Database Develop

[Q] HTC ONE 802D HELP PLZZ!!:crying:

I have a HTC One 802d (m7c_dwg) indian dual sim version..
I have messed it up pretty much.
I am new to XDA forum. Maybe I am not able to search well.
However, when my phone was working perfectly fine and stock it was:
version: 0.5
version-bootloader: 2.27.0000
version-baseband: 1.01.32.0917
version-cpld: None
version-microp: None
version-main: 2.23.720.2
version-misc: PVT SHIP S-ON
product: m7cdwg
platform: HBOOT-8064
modelid: PN0751000
cidnum: HTC__038
partition-layout: Generic
security: on
build-mode: SHIP
hbootpreupdate: 11
gencheckpt: 0
After this I have made a terrible mistake.
I went S-OFF and flashed this RUU. The onl;y RUU.exe i could find.
ruu_m7c_dwg_jb_50_htccn_chs_ct_1.12.1401.1_radio_1237.17.18.0423release_signed
This has changed my hboot, software no., radio everything and i am not able to get any signal on my phone.
After this i upgraded the firmware to
OTA_M7C_DWG_JB_50_S1_HTCCN_CHS_CT_2.40.1401.1-2.36.1401.1_release_339188zxf4sldwhr7k7cw8
MY condition now is:
(bootloader) version: 0.5
(bootloader) version-bootloader: 2.27.0000
(bootloader) version-baseband: 2.03.30.1025
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 2.40.1401.1
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: HT382MP00013
(bootloader) imei: 357607050351635
(bootloader) meid: A1000037A614ED
(bootloader) product: m7cdwg
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0751000
(bootloader) cidnum: HTC__038
(bootloader) battery-status: good
(bootloader) battery-voltage: 4120mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-b78ee36f
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
Still of no help. I am not getting any signal even now. Whenever i try to get back to stock via installing Nandroid backup i created when it was stock. It flashes well.
But as soon as it boots. It reboots after few seconds and keeps rebooting like that.:crying:
I dont know now what to do. I have tried flashing soul ROMs, still the same issue.
It boots up but i dont see anything on the screen, just the battery icon and no signal. it again reboots.
PLEASE HELP ME WITH THIS. I DONT KNOW WHAT TO DO NOW.
If you can post HTC One 802d indian official firmware package, it will be of great great help.!
Also, Please tell me how i can get back to S-ON as i will have to visit service center, i suppose.
Please Help!!
(I am sort of a noob, please don't mind if i sound dumb)
THANK YOU FOR YOUR HELP IN ADVANCE.

i had same problem,
my device keep bootloop after reintsalling stock..
my device HTC one 802D ( indonesia/wwe ) i think the RUU same with indian HTC One DS 802d
anyone can share the RUU ?? please :crying:

dj_rizkycore said:
i had same problem,
my device keep bootloop after reintsalling stock..
my device HTC one 802D ( indonesia/wwe ) i think the RUU same with indian HTC One DS 802d
anyone can share the RUU ?? please :crying:
Click to expand...
Click to collapse
There seems to no RUU for us brother..!
I have searched everywhere. All that is available is Chinese and European RUU only.
Only way left now is to hand it over to HTC Repair.
Please post the stock nandroid back if anyone has. Here is extra info.
version: 0.5
version-bootloader: 2.27.0000
version-baseband: 1.01.32.0917
version-cpld: None
version-microp: None
version-main: 2.23.720.2
version-misc: PVT SHIP S-ON
product: m7cdwg
platform: HBOOT-8064
modelid: PN0751000
cidnum: HTC__038
partition-layout: Generic
security: on
build-mode: SHIP
hbootpreupdate: 11
gencheckpt: 0

initeshx said:
There seems to no RUU for us brother..!
I have searched everywhere. All that is available is Chinese and European RUU only.
Only way left now is to hand it over to HTC Repair.
Please post the stock nandroid back if anyone has. Here is extra info.
version: 0.5
version-bootloader: 2.27.0000
version-baseband: 1.01.32.0917
version-cpld: None
version-microp: None
version-main: 2.23.720.2
version-misc: PVT SHIP S-ON
product: m7cdwg
platform: HBOOT-8064
modelid: PN0751000
cidnum: HTC__038
partition-layout: Generic
security: on
build-mode: SHIP
hbootpreupdate: 11
gencheckpt: 0
Click to expand...
Click to collapse
Make S-OFF with rumrunner, make super CID, Install stock Chinese ROM, then you can flash SoulROM it is okay to use with any operator.

suzdalenko said:
Make S-OFF with rumrunner, make super CID, Install stock Chinese ROM, then you can flash SoulROM it is okay to use with any operator.
Click to expand...
Click to collapse
+1 on that

suzdalenko said:
Make S-OFF with rumrunner, make super CID, Install stock Chinese ROM, then you can flash SoulROM it is okay to use with any operator.
Click to expand...
Click to collapse
criszz said:
+1 on that
Click to expand...
Click to collapse
I am already s-off and have done what you have suggested here already. Doesn't work..!!
My condition now is when i restore my stock nandroid backup and reboot the phone. I get the welcome and setup screen. (Radio is gone, so no signal whatsoever)
After i finish setup and get to the homescreen. It doesn't load. I have to tap settings and when i press home back, i see all the icons and everything as it was. The phone stays like that for few seconds and then reboots.
After it reboots, only battery, clock and cellular signals icon are visible and it stays like that for few seconds and reboots again.
Any idea whats going on??

What exactly doesn't work with suggested scheme? Does the phone boot after installing original chinese ROM?

initeshx said:
I am already s-off and have done what you have suggested here already. Doesn't work..!!
My condition now is when i restore my stock nandroid backup and reboot the phone. I get the welcome and setup screen. (Radio is gone, so no signal whatsoever)
After i finish setup and get to the homescreen. It doesn't load. I have to tap settings and when i press home back, i see all the icons and everything as it was. The phone stays like that for few seconds and then reboots.
After it reboots, only battery, clock and cellular signals icon are visible and it stays like that for few seconds and reboots again.
Any idea whats going on??
Click to expand...
Click to collapse
Hello, did you find any resolution yet? I am also stuck with the same issue. :crying:

[Q] Random reboots/shut downs

Hello,
I have a problem with my m7 that several times a day restart or shut down and some times only starts again with the powerbutton for 10sec. Can I find log files anywhere to see what that is?
Besides reboots, I feel that everything is working fine fine.
Configuration are:
KitKat, ViperOne 4.3.0, fw_4.19.401.8, ElementalX-m7-10.10.1.
Version: 0.5
version-bootloader: 1.56.0000
version-baseband: 4A.23.3263.28
version-cpld: None
version-MicroP: None
version-main: 4.19.401.8
version-misc: PVT SHIP S-OFF
SerialNo: XXXX
imei: XXXX
MEID: 00000000000000
product: m7_ul
Platform: HBOOT-8064
modelid: PN0710000
cidnum: 11111111
battery-status: good
battery-voltage: 4044mV
partition-layout: Generic
security: off
build-mode: SHIP
boot-mode: FAST BOOT
commitno-bootloader: dirty-4dab9d12
hbootpreupdate: 11
gencheckpt: 0

bebbej said:
Hello,
I have a problem with my m7 that several times a day restart or shut down and some times only starts again with the powerbutton for 10sec. Can I find log files anywhere to see what that is?
Besides reboots, I feel that everything is working fine fine.
Configuration are:
KitKat, ViperOne 4.3.0, fw_4.19.401.8, ElementalX-m7-10.10.1.
Version: 0.5
version-bootloader: 1.56.0000
version-baseband: 4A.23.3263.28
version-cpld: None
version-MicroP: None
version-main: 4.19.401.8
version-misc: PVT SHIP S-OFF
SerialNo: XXXX
imei: XXXX
MEID: 00000000000000
product: m7_ul
Platform: HBOOT-8064
modelid: PN0710000
cidnum: 11111111
battery-status: good
battery-voltage: 4044mV
partition-layout: Generic
security: off
build-mode: SHIP
boot-mode: FAST BOOT
commitno-bootloader: dirty-4dab9d12
hbootpreupdate: 11
gencheckpt: 0
Click to expand...
Click to collapse
Between ViperOne and ElementalX, that's a lot of settings to deal with, anything could go wrong. I would put my Phone back to stock and see if the problem persists. If the problem goes away Start over and make note of all the custom settings you choose.
The logcat can be collected from recovery using adb
as soon as the phone reboots/shuts down go into recovery and from your adb/fastboot directory type adb logcat -d > logcat.txt

bebbej said:
Hello,
I have a problem with my m7 that several times a day restart or shut down and some times only starts again with the powerbutton for 10sec. Can I find log files anywhere to see what that is?
Besides reboots, I feel that everything is working fine fine.
Configuration are:
KitKat, ViperOne 4.3.0, fw_4.19.401.8, ElementalX-m7-10.10.1.
Version: 0.5
version-bootloader: 1.56.0000
version-baseband: 4A.23.3263.28
version-cpld: None
version-MicroP: None
version-main: 4.19.401.8
version-misc: PVT SHIP S-OFF
SerialNo: XXXX
imei: XXXX
MEID: 00000000000000
product: m7_ul
Platform: HBOOT-8064
modelid: PN0710000
cidnum: 11111111
battery-status: good
battery-voltage: 4044mV
partition-layout: Generic
security: off
build-mode: SHIP
boot-mode: FAST BOOT
commitno-bootloader: dirty-4dab9d12
hbootpreupdate: 11
gencheckpt: 0
Click to expand...
Click to collapse
have you overclocked or undervolted something with that elementalx?
If yes, that's the problem.

Uxepro said:
have you overclocked or undervolted something with that elementalx?
If yes, that's the problem.
Click to expand...
Click to collapse
I had a slight undervolt and has now got back to stockvalues.
Thanx! Lets see if it helps.

clsA said:
Between ViperOne and ElementalX, that's a lot of settings to deal with, anything could go wrong. I would put my Phone back to stock and see if the problem persists. If the problem goes away Start over and make note of all the custom settings you choose.
The logcat can be collected from recovery using adb
as soon as the phone reboots/shuts down go into recovery and from your adb/fastboot directory type adb logcat -d > logcat.txt
Click to expand...
Click to collapse
Guess a lot of things can go wrong with all that. Gonna wait for ViperOne 5 and try the latest ElementalX before going back to stock.
Didnt understand anything of the logfile. But thanx for instructions. :good:

Decrypt logcat
As mentioned I have a problem with random reboots several times a day. Posting a logcat and hope to get some help decrypting it.

is it the same on stock firmware?

SaHiLzZ said:
is it the same on stock firmware?
Click to expand...
Click to collapse
Yes, it is. Never reboots while charging though....

what this type of things happens to me i stick to the basics.. redownload rom make sure it was a good download.. fresh install wipe everything cache,davlik,data.. install rom full wipe on aroma options.. then run the rom as it is maybe a halfday check if the problem is still there.. if everything is ok no reboots or whatnot after halfday or better the whole day then flash the custom kernel.. without any overclocks or undervolt.. usually this method finds the real culprit..

[Q] Can't get any ROMs installed

So I have read every thread here in this forum and I have found a lot of information, but often the solution that worked isn't described.
My issue is as follows. I have Cyanogenmod 11 on my HTC one M7 and I want to go back to sense again. I figured I could just load Android Revolution HD 82.0 • High Quality & Performance • 6.09.401.10 • 4.4.3 and run that one. Well installation runs and I can reboot as I'm asked to do. But then my phone just restarts and restarts for ever. I run a backup and now have Cyanogenmod again but is not able to put ROMs on the SD card folder.
So time for some information:
TWRP v2.8.1.0
fastboot getvar all
version: 0.5
version-bootloader: 1.57.0000
version-baseband: 4T.29.3218.08
version-cpld: None
version-microp: None
version-main: 6.09.401.10
version-misc: PVT SHIP S-ON
meid: 00000000000000
product: m7_ul
platform: HBOOT-8064
modelid: PN0710000
cidnum: HTC__Y13
battery-status: good
battery-voltage: 4142mV
partition-layout: Generic
security: on
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: dirty-6d8a0b9b
hbootpreupdate: 11
gencheckpt: 0
all: Done!
So the question is really: What to do to? Either get an official RUU installed or a custom ROM that is simular as I tried to....
Any help would be appreciated. And IF it is a thread I have missed with this exact problem I'm sorry.

anhavang said:
So I have read every thread here in this forum and I have found a lot of information, but often the solution that worked isn't described.
My issue is as follows. I have Cyanogenmod 11 on my HTC one M7 and I want to go back to sense again. I figured I could just load Android Revolution HD 82.0 • High Quality & Performance • 6.09.401.10 • 4.4.3 and run that one. Well installation runs and I can reboot as I'm asked to do. But then my phone just restarts and restarts for ever. I run a backup and now have Cyanogenmod again but is not able to put ROMs on the SD card folder.
So time for some information:
TWRP v2.8.1.0
fastboot getvar all
version: 0.5
version-bootloader: 1.57.0000
version-baseband: 4T.29.3218.08
version-cpld: None
version-microp: None
version-main: 6.09.401.10
version-misc: PVT SHIP S-ON
meid: 00000000000000
product: m7_ul
platform: HBOOT-8064
modelid: PN0710000
cidnum: HTC__Y13
battery-status: good
battery-voltage: 4142mV
partition-layout: Generic
security: on
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: dirty-6d8a0b9b
hbootpreupdate: 11
gencheckpt: 0
all: Done!
So the question is really: What to do to? Either get an official RUU installed or a custom ROM that is simular as I tried to....
Any help would be appreciated. And IF it is a thread I have missed with this exact problem I'm sorry.
Click to expand...
Click to collapse
Flash ARHD 82 with TWRP 2.6.3.3
If you found my posts helpful, no need to say thanks. There's a button for that

Danny201281 said:
Flash ARHD 82 with TWRP 2.6.3.3
If you found my posts helpful, no need to say thanks. There's a button for that
Click to expand...
Click to collapse
That was a way too easy fix... Feel like an idiot...
Well it worked !!

[Q] update to 7.19.401.2 no wifi, rebooting, overheating

Hello, friend of mine gave me this phone HTC M7, which is after update (OTA) to latest 5.0.2 ROM rebooting, no wifi signal.
I managed to install custom recovery (TWRP 2.8.5.0)
I tried to instal "Guru_Reset_M7_2.24.401.1.zip", the phone didnot reboot but the wifi was not working, so I tried latest custom rom (maximusHD 52.0.0.)
but still get no wifi (when i tap on wifi button it greyed and thats it) and the phone rebooting all the time.
I think there is problem with the radio. Is it possible to download and flash trough TWRP only the latest radio? And if yes, where do i find it?
what i got now:
htc sense 6.0
software: maximusHD 52.0.0
baseband: 4A.17.3250.14_10.39.1150.04L
build: 7.19.401.2 CL482424 release keys
hboot info:
tampered/unlocked
M7_UL PVT SHIP S-ON RH
HBOOT 1.61
RADIO 4A.17.3250.14 -i think here is the problem, because this radio is from Guru_Reset_M7_2.24.401.1.zip. The original radio before i start to mess with this was 4T.35.3218.16
Open DSP v35.120.274.0718
OS 7.19.401.2
The poit is to have working phone, so no need to have the latest build/Sense, just working phone.
Thanx for help

please help
So i managed to download the full RUU zip file of latest 7.19.401.2 .
I flashed it usinf "fastboot flash zip RUU.zip" and before i locked the bootloader.
ROM flashed ok
but after reboot and settings i still cannot enable wifi and when the phone is going to turn off the screen or i press power to turn off the screen the phone reboots.
Please help.
get var all info:
version: 0.5
version-bootloader: 1.61.0000
version-baseband: 4T.35.3218.16
version-cpld: None
version-microp: None
version-main: 7.19.401.2
version-misc: PVT SHIP S-ON
product: m7_ul
platform: HBOOT-8064
modelid: PN0710000
cidnum: HTC__032
battery-status: good
battery-voltage: 4187mV
partition-layout: Generic
security: on
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: dirty-0e2a13e5
hbootpreupdate: 11
gencheckpt: 0

DallasCZ said:
So i managed to download the full RUU zip file of latest 7.19.401.2 .
I flashed it usinf "fastboot flash zip RUU.zip" and before i locked the bootloader.
ROM flashed ok
but after reboot and settings i still cannot enable wifi and when the phone is going to turn off the screen or i press power to turn off the screen the phone reboots.
Please help.
get var all info:
version: 0.5
version-bootloader: 1.61.0000
version-baseband: 4T.35.3218.16
version-cpld: None
version-microp: None
version-main: 7.19.401.2
version-misc: PVT SHIP S-ON
product: m7_ul
platform: HBOOT-8064
modelid: PN0710000
cidnum: HTC__032
battery-status: good
battery-voltage: 4187mV
partition-layout: Generic
security: on
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: dirty-0e2a13e5
hbootpreupdate: 11
gencheckpt: 0
Click to expand...
Click to collapse
Well if you have flashed a ruu and you still have this issue, its probably an hardware problem. You'll probably have to send it for repair.

No Rom and no Recovery what to do ? (HTC One M7)

Hello Everyone,
I have a problem with my HTC One M7.
The Rom that is/was on the phone is on OS-6.14.111.2
But in the bootloader the displayed OS is 7.18.11.2 . For the moment it's relocked but can be unlocked again. It is also S-ON and it has no working recovery.
The problems are :
- The phone boots and after the first HTC (Powered by android) screen i get a black screen, and nothing is happening here.
- I can't seem to get any working recovery on the phone (TWRP or CWM), after i flash a recovery i get the message "Entering Recovery..." a brief flash and then the message again, and then nothing happends
any idea what i'm doing wrong ? What i can try ? or do i have a beautifull new paperweight ?
Here a fastboot getvar :
version: 0.5
version-bootloader: 1.61.0000
version-baseband: 4T.35.3218.16
version-cpld: None
version-microp: None
version-main: 7.18.111.2
version-misc: PVT SHIP S-ON
serialno:
imei:
meid: 00000000000000
product: m7_ul
platform: HBOOT-8064
modelid: PN0710000
cidnum: T-MOB101
battery-status: good
battery-voltage: 3899mV
partition-layout: Generic
security: on
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: dirty-b30b07eb
hbootpreupdate: 11
gencheckpt: 0
Thank you all

Black-Panther666 said:
Hello Everyone,
I have a problem with my HTC One M7.
The Rom that is/was on the phone is on OS-6.14.111.2
But in the bootloader the displayed OS is 7.18.11.2 . For the moment it's relocked but can be unlocked again. It is also S-ON and it has no working recovery.
The problems are :
- The phone boots and after the first HTC (Powered by android) screen i get a black screen, and nothing is happening here.
- I can't seem to get any working recovery on the phone (TWRP or CWM), after i flash a recovery i get the message "Entering Recovery..." a brief flash and then the message again, and then nothing happends
any idea what i'm doing wrong ? What i can try ? or do i have a beautifull new paperweight ?
Here a fastboot getvar :
version: 0.5
version-bootloader: 1.61.0000
version-baseband: 4T.35.3218.16
version-cpld: None
version-microp: None
version-main: 7.18.111.2
version-misc: PVT SHIP S-ON
serialno:
meid: 00000000000000
product: m7_ul
platform: HBOOT-8064
modelid: PN0710000
cidnum: T-MOB101
battery-status: good
battery-voltage: 3899mV
partition-layout: Generic
security: on
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: dirty-b30b07eb
hbootpreupdate: 11
gencheckpt: 0
Thank you all
Click to expand...
Click to collapse
remove your serial no and IMEI from you post
try an older philz recovery or TWRP 2.6.3.3

Black-Panther666 said:
Hello Everyone,
I have a problem with my HTC One M7.
The Rom that is/was on the phone is on OS-6.14.111.2
But in the bootloader the displayed OS is 7.18.11.2 . For the moment it's
relocked but can be unlocked again. It is also S-ON and it has no working
recovery.
The problems are :
- The phone boots and after the first HTC (Powered by android) screen i get a
black screen, and nothing is happening here.
- I can't seem to get any working recovery on the phone (TWRP or CWM), after
i flash a recovery i get the message "Entering Recovery..." a brief flash and
then the message again, and then nothing happends
any idea what i'm doing wrong ? What i can try ? or do i have a beautifull
new paperweight ?
Here a fastboot getvar :
version: 0.5
version-bootloader: 1.61.0000
version-baseband: 4T.35.3218.16
version-cpld: None
version-microp: None
version-main: 7.18.111.2
version-misc: PVT SHIP S-ON
serialno:
imei:
meid: 00000000000000
product: m7_ul
platform: HBOOT-8064
modelid: PN0710000
cidnum: T-MOB101
battery-status: good
battery-voltage: 3899mV
partition-layout: Generic
security: on
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: dirty-b30b07eb
hbootpreupdate: 11
gencheckpt: 0
Thank you all
Click to expand...
Click to collapse
Go HERE
Download your RUU & flash it nothing more
Wanna save data flash TWRP 2.6.3.3 then 2.8.5.0 enable mtp mode connect to PC copy all data

Thank you for your quick response
It worked for the RUU part, but the recovery still isn't working.