hello,
I want to install a new rom (ARHD, ViperOne ...) but I always failed. The only rom that installs configuration is Guru_Reset_M7_2.24.1020.1 my HTC ONE :
***TAMPERED***
***UNLOCKED***
M7_UL PVT SHIP S-ON RH
HBOOT-1.56.0000
RADIO 4A.17.3250.14
openDSP-v32.120.274.0909
OS-4.20.1020.12
CID 247
modelid: PN0711000
youness00 said:
hello,
I want to install a new rom (ARHD, ViperOne ...) but I always failed. The only rom that installs configuration is Guru_Reset_M7_2.24.1020.1 my HTC ONE :
***TAMPERED***
***UNLOCKED***
M7_UL PVT SHIP S-ON RH
HBOOT-1.56.0000
RADIO 4A.17.3250.14
openDSP-v32.120.274.0909
OS-4.20.1020.12
CID 247
modelid: PN0711000
Click to expand...
Click to collapse
you're probably using a wrong recovery, use TWRP
2.6.3.3: http://techerrata.com/browse/twrp2/m7
or 2.6.3.4: http://techerrata.com/browse/twrp2/m7ul
(make sure MD5 is correct on your download)
fastboot flash recovery openrecovery-twrp-2.6.3.3-m7.img
fastboot erase cache
fastboot reboot-bootloader
also your modelid is incorrect, either you have an M7_UL = modelid PN0710000 or an M7_U = modelid PN0711000
next time post a "fastboot getvar all" (excluding IMEI and s/n) instead of typing stuff.
Impossible to install rom ARHD 61
thank you very much for your reply,
I installed the new recovery, I flashed the rom ARHD 61.1, but the phone is stuck on the white startup page with the logo of HTC ONE.
The configuration of my phone:
version: 0.5
version-bootloader: 1.56.0000
version-baseband: 4A.17.3250.14
version-cpld: None
version-microp: None
version-main: 4.20.1020.12
version-misc: PVT SHIP S-ON
product: m7_ul
platform: HBOOT-8064
modelid: PN0710000
cidnum: HTC__247
battery-status: good
battery-voltage: 3963mV
partition-layout: Generic
security: on
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: dirty-f6d46eca
hbootpreupdate: 11
gencheckpt: 0
Rom installed
Thank you,
I just had to update TWRP and the latest version of ARHD is installed. thank you very much
youness00 said:
thank you very much for your reply,
I installed the new recovery, I flashed the rom ARHD 61.1, but the phone is stuck on the white startup page with the logo of HTC ONE.
The configuration of my phone:
version: 0.5
version-bootloader: 1.56.0000
version-baseband: 4A.17.3250.14
version-cpld: None
version-microp: None
version-main: 4.20.1020.12
version-misc: PVT SHIP S-ON
product: m7_ul
platform: HBOOT-8064
modelid: PN0710000
cidnum: HTC__247
battery-status: good
battery-voltage: 3963mV
partition-layout: Generic
security: on
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: dirty-f6d46eca
hbootpreupdate: 11
gencheckpt: 0
Click to expand...
Click to collapse
Never mind
youness00 said:
thank you very much for your reply,
I installed the new recovery, I flashed the rom ARHD 61.1, but the phone is stuck on the white startup page with the logo of HTC ONE.
The configuration of my phone:
version: 0.5
version-bootloader: 1.56.0000
version-baseband: 4A.17.3250.14
version-cpld: None
version-microp: None
version-main: 4.20.1020.12
version-misc: PVT SHIP S-ON
product: m7_ul
platform: HBOOT-8064
modelid: PN0710000
cidnum: HTC__247
battery-status: good
battery-voltage: 3963mV
partition-layout: Generic
security: on
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: dirty-f6d46eca
hbootpreupdate: 11
gencheckpt: 0
Click to expand...
Click to collapse
how long did you wait? 61.1 takes quite a long time to boot up the first time (much longer than any previous ROM which only took 10mins or so, 61.1 took close to 20 if i remember correctly)
and you did check MD5 of 61.1 to make sure it's not corrupt right?
61.1 took not even 10 minutes to start. But how can I check if MD5 is corrupt
youness00 said:
61.1 took not even 10 minutes to start. But how can I check if MD5 is corrupt
Click to expand...
Click to collapse
took longer for me :silly:
Anyway, it it's up and running, then it's okay, the file would be good, otherwise you'd get a "failed" in TWRP or still waiting for it to boot.
but it's a good habit to check MD5 checksum, on downloads in general, to avoid being stuck because of a bad download... for example, if you try to download TWRP from their site, you can't use a download manager, it'll always give you a corrupt file (at least for me)
there are plenty of applications out there, here's a simple one http://winmd5.com/ or if you need to frequently check hashes, then http://implbits.com/hashtab.aspx is very nice.
next time you can: http://www.lmgtfy.com/?q=how+do+i+check+md5
Related
I need to flash stock rom on my htc one
please give me a firmware for my device
RELOCKED
version: 0.5
version-bootloader: 1.56.0000
version-baseband: 4A.14.3250.13
version-cpld: None
version-microp: None
version-main: 4.19.401.11
version-misc: PVT SHIP S-ON
serialno:
imei:
meid: 00000000000000
product: m7_ul
platform: HBOOT-8064
modelid: PN0710000
cidnum: HTC__J15
battery-status: good
battery-voltage: 4122mV
partition-layout: Generic
security: on
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: dirty-4dab9d12
hbootpreupdate: 11
gencheckpt: 0
alsalam4man said:
I need to flash stock rom on my htc one
please give me a firmware for my device
RELOCKED
version: 0.5
version-bootloader: 1.56.0000
version-baseband: 4A.14.3250.13
version-cpld: None
version-microp: None
version-main: 4.19.401.11
version-misc: PVT SHIP S-ON
serialno:
imei:
meid: 00000000000000
product: m7_ul
platform: HBOOT-8064
modelid: PN0710000
cidnum: HTC__J15
battery-status: good
battery-voltage: 4122mV
partition-layout: Generic
security: on
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: dirty-4dab9d12
hbootpreupdate: 11
gencheckpt: 0
Click to expand...
Click to collapse
You will need S-OFF before you can use the RUU
Ideally, you shouldn't have updated to 4.19.401.11
Try ARHD rom and use Firewater S-OFF
raghav kapur said:
You will need S-OFF before you can use the RUU
Ideally, you shouldn't have updated to 4.19.401.11
Try ARHD rom and use Firewater S-OFF
Click to expand...
Click to collapse
i was flashed ARHD rom and my device was :crying:
i need to flash my device from FASTBOOT with S-ON
can i do that?
i will flash this rom (HTC_One_-_MaximusHD_33.0.0)
or
Android_Revolution_HD-One_53.0.zip
this is good?
alsalam4man said:
i will flash this rom (HTC_One_-_MaximusHD_33.0.0)
this is good?
Click to expand...
Click to collapse
No, use ARHD 31.6
ADB sideload the ROM to the phone
raghav kapur said:
No, use ARHD 31.6
ADB sideload the ROM to the phone
Click to expand...
Click to collapse
i need stock kernel to flash on my device please :crying:
because i was flashed guru rom and the kernel was changed
(i was flashed ARHD ROM but the device not running successful>???)
(reboot always after htc logo!! )
alsalam4man said:
i need stock kernel to flash on my device please :crying:
because i was flashed guru rom and the kernel was changed
(i was flashed ARHD ROM but the device not running successful>???)
(reboot always after htc logo!! )
Click to expand...
Click to collapse
Then, wipe the phone in the Aroma installer. U'll get the ARHD kernel and ROM
thank you
Sent from my GT-I9000 using XDA Free mobile app
So I have read every thread here in this forum and I have found a lot of information, but often the solution that worked isn't described.
My issue is as follows. I have Cyanogenmod 11 on my HTC one M7 and I want to go back to sense again. I figured I could just load Android Revolution HD 82.0 • High Quality & Performance • 6.09.401.10 • 4.4.3 and run that one. Well installation runs and I can reboot as I'm asked to do. But then my phone just restarts and restarts for ever. I run a backup and now have Cyanogenmod again but is not able to put ROMs on the SD card folder.
So time for some information:
TWRP v2.8.1.0
fastboot getvar all
version: 0.5
version-bootloader: 1.57.0000
version-baseband: 4T.29.3218.08
version-cpld: None
version-microp: None
version-main: 6.09.401.10
version-misc: PVT SHIP S-ON
meid: 00000000000000
product: m7_ul
platform: HBOOT-8064
modelid: PN0710000
cidnum: HTC__Y13
battery-status: good
battery-voltage: 4142mV
partition-layout: Generic
security: on
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: dirty-6d8a0b9b
hbootpreupdate: 11
gencheckpt: 0
all: Done!
So the question is really: What to do to? Either get an official RUU installed or a custom ROM that is simular as I tried to....
Any help would be appreciated. And IF it is a thread I have missed with this exact problem I'm sorry.
anhavang said:
So I have read every thread here in this forum and I have found a lot of information, but often the solution that worked isn't described.
My issue is as follows. I have Cyanogenmod 11 on my HTC one M7 and I want to go back to sense again. I figured I could just load Android Revolution HD 82.0 • High Quality & Performance • 6.09.401.10 • 4.4.3 and run that one. Well installation runs and I can reboot as I'm asked to do. But then my phone just restarts and restarts for ever. I run a backup and now have Cyanogenmod again but is not able to put ROMs on the SD card folder.
So time for some information:
TWRP v2.8.1.0
fastboot getvar all
version: 0.5
version-bootloader: 1.57.0000
version-baseband: 4T.29.3218.08
version-cpld: None
version-microp: None
version-main: 6.09.401.10
version-misc: PVT SHIP S-ON
meid: 00000000000000
product: m7_ul
platform: HBOOT-8064
modelid: PN0710000
cidnum: HTC__Y13
battery-status: good
battery-voltage: 4142mV
partition-layout: Generic
security: on
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: dirty-6d8a0b9b
hbootpreupdate: 11
gencheckpt: 0
all: Done!
So the question is really: What to do to? Either get an official RUU installed or a custom ROM that is simular as I tried to....
Any help would be appreciated. And IF it is a thread I have missed with this exact problem I'm sorry.
Click to expand...
Click to collapse
Flash ARHD 82 with TWRP 2.6.3.3
If you found my posts helpful, no need to say thanks. There's a button for that
Danny201281 said:
Flash ARHD 82 with TWRP 2.6.3.3
If you found my posts helpful, no need to say thanks. There's a button for that
Click to expand...
Click to collapse
That was a way too easy fix... Feel like an idiot...
Well it worked !!
I installed viper one Rom and twrp, now I want install again the stock Rom only to receive the official ota. Just need the Rom or need the stock recovery too?
samarain said:
I installed viper one Rom and twrp, now I want install again the stock Rom only to receive the official ota. Just need the Rom or need the stock recovery too?
Click to expand...
Click to collapse
Stock rom (100% stock /system partition and /data/preload folder)
stock recovery
stock firmware
recovery, rom and firmware version must match together (same version) and must also match your CID and MID numbers.
alray said:
Stock rom (100% stock /system partition and /data/preload folder)
stock recovery
stock firmware
recovery, rom and firmware version must match together (same version) and must also match your CID and MID numbers.
Click to expand...
Click to collapse
I have a Europe CID and i go install this:
https://www.androidfilehost.com/?w=files&flid=25102
Need something more?
samarain said:
I have a Europe CID and i go install this:
https://www.androidfilehost.com/?w=files&flid=25102
Need something more?
Click to expand...
Click to collapse
You won't receive any ota update using these files, these are leaked firmware and software.
post the output of "fastboot getvar all"
alray said:
You won't receive any ota update using these files, these are leaked firmware and software.
post the output of "fastboot getvar all"
Click to expand...
Click to collapse
version: 0.5
version-bootloader: 1.57.0000
version-baseband: 4T.29.3218.08
version-cpld: None
version-microp: None
version-main: 6.09.401.5
version-misc: PVT SHIP S-ON
serialno: xxxxxxxxxxxxxx
imei: xxxxxxxxxxxxxxxxx
meid: 00000000000000
product: m7_ul
platform: HBOOT-8064
modelid: PN0710000
cidnum: HTC__304
battery-status: good
battery-voltage: 4274mV
partition-layout: Generic
security: on
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: dirty-6d8a0b9b
hbootpreupdate: 11
gencheckpt: 0
samarain said:
version: 0.5
version-bootloader: 1.57.0000
version-baseband: 4T.29.3218.08
version-cpld: None
version-microp: None
version-main: 6.09.401.5
version-misc: PVT SHIP S-ON
serialno: xxxxxxxxxxxxxx
imei: xxxxxxxxxxxxxxxxx
meid: 00000000000000
product: m7_ul
platform: HBOOT-8064
modelid: PN0710000
cidnum: HTC__304
battery-status: good
battery-voltage: 4274mV
partition-layout: Generic
security: on
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: dirty-6d8a0b9b
hbootpreupdate: 11
gencheckpt: 0
Click to expand...
Click to collapse
Flash this using TWRP 2.6.3.3, this is stock rom: https://www.androidfilehost.com/?fid=95916177934521009
and then flash this, this is stock recovery: https://www.androidfilehost.com/?fid=95864024717070758
you should be good to update then, the data / preload folder is included in it, ive just downloaded it and checked, and thats one of the main requirements to update.
Hello Everyone,
I have a problem with my HTC One M7.
The Rom that is/was on the phone is on OS-6.14.111.2
But in the bootloader the displayed OS is 7.18.11.2 . For the moment it's relocked but can be unlocked again. It is also S-ON and it has no working recovery.
The problems are :
- The phone boots and after the first HTC (Powered by android) screen i get a black screen, and nothing is happening here.
- I can't seem to get any working recovery on the phone (TWRP or CWM), after i flash a recovery i get the message "Entering Recovery..." a brief flash and then the message again, and then nothing happends
any idea what i'm doing wrong ? What i can try ? or do i have a beautifull new paperweight ?
Here a fastboot getvar :
version: 0.5
version-bootloader: 1.61.0000
version-baseband: 4T.35.3218.16
version-cpld: None
version-microp: None
version-main: 7.18.111.2
version-misc: PVT SHIP S-ON
serialno:
imei:
meid: 00000000000000
product: m7_ul
platform: HBOOT-8064
modelid: PN0710000
cidnum: T-MOB101
battery-status: good
battery-voltage: 3899mV
partition-layout: Generic
security: on
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: dirty-b30b07eb
hbootpreupdate: 11
gencheckpt: 0
Thank you all
Black-Panther666 said:
Hello Everyone,
I have a problem with my HTC One M7.
The Rom that is/was on the phone is on OS-6.14.111.2
But in the bootloader the displayed OS is 7.18.11.2 . For the moment it's relocked but can be unlocked again. It is also S-ON and it has no working recovery.
The problems are :
- The phone boots and after the first HTC (Powered by android) screen i get a black screen, and nothing is happening here.
- I can't seem to get any working recovery on the phone (TWRP or CWM), after i flash a recovery i get the message "Entering Recovery..." a brief flash and then the message again, and then nothing happends
any idea what i'm doing wrong ? What i can try ? or do i have a beautifull new paperweight ?
Here a fastboot getvar :
version: 0.5
version-bootloader: 1.61.0000
version-baseband: 4T.35.3218.16
version-cpld: None
version-microp: None
version-main: 7.18.111.2
version-misc: PVT SHIP S-ON
serialno:
meid: 00000000000000
product: m7_ul
platform: HBOOT-8064
modelid: PN0710000
cidnum: T-MOB101
battery-status: good
battery-voltage: 3899mV
partition-layout: Generic
security: on
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: dirty-b30b07eb
hbootpreupdate: 11
gencheckpt: 0
Thank you all
Click to expand...
Click to collapse
remove your serial no and IMEI from you post
try an older philz recovery or TWRP 2.6.3.3
Black-Panther666 said:
Hello Everyone,
I have a problem with my HTC One M7.
The Rom that is/was on the phone is on OS-6.14.111.2
But in the bootloader the displayed OS is 7.18.11.2 . For the moment it's
relocked but can be unlocked again. It is also S-ON and it has no working
recovery.
The problems are :
- The phone boots and after the first HTC (Powered by android) screen i get a
black screen, and nothing is happening here.
- I can't seem to get any working recovery on the phone (TWRP or CWM), after
i flash a recovery i get the message "Entering Recovery..." a brief flash and
then the message again, and then nothing happends
any idea what i'm doing wrong ? What i can try ? or do i have a beautifull
new paperweight ?
Here a fastboot getvar :
version: 0.5
version-bootloader: 1.61.0000
version-baseband: 4T.35.3218.16
version-cpld: None
version-microp: None
version-main: 7.18.111.2
version-misc: PVT SHIP S-ON
serialno:
imei:
meid: 00000000000000
product: m7_ul
platform: HBOOT-8064
modelid: PN0710000
cidnum: T-MOB101
battery-status: good
battery-voltage: 3899mV
partition-layout: Generic
security: on
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: dirty-b30b07eb
hbootpreupdate: 11
gencheckpt: 0
Thank you all
Click to expand...
Click to collapse
Go HERE
Download your RUU & flash it nothing more
Wanna save data flash TWRP 2.6.3.3 then 2.8.5.0 enable mtp mode connect to PC copy all data
Thank you for your quick response
It worked for the RUU part, but the recovery still isn't working.
please help my phone does not pass the logo of Android, can put a custom , but if I touch something restart or eh aid could put a ruu
S -on unloked , hboot 1.56
DiegoJhosue said:
please help my phone does not pass the logo of Android, can put a custom , but if I touch something restart or eh aid could put a ruu
S -on unloked , hboot 1.56
Click to expand...
Click to collapse
please post the output of "fastboot getvar all" (remove imei/sn)
already asked the same thing here btw
and you didn't replied...
sorry did not see in time , here my information
version: 0.5
version-bootloader: 1.56.0000
version-baseband: 4A.23.3263.28
version-cpld: None
version-microp: None
version-main: 4.19.631.9
version-misc: PVT SHIP S-ON
meid: 00000000000000
product: m7_ul
platform: HBOOT-8064
modelid: PN0712000
cidnum: ROGER001
battery-status: good
battery-voltage: 3858mV
partition-layout: Generic
security: on
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: dirty-4dab9d12
hbootpreupdate: 11
gencheckpt: 0
DiegoJhosue said:
sorry did not see in time , here my information
version: 0.5
version-bootloader: 1.56.0000
version-baseband: 4A.23.3263.28
version-cpld: None
version-microp: None
version-main: 4.19.631.9
version-misc: PVT SHIP S-ON
meid: 00000000000000
product: m7_ul
platform: HBOOT-8064
modelid: PN0712000
cidnum: ROGER001
battery-status: good
battery-voltage: 3858mV
partition-layout: Generic
security: on
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: dirty-4dab9d12
hbootpreupdate: 11
gencheckpt: 0
Click to expand...
Click to collapse
Relock your bootloader:
Code:
fastboot oem lock
then flash this RUU
http://www.htc1guru.com/2014/03/rogers-android-ruu/
ok thanks downloading , but not back to factory recovery?
DiegoJhosue said:
ok thanks downloading , but not back to factory recovery?
Click to expand...
Click to collapse
The RUU will reset your phone back to stock
thanks friend one last question I install in fastboot mode or RUU
thank you very much friend I could relive my phone I have two major problems
1- serves no wifi or bt
2- if I turn off the phone will not turn back until discharge and charging from 0%
DiegoJhosue said:
thank you very much friend I could relive my phone I have two major problems
1- serves no wifi or bt
2- if I turn off the phone will not turn back until discharge and charging from 0%
Click to expand...
Click to collapse
Looks like you have an hardware problem. Flashing a RUU should fix any software or firmware issue so its most likely the hardware.
OK thanks very much my fone went sat
Enviado desde mi SM-G900F mediante Tapatalk