[Firmware] Droid X (MB810) 2.3.4/4.5.621 - Radio Removed - Droid X Android Development

For Advanced Users only till I get some feedback.
For those DX users on a non-verizon network
I removed the Radio/ Baseband files from 1FF-p3a_shadow_cdma_shadow-user-2.3.4-4.5.1_57_DX8-51-120111-test-keys-signed-Verizon-US.sbf
and repacked with Portable Sbf Tool.zip
This will allow you the flash 2.3.4/4.5.621 with rsd lite, without needing to re-flash radio to cricket, metroPCS...
This will not change the radio to cricket, metroPCS...
Please Do Not Use this if you do not know how to Flash Radio to your Carrier, should this fails.
Download 2.3.4.4.5.621.no.radio.sbf.zip
Mega
Dev-Host
androidfilehost
Just Flash like the normal sbf, it just skips the reflash of the radio.
Follow my [How-To] Flash .SBF/Firmware with RSD Lite
My Testing and restoring Verizon radio settings
1. Flashed Alltel Radio with, 1FF-p3a_shadow_cdma_shadow-user-2.3.5-4.5.1_57_MX2-34-111019-release-keys-signed-alltel-US.sbf with RSD Lite
which changed Stock DX 2.3.4 BaseBand (Radio) from BP_c_01.09.15p to alltel's BP_C_02.12.00R along with changing the rest of the firmware to the Milestone X.
2. Flashed my 2.3.4.4.5.621.no.radio.sbf.zip with RSD Lite
Firmware changed back to stock Droid X 2.3.4/4.5.621 except Baseband BP_C_02.12.00R remained.
3. Flashed Verizon Radio with, Full 1FF-p3a_shadow_cdma_shadow-user-2.3.4-4.5.1_57_DX8-51-120111-test-keys-signed-Verizon-US.sbf, and changed to stock Droid X Baseband BP_C_01.09.15p .
Note: Droid X screen went completely dark during this last step, but RSD Lite continued to show progress and phone booted normally.
change log:
30 March 2014 Grammer, Dev-Host link, AndroiFileHost link, Portable Sbf Tool.zip link
03 April 2014 reworded

I'm not using a network anyways so I can give this a shot
Sent from my Nexus 7 using Tapatalk

Nexus11 said:
I'm not using a network anyways so I can give this a shot
Sent from my Nexus 7 using Tapatalk
Click to expand...
Click to collapse
Thanks, but it's the network radio settings I'm not sure about.
I didn't time it,but it seemed to flash faster than full sbf.

Related

VZW EC02 Files

I've looked at a guide on gizmoninja to take a VZW Tab to stock DJ11, then allow the new EC02 update to run, and then flash the Heimdall files for EC02. My question is why let the update run and then flash the EC02 files? Why not just flash the EC02 files? Is it because those Heimdall files are already rooted, is that the difference? I'd like to get to the EC02 update so I can use the Bluetooth capabilities. Or would a different/custom ROM be better?
As a background, my Tab was originally branded for US Cellular that I flashed to stock VZW DJ11. I then did a manual root. I haven't been able to get the update to run and I've flashed 2 different "stock" files.
Any advice would be greatly appreciated!!
hmm, I have a rooted version of DJ11 installed presently, and I have no problem with Bluetooth transfers. As such, I don't think that you need EC02 in order to use it, unless I am missing something. Originally, I did install EC02 via the update, and was able to root it through superoneclick. I decided to revert back to DJ11 for the time being though, as I had installed a custom kernal and it was causing me to have a lot of force close issues.
As for rooting EC02, a lot of people have reported issues. There was some kind of bootloader change in that update that screwed things up. Perhaps that is why the guide suggests installing the update and then flashing a rooted rom.
I soft bricked my vzw tab yesterday. I was on ec02, but didn't know that the rotation fix file had to be unzipped. Did it twice, third time I just used the ec02 and flashed the new kernel after. Unzipped the fix this time! Haven't had a problem yet. Seems way more responsive. Since ec02 has all the files needed there is no reason to go backwards, it works without doing the dj11 steps.
Sent from my SCH-I800 using XDA Premium App
Thanks!
Thanks for the input. I guess I'll take the plunge and just flash the EC02 files and see what happens....? I'll report back. BTW, Hammer, where is the rotation fix file that you mentioned? I hadn't seen any mention about a fix. Or maybe I just missed it in my quick glances!
Here...post #609
http://forum.xda-developers.com/showthread.php?t=941781&page=61
Sent from my SCH-I800 using XDA Premium App
I have a uscc tab flashed with the verizon stock rom, and the ec02 update errors at about %30. I think its because the baseband is still at dj29. I think I still have the uscc modem still loaded, because the verizon stock restore tut I followed did not have me flash a modem file. I could use either the verizon moden file and try to flash that, or if anyone has the files to restore ec02 to flash straight over. Can someone on a verizon tab tell me what their baseband is along with the corresponding build id?
Sent from my SCH-I800 using Tapatalk
Got it to work!
I finally took the plunge and just flashed the rooted EC02 files from gizmoninja and it worked perfectly! The Tab rebooted normally and I was on EC02. All my programs were still there and I was still rooted. I didn't have any issue with the screen reorienting when I turned it and it seems faster. I was also able to pair and use my "old" ThinkOutside/iGo folding bluetooth keyboard!
Here is the progression of device data:
Original:
Model SCH i800 NSU
Hardware version SCH-800.0.3
Firmware version 2.2
Baseband ver S:I800.0.3K.DJ29
Kernel 2.6.32.9
Build SCH-I800.DJ29
After flashing to stock DJ11 from tutorials here at XDA and rooting via a combination of SuperOneClick and manually via ADB:
Model SCH i800
Hardware version SCH-I800.0.3
Firmware version 2.2
Baseband ver S:I800.0.3K.DJ29
Kernel 2.6.32.9 [email protected] #3
Build SCH-I800.DJ11
After flashing the rooted EC02 files from gizmoninja:
Model SCH-i800
Hardware version SCH-I800.0.3
Firmware version 2.2
Baseband ver S:I800.0.3K.DJ29
Kernel 2.6.32.9 [email protected] #3
Build SCH-I800.EC02
As I said in the OP, I started with a Tab branded for US Cellular and now I have a Tab that looks just like a VZW one! BTW, I use my Tab WiFi only; no data plan or cellular to worry about.
Hope this helps!

[Q] Can't seem to get back to stock[Shadowmod]

Alrighty so I didn't backup(only got backups with shadowmod). I can't seem to revert back to stock 2.2. I'm currently using Shadowmod (build 7). Tried flashing different(UK, Brazil, Canada) sbf files but all of them failed ....
I live in Canada btw, which is why I tested sbf file for Canada.
Why do I want to go back to stock? My signal is UBERLY crappy after installing Shadowmod. Like 99% of the time I have no signal.
I have Milestone(not sure if it's UK version or not, but it's not signed to Verizon).
Shadowmod Build:
ShadowMOD-BR v2.3b7
Kernel Version:
2.6.32.9-gafbfc43
Model Number: (Says on settings, though I swear it was a different number before)
A853
fudgestix said:
Alrighty so I didn't backup(only got backups with shadowmod). I can't seem to revert back to stock 2.2. I'm currently using Shadowmod (build 7). Tried flashing different(UK, Brazil, Canada) sbf files but all of them failed ....
I live in Canada btw, which is why I tested sbf file for Canada.
Why do I want to go back to stock? My signal is UBERLY crappy after installing Shadowmod. Like 99% of the time I have no signal.
I have Milestone(not sure if it's UK version or not, but it's not signed to Verizon).
Shadowmod Build:
ShadowMOD-BR v2.3b7
Kernel Version:
2.6.32.9-gafbfc43
Model Number: (Says on settings, though I swear it was a different number before)
A853
Click to expand...
Click to collapse
Failed with which message error?
Sent from my Milestone using XDA Premium App
Try changing the sbf file to a one-letter word like a.sbf or something and place it on the C:/ drive.
Sent from my Milestone using xda premium
fudgestix said:
I live in Canada btw, which is why I tested sbf file for Canada.
Why do I want to go back to stock? My signal is UBERLY crappy after installing Shadowmod. Like 99% of the time I have no signal.
Click to expand...
Click to collapse
try changing baseband in OR to telus , if you wanna keep Shadowmod of course.

stock fxz for bionic

does anyone have a link to the stock fxz? Ive bricked my bionic and the one for download here will not work for some reason.
did you install the drivers as well?
What download link "here" are you talking about? I was about to link you the one from here, as it worked just fine for me. It only works if you didn't install any of the OTA leaks. If you go to About Phone and your "Baseband version" has 05.15.02 at the end, you can't FXZ because you upgraded the kernel and radio.
[FXZ] Droid Bionic Stock 5.5.1_84_DBN-55
Turned out to be the computer I was using. I switched to my older vista laptop and it flashed right away. Thanks for the help.

Downgrading firmware droid bionic

I just received a new stock non-rooted droid bionic. The phone is running the latest 902 firmware. Everything works fine except wifi, I keep getting a wifi error and had to reboot the phone Several times to get it to work only once. Im thinking this is a software issue and wanted to try and downgrade the firmware using rsd lite,(specifically to the 832 firmware) is it possible to downgrade the firmware weather i root or not? And if so how do I go about it because rsd lite will not let me flash the older firmware on stock. Any help with this issue and even the wifi would be great.
Search for path saver don't know where the link is but I am sure its around some where
Sent from my AXI0M IONIC using XDA App

Help Falshing XT883

Hi,
I upgrade to 906 then downgrade to 890 by using 1 click SBF method work like charm, but I can't install XT883 get error RSD lite in first step FAIL ? I think this method help to downgrade but not completely that's why I can't flash XT883 ROM. Before upgrading to 906, I can easily flash XT883 ROM with RSD lite 5.6.
And also saw this thread but I can't understand the XML coding part I'm totally new.
Can body just help me to flashing XT883, So I can run both network CDMA and GSM because there is no other ROM which can run both network in my knowledge
Close the thread issue solved myself
no need to close the thread, maybe you want to share, how you solved the problem or people with a similar issue will come along.
@NIGHTMARE-
Please help me out. I want to flash XT883 ROM on 906.
Thanks.
kapilthio said:
@NIGHTMARE-
Please help me out. I want to flash XT883 ROM on 906.
Thanks.
Click to expand...
Click to collapse
Hello, I have flashed XT883 on XT862 successfully through the following steps.
(1) Apply 1-Click flash to downgrade from .906 to .890
(2) Download MOTO XT883_ROM 2.3.6-SLNCT-60.3.250.zip. Unzip it to a folder 'A'.
(3) Unzip the 1-Click flash to another folder 'B'.
(4) Copy the content of folder 'A' to a new folder 'C'.
(5) Copy boot, cdt, recovery of folder 'B' into folder 'C' >> Replace them.
(6) Reboot into Fastboot. Check your Fastboot version is 0A.53.
(7) Flash using the XML in folder 'C'.
The screen will reboot and it will take between 10 - 15 minutes to get up.
Once up, leave the Network as 'Global' or 'CDMA'. Do not choose 'GSM'.
Go to APN and set your operator settings.
That's it!
The above worked for me. Unfortunately the network is unstable. It often switch down my 3G and remains in 2G network. Frustrating.
If someone knows how to remains in 3G network. Kindly shared with us!

Categories

Resources