Does anyone know how to install the lasted kernel posted by maromi?
I get stuck in a boot loop installing the no override and override versions 3/27.
Sent from my Amazon Tate using Tapatalk
Latest'
Sent from my Amazon Tate using Tapatalk
Mr. Xplosion Man said:
Latest'
Sent from my Amazon Tate using Tapatalk
Click to expand...
Click to collapse
Most have been doing this. I got one to boot but I had to work hard at it. The way to flash is to just dirty flash and wipe dalvick and cache after. If you get a fail then flash a nandroid or Hashcode 1.5 GHz kernel and repeat with next kernel. I like a fresh start when testing even though dirty flashing the next test kernel should be fine.
Sent from my Nexus 7 Flo running Odex SinLess ROM 4.4.2 with ElementalX kernel using XDA Premium 4 mobile app
Where do I get hashcodes 1.5 ghz kernel?
Sent from my Amazon Tate using Tapatalk
Related
ok, been a while since i flashed my galaxy and forgotten stuff. running darkys 10.2 extreme with cwm. can i just flash something else over the top via cwm?
cheers
Sent from my Transformer Prime TF201 using XDA Premium HD app
anthonyexmouth said:
ok, been a while since i flashed my galaxy and forgotten stuff. running darkys 10.2 extreme with cwm. can i just flash something else over the top via cwm?
cheers
Sent from my Transformer Prime TF201 using XDA Premium HD app
Click to expand...
Click to collapse
What rom version will you be flashing?
Tapatalking in my sleep
When you do a factory reset and the kernel fits to the Android version of the new ROM, why not?
Update your CWM when your not on the latest one, nandroid backup, factory reset, wipe cache, flash whatever you want, be happy
Hello everybody
I have used to flash old cm9 releases without any problems
But new releases starting from June enters a boot loop
I flashed stock with odoin and used a pit file and wiped everything and flashed cm9 and cm10 but again boot loop
n.b. aokp milestone 6 worked
I don't know where is the problem
Sent from my GT-P7300 using xda premium
zeema said:
Hello everybody
I have used to flash old cm9 releases without any problems
But new releases starting from June enters a boot loop
I flashed stock with odoin and used a pit file and wiped everything and flashed cm9 and cm10 but again boot loop
n.b. aokp milestone 6 worked
I don't know where is the problem
Sent from my GT-P7300 using xda premium
Click to expand...
Click to collapse
Are you also formatting /system before flashing?
Yes I also tried this
Sent from my GT-P7300 using xda premium
zeema said:
Yes I also tried this
Sent from my GT-P7300 using xda premium
Click to expand...
Click to collapse
After ODINing back to Stock, did you do a factory reset using the Stock Recovery? Yes, the one that makes you lose everything in the tablet including SDcard contents.
nirogu325 said:
After ODINing back to Stock, did you do a factory reset using the Stock Recovery? Yes, the one that makes you lose everything in the tablet including SDcard contents.
Click to expand...
Click to collapse
Yes I did
Sent from my GT-P7300 using xda premium
zeema said:
Yes I did
Sent from my GT-P7300 using xda premium
Click to expand...
Click to collapse
Are you using CWM Recovery v.6.0.0.0?
Actually I tried many versions starting with 5.1.0 and 5.5.0.4 and 6.0.0 I'dont where is the problem
Sent from my GT-P7300 using xda premium
i was having this problem with aokp ics so i back to 3.2 and wait for a new version of aokp ics and it is solved with the new version
so the rom solved it self
sorry for my english
mmostafanyw said:
i was having this problem with aokp ics so i back to 3.2 and wait for a new version of aokp ics and it is solved with the new version
so the rom solved it self
sorry for my english
Click to expand...
Click to collapse
Off-topic, but AOKP Milestone 6 will be the last ICS-based AOKP as evidenced here.
Again I successfully flashed the AOSP JB by safariking but it has some errors so I m back again to overcome 2.3.1
Sent from my GT-P7300 using xda premium
Still the same with every new cm10 releases
Kalte_kaffe should have look on this
Sent from my GT-P7300 using xda premium
If i follow this steps is there any chance to brick my phone?
I want to install paranoid android build 5 .
1. Make a backup
2. Clear cache
3.Clear davlik
4.Format /system
5.Install zip from sdcard
I want to install this custom rom only if there are 100% no chances to brick my phone
Sent from my LG-P990 using Tapatalk
There isn't 100 percent change to have succeed. Anyway LG is hard to brick. I successfully changed my rom but after 2 weeks it got huge problems nd cannot mount partition.
After clearance by NVflash all problems gone.
If you aren't coming from PA rom, and wipe data petition also.
Sent from LG 2X using Tapatalk 2 Elite
I have stock rom v20s
Sent from my LG-P990 using Tapatalk
Then you need to do a full wipe.
Sent from my Optimus 2X using xda app-developers app
I understand your hesitance I felt the same way.. untilled I successfully did it.. first one I tried was cm7 official build used the same steps u list but got a boot loop (this is not a brick as u can still access recovery) .. anyway I had to nvflash the rom and it worked and I now change Tom's all the time just to test and mess about with .. its easy and there is plenty of support available ... good luck
Sent from my Optimus 2X using xda app-developers app
So what do you say? Should i do it?
Sent from my LG-P990 using Tapatalk
ViliRO said:
So what do you say? Should i do it?
Sent from my LG-P990 using Tapatalk
Click to expand...
Click to collapse
I did it recently, with exact same rom and I love it!
And what about the Gapps? I flash them after i flash the rom? I have to do a full wipe again?
Sent from my LG-P990 using Tapatalk
ViliRO said:
And what about the Gapps? I flash them after i flash the rom? I have to do a full wipe again?
Sent from my LG-P990 using Tapatalk
Click to expand...
Click to collapse
Gapps are flashed after the rom without a full wipe in between.
Sent from my LG-SU660 using xda premium
I have an Incredible S. I have flashed the official rom 4.0.4 with kernel version 3.0.16 g2271fd09. I was able to go over 1Ghz. Even though i think that 1Ghz CPU is more than enough on Android 4.0.4, it is very laggy and the situation is terrible. I need to go over 1Ghz like I did on other custom roms. I do not want to install a custom ROM because I do not know what they contain and I dont trust them. I just need to flash a custom kernel, and boot up the phone with the ability to go over 1Ghz (overclock). Any custom kernels (not ROMS) that you have tried and work with Android 4.0.4 ??
alrosh7 said:
I have an Incredible S. I have flashed the official rom 4.0.4 with kernel version 3.0.16 g2271fd09. I was able to go over 1Ghz. Even though i think that 1Ghz CPU is more than enough on Android 4.0.4, it is very laggy and the situation is terrible. I need to go over 1Ghz like I did on other custom roms. I do not want to install a custom ROM because I do not know what they contain and I dont trust them. I just need to flash a custom kernel, and boot up the phone with the ability to go over 1Ghz (overclock). Any custom kernels (not ROMS) that you have tried and work with Android 4.0.4 ??
Click to expand...
Click to collapse
Try beastmode kernel from the blackout ICS thread. You need to have a custom recovery though
Sent from my Nexus 7 using xda app-developers app
markj338 said:
Try beastmode kernel from the blackout ICS thread. You need to have a custom recovery though
Sent from my Nexus 7 using xda app-developers app
Click to expand...
Click to collapse
In the instructions it says:
Instructions:
Install from recovery (TWRP ONLY)
Then reboot!
What is TWRP ??
alrosh7 said:
In the instructions it says:
Instructions:
Install from recovery (TWRP ONLY)
Then reboot!
What is TWRP ??
Click to expand...
Click to collapse
Team win recovery. Any custom recovery works fine though
Beast mode is my favourite for performance
Sent from my Nexus 7 using xda app-developers app
markj338 said:
Team win recovery. Any custom recovery works fine though
Beast mode is my favourite for performance
Sent from my Nexus 7 using xda app-developers app
Click to expand...
Click to collapse
I have just installed it, but nothing happened. I went through the installation, chose 2.1Ghz max freq, everything seemed to be working fine, got no error messages, but now when I go into Voltage Control (oveclock app) I still see a 1Ghz max freq!! Help Please!!
alrosh7 said:
I have just installed it, but nothing happened. I went through the installation, chose 2.1Ghz max freq, everything seemed to be working fine, got no error messages, but now when I go into Voltage Control (oveclock app) I still see a 1Ghz max freq!! Help Please!!
Click to expand...
Click to collapse
Are you s-on? You might have to fast boot flash. What does it say for kernel version in settings?
Sent from my Incredible S using xda app-developers app
markj338 said:
Are you s-on? You might have to fast boot flash. What does it say for kernel version in settings?
Sent from my Incredible S using xda app-developers app
Click to expand...
Click to collapse
I am on S-ON, and the kernel version has not changed in the settings. I do not think I will need to S-OFF as I managed to take it up to 1.5Ghz with CM7. And the link you sent me says, that, that beastmode version is for HTC ONE X.
alrosh7 said:
I am on S-ON, and the kernel version has not changed in the settings. I do not think I will need to S-OFF as I managed to take it up to 1.5Ghz with CM7. And the link you sent me says, that, that beastmode version is for HTC ONE X.
Click to expand...
Click to collapse
Flash this one here
http://forum.xda-developers.com/showthread.php?p=33998854
You will have to go to video.ardes's thread and see his instructions in his 3rd post or something for flashing in fastboot for s on users.
His thread is for xs-kernel ICS. I guess you could try his kernel if you want
Sent from my Nexus 7 using xda app-developers app
A while back, I tried to flash Arrgghh's latest CM 10.2 kernel (Aug 21) on CM 10.2 ROM. I ended up with a black screen on reboot, and now I'm a bit wary about flashing it. I didn't clear Cache and Dalvik Cache beforehand though, is that reason why? I've been wanting to flash this kernel on a lot of the 4.3 ROMs but I'm kinda scared after the last time and need some clarification. BTW, I got the kernel off of the Photon Q 4G LTE thread. Also, under what conditions can a custom kernel hard brick your phone? I was under the impression that kernel flashing can't hard brick, just fastboot a different boot.img, right?
I'm running it fine on the latest pac.
Sent from my PACMAN MATRIX HD MAXX
deeje00 said:
I'm running it fine on the latest pac.
Sent from my PACMAN MATRIX HD MAXX
Click to expand...
Click to collapse
Where did you download the kernel from? If it works on PAC it should work on any other 4.3 ROM, right?
I got my file from here: http://forum.xda-developers.com/showthread.php?t=1893050
Neighbor808 said:
Where did you download the kernel from? If it works on PAC it should work on any other 4.3 ROM, right?
I got my file from here: http://forum.xda-developers.com/showthread.php?t=1893050
Click to expand...
Click to collapse
I'm having this issue as well. Ibwant to overclock my 4.3 ROM but I get stuck at boot
Sent from my MB886 using XDA Premium 4 mobile app
I also get a blank screen on his newest, and possibly the 15th, but the 14th works fine for me.
Eruditass said:
I also get a blank screen on his newest, and possibly the 15th, but the 14th works fine for me.
Click to expand...
Click to collapse
Do you have a download link?
Sent from my MB886 using XDA Premium 4 mobile app
SVLAN said:
Do you have a download link?
Sent from my MB886 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=31717152&postcount=5
As long as none of the versions of his CM 10.2 kernel are able to hard brick my phone, i'll try out different ones and see which I can get to boot.
New Aug 31 build of the kernel is running just fine for me, Wheatley governor is great!