Tapatalk 2
Click to expand...
Click to collapse
Hey thx
i wiped data and cache using recovery but stuck at reboot next what?
i can access recovery and download mode both now
I would try to use Philz recovery to do 'clean to install rom' then flash a stock based custom rom.zip.
Sent from my GT-N7000 using Tapatalk 2
forest1971 said:
I would try to use Philz recovery to do 'clean to install rom' then flash a stock based custom rom.zip.
Sent from my GT-N7000 using Tapatalk 2
Click to expand...
Click to collapse
Tried that stuck at the same
Problems i am facing currently
1)cant operate phone with battery it gives no response
2)when i plug in battery doesnt charge battery status shows 100%
davslove said:
Tried that stuck at the same
Problems i am facing currently
1)cant operate phone with battery it gives no response
2)when i plug in battery doesnt charge battery status shows 100%
Click to expand...
Click to collapse
you need to describe more detail what rom you flashed and what error it gave.
With little info there is no way to help.
forest1971 said:
you need to describe more detail what rom you flashed and what error it gave.
With little info there is no way to help.
Click to expand...
Click to collapse
at stock recovery tried installing philz 6.25 zip using rcovery got status 7 error
then installed philz using odin but now while installing latest carbon after wipe phone reboots after displaying installing package
tried installing philz 6.25 from philz recovery shows same reboots after displaying installing package
davslove said:
at stock recovery tried installing philz 6.25 zip using rcovery got status 7 error
then installed philz using odin but now while installing latest carbon after wipe phone reboots after displaying installing package
tried installing philz 6.25 from philz recovery shows same reboots after displaying installing package
Click to expand...
Click to collapse
You did not read enough on what is needed to install 4.4.2. Rule of thumb: always read and follow rom flash instruction carefully before you tried to install a new rom!
Btw, Philz Touch recovery will not work now. You need to use Philz Kernel with recovery.
You need to read more to figure these things out before getting yourself into more troubles. If you cannot understand instruction well, then better stay with stock or stock-based 4.12 to be safe. Cheers
forest1971 said:
You did not read enough on what is needed to install 4.4.2. Rule of thumb: always read and follow rom flash instruction carefully before you tried to install a new rom!
Btw, Philz Touch recovery will not work now. You need to use Philz Kernel with recovery.
You need to read more to figure these things out before getting yourself into more troubles. If you cannot understand instruction well, then better stay with stock or stock-based 4.12 to be safe. Cheers
Click to expand...
Click to collapse
sorry brother me being noob can you please brief me stepwise what i need to do and if possible link me
i will describe my current situation i am on philz touch 5 can access recovery and download
Please Help me!
i promise i will read carefully and do it as you say be my saviour
davslove said:
sorry brother me being noob can you please brief me stepwise what i need to do and if possible link me
i will describe my current situation i am on philz touch 5 can access recovery and download
Please Help me!
i promise i will read carefully and do it as you say be my saviour
Click to expand...
Click to collapse
From Philz recovery you can do "clean to install rom" then flash a 4.1.2 custom rom. Then you should be good.
If you want 4.4.2 then you need to flash raw4 kernel, then reboot into recovery (not to system) then flash the 4.4.2 rom.
BTW, as I said, read instruction carefully from the rom thread that you want and follow exactly the instruction by the rom dev.
forest1971 said:
From Philz recovery you can do "clean to install rom" then flash a 4.1.2 custom rom. Then you should be good.
If you want 4.4.2 then you need to flash raw4 kernel, then reboot into recovery (not to system) then flash the 4.4.2 rom.
BTW, as I said, read instruction carefully from the rom thread that you want and follow exactly the instruction by the rom dev.
Click to expand...
Click to collapse
Tried installing [ROM][4.1.2][XXLTC]TouchWizLite v1.6[05MAR2014] after
3. On CWM Recovery again, Go to Wipe Data/Factory Reset -> Wipe Data/Factory Reset.
4. Go to Mounts and Storage -> Format /system
5. Go to Mounts and Storage -> Format /preload
but i am unable to install it stuck after opening package > installing package > cell reboots
i am on dev preferred PhilZ-cwm6-XXLTA-ATL-5.15.0-signed.zip
y is that i cant operate using battery
and when i plugin battery status shows 100%
is this some hardware isuue?
davslove said:
Tried installing [ROM][4.1.2][XXLTC]TouchWizLite v1.6[05MAR2014] after
3. On CWM Recovery again, Go to Wipe Data/Factory Reset -> Wipe Data/Factory Reset.
4. Go to Mounts and Storage -> Format /system
5. Go to Mounts and Storage -> Format /preload
but i am unable to install it stuck after opening package > installing package > cell reboots
i am on dev preferred PhilZ-cwm6-XXLTA-ATL-5.15.0-signed.zip
Click to expand...
Click to collapse
Try with another rom or another download. Do 'clean to install' as I said and also wipe dalvik cache (under advanced menu).
Sent from my GT-N7000 using Tapatalk 2
forest1971 said:
Try with another rom or another download. Do 'clean to install' as I said and also wipe dalvik cache (under advanced menu).
Sent from my GT-N7000 using Tapatalk 2
Click to expand...
Click to collapse
Dont mind but any you will suggest will be good
forest1971 said:
Try with another rom or another download. Do 'clean to install' as I said and also wipe dalvik cache (under advanced menu).
Sent from my GT-N7000 using Tapatalk 2
Click to expand...
Click to collapse
Tried installing other 4.1.2 roms like paranodroid utacka but couldnt install phone reboots after opening package > installing package
might be some other isuue?
because i cant charge battery and can operate using plugin how to fix that?
even stock jb rom doesnt fix it please help me invoke your 6 senses get me a proper fix?
Please aomeone help please