[Q] Can't get any ROMs installed - One (M7) Q&A, Help & Troubleshooting

So I have read every thread here in this forum and I have found a lot of information, but often the solution that worked isn't described.
My issue is as follows. I have Cyanogenmod 11 on my HTC one M7 and I want to go back to sense again. I figured I could just load Android Revolution HD 82.0 • High Quality & Performance • 6.09.401.10 • 4.4.3 and run that one. Well installation runs and I can reboot as I'm asked to do. But then my phone just restarts and restarts for ever. I run a backup and now have Cyanogenmod again but is not able to put ROMs on the SD card folder.
So time for some information:
TWRP v2.8.1.0
fastboot getvar all
version: 0.5
version-bootloader: 1.57.0000
version-baseband: 4T.29.3218.08
version-cpld: None
version-microp: None
version-main: 6.09.401.10
version-misc: PVT SHIP S-ON
meid: 00000000000000
product: m7_ul
platform: HBOOT-8064
modelid: PN0710000
cidnum: HTC__Y13
battery-status: good
battery-voltage: 4142mV
partition-layout: Generic
security: on
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: dirty-6d8a0b9b
hbootpreupdate: 11
gencheckpt: 0
all: Done!
So the question is really: What to do to? Either get an official RUU installed or a custom ROM that is simular as I tried to....
Any help would be appreciated. And IF it is a thread I have missed with this exact problem I'm sorry.

anhavang said:
So I have read every thread here in this forum and I have found a lot of information, but often the solution that worked isn't described.
My issue is as follows. I have Cyanogenmod 11 on my HTC one M7 and I want to go back to sense again. I figured I could just load Android Revolution HD 82.0 • High Quality & Performance • 6.09.401.10 • 4.4.3 and run that one. Well installation runs and I can reboot as I'm asked to do. But then my phone just restarts and restarts for ever. I run a backup and now have Cyanogenmod again but is not able to put ROMs on the SD card folder.
So time for some information:
TWRP v2.8.1.0
fastboot getvar all
version: 0.5
version-bootloader: 1.57.0000
version-baseband: 4T.29.3218.08
version-cpld: None
version-microp: None
version-main: 6.09.401.10
version-misc: PVT SHIP S-ON
meid: 00000000000000
product: m7_ul
platform: HBOOT-8064
modelid: PN0710000
cidnum: HTC__Y13
battery-status: good
battery-voltage: 4142mV
partition-layout: Generic
security: on
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: dirty-6d8a0b9b
hbootpreupdate: 11
gencheckpt: 0
all: Done!
So the question is really: What to do to? Either get an official RUU installed or a custom ROM that is simular as I tried to....
Any help would be appreciated. And IF it is a thread I have missed with this exact problem I'm sorry.
Click to expand...
Click to collapse
Flash ARHD 82 with TWRP 2.6.3.3
If you found my posts helpful, no need to say thanks. There's a button for that

Danny201281 said:
Flash ARHD 82 with TWRP 2.6.3.3
If you found my posts helpful, no need to say thanks. There's a button for that
Click to expand...
Click to collapse
That was a way too easy fix... Feel like an idiot...
Well it worked !!

Related

[Q] Random reboots/shut downs

Hello,
I have a problem with my m7 that several times a day restart or shut down and some times only starts again with the powerbutton for 10sec. Can I find log files anywhere to see what that is?
Besides reboots, I feel that everything is working fine fine.
Configuration are:
KitKat, ViperOne 4.3.0, fw_4.19.401.8, ElementalX-m7-10.10.1.
Version: 0.5
version-bootloader: 1.56.0000
version-baseband: 4A.23.3263.28
version-cpld: None
version-MicroP: None
version-main: 4.19.401.8
version-misc: PVT SHIP S-OFF
SerialNo: XXXX
imei: XXXX
MEID: 00000000000000
product: m7_ul
Platform: HBOOT-8064
modelid: PN0710000
cidnum: 11111111
battery-status: good
battery-voltage: 4044mV
partition-layout: Generic
security: off
build-mode: SHIP
boot-mode: FAST BOOT
commitno-bootloader: dirty-4dab9d12
hbootpreupdate: 11
gencheckpt: 0
bebbej said:
Hello,
I have a problem with my m7 that several times a day restart or shut down and some times only starts again with the powerbutton for 10sec. Can I find log files anywhere to see what that is?
Besides reboots, I feel that everything is working fine fine.
Configuration are:
KitKat, ViperOne 4.3.0, fw_4.19.401.8, ElementalX-m7-10.10.1.
Version: 0.5
version-bootloader: 1.56.0000
version-baseband: 4A.23.3263.28
version-cpld: None
version-MicroP: None
version-main: 4.19.401.8
version-misc: PVT SHIP S-OFF
SerialNo: XXXX
imei: XXXX
MEID: 00000000000000
product: m7_ul
Platform: HBOOT-8064
modelid: PN0710000
cidnum: 11111111
battery-status: good
battery-voltage: 4044mV
partition-layout: Generic
security: off
build-mode: SHIP
boot-mode: FAST BOOT
commitno-bootloader: dirty-4dab9d12
hbootpreupdate: 11
gencheckpt: 0
Click to expand...
Click to collapse
Between ViperOne and ElementalX, that's a lot of settings to deal with, anything could go wrong. I would put my Phone back to stock and see if the problem persists. If the problem goes away Start over and make note of all the custom settings you choose.
The logcat can be collected from recovery using adb
as soon as the phone reboots/shuts down go into recovery and from your adb/fastboot directory type adb logcat -d > logcat.txt
bebbej said:
Hello,
I have a problem with my m7 that several times a day restart or shut down and some times only starts again with the powerbutton for 10sec. Can I find log files anywhere to see what that is?
Besides reboots, I feel that everything is working fine fine.
Configuration are:
KitKat, ViperOne 4.3.0, fw_4.19.401.8, ElementalX-m7-10.10.1.
Version: 0.5
version-bootloader: 1.56.0000
version-baseband: 4A.23.3263.28
version-cpld: None
version-MicroP: None
version-main: 4.19.401.8
version-misc: PVT SHIP S-OFF
SerialNo: XXXX
imei: XXXX
MEID: 00000000000000
product: m7_ul
Platform: HBOOT-8064
modelid: PN0710000
cidnum: 11111111
battery-status: good
battery-voltage: 4044mV
partition-layout: Generic
security: off
build-mode: SHIP
boot-mode: FAST BOOT
commitno-bootloader: dirty-4dab9d12
hbootpreupdate: 11
gencheckpt: 0
Click to expand...
Click to collapse
have you overclocked or undervolted something with that elementalx?
If yes, that's the problem.
Uxepro said:
have you overclocked or undervolted something with that elementalx?
If yes, that's the problem.
Click to expand...
Click to collapse
I had a slight undervolt and has now got back to stockvalues.
Thanx! Lets see if it helps.
clsA said:
Between ViperOne and ElementalX, that's a lot of settings to deal with, anything could go wrong. I would put my Phone back to stock and see if the problem persists. If the problem goes away Start over and make note of all the custom settings you choose.
The logcat can be collected from recovery using adb
as soon as the phone reboots/shuts down go into recovery and from your adb/fastboot directory type adb logcat -d > logcat.txt
Click to expand...
Click to collapse
Guess a lot of things can go wrong with all that. Gonna wait for ViperOne 5 and try the latest ElementalX before going back to stock.
Didnt understand anything of the logfile. But thanx for instructions. :good:
Decrypt logcat
As mentioned I have a problem with random reboots several times a day. Posting a logcat and hope to get some help decrypting it.
is it the same on stock firmware?
SaHiLzZ said:
is it the same on stock firmware?
Click to expand...
Click to collapse
Yes, it is. Never reboots while charging though....
what this type of things happens to me i stick to the basics.. redownload rom make sure it was a good download.. fresh install wipe everything cache,davlik,data.. install rom full wipe on aroma options.. then run the rom as it is maybe a halfday check if the problem is still there.. if everything is ok no reboots or whatnot after halfday or better the whole day then flash the custom kernel.. without any overclocks or undervolt.. usually this method finds the real culprit..

[Q] bootloop and recovery boot after Android Revolution HD 60.0

hi there;
i need help if some one i ll so happy..
using m7 and rooted perfectly few moutns ago. i wwas started with Android Revolution HD 30 and updated allways since that time..
today iwas at version 53. and i saw new version 60...as usual i was check my radio and firmware before rom they were old too..
so i was updated firmware with radio everything was fine. then updated ElementalX latest version.still there was no problem.
also update twrp from 2.6 to 2.7.still there was no problem.
then i flashed new Revolution 60 then evrything started. after installation on twrp as usual it askes for reboot so i am.
then i can see first boot screen. then it boots again after few seconds directly to recovery mode. cant understood what is going on.
here getvar all info as you can see i am allready soff. also i tried install new supersu 194 from fastload it was success too.
pls help i am stucked.
thnx
version: 0.5
version-bootloader: 1.56.0000
version-baseband: 4A.25.3263.21
version-cpld: None
version-microp: None
version-main: 4.19.401.11
version-misc: PVT SHIP S-OFF
serialno:
imei:
meid:
product: m7_u
platform: HBOOT-8064
modelid: PN0711000
cidnum: 11111111
battery-status: good
battery-voltage: 3980mV
partition-layout: Generic
security: off
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: dirty-4dab9d12
hbootpreupdate: 11
gencheckpt: 0
Go back to ARHD 53 then. Should post in custom ROM thread to get assistance about it
sent from my mobile device
after tried many things ive done that..and thnx god it came back with out losing any data.
i cant write over there froum doesnt allowed me.
thnx for reply by the way.
cheers

[Q] impossible to install a rom

hello,
I want to install a new rom (ARHD, ViperOne ...) but I always failed. The only rom that installs configuration is Guru_Reset_M7_2.24.1020.1 my HTC ONE :
***TAMPERED***
***UNLOCKED***
M7_UL PVT SHIP S-ON RH
HBOOT-1.56.0000
RADIO 4A.17.3250.14
openDSP-v32.120.274.0909
OS-4.20.1020.12
CID 247
modelid: PN0711000
youness00 said:
hello,
I want to install a new rom (ARHD, ViperOne ...) but I always failed. The only rom that installs configuration is Guru_Reset_M7_2.24.1020.1 my HTC ONE :
***TAMPERED***
***UNLOCKED***
M7_UL PVT SHIP S-ON RH
HBOOT-1.56.0000
RADIO 4A.17.3250.14
openDSP-v32.120.274.0909
OS-4.20.1020.12
CID 247
modelid: PN0711000
Click to expand...
Click to collapse
you're probably using a wrong recovery, use TWRP
2.6.3.3: http://techerrata.com/browse/twrp2/m7
or 2.6.3.4: http://techerrata.com/browse/twrp2/m7ul
(make sure MD5 is correct on your download)
fastboot flash recovery openrecovery-twrp-2.6.3.3-m7.img
fastboot erase cache
fastboot reboot-bootloader
also your modelid is incorrect, either you have an M7_UL = modelid PN0710000 or an M7_U = modelid PN0711000
next time post a "fastboot getvar all" (excluding IMEI and s/n) instead of typing stuff.
Impossible to install rom ARHD 61
thank you very much for your reply,
I installed the new recovery, I flashed the rom ARHD 61.1, but the phone is stuck on the white startup page with the logo of HTC ONE.
The configuration of my phone:
version: 0.5
version-bootloader: 1.56.0000
version-baseband: 4A.17.3250.14
version-cpld: None
version-microp: None
version-main: 4.20.1020.12
version-misc: PVT SHIP S-ON
product: m7_ul
platform: HBOOT-8064
modelid: PN0710000
cidnum: HTC__247
battery-status: good
battery-voltage: 3963mV
partition-layout: Generic
security: on
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: dirty-f6d46eca
hbootpreupdate: 11
gencheckpt: 0
Rom installed
Thank you,
I just had to update TWRP and the latest version of ARHD is installed. thank you very much
youness00 said:
thank you very much for your reply,
I installed the new recovery, I flashed the rom ARHD 61.1, but the phone is stuck on the white startup page with the logo of HTC ONE.
The configuration of my phone:
version: 0.5
version-bootloader: 1.56.0000
version-baseband: 4A.17.3250.14
version-cpld: None
version-microp: None
version-main: 4.20.1020.12
version-misc: PVT SHIP S-ON
product: m7_ul
platform: HBOOT-8064
modelid: PN0710000
cidnum: HTC__247
battery-status: good
battery-voltage: 3963mV
partition-layout: Generic
security: on
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: dirty-f6d46eca
hbootpreupdate: 11
gencheckpt: 0
Click to expand...
Click to collapse
Never mind
youness00 said:
thank you very much for your reply,
I installed the new recovery, I flashed the rom ARHD 61.1, but the phone is stuck on the white startup page with the logo of HTC ONE.
The configuration of my phone:
version: 0.5
version-bootloader: 1.56.0000
version-baseband: 4A.17.3250.14
version-cpld: None
version-microp: None
version-main: 4.20.1020.12
version-misc: PVT SHIP S-ON
product: m7_ul
platform: HBOOT-8064
modelid: PN0710000
cidnum: HTC__247
battery-status: good
battery-voltage: 3963mV
partition-layout: Generic
security: on
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: dirty-f6d46eca
hbootpreupdate: 11
gencheckpt: 0
Click to expand...
Click to collapse
how long did you wait? 61.1 takes quite a long time to boot up the first time (much longer than any previous ROM which only took 10mins or so, 61.1 took close to 20 if i remember correctly)
and you did check MD5 of 61.1 to make sure it's not corrupt right?
61.1 took not even 10 minutes to start. But how can I check if MD5 is corrupt
youness00 said:
61.1 took not even 10 minutes to start. But how can I check if MD5 is corrupt
Click to expand...
Click to collapse
took longer for me :silly:
Anyway, it it's up and running, then it's okay, the file would be good, otherwise you'd get a "failed" in TWRP or still waiting for it to boot.
but it's a good habit to check MD5 checksum, on downloads in general, to avoid being stuck because of a bad download... for example, if you try to download TWRP from their site, you can't use a download manager, it'll always give you a corrupt file (at least for me)
there are plenty of applications out there, here's a simple one http://winmd5.com/ or if you need to frequently check hashes, then http://implbits.com/hashtab.aspx is very nice.
next time you can: http://www.lmgtfy.com/?q=how+do+i+check+md5

[Q] Help finding RUU

I cannot seem to find the RUU for my HTC ONE to put back into stock. It's stuck in bootloop from me wiping it in TWRP on accident. I have C Spire (formerly Cellular South) ... I've searched and searched. It's S-On as well. I can flash back to custom recovery and such, but I am just trying to get back to stock... help very appreciated. Could anyone help out with finding the RUU needed, I've ran fastboot getvar, and can give any info needed.
wozabek said:
I cannot seem to find the RUU for my HTC ONE to put back into stock. It's stuck in bootloop from me wiping it in TWRP on accident. I have C Spire (formerly Cellular South) ... I've searched and searched. It's S-On as well. I can flash back to custom recovery and such, but I am just trying to get back to stock... help very appreciated. Could anyone help out with finding the RUU needed, I've ran fastboot getvar, and can give any info needed.
Click to expand...
Click to collapse
Afaik, No RUU was ever released for c-spire htc one.
post the getvar (without imei and serialno)
alray said:
Afaik, No RUU was ever released for c-spire htc one.
post the getvar (without imei and serialno)
Click to expand...
Click to collapse
version: 0.5
version-bootloader: 1.57.0000
version-baseband: 1.01.20.0109
version-cpld: None
version-microp: None
version-main:
version-misc: PVT SHIP S-ON
meid: 99000146223202
product: m7_wls
platform: HBOOT-8064
modelid: PN0720000
cidnum: UTSI_005
battery-status: good
battery-voltage: 4235mV
partition-layout: Generic
security: on
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: dirty-ae8bbb39
hbootpreupdate: 11
gencheckpt: 0
I appreciate you trying to help me out man.
wozabek said:
version: 0.5
version-bootloader: 1.57.0000
version-baseband: 1.01.20.0109
version-cpld: None
version-microp: None
version-main:
version-misc: PVT SHIP S-ON
meid: 99000146223202
product: m7_wls
platform: HBOOT-8064
modelid: PN0720000
cidnum: UTSI_005
battery-status: good
battery-voltage: 4235mV
partition-layout: Generic
security: on
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: dirty-ae8bbb39
hbootpreupdate: 11
gencheckpt: 0
I appreciate you trying to help me out man.
Click to expand...
Click to collapse
you will need to use a custom rom for sprint or s-off and flash a sprint ruu
alray said:
you will need to use a custom rom for sprint or s-off and flash a sprint ruu
Click to expand...
Click to collapse
Thanks man.

Htc M7 no inicia ayuda

please help my phone does not pass the logo of Android, can put a custom , but if I touch something restart or eh aid could put a ruu
S -on unloked , hboot 1.56
DiegoJhosue said:
please help my phone does not pass the logo of Android, can put a custom , but if I touch something restart or eh aid could put a ruu
S -on unloked , hboot 1.56
Click to expand...
Click to collapse
please post the output of "fastboot getvar all" (remove imei/sn)
already asked the same thing here btw
and you didn't replied...
sorry did not see in time , here my information
version: 0.5
version-bootloader: 1.56.0000
version-baseband: 4A.23.3263.28
version-cpld: None
version-microp: None
version-main: 4.19.631.9
version-misc: PVT SHIP S-ON
meid: 00000000000000
product: m7_ul
platform: HBOOT-8064
modelid: PN0712000
cidnum: ROGER001
battery-status: good
battery-voltage: 3858mV
partition-layout: Generic
security: on
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: dirty-4dab9d12
hbootpreupdate: 11
gencheckpt: 0
DiegoJhosue said:
sorry did not see in time , here my information
version: 0.5
version-bootloader: 1.56.0000
version-baseband: 4A.23.3263.28
version-cpld: None
version-microp: None
version-main: 4.19.631.9
version-misc: PVT SHIP S-ON
meid: 00000000000000
product: m7_ul
platform: HBOOT-8064
modelid: PN0712000
cidnum: ROGER001
battery-status: good
battery-voltage: 3858mV
partition-layout: Generic
security: on
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: dirty-4dab9d12
hbootpreupdate: 11
gencheckpt: 0
Click to expand...
Click to collapse
Relock your bootloader:
Code:
fastboot oem lock
then flash this RUU
http://www.htc1guru.com/2014/03/rogers-android-ruu/
ok thanks downloading , but not back to factory recovery?
DiegoJhosue said:
ok thanks downloading , but not back to factory recovery?
Click to expand...
Click to collapse
The RUU will reset your phone back to stock
thanks friend one last question I install in fastboot mode or RUU
thank you very much friend I could relive my phone I have two major problems
1- serves no wifi or bt
2- if I turn off the phone will not turn back until discharge and charging from 0%
DiegoJhosue said:
thank you very much friend I could relive my phone I have two major problems
1- serves no wifi or bt
2- if I turn off the phone will not turn back until discharge and charging from 0%
Click to expand...
Click to collapse
Looks like you have an hardware problem. Flashing a RUU should fix any software or firmware issue so its most likely the hardware.
OK thanks very much my fone went sat
Enviado desde mi SM-G900F mediante Tapatalk

Categories

Resources