i recently bought a bell xperia z1, went on to the sony website to unlock bootloader to find that mine is locked, unlike the international version which has an unlockable bootloader.
ive updated it to see if the updates would unlock the bootloader but alas they did not, now im running :
model c6906
android 4.3
build 14.2.A.0.209
Main question :
Will i be able to downgrade and bypass the bootloader?
ive rooted a S2/Htc HD/ Desire Z in the past im just worrying about bricking my phone that ive had for less then a week.
and all other guides ive seen are for different versions, ive heard of flashing the 6903 stuff but that makes me worry way to much.
so pretty much want to know is it possible to do via downgrade to achieve root or should i just wait till a safer method becomes available.
sony bloatware is annoying
Yes, you can get C6906 Rooted with Locked Bootlader. First you have Read a bit more about it, starting with this thread and also watch the Video Tutorial.
You have to use Flashtool v0.9.15 to downgrade to .534 using Rogers FTF for your model from here.
When you are on 4.2.2 FW .534 Root it with Bin4ry Method, then Install Dualrecovery, SuperSU and Upgrade to your favorite latest Android Pre-Rooted, like KitKat Here or JB 4.3 Here.
Done.
Good Luck!
you sir are the man, followed the video and got root, now to find a rom to use.
edit : went to install a rom + gapps and had to do the whole process over again. right from flashing nuts custom. got stuck in a sony logo boot loop. zz
so attempt #2 with a different rom.
edit 2: was able to update to 4.4 kitkat so now i hope i can update my rom. since i was trying to do a 4.4 rom on the 4.3 firmware ?
edit3: nope stuck on sony logo so went back to nuts again... hrmm well atleast i could upate to 4.4 going to try boot to cwm and see if that works
Before I flashed mine I was reading for weeks, You did in few hours and I think to quickly. If the phone stuck in Boot logo, I think you did something wrong but I don't have the phone with me so I cannot tell.
Now you have to go back to stock, keep pushing Volume UP and Power, 3 vibrations, phone in off, keep pushing volume down and connect to pc in flashmode, flash a Stock FTF for your model from the link I give you. Now you phone should boot. Repeat the process to get Root and be careful.
Remember to Wipe Data, Appslog, Cache, every time you flash a Fresh Installation is recommended.
eclyptos said:
keep pushing volume down and connect to pc in flashmode, flash a Stock FTF for your model from the link I give you. .
Click to expand...
Click to collapse
You should not connect the phone to the PC until the PC prompts you after flashtool has prepared the files for flashing
sorvis said:
since i was trying to do a 4.4 rom on the 4.3 firmware ?
Click to expand...
Click to collapse
4.4 will need a 4.4 kernel.
gregbradley said:
You should not connect the phone to the PC until the PC prompts you after flashtool has prepared the files for flashing
Click to expand...
Click to collapse
Ok, that is why I saw in Flashtool Disconnect and Connect my device few times but never had a problem. Good to know.
i was able to go back and use flash tool to flash nut's ftf
so im on 4.4 kitkat rooted which is good.
but when i flash any custom rom trough any recovery it boot loops im guessing its because locked bootloader.
so im guessing any rom i want to flash has to have 2 parts. The flashing process in recovery and the flashtool flash firmware for that rom.
unless like you said update my kernal
Related
Hello,
I have an Xperia Z1 - C6906 with a locked bootloader from Bell Mobility in Canada, I am wondering if there is any ROMs that support this model, and if so is there any caveats that I need to be award of for this model when flashing something that isn't an officially released version.
Regards
I'm using Monxdified 4.2.2 version (not 4.3) on my Bell 6906, no problem at all. Just follow the instructions.
Instruction on how to flash this ROM
monXdifedZ-Honami-257_v02-00-07.zip
ruinkhan said:
I'm using Monxdified 4.2.2 version (not 4.3) on my Bell 6906, no problem at all. Just follow the instructions.
Instruction on how to flash this ROM
monXdifedZ-Honami-257_v02-00-07.zip
Click to expand...
Click to collapse
I keep seeing you need to flash the firmware and kernel for your model, that isn't separate/done after flash - you just flash with the official firmware and then exclude it in flashtool?
I don't think its really worth it in my mind. If flashing custom roms, especially kernals is something you want sell your locked z1 c6906 and opt for one directly from Sony.ca which will be fully unlocked. If we can ever get root on locked bl and 4.3 then you can just "trim off the fat" apps with titanium and make it alot lighter running. I'm in the same boat as you with a 6906 from Bell. Was totally unaware of the locked bootloader lockdown before I bought it and I am suffering the consequence now. 6906's are still going for anywhere from $500-550 locally here so I think I am going to put it up for sale.
Anyways, just thought id share my thoughts as I'm in the same situation as you.
Cheers
magwart said:
I keep seeing you need to flash the firmware and kernel for your model, that isn't separate/done after flash - you just flash with the official firmware and then exclude it in flashtool?
Click to expand...
Click to collapse
Yeah, what I did was downloaded .257 Canadian version and after I flashed monxified ROM in recovery I flashed Kernel and Baseband of canadian .257 version in flashtool.
ruinkhan said:
Yeah, what I did was downloaded .257 Canadian version and after I flashed monxified ROM in recovery I flashed Kernel and Baseband of canadian .257 version in flashtool.
Click to expand...
Click to collapse
I am currently on .290 unbranded (I flashed it previously), I don't have the option right now of selling or changing phones so I am stuck with the locked boot loader at the moment. I am wanting to flash Pure Stock so I can get rid of all the bloat.
However the instructions state that I need to be on .534 to get root and install recovery. A couple questions - a.) the only 906 version of .534 is branded Rogers - would this cause any issue with my Bell phone. b.) as I am on .290 with a locked boot loader is there any issue with flashing to an older version?
magwart said:
I am currently on .290 unbranded (I flashed it previously), I don't have the option right now of selling or changing phones so I am stuck with the locked boot loader at the moment. I am wanting to flash Pure Stock so I can get rid of all the bloat.
However the instructions state that I need to be on .534 to get root and install recovery. A couple questions - a.) the only 906 version of .534 is branded Rogers - would this cause any issue with my Bell phone. b.) as I am on .290 with a locked boot loader is there any issue with flashing to an older version?
Click to expand...
Click to collapse
Nope no issues with Rogers .537 at all. I've been flashing that ftf all the time. However, I would suggest staying away from .290 ROMs for now, because my first Xperia Z1 got bricked badly with ihackers 2.0 (.290) ROM. I had to buy a new one until this gets fixed (cant stay without a phone). I'm enjoying .257 ROM (with full root access) at the moment and not looking to jump into Rooted .290 unless I'm %100 it wont brick my device again.
So I've been playing around the last week or so with my 6906, and a 6806....
I've been able to root and install the recovery easy enough on a the generic .534 build that is in the FTF thread. I believe it's the rogers one... So it does seem to pull some of the bell crap out... Putting the twrp backup data back on, gives me some of the apps back, but it doesn't seem quite as bad. At least you can then uninstall it if you don't want it. <G>
However, I've been trying to get up to the .290 builds that Nut has been providing. However, on every attempt I've been getting to a soft brick, when I use the flashtool to put the Kernel and baseband on.... Reflashing the .534 build at that point, gets me up and running again without any issue.
There is a generic 290, and new 132 build for the canadian 6906 that have been posted, but no root.... If you want stock and no mods.....
I haven't tried anything else at this point, since I'm still getting my feet wet.
Hey guys I hate to resurrect this thread but can you point me in the right direction on finding a stock Bell FTF. Even any old ones that I can upgrade to after. I tried a generic CANADA one but for some reason its still show as a US after a flashtool. I need to go back to stock to send my 9606 in for warranty and dont want them to blame the firmware for hardware issues.
Any help would be greatly appreciated
thanks
Hello,
I recently bricked my Z1 and just got it back from warranty repaired. It is a C6906 that they upgraded to 4.3 (.290) however it is branded to BELL and I wish to flash the unbranded generic so I don't have as much bloatware/fast updates.
Since I do not wish to brick the device again and go through this again and so I am looking for advice to do this in a way that is guaranteed. With flashtool if I flash "C6906 14.2.A.0.290 Generic CA 1276-7484_R2B" would I have any issues at all? Just load up Flashtool - select the ftf and just use the default settings and plug in the Z1 while holding down the volume button.
I used the latest Flashtool v0.9.13, connected to PC, let install windows the drivers, selected the Unbranded Stock ftf, wiped all data, appslog, cache, all the rest unchecked and I performed the flash. All fine and the phone working well. I don't know why you had problems or why you bricked the phone but there is no advice to give you because it's simply. So even if all it's clear no guarantee and it's up to you. I don't think is the FTF faulty.
eclyptos said:
I used the latest Flashtool v0.9.13, connected to PC, let install windows the drivers, selected the Unbranded Stock ftf, wiped all data, appslog, cache, all the rest unchecked and I performed the flash. All fine and the phone working well. I don't know why you had problems or why you bricked the phone but there is no advice to give you because it's simply. So even if all it's clear no guarantee and it's up to you. I don't think is the FTF faulty.
Click to expand...
Click to collapse
This is separate from how I bricked it (using custom rom), I did this previously with a older version and just not on .290 and I am wondering if there is any issues (IMEI etc) doing it .290 to .290, thats all. I just don't want to make a mistake.
magwart said:
This is separate from how I bricked it (using custom rom), I did this previously with a older version and just not on .290 and I am wondering if there is any issues (IMEI etc) doing it .290 to .290, thats all. I just don't want to make a mistake.
Click to expand...
Click to collapse
Ok, so you bricked the phone with custon rom, now I understand. In this case there is no any issues flashing .290 unbranded on .290 branded. IMEI is lost only when jumping .257 and downgrade directly to .534. It's more "safe" flash .290 on .290. Go flash now.
eclyptos said:
Ok, so you bricked the phone with custon rom, now I understand. In this case there is no any issues flashing .290 unbranded on .290 branded. IMEI is lost only when jumping .257 and downgrade directly to .534. It's more "safe" flash .290 on .290. Go flash now.
Click to expand...
Click to collapse
Thanks. I don't suppose there is any working root for 4.3 yet, is there for the C9606?
Edit: Successfully flashed. Thanks again.
magwart said:
Thanks. I don't suppose there is any working root for 4.3 yet, is there for the C9606?
Click to expand...
Click to collapse
No direct root, like Vroot or 360, for .290 at the moment, just a method to get full root for Locked Bootladers. To do that you have to downgrade, root, install recovery then update to .290 again, a bit longer to get root on your phone, sure this method working for C6902/3 but should work for C6906 too, just check.
Would I be able to go from 290 branded to the new 136 intended without issue? I already bricked one device trying to root and I'm just trying to make sure lol
akusokuzan said:
Would I be able to go from 290 branded to the new 136 intended without issue? I already bricked one device trying to root and I'm just trying to make sure lol
Click to expand...
Click to collapse
Probably because when you bricked your phone was the time when some issues was not discovered yet in do that, and this confirm the fact on the thread now is wrote "How not brick your phone" . BTW, the risk to brick the phone is in downgrading so if you want just to upgrade without Root this way should be more "safe" and you will be able to do it without any issue.
eclyptos said:
Probably because when you bricked your phone was the time when some issues was not discovered yet in do that, and this confirm the fact on the thread now is wrote "How not brick your phone" . BTW, the risk to brick the phone is in downgrading so if you want just to upgrade without Root this way should be more "safe" and you will be able to do it without any issue.
Click to expand...
Click to collapse
Lol yeah, when I was trying to update with root, it didn't go so hot. That thread wasn't stickied until after the debacle. Sounds good though, thanks!
Hi guys this is my first post here so be gentle! I'm trying to get cyanogen mod on my Z1.
I have followed the guides on this forum, my appreciation to all involved here great job!
I downgraded to 4.2.2 from 4.3. I then rooted my the phone. I then unlocked the bootloader.
All went ok. I then downloaded C6903_14.2.A.0.290_1276-0875_Generic UK.ftf and flashed it. The phone then wouldn't turn back on.
So I downloaded C6903 14.1.G.1.534 EE UK 1276-2219_R9A (I'm on EE) and flashed that and I got the phone working again.
I then flashed DoomKernal to get CWM. DoomKernal went fine.
Somewhere along the line I think I got confused and thought DoomKernal would give me CWM and I flashed C6903_14.2.A.0.290_1276-0875_Generic UK.ftf again to upgrade back to 4.3.
Same problem...Phone wouldn't turn on so I repeated the EE branded 4.2.2 flash.
Now DoomKernal seems to be taken off. So my questions are as followed:
Do i need DoomKernal to get CWM?
Do i need to be on 4.4 before I install Cyanogen mod or can I do it straight from 4.2.2 with DoomKernal?
If I'm being a total noob I apologize!
Thanks.
Wizber said:
Hi guys this is my first post here so be gentle! I'm trying to get cyanogen mod on my Z1.
I have followed the guides on this forum, my appreciation to all involved here great job!
I downgraded to 4.2.2 from 4.3. I then rooted my the phone. I then unlocked the bootloader.
All went ok. I then downloaded C6903_14.2.A.0.290_1276-0875_Generic UK.ftf and flashed it. The phone then wouldn't turn back on.
So I downloaded C6903 14.1.G.1.534 EE UK 1276-2219_R9A (I'm on EE) and flashed that and I got the phone working again.
I then flashed DoomKernal to get CWM. DoomKernal went fine.
Somewhere along the line I think I got confused and thought DoomKernal would give me CWM and I flashed C6903_14.2.A.0.290_1276-0875_Generic UK.ftf again to upgrade back to 4.3.
Same problem...Phone wouldn't turn on so I repeated the EE branded 4.2.2 flash.
Now DoomKernal seems to be taken off. So my questions are as followed:
Do i need DoomKernal to get CWM?
Do i need to be on 4.4 before I install Cyanogen mod or can I do it straight from 4.2.2 with DoomKernal?
If I'm being a total noob I apologize!
Thanks.
Click to expand...
Click to collapse
Accidently gave you a thank lol
I actually don't know about branded phone, but I can tell you that your step has gone wrong. You will always lose root
if you flash a sock ftf file.
So you are saying you unlocked bootloader on the 534 rom? Your camera is probably dead now, check it if you can boot.
Unlocking bootloader before getting on 4.3 or 4.4 will result in disabling the camera. You did it now anyway, I can't help you. Maybe flash 4.4 now and see if your camera works again.
Flashing cyanogen is not about root but unlock bootloader, people would recommend you to root first becoz you will be able to do TA back up with root
(TA backup is a way to backup drm key, so you can restore it in the future and restore locked bootloader exclusive feature like X reality and better quality camera. Seems you don't know what I'm talking about and already unlocked the bootloader before you even ever heard about TA. Sorry can't help you to save this part, you may continue anyway)
So on 4.4, you may have to unlock the bootloader again since the bootloader itself maybe relocked itself when you flash a sock ftf file. ( doesn't mean you restored DRM key is back)
So maybe unlock it again and start to flash cm.
Personally I wouldnt recommend a newbie in Android to unlock bl so fast since it's too easy to mess up serious things up and it's not so easy for turning back. Well you started messing them up anyway, continue then
Thanks for the reply.
I did do a TA back up before I unlocked the bootloader....If i restore from this will it get the camera working?
I have tried to flash Cyanogen mod but it fails error 7. It thinks my Z1 is a Togari (Z ultra) which it isnt cant find anything on this!
Ok so, i'll try and get on 4.4...
I have a UK Z1 C6903.
Can I flash to C6903 14.3.A.0.681 Global 1277-2880_R5C (this is 4.4 right?)
OR does it have to be a UK one I cant seem to find a uk 4.4?
So after a bit of stress and the phone getting stuck in bootloop I have installed 4.4.2 using .681 commercial.
I hope it will be smooth sailing now to install cyanogen mod
Oh and the camera works again!
Wizber said:
Thanks for the reply.
I did do a TA back up before I unlocked the bootloader....If i restore from this will it get the camera working?
I have tried to flash Cyanogen mod but it fails error 7. It thinks my Z1 is a Togari (Z ultra) which it isnt cant find anything on this!
Ok so, i'll try and get on 4.4...
I have a UK Z1 C6903.
Can I flash to C6903 14.3.A.0.681 Global 1277-2880_R5C (this is 4.4 right?)
OR does it have to be a UK one I cant seem to find a uk 4.4?
Click to expand...
Click to collapse
happy to hear that u actually did TA backup
any 4.4 should be fine
after that install doomlord advanced stock kernel v2 i think
Hello, I have upgraded to 5.0.2. via OTA a few days ago. My phone was RetEU .23, and the update notification that 5.0.2. became so annoying, so I decided to give it a shot. Lollipop is a disappointment for me, battery drain issues, lagging all over the menus, slow dialer, the phone was running better with KK installed, so I want to return back to 4.4.4.
Unfortunately there is no clear opinion whether this could be done, some say that when you have 5.0.2. bootloader installed with the OTA, you cannot go back, others say that it is no problem to do so. Really confusing.
Anyone tried to go back to 4.4.4. after getting the OTA? Could you please share how did you do so? Unlocking the bootloader and flashing one of the 4.4.4 stock ROMs from the General Section?
dub_1 said:
Hello, I have upgraded to 5.0.2. via OTA a few days ago. My phone was RetEU .23, and the update notification that 5.0.2. became so annoying, so I decided to give it a shot. Lollipop is a disappointment for me, battery drain issues, lagging all over the menus, slow dialer, the phone was running better with KK installed, so I want to return back to 4.4.4.
Unfortunately there is no clear opinion whether this could be done, some say that when you have 5.0.2. bootloader installed with the OTA, you cannot go back, others say that it is no problem to do so. Really confusing.
Anyone tried to go back to 4.4.4. after getting the OTA? Could you please share how did you do so? Unlocking the bootloader and flashing one of the 4.4.4 stock ROMs from the General Section?
Click to expand...
Click to collapse
Hello,
i actually switched from 5.0.2 back to KK 4.4.4 from Pizza_dox
when your bootloader is unlocked and you have TWRP installed
follow these instructions
1, go do a factory reset
2, go to advanced wipe and select :dalvik cache/system/data/internal storage/cache
when you did that there is no system on your phone so when you restart you will be going into an endless bootloop.
3, go press install and select the Microkat.zip file from Pizza_Dox
when that is done you have agian kitkat on your device
i think there some other methods but this is how i did it succesfully.
Also dont forget to make a backup because you will lose everything.
Gerriitw said:
Hello,
i actually switched from 5.0.2 back to KK 4.4.4 from Pizza_dox
when your bootloader is unlocked and you have TWRP installed
follow these instructions
1, go do a factory reset
2, go to advanced wipe and select :dalvik cache/system/data/internal storage/cache
when you did that there is no system on your phone so when you restart you will be going into an endless bootloop.
3, go press install and select the Microkat.zip file from Pizza_Dox
when that is done you have agian kitkat on your device
i think there some other methods but this is how i did it succesfully.
Also dont forget to make a backup because you will lose everything.
Click to expand...
Click to collapse
Thanks for your comment. I actually plan to go back to the stock 4.4.4. I have a basic idea of bootloader and things but not deep into this and have never done it before. From what I have read , I will have to:
1. First I need to unlock the bootloader, as per the instructions in the Moto website.
2. Then I will need to do a factory reset. (settings-secuirity-factory reset or some other way of doing this?)
3. Download 4.4.4 firmware + script.
4. Start up with Power+VolDown buttons and have bootloader menu on screen
5. Run the downloaded script from its .bat file.
6. Wait for some time for the flashing to end, then have stock 4.4.4
Please correct me if something is wrong or missed.
dub_1 said:
Thanks for your comment. I actually plan to go back to the stock 4.4.4. I have a basic idea of bootloader and things but not deep into this and have never done it before. From what I have read , I will have to:
1. First I need to unlock the bootloader, as per the instructions in the Moto website.
2. Then I will need to do a factory reset. (settings-secuirity-factory reset or some other way of doing this?)
3. Download 4.4.4 firmware + script.
4. Start up with Power+VolDown buttons and have bootloader menu on screen
5. Run the downloaded script from its .bat file.
6. Wait for some time for the flashing to end, then have stock 4.4.4
Please correct me if something is wrong or missed.
Click to expand...
Click to collapse
What i did...
Download the correct kk stock rom
Setup my drivers and mfastboot correctly (simple fast boot works too)
Unlocked bootloader. (Voids warranty coz gives bootloader status 3)
Reboot in bootloader now...
Flash all files of kitkat except gpt.bin and motoboot.bin (they never flash for me lol )
Flash all other files (i typed filenames manually)
Fastboot reboot
Ps - no matter what i do..i have not been able to lock my bootloader once i downgraded from 5.0.2 to 4.4.4
Locking bootloader works well on 5.0.2
doctor_droid said:
What i did...
Download the correct kk stock rom
Setup my drivers and mfastboot correctly (simple fast boot works too)
Unlocked bootloader. (Voids warranty coz gives bootloader status 3)
Reboot in bootloader now...
Flash all files of kitkat except gpt.bin and motoboot.bin (they never flash for me lol )
Flash all other files (i typed filenames manually)
Fastboot reboot
Ps - no matter what i do..i have not been able to lock my bootloader once i downgraded from 5.0.2 to 4.4.4
Locking bootloader works well on 5.0.2
Click to expand...
Click to collapse
well guess im gonna try - but no need to do, as makes no difference except to downgrading.... So best off unlocked
simply use the 4.4.4 link in my signature and pick firmware 2 or B called DSDSALL to go back to 4.4.4 .23 ret(xx)
So, it has been confirmed by several forums that when you have officially received the 5.0.2 OTA download update, you cannot go back to KK.
It has something to do with the new L bootloader. I guess that there is no way of doing this, up to now at least. Don't know if someone has tried and succeeded.
When you have flashed the 5.0.2. OTA however, you can have KK installed back, as most of the users on xda.
dub_1 said:
So, it has been confirmed by several forums that when you have officially received the 5.0.2 OTA download update, you cannot go back to KK. FALSE
It has something to do with the new L bootloader. I guess that there is no way of doing this, up to now at least. Don't know if someone has tried and succeeded. FALSE
When you have flashed the 5.0.2. OTA however, you can have KK installed back, as most of the users on xda.
Click to expand...
Click to collapse
YES you can install kitkat see my signature you NEED a unlocked boot loader
I have been up / down and sideways with ALL 4 versions ( 3 kitkat 1 Lollipop) of XT1068 firmware 50+ installs , a few soft bricks - also installed a few custom roms - gone back to lollipop and kitkat from these too.
see my signature for 4.4.4 and 5.0.2 firmware xt1068
reefuge said:
YES you can install kitkat see my signature you NEED a unlocked boot loader
I have been up / down and sideways with ALL 4 versions ( 3 kitkat 1 Lollipop) of XT1068 firmware 50+ installs , a few soft bricks - also installed a few custom roms - gone back to lollipop and kitkat from these too.
see my signature for 4.4.4 and 5.0.2 firmware xt1068
Click to expand...
Click to collapse
Cheers mate. Already installed stock 4.4.4.
Does it make sense to relock the bootloader?
dub_1 said:
Cheers mate. Already installed stock 4.4.4.
Does it make sense to relock the bootloader?
Click to expand...
Click to collapse
no absolutely not....... boot logo warning still comes up ...warranty still void and strangely if been to 5.0.2 and back to 4.4.4 it wont relock
but you can relock if on 5.0.2
Successful downgrade from 5.0.2 to 4.4.4
Dear All,
Pls help me in downgrading from 5.0.2 to 4.4.4 on my XT1068 Dual Sim Indian Version.
I need to know whether we can return to 4.4.4 without unlocking bootloader and is rooting needed.
Pls let me know your experience in a noob friendly way.
TIA... :angel:
dub_1 said:
Cheers mate. Already installed stock 4.4.4.
Does it make sense to relock the bootloader?
Click to expand...
Click to collapse
What exactly did you do? His signature is gone...
Hey, so my phone was on a custom ROM for some time now and I just recently went back to stock by flashing an .ftf file with FlashTool.
Since I wanted to go very sure that I take the right file to flash, I chose one with the firmware version 12.1.A.0.266 because I didn't find a newer one, I trusted, thinking I could update it to 12.1.A.1.207 via Update Center then. The flashing process went flawless but the thing is that I couldn't update my phone.
I go into the Update Center, click on download (it's the newest 12.1.A.1.207 firmware) and afterwards on install. The phone shuts down and for 4 or 5 seconds the screen shows the normal animation it always shows, when updating firmware.
After these 4 or 5 seconds it reboots normally and I get the alert that installation is not possible. I tried it a hundred times via PC Companion as well but it always says that I have modified software and it can't be updated.
I also reset my phone thinking this could solve the issue but it didn't and now I don't know what to do. I don't really want to flash an .ftf file again because I'm always a bit anxious when flashing something.
If you have an idea on how to solve my problem I'd be very thankful
Anyone?
Schokonuss said:
Anyone?
Click to expand...
Click to collapse
If you unlocked bootloader you cant update, maybe even if you dont unlock it there can be problems
Just flash ftf of version you want i reccomend you .205
On 207 i have sim reading problems
Spasik said:
If you unlocked bootloader you cant update, maybe even if you dont unlock it there can be problems
Just flash ftf of version you want i reccomend you .205
On 207 i have sim reading problems
Click to expand...
Click to collapse
Oh thank you!
I didn't even know, that updating with an unlocked bootloader is not possible. Thanks for your recommendation as well