Database Develop

Stumped....Maybe you guys can help. Or maybe not

I have 2 nook colors one for me and one for my girlfriend, I am/was running CM 7 on them. Its been awhile since ive updated them. Ive tried the newest nightly and the latest STABLE release. Both got hung up on the same spot. The green CM logo will say its loading then it will go into a black screen lit by the backlight and just hangs there. no boot animation, no boot loop. Just sits there. Or It will just reboot itself back into clockwork after saying it installed the rom. Ive used the CWM removal and that made it just hung on a nook bootup screen.
Ive let it sit for 15 minutes and nothing. Im not new as ive rooted my og droid, my dx and 2 nook colors. I havent really had this issue with the nooks. not really sure what to do. Ive wiped data/cache formatted the symsted, data and cache and nothing.
My steps are as follows.
1)Download either Phiremod test 7 or ANY CM nightly
2) plug my data sdcard into my computer and transfer
3)boot into clockwork
4)Wipe pretty much everything (I also tried installing on top of the stable releases)
5)Install.
I know to expect issues but there HAS to be something im doing wrong that lets one nook install flawlessly and another nook that wont install any nightly or test build. If it didnt boot up they wouldnt leak the nightly. Its something on my end. I gotta figure it out
I also just went back to stock and re-rooted and I have the same issue

oman0123 said:
I have 2 nook colors one for me and one for my girlfriend, I am/was running CM 7 on them. Its been awhile since ive updated them. Ive tried the newest nightly and the latest STABLE release. Both got hung up on the same spot. The green CM logo will say its loading then it will go into a black screen lit by the backlight and just hangs there. no boot animation, no boot loop. Just sits there. Or It will just reboot itself back into clockwork after saying it installed the rom. Ive used the CWM removal and that made it just hung on a nook bootup screen.
Ive let it sit for 15 minutes and nothing. Im not new as ive rooted my og droid, my dx and 2 nook colors. I havent really had this issue with the nooks. not really sure what to do. Ive wiped data/cache formatted the symsted, data and cache and nothing.
My steps are as follows.
1)Download either Phiremod test 7 or ANY CM nightly
2) plug my data sdcard into my computer and transfer
3)boot into clockwork
4)Wipe pretty much everything (I also tried installing on top of the stable releases)
5)Install.
I know to expect issues but there HAS to be something im doing wrong that lets one nook install flawlessly and another nook that wont install any nightly or test build. If it didnt boot up they wouldnt leak the nightly. Its something on my end. I gotta figure it out
I also just went back to stock and re-rooted and I have the same issue
Click to expand...
Click to collapse
You probably have the wrong bootloader and kernel...the newest cm7s are based on the 2.6.32, not the older 2.6.29 (or something), and the newest 1.2 bootloader..which you probably don't have if it's "been awhile"..lol...You have to upgrade your Cwm first, from 3.0.1.0 to 3.0.2.8, I think, then flash your Cwm to a nightly after 86??(Google to check), and it will change your boot partition to the correct one...If your nook still says "touch the future", you're on the wrong bootloader.....Also, quit using Phiremod.....it's a copy of Cm7 first of all, but by the time it's released, it's already outdated, it's not updated like it should be, and it's Douchey. Google the basics of what I described above if it sounds like that might be your problem and lmk how it works out for you....Btw....I used nightly 106 for this exact thing on another of my Nooks a few days ago and it worked flawlessly...There are newer nightlies out, but that one for sure worked.....
Sent from my NookColor using Tapatalk

I might be confused; Is one of your Nooks OK or are they both refusing to boot anything based on the .32 Linux kernel?
As I read it you aren't having trouble loading either with 7.0.3 stable. Correct?
The only thing I could suggest is loading the stable version, downloading the latest nightly CM (skip Phiredrop's theme for now) DIRECTLY to the SD card (skip the computer step), and do a factory reset and format boot, system, data, and cache (all four).
Load just the nightly and gapps (save the OC kernel for later), and then see if THAT boots all the way up.
Of course make sure you have a full backup of the stable OS install before you start.
If none of that works, then prepare the SD card as an install card and try that. Do you have just the one card?

Thanks for the replies....I thought 3.2.0.1 was the newest clockwork? I guess I need to pay more attention to the nook. lmao Mazook I think you are on the right track. Also to the phiremod is that the og droid equivalent to UD? hahahaha I actually liked the look of phiremod but i digress...
On that note I installed the uboot 1.2 and flashed it and it still boots into clockwork but that maybe because I may be on an outdated cwm im the one i stated above

DiDGR8 said:
I might be confused; Is one of your Nooks OK or are they both refusing to boot anything based on the .32 Linux kernel?
As I read it you aren't having trouble loading either with 7.0.3 stable. Correct?
The only thing I could suggest is loading the stable version, downloading the latest nightly CM (skip Phiredrop's theme for now) DIRECTLY to the SD card (skip the computer step), and do a factory reset and format boot, system, data, and cache (all four).
Load just the nightly and gapps (save the OC kernel for later), and then see if THAT boots all the way up.
Of course make sure you have a full backup of the stable OS install before you start.
If none of that works, then prepare the SD card as an install card and try that. Do you have just the one card?
Click to expand...
Click to collapse
Ive tried all of that. hopefull mazooks way works. Otherwise im out of ideas

oman0123 said:
Thanks for the replies....I thought 3.2.0.1 was the newest clockwork? I guess I need to pay more attention to the nook. lmao Mazook I think you are on the right track. Also to the phiremod is that the og droid equivalent to UD? hahahaha I actually liked the look of phiremod but i digress...
On that note I installed the uboot 1.2 and flashed it and it still boots into clockwork but that maybe because I may be on an outdated cwm im the one i stated above
Click to expand...
Click to collapse
If I remember correctly, you can't just jump from 3.0.0.6 or 3.0.1.0 to newest...there's one in between that transitions the upgrade in bootloaders...I'm pretty sure I went 3.0.1.0 to 3.0.2.8 to flashing Cm7 nightly 106...then to upgrade to Cwm 3.2.0.1 while in Rom manager, while using Cm7....leSigh....Clockworkmod is the only thing I can't stand about using my Nook....(though I rarely need it any more) AmonRa is such a better (and fully functional) recovery build...One thing I wish we had gotten.....
Sent from my NookColor using Tapatalk

What I did was....
back to stock today.
re-rooted.
installed Rom manager
Flashed Clockwork
It gave me 3.0.2.1
I searched for 3.0.2.8 and got posts back in december. Which one is it that i want?

oman0123 said:
What I did was....
back to stock today.
re-rooted.
installed Rom manager
Flashed Clockwork
It gave me 3.0.2.1
I searched for 3.0.2.8 and got posts back in december. Which one is it that i want?
Click to expand...
Click to collapse
While in Rom Manager, go to "flash older clockworckmod recoveries ".....then choose 3.0.2.8 (Make a nandroid first) and have all the stuff you want to flash ready to go on the SD...then go into recovery from Rom Manager, which will put you in 3.0.2.8......if that doesn't do it, try the same thing again, but go to 3.0.1.0 first....then, once you get into a working cm7 with 3.0.1.0, try it all again.(upgrade to 3.0.2.8 by" try it all again" , but this time from 3.0.1.0)...you're basically trying to reinstall your boot partition, but in a different location than where it is now...its a hassle, but you can do it through just rom manager.....it's just a hassle...
Sent from my NookColor using Tapatalk

mazook98 said:
While in Rom Manager, go to "flash older clockworckmod recoveries ".....then choose 3.0.2.8 (Make a nandroid first) and have all the stuff you want to flash ready to go on the SD...then go into recovery from Rom Manager, which will put you in 3.0.2.8......if that doesn't do it, try the same thing again, but go to 3.0.1.0 first....then, once you get into a working cm7 with 3.0.1.0, try it all again.(upgrade to 3.0.2.8 by" try it all again" , but this time from 3.0.1.0)...you're basically trying to reinstall your boot partition, but in a different location than where it is now...its a hassle, but you can do it through just rom manager.....it's just a hassle...
Sent from my NookColor using Tapatalk
Click to expand...
Click to collapse
Well Id love to try that but.....My nook wont turn on. It was fully charged today. Im either gonna make a bootable cwm or go back to stock and root again. I dont know if that will work though because its not even powering up.

Ok....i think im making progess....The newest nightly just goes into a bootloop. better than a clockwork bootloop i guess..... any advice on how to get it to install properly? i feel like im making progress. normal bootloops are better than what i was getting

Bueller............Bueller lmao.
Seriously though.....if anybody can figure this out it would make my year

Try this, install stock 1.2....
boot it up, go through the annoying setup, log into google apps, then power down.
Boot into CWR SD, this should have the os that you want already on it, and the google apps file.
THen click install from zip, choose zip, install the OS, after complete install google apps, then restart without sd
Do not format anything, it should do the trick.

Nook is stuck, tried everything

My NC is about six months old (long before the "blue dot"). I've rooted it and wiped it and installed at least three versions of CM7, two of Phiremod's (one CM7 based and one MIUI) and two versions of MIUI. Never had a problem. Now I do. For some reason, and I can't even figure out what I did, my Nook will not boot. It hangs at the Cyanogen logo screen (not the blue circled Android, just a simple green logo). I used CWM (newest version) to boot into recovery and wiped everything, then reinstalled CM7. Hangs at the same place. I used CWM to boot into recovery, went to mounts and reformatted everything, then manually rebooted, then reinstalled CM7. Hangs at the same place. I reformatted everything and tried installing MIUI 1.85. Hangs at the same place. I reformatted everything, rebooted, wiped everything, then installed nook-complete-restore-1.0.1.zip to try to get it back to stock. Boots to the "N" and then HANGS! WTF?? I must be missing something but I can't figure out what. Help!

Maybe try a different version of cwr? create a bootable sdcard with cm7 and then run ROM manager, there is an option to install older versions of cwr
Sent from my ADR6400L using Tapatalk

I used CWM (newest version) to boot into recovery and wiped everything, then reinstalled CM7.
Click to expand...
Click to collapse
What version might that be? The latest is 3.2.0.1.......

Try a different SD card or writing a different image to the card. I had the same problems you are describing. I used eyeballers image (sorry I don't have the link) and I finally got things to.work
Sent from my NookColor using XDA Premium App

Help! Meday!! Phone Reboots into cwm

Hi All,
I am in desperate need of help.
I have a nexus s. rooted, with cyanogenmod kernel and slimbean rom.
My friend has a galaxy s1 that had unrooted froyo.
A friend of his rooted it, and put gingerbread on it. I wanted to put slimbean on it for him.
I did so.
Except, that his mobile network wouldnt connect.
I googled, and found that this could be because the kernel is not compatible with the rom.
So I downloaded cyanogenmod kernel and flashed.
But this didnt work, because I think the download was corrupted or something.
I tried to re boot into clockwork, but it just got stock on the first loading screen.
Since then I have tried everything and have been googling for hours... I dont know what to do. I have tried so many different things.
Please can some guru help me figure out what to do?
My friend is pissed as hell at me, I told him it will be painless quick and easy. Thats how it was for me and i assumed same for him.
PLEASE!! I need HELP!! :'(
Edit: I reflashed semaphore and it now goes into cwm. But now when I flash the rom and reboot it, it just reboots automatically into cwm again. Anyone know where to go from here?
Thanks in advance,
Zeddicus

zeddicus0 said:
Edit: I reflashed semaphore and it now goes into cwm. But now when I flash the rom and reboot it, it just reboots automatically into cwm again. Anyone know where to go from here?
Thanks in advance,
Zeddicus
Click to expand...
Click to collapse
It appears to be a bootloop. That means flashing messed with boot partition and you have to reflash boot. Is this phone i9000 or i9001?
Search for similar topics like: http://forum.xda-developers.com/showthread.php?t=1590747
If you can get to CWM or download mode nothing bad happend - you can repair everything, however it would be wise if you had backup of previous, working ROM

Calm down its fixable first you try to fix it without Odin by
- flashing slim bean again don't forget full wipe flash i9000.zip twice the first time it will reboot half way through at least it did for me
-then pull out the battery and boot into cwm
- flash both slim bean files
- this should get the phone starting again after that to get network working flash this file in cwm http://www.mediafire.com/?fbgxblhbip7bkuv it should get network running credit goes to pwneman for that
Let me know how it goes
Sent from my GT-I9000

First of all, thank u guys very much for helping me.
right now i am having an even bigger problem.
all of a sudden sometime between my flashing, i started getting this error when trying to mount the external card from cwm
unable to write to ums lunfile (no such file or directory)
so cant flash anything from phone now...
its an i9000

zeddicus0 said:
First of all, thank u guys very much for helping me.
right now i am having an even bigger problem.
all of a sudden sometime between my flashing, i started getting this error when trying to mount the external card from cwm
unable to write to ums lunfile (no such file or directory)
so cant flash anything from phone now...
its an i9000
Click to expand...
Click to collapse
Try to format your sdcard in fat32 filesystem (through Windows/CWM or any other various ways if this won't work)
Also try other sdcard...
If formatting card doesn't fix the problem try to reflash CWM via Odin in Download mode.

ok i did a hard reset and left batt out for a good few min and got the sdcard back again.
i followed the steps u said latrop and it didnt fix it... still booted back into cwm...
since i now have the sdcard back i am making a backup zip file of it just in case lol

@divibyzero
i followed that post but it didnt fix the problem

OK you will have to flash with Odin I'll get back to you with instructions
Sent from my GT-I9000
---------- Post added at 08:54 AM ---------- Previous post was at 08:45 AM ----------
OK follow the in this website and use the new sourceforge mirror http://www.darkyrom.com/index.php?threads/odin-darkyrom-10-2-resurrection-gti9000.4272/
Make sure you have the Samsung drivers installed http://forum.xda-developers.com/showthread.php?t=961959/ then once that's done phone should start up if it does follow my previous instructions
Sent from my Awesome GT-I9000 using Slim Bean

Wait, before you odin flash:
Let me get this straight, your rom .zip is on your external sd card? it has to be in your internal sd card.
From the recovery main menu, go to mounts & storage. From there, plug in your phone to your computer and select "Mount internal USB storage."
You'll be able to then copy the rom file into your internal sd card. While you're at it, I'd recommend X-Bean, as it's currently faster and more stable than SlimBean. Then, unmount your phone and return to the recovery menu and select install zip and choose the file you've just copied.
Please let me know how it goes.

@kngroo
thats what i did.. ive flashed tons of roms and kernels before on my nexus s...
its this galaxy s 1 that isnt working for some reason... it was meant to be a quick and painless proceedure which has turned into a nightmare
gonna probably have to format the sdcard now :*(

Hi All,
I wanna give a SERIOUS thank you to latrop.
This guy is a freaking legend. He just sat with me for almost 2 hours helping me sort out the phone. We did almost everything you can think of and then some... But ultimately it was latrops great experience and knowledge that helped save my ass here...
Phone is running full on slimbean rom with great reception etc.
Latrop... you are a legend!!!

Just wipe/factory reset and wipe cache
its work for me and maybe it would work with you too

HELP! - Stuck booting to Recovery after trying to flash CM10 :(

Hi,
I flashed my GT-i9000 (Firmware was Gingerbread BUJVY) using CF Root (CF-Root-XW_NEE_JVH-v3.2-CWM3RFS.tar) through ODIN.
All worked fine and I was able to boot into Recovery using the regular Volume Up+Home+Power.
I then proceeded to flash CM10 nightly (23/9/12) (from my external Micro SD card) by wiping data, wiping cache and wiping Dalvik Cache.
I then navigated to the zip file for CM10 and run it. It started ok then qiuckly the phone rebooted and rebooted into a newer version of CWM (6.0.1.4).
From here I cannot do anything at all!! It won't recognise my Micro SD now to even run the installation again
I'm hoping someone may be able to help, I would really appreciate it!
TIA!

zim_zimmer said:
It started ok then qiuckly the phone rebooted and rebooted into a newer version of CWM (6.0.1.4). From here I cannot do anything at all!! It won't recognise my Micro SD now to even run the installation again
Click to expand...
Click to collapse
Do you know what version is your Firmware? is it 2.3.3 or 2.3.6?, IF its 2.3.3 your boot loader needs to be updated to 2.3.6 for you use , If its already 2.3.6, than you should be able to use CWM recovery to reinstall the CM 10 from your SD card. (But by doing this you may lose your IMEI as you should do a progressive upgrade , like from GB 2.3.6>ICS CM9>JB) or flash a semaphore JB kernel
Easiest way out would be for you to use a JVU ROM to recover, safe your EFS, than proceed to CM 9 and than to CM 10...
you can get a rescue kit or JVU+CFRoot from My Android Collections and or a solution from My Android Solutions

Hi there,
I was on Gingerbread 2.3.6 before I ran the above.
I have gotten a bit further than the above. I managed to mount the phone as a USB whilst in CWM and put the CM10 zip file on the actual phone memory. I then wiped data/cache/dalvik and rerun the install. It installed but didn’t reboot itself, so I rebooted manually and then the Cyanogenmod logo started up and it booted into CM10. Looked ok apart from the Home Button didn’t work!!
Do you think I should still run the above??
Rooting this phone and flashing ROMS is more difficult than my Galaxy S3!!
Cheers

zim_zimmer said:
Looked ok apart from the Home Button didn’t work!!
Do you think I should still run the above??
Click to expand...
Click to collapse
Since you are already on CM 10, you need to solve your home button problem, try doing a wipe in recovery, if fails, flash again the CM 10

Hmmm, it didn’t work.
What I’ve done since though is try to flash another ROM.
I’ve flashed the ‘xBean’ ROM with success, however, I did encounter the exact same problem when flashing the ROM as mentioned above
I wiped data/cache/dalvik and run the install for xBean. It stopped after the first install attempt and rebooted itself, however it just brought me back to the CWM screen (although this time different from the CM CWM).
So I wiped data/cache/dalvik, then run the install again. This time it went through the full install but again (like with CM) it didn’t rebooted automatically. I manually rebooted and then the xBean logo came up and booted in.
This time the home button is working, and pretty much everything else is too by the looks of it. So far so good!
I guess my question would be, why does the ‘ghost installs’ keep happening???

[Q] HELP!!! Cappy Dead Or Alive?? any hope??

i have been running slim bean latest till date for some time now on my Captivate. few days back in the morning while i was playing music, my phone freezed for about 30 seconds and suddenly restarted. the problem is that the phone cant even boot. once it loads the kernel image and enters the bootanimation for about 10 seconds, it will keep rebooting till infinity. i left the phone for hours and flashed another Jb rom through the external sd card. after about 4 hours, the phone freezed and restarted with the same circling restart again. i left it for hours longer than before and succeeded in flashing ics rom. this time around, the phone freezed and restarted as usual in 1 hr. i tried to go back to stock gb which i did with heimdall one click package. after flashing the phone rebooted in recovery with errors that cant mount sd card and so on. i flashed an ics kernel luckily for me i was able to access the sd card this time around and flashed an ics rom. within 10nmins the phone freezed and restarted as usual. from here was the last i got progress with this phone. if i succeed in getting into recovery, i will get an error cant mount sd card likewise cant mount ext sd card. the condition of my phone now is that it never enters recovery no matter what i flash all it does, is restart in 2 - 3 secs whether in recovery or not. please what is the solution to this problem. is the chip responsible for mounting sd cards in the phone's main board dead or alive? because each time i manage to see sd card again, the content is always untouched.

so_iccy said:
i have been running slim bean latest till date for some time now on my Captivate. few days back in the morning while i was playing music, my phone freezed for about 30 seconds and suddenly restarted. the problem is that the phone cant even boot. once it loads the kernel image and enters the bootanimation for about 10 seconds, it will keep rebooting till infinity. i left the phone for hours and flashed another Jb rom through the external sd card. after about 4 hours, the phone freezed and restarted with the same circling restart again. i left it for hours longer than before and succeeded in flashing ics rom. this time around, the phone freezed and restarted as usual in 1 hr. i tried to go back to stock gb which i did with heimdall one click package. after flashing the phone rebooted in recovery with errors that cant mount sd card and so on. i flashed an ics kernel luckily for me i was able to access the sd card this time around and flashed an ics rom. within 10nmins the phone freezed and restarted as usual. from here was the last i got progress with this phone. if i succeed in getting into recovery, i will get an error cant mount sd card likewise cant mount ext sd card. the condition of my phone now is that it never enters recovery no matter what i flash all it does, is restart in 2 - 3 secs whether in recovery or not. please what is the solution to this problem. is the chip responsible for mounting sd cards in the phone's main board dead or alive? because each time i manage to see sd card again, the content is always untouched.
Click to expand...
Click to collapse
Getting in download mode and flashing KK4 through Odin is your best bet atm. Once that's done, keep it that way (only get the apps you need) and see if it reboots again. If so, it is most likely a hardware issue but I'm thinking it isn't so far.
I would also suggest to redownload the ROMs and kernel you want to use and delete the hold ones.
If everything goes well with KK4, move up to a custom ROM (I'm sure you know the drill). But once again, only install the apps you really need (fresh install instead of restoring). A bit of a slow process but better be safe than sorry.

BWolf56 said:
Getting in download mode and flashing KK4 through Odin is your best bet atm. Once that's done, keep it that way (only get the apps you need) and see if it reboots again. If so, it is most likely a hardware issue but I'm thinking it isn't so far.
I would also suggest to redownload the ROMs and kernel you want to use and delete the hold ones.
If everything goes well with KK4, move up to a custom ROM (I'm sure you know the drill). But once again, only install the apps you really need (fresh install instead of restoring). A bit of a slow process but better be safe than sorry.
Click to expand...
Click to collapse
Thanks for replying but KK4 is the exact stock rom i flashed, two different types of it to be precise. it wont boot aswell as it restarts just like any other and says sd error in its recovery.

so_iccy said:
Thanks for replying but KK4 is the exact stock rom i flashed, two different types of it to be precise. it wont boot aswell as it restarts just like any other and says sd error in its recovery.
Click to expand...
Click to collapse
Do you use a external SD?
Usually flashing stock KK4 (through heimdall of Odin) will completely wipe any errors that isn't hardware related.
Just to be clear, KK4 flashes just fine but on the auto-reboot, it goes directly into recovery and gives you that error? If so, are you able to factory reset once you're in recovery?
Usually, after flashing KK4, the phone will fully start so something isn't flashing right. Also, have you tried flashing KK4 with the bootloaders?

BWolf56 said:
Do you use a external SD?
Usually flashing stock KK4 (through heimdall of Odin) will completely wipe any errors that isn't hardware related.
Just to be clear, KK4 flashes just fine but on the auto-reboot, it goes directly into recovery and gives you that error? If so, are you able to factory reset once you're in recovery?
Usually, after flashing KK4, the phone will fully start so something isn't flashing right. Also, have you tried flashing KK4 with the bootloaders?
Click to expand...
Click to collapse
i did exactly that.that is flashing the KK4 rom through heimdall as my cappy refused to be detected by odin since i flashed heimdall. it flashed ust fine and booted to recovery
this is the error i got
-- Copying media files . . .
E:failed to mount /sdcard (No such file or directory)
E:copy_dbdata_media:Can't mount /sdcard
your storage not prepared yet. please use UI menu
for format and reboot actions
Media files copy failed
-- Wiping data . . .
formatting /data. . .
E:format_volume: rfs format failed on /dev/block/mmcblkop2
Formatting /dbdata. . .
Formatting /cache.
-- Applying Multi -CSC. . .
Installing Multi -CSC
Applied the CSC-code 'ATT'.
Succesfully applied muli-CSC
this is the error i got on the recovery after flashing and it booted into recovery on its own. i have an external sd card. i also copied a custom rom to my external sd card and flashed an ICS recovery that enables intallation of zip files from external sd card. but when i succed in booting into recovery with it, it will give me error can't mount sd card likewise error cant mount external sd card. this is as far i can go

Did u ever see the "Encryption Unsuccessful" screen ? That's what ur problem sounds like. There r two threads in the Dev forum about that subject.
Sent from my SGH-I897 using xda premium

so_iccy said:
i did exactly that.that is flashing the KK4 rom through heimdall as my cappy refused to be detected by odin since i flashed heimdall.
Click to expand...
Click to collapse
I believe I mentionned this before but Odin won't work on the same USB port Heimdall installs it's drivers on. You need to use a different port for both. Also, on a PC, I would highly suggest using the ports in the back for Odin (somehow they always seem to work better).
so_iccy said:
it flashed ust fine and booted to recovery
this is the error i got
-- Copying media files . . .
E:failed to mount /sdcard (No such file or directory)
E:copy_dbdata_media:Can't mount /sdcard
your storage not prepared yet. please use UI menu
for format and reboot actions
Media files copy failed
-- Wiping data . . .
formatting /data. . .
E:format_volume: rfs format failed on /dev/block/mmcblkop2
Formatting /dbdata. . .
Formatting /cache.
-- Applying Multi -CSC. . .
Installing Multi -CSC
Applied the CSC-code 'ATT'.
Succesfully applied muli-CSC
this is the error i got on the recovery after flashing and it booted into recovery on its own. i have an external sd card. i also copied a custom rom to my external sd card and flashed an ICS recovery that enables intallation of zip files from external sd card. but when i succed in booting into recovery with it, it will give me error can't mount sd card likewise error cant mount external sd card. this is as far i can go
Click to expand...
Click to collapse
If you're able to mount through recovery, put the ROMs and kernel you want to flash on your internal SD (16gb). I'm not so sure why it won't read your external but it might be what's causing the errors. So once you moved those (if you're able to mount of course), turn off your phone, remove your external SD and give it another try. Kinda a shot in the dark but we're running short on options here.
4-2ndtwin said:
Did u ever see the "Encryption Unsuccessful" screen ? That's what ur problem sounds like. There r two threads in the Dev forum about that subject.
Sent from my SGH-I897 using xda premium
Click to expand...
Click to collapse
I though about that too but flashing KK4 (through Odin or Heimdall) should take care of it and atleast let him boot on stock. I guess it is worth a try tho!

wow. u wont believe this. after sending my last message, i flashed KK4 again just for luck, i got the error as usual. i now did a factory reset, got an error though and rebooted the system. to my greatest surprise and for the first time, it booted to stock and started up without problem. i did a full format of the hard drive immediately as it was almost full. now i've been running the phone for 5 hrs now. and has not experienced any freeze so far.
as for the encryption unsuccessful, YES i've seen it twice. i will read on that and see what might have happened. thanks guys.

so_iccy said:
wow. u wont believe this. after sending my last message, i flashed KK4 again just for luck, i got the error as usual. i now did a factory reset, got an error though and rebooted the system. to my greatest surprise and for the first time, it booted to stock and started up without problem. i did a full format of the hard drive immediately as it was almost full. now i've been running the phone for 5 hrs now. and has not experienced any freeze so far.
as for the encryption unsuccessful, YES i've seen it twice. i will read on that and see what might have happened. thanks guys.
Click to expand...
Click to collapse
Sweet, glad it worked out! :good:

My phone suddenly dead 10 minutes ago :|,same problem with so_iccy :|

KaKaShiHp said:
My phone suddenly dead 10 minutes ago :|,same problem with so_iccy :|
Click to expand...
Click to collapse
Read what we wrote. the solution is there.
Sent from my SGH-I897 using xda app-developers app

i ran the stock rom for 3 days in my cappy and decided to flash cyanogen ics rom. after about 18 hrs, i got the freeze and restart once again. then i flashed back to kk4 yet i didnt see the sd card just as last experienced. after about 6 hrs, i flashed KK4 again and booted normally. at the moment am biased. please is there a way to root kk4 the easy way. the threads i saw in the forum didnt work. i will just have to stick with stock GB. all i need now is how to root this KK4. thanks y'all for the help so far.

so_iccy said:
i ran the stock rom for 3 days in my cappy and decided to flash cyanogen ics rom. after about 18 hrs, i got the freeze and restart once again. then i flashed back to kk4 yet i didnt see the sd card just as last experienced. after about 6 hrs, i flashed KK4 again and booted normally. at the moment am biased. please is there a way to root kk4 the easy way. the threads i saw in the forum didnt work. i will just have to stick with stock GB. all i need now is how to root this KK4. thanks y'all for the help so far.
Click to expand...
Click to collapse
Flashing Corn Kernel with Odin 1.85 will root your phone.

BWolf56 said:
Flashing Corn Kernel with Odin 1.85 will root your phone.
Click to expand...
Click to collapse
i did that before and did'nt acquire root access. but am counting on ya word, will try it again thanks

so_iccy said:
i did that before and did'nt acquire root access. but am counting on ya word, will try it again thanks
Click to expand...
Click to collapse
Perhaps you can re-download the kernel. I believe it has a specific root version.

BWolf56 said:
Perhaps you can re-download the kernel. I believe it has a specific root version.
Click to expand...
Click to collapse
it works now. thanks

Yep KK4 Corn Kernel has the ability to give u Root through its avanced menu in the its cwm recovery. Or [Utility] KK4 Easy Root by Red_81 in the Dev forum works as well.
Sent from my SGH-I897 using xda premium