Hi
After using CM9 for some time, I decided to upgrade to the new stable release. I am not sure what happened, but the flash was unsuccessful. Using ODIN I restored my phone back to stock.
When I try to install CM9 I now end up in a recovery loop, where the phone will only boot into recovery.
What am I doing wrong? How can I fix this?
Many thanks
Harry
morseharry said:
When I try to install CM9 I now end up in a recovery loop, where the phone will only boot into recovery.
Click to expand...
Click to collapse
Do you install cm9 through cwm recovery?
Freddie_X said:
Do you install cm9 through cwm recovery?
Click to expand...
Click to collapse
Yes I did, using the CWM that comes with the speedmod kernel. The CWM that the phone boots to after this, however, is an updated one, I assume the one that comes with CM9. From here I have tried reflashing CM9 but still have the recovery bootloop
Harry
Hey
Is your phone rooted??
and try flashing the rom twice..
Hi
It has Cwm but I didn't root before flashing. Thought it didn't make a difference?
I have tried flashing twice, still has me booting into recovery
Harry
morseharry said:
Hi
It has Cwm but I didn't root before flashing. Thought it didn't make a difference?
I have tried flashing twice, still has me booting into recovery
Harry
Click to expand...
Click to collapse
For installing CM9 your phones needs to be on 2.3.6 and rooted...click here for my guide...
After I follow your guide will I have cwm and do i then just flash as usual?
Harry
Yup..
After rooting 2.3.6 you can follow the regular steps for CM9...
Sent from my GT-I9000
tchindalia said:
Yup..
After rooting 2.3.6 you can follow the regular steps for CM9...
Sent from my GT-I9000
Click to expand...
Click to collapse
Ok I have upgraded, then when I try to flash CM9 it starts the process then quickly enters a bootloop where I get to the cyanogenmod kernel screen. I know I need to flash twice but I cannot see how to do so?
Thanks
Harry
Hey
Remove the battery...put it back after atleast 10 sec..then boot into recovery using 3 Button Combo...then flash the rom again...
This time it'll take a few min..then it'll re-boot itself..
Enjoy..
Got it all working perfectly now, thank you so much
Hello there, having trouble flashing roms with trwp 2.3.4 getting error 7.
So I was wondering how do I get into the bootloader or ADB mode when I only have access to twrp?
Want to flash Clockworkmod or a newer version of trwp but can't .
Very frustrating, any help would be greatly appreciated.
Pantherx12 said:
Hello there, having trouble flashing roms with trwp 2.3.4 getting error 7.
So I was wondering how do I get into the bootloader or ADB mode when I only have access to twrp?
Want to flash Clockworkmod or a newer version of trwp but can't .
Very frustrating, any help would be greatly appreciated.
Click to expand...
Click to collapse
Which kernel are you on ?
Just flash a stock cm10.1 kernel & reboot to recovery. Then flash whatever you want.
Pantherx12 said:
Hello there, having trouble flashing roms with trwp 2.3.4 getting error 7.
So I was wondering how do I get into the bootloader or ADB mode when I only have access to twrp?
Want to flash Clockworkmod or a newer version of trwp but can't .
Very frustrating, any help would be greatly appreciated.
Click to expand...
Click to collapse
The note is unique as this is all built into the kernel... So flash a new kernel you get a recovery with it... Don't push anything with Adb...if you must use PC Odin
Sent from my Samsung Galaxy SV using Tapatalk 3
warfareonly said:
Which kernel are you on ?
Just flash a stock cm10.1 kernel & reboot to recovery. Then flash whatever you want.
Click to expand...
Click to collapse
asf58967 said:
The note is unique as this is all built into the kernel... So flash a new kernel you get a recovery with it... Don't push anything with Adb...if you must use PC Odin
Sent from my Samsung Galaxy SV using Tapatalk 3
Click to expand...
Click to collapse
Think I'm on hydracore at the moment, that's what I tried over odin anyway.
Thing is I'm getting efs mount errors when I try and flash my previous rom (alliance v3)
Thanks though, i'll try flashing some different kernel.
Wooo, seems flashing hydracore from odin failed, manually flashing hydracore worked a charm on CWM 6 now and just flashed without any errors.
Thank you very much chaps!
(Although Rom won't boot, is there any additional steps to flashing roms with the note, don't have to do any boot.img stuff right?
Pantherx12 said:
Think I'm on hydracore at the moment, that's what I tried over odin anyway.
Thing is I'm getting efs mount errors when I try and flash my previous rom (alliance v3)
Thanks though, i'll try flashing some different kernel.
Wooo, seems flashing hydracore from odin failed, manually flashing hydracore worked a charm on CWM 6 now and just flashed without any errors.
Thank you very much chaps!
(Although Rom won't boot, is there any additional steps to flashing roms with the note, don't have to do any boot.img stuff right?
Click to expand...
Click to collapse
Did you wipe ? Make sure you're on safe kernel.
I had the same !
When you want to flash sth, just uncheck that two thing above "slide to flash"
Hi,
my phone is currently stuck in logo and i can enter download mode only. running 4.1 jb. tried searching and all the solution given was to flash using stock fw via odin. problem is i got my 4.1.2 thru kies(i9070dxamd1 globe philippines) i tried sammobile but only 1 carrier is provided. anyone got i9070dxamd1 globe philippines there? or any link where i could download it?
thanks =)
tsikoske said:
Hi,
my phone is currently stuck in logo and i can enter download mode only. running 4.1 jb. tried searching and all the solution given was to flash using stock fw via odin. problem is i got my 4.1.2 thru kies(i9070dxamd1 globe philippines) i tried sammobile but only 1 carrier is provided. anyone got i9070dxamd1 globe philippines there? or any link where i could download it?
thanks =)
Click to expand...
Click to collapse
I think that you can flash that Globe version too (just pay attention is it P or not (firmware and your phone), it is just difference in bloatware from that provider.
Try looking on samsung-updates.com too.
shut_down said:
I think that you can flash that Globe version too (just pay attention is it P or not (firmware and your phone), it is just difference in bloatware from that provider.
Try looking on samsung-updates.com too.
Click to expand...
Click to collapse
its i9070 only. i found some fw in officialrom.com i think and it has same build version from live.samsung-updates.com.
the problem with my phone is that i was running twrp and a custom rom tried installing carbon over it. it was a success but then i dont like much the carbon custom rom so i tried to reflash it thru recovery. boot to recovery using quickboot(phone got a busted volume keys) i found out that twrp was replace with cwm so i wipe data/cache/factory and flash it with cocore+twrp then reboot system and it got stock in boot logo. but i can go to download mode volume down+home+power. only problem is volume up isnt working lol. so i order volume keys waiting for it to arrive so that i could install it and try to fix my phone. i still dont know yet if i could go to recovery mode.
thanks =)
tsikoske said:
its i9070 only. i found some fw in officialrom.com i think and it has same build version from live.samsung-updates.com.
the problem with my phone is that i was running twrp and a custom rom tried installing carbon over it. it was a success but then i dont like much the carbon custom rom so i tried to reflash it thru recovery. boot to recovery using quickboot(phone got a busted volume keys) i found out that twrp was replace with cwm so i wipe data/cache/factory and flash it with cocore+twrp then reboot system and it got stock in boot logo. but i can go to download mode volume down+home+power. only problem is volume up isnt working lol. so i order volume keys waiting for it to arrive so that i could install it and try to fix my phone. i still dont know yet if i could go to recovery mode.
thanks =)
Click to expand...
Click to collapse
You should do reboot recovery option in TWRP. But still you can't go back from CM10.2 and CM11 to stock without repartitioning /preload partition. You will get bootloop too... You must flash stock firmware or use this: http://forum.xda-developers.com/showthread.php?t=2612540
shut_down said:
You should do reboot recovery option in TWRP. But still you can't go back from CM10.2 and CM11 to stock without repartitioning /preload partition. You will get bootloop too... You must flash stock firmware or use this: http://forum.xda-developers.com/showthread.php?t=2612540
Click to expand...
Click to collapse
i wasnt planning on going to stock. i was trying to install pure vanilla over carbon
tsikoske said:
i wasnt planning on going to stock. i was trying to install pure vanilla over carbon
Click to expand...
Click to collapse
You was not planning, but you must repartition that preload partition. With that script or with flashing stock firmware.
P.S. If you mean ROM Pure Vanilla - it is based on stock ROM. It is themed stock ROM.
shut_down said:
You was not planning, but you must repartition that preload partition. With that script or with flashing stock firmware.
P.S. If you mean ROM Pure Vanilla - it is based on stock ROM. It is themed stock ROM.
Click to expand...
Click to collapse
oh ok. sorry my phone is fine now btw. flash with odin =)
Hello, i recently tried to flash the C-Rom on my gt n7000, but i keep getting the tmp/sideload/package.zip (status 7) error, now my phone is stuck in bootloop. i read that i need to flash a stock rom but my charging port has been damaged as such i cant connect the phone to my computer to use Odin. Is there a stock rom that can be flashed through recovery?
annie22 said:
Hello, i recently tried to flash the C-Rom on my gt n7000, but i keep getting the tmp/sideload/package.zip (status 7) error, now my phone is stuck in bootloop. i read that i need to flash a stock rom but my charging port has been damaged as such i cant connect the phone to my computer to use Odin. Is there a stock rom that can be flashed through recovery?
Click to expand...
Click to collapse
You came so far, its to late to turn back...
If only you had read the instructions...
Then you would know...
That you need a more recent version of your recovery...
Which is part of a kernel...
So flash raw kernel...
And then flash C-Rom...
annie22 said:
Hello, i recently tried to flash the C-Rom on my gt n7000, but i keep getting the tmp/sideload/package.zip (status 7) error, now my phone is stuck in bootloop. i read that i need to flash a stock rom but my charging port has been damaged as such i cant connect the phone to my computer to use Odin. Is there a stock rom that can be flashed through recovery?
Click to expand...
Click to collapse
To Flash ANY/ALL KK Based Roms (4.4+) you need base recovery 0f 6.0.4.4+. Can you still reboot to recovery? What rom vers are you previously on? Rooted? What recovery? If your charging port has been damaged, how are you gonna charge your phone? Get it repaired ASAP before doing anything else. Loss of battery during Rom flashing can make your phone a nice desk decoration.
Jackwu696 said:
To Flash ANY/ALL KK Based Roms (4.4+) you need base recovery 0f 6.0.4.4+. Can you still reboot to recovery? What rom vers are you previously on? Rooted? What recovery? If your charging port has been damaged, how are you gonna charge your phone? Get it repaired ASAP before doing anything else. Loss of battery during Rom flashing can make your phone a nice desk decoration.
Click to expand...
Click to collapse
Yes i can boot to recovery, thats all my phone does is load with the Samsung boot logo then the recovery screen. Im on the offical samsung stock rom. Yes its rooted.CWM, I use a universal battery charger, the battery was full before i tried flasing the C-Rom.
annie22 said:
Yes i can boot to recovery, thats all my phone does is load with the Samsung boot logo then the recovery screen. Im on the offical samsung stock rom. Yes its rooted.CWM, I use a universal battery charger, the battery was full before i tried flasing the C-Rom.
Click to expand...
Click to collapse
Do you still remember your Stock Rom's Build number? If yes, then you can try downloading philz safe kernel with recovery that is compatible with your build number, flash it in cwm recovery, then reboot to RECOVERY, from there do a factory reset wipe, all formats (system, data, cache, preload) wipe dalvik cache (If you don't understand any of the terms I mentioned above, please go to philz page and read) and Flash a TW BASED custom rom first (you can find and download any rom as long as it's TW based). See if that boots.
Ultimately you WILL need that charging/USB Port fixed so please make that a TOP Priority
Azeazezar said:
You came so far, its to late to turn back...
If only you had read the instructions...
Then you would know...
That you need a more recent version of your recovery...
Which is part of a kernel...
So flash raw kernel...
And then flash C-Rom...
Click to expand...
Click to collapse
I read the entire C-ROM tutorial, before doing anything.
Jackwu696 said:
Do you still remember your Stock Rom's Build number? If yes, then you can try downloading philz safe kernel with recovery that is compatible with your build number, flash it in cwm recovery, then reboot to RECOVERY, from there do a factory reset wipe, all formats (system, data, cache, preload) wipe dalvik cache (If you don't understand any of the terms I mentioned above, please go to philz page and read) and Flash a TW BASED custom rom first (you can find and download any rom as long as it's TW based). See if that boots.
Ultimately you WILL need that charging/USB Port fixed so please make that a TOP Priority
Click to expand...
Click to collapse
No i dont remember it...
annie22 said:
No i dont remember it...
Click to expand...
Click to collapse
Then I suggest you fix that port so you can use odin, otherwise follow @Azeazezar advice
annie22 said:
I read the entire C-ROM tutorial, before doing anything.
Click to expand...
Click to collapse
Follow these instructions.
Azeazezar said:
Follow these instructions.
Click to expand...
Click to collapse
Ohh, , okay will do.
@annie22 you could also download any JB kernel (if you were on JB) of philz and flash it in recovery, reboot recovery, then flash Raw kernel r4 or r5 and reboot recovery and from there flash C-Rom or any other KK rom. You can use any philz kernel irrespective of the build number as long as you are using it only to flash another kernel and then rom of your choice. Make sure to download the .zip version of the philz kernel and put that and raw kernel and rom on external sd card. Keep back up of these kernels and roms on pc as well so that you can connect memory card to pc and transfer those files back to card, as it so happened that i while doing full wipe on philz kernel it also wiped my external card.
treacherous_hawk said:
@annie22 you could also download any JB kernel (if you were on JB) of philz and flash it in recovery, reboot recovery, then flash Raw kernel r4 or r5 and reboot recovery and from there flash C-Rom or any other KK rom. You can use any philz kernel irrespective of the build number as long as you are using it only to flash another kernel and then rom of your choice. Make sure to download the .zip version of the philz kernel and put that and raw kernel and rom on external sd card. Keep back up of these kernels and roms on pc as well so that you can connect memory card to pc and transfer those files back to card, as it so happened that i while doing full wipe on philz kernel it also wiped my external card.
Click to expand...
Click to collapse
Hi, thanks. Excuse my slowness but Umm could you direct me to the link please, I've been searching and feel I'm going around in circles, I see the thread for philz but no download link..
annie22 said:
Hi, thanks. Excuse my slowness but Umm could you direct me to the link please, I've been searching and feel I'm going around in circles, I see the thread for philz but no download link..
Click to expand...
Click to collapse
You should be able to flash raw kernel from just about any custom recovery. Just skip philz
Azeazezar said:
You should be able to flash raw kernel from just about any custom recovery. Just skip philz
Click to expand...
Click to collapse
Problem is, both r4 n r5 download links are dead... do u know any mirror? I'd like to keep a copy of r5 too just in case I need TWRP.
Sent from my GT-N7000 using XDA Free mobile app
Jackwu696 said:
Problem is, both r4 n r5 download links are dead... do u know any mirror? I'd like to keep a copy of r5 too just in case I need TWRP.
Sent from my GT-N7000 using XDA Free mobile app
Click to expand...
Click to collapse
The links work fine here.
If you have trouble I could send you a copy.
Azeazezar said:
The links work fine here.
If you have trouble I could send you a copy.
Click to expand...
Click to collapse
Yes I'd really like that mate. Gonna DL it 1st thing tomorrow. Just the raw5 will do. Thanks again for your trouble
Sent from my GT-N7000 using XDA Free mobile app
annie22 said:
Hi, thanks. Excuse my slowness but Umm could you direct me to the link please, I've been searching and feel I'm going around in circles, I see the thread for philz but no download link..
Click to expand...
Click to collapse
Can't search, Can't help.
annie22 said:
Hi, thanks. Excuse my slowness but Umm could you direct me to the link please, I've been searching and feel I'm going around in circles, I see the thread for philz but no download link..
Click to expand...
Click to collapse
if you r on cwm based or any custom recovery
goto android development page download forest cm11 kernel and flash it have latest philz recovery
if you are on stock
then
got original android development page >philz*******>download odin flashable md5> flash>install forestcm11 kernel> install c rom or any other
i dont know why u people search for single when you have an alternate
thanks to @forest1971
Flash success!!!! Bricked no more.
Just wanted to say thank you to everyone for all the advice, I was finally able to flash the philz jb kernel and then install the latest version, then iinstall C rom. YAAAAAY!!!!!! Phone is now fully functional
annie22 said:
Just wanted to say thank you to everyone for all the advice, I was finally able to flash the philz jb kernel and then install the latest version, then iinstall C rom. YAAAAAY!!!!!! Phone is now fully functional
Click to expand...
Click to collapse
Glad to hear that, Remember to change your thread by adding [SOLVED] to let others know and also as reference to others facing the same problem.
---------- Post added at 07:14 AM ---------- Previous post was at 07:14 AM ----------
annie22 said:
Just wanted to say thank you to everyone for all the advice, I was finally able to flash the philz jb kernel and then install the latest version, then iinstall C rom. YAAAAAY!!!!!! Phone is now fully functional
Click to expand...
Click to collapse
Glad to hear that, Remember to change your thread title by adding [SOLVED] to let others know and also as reference to others facing the same problem.
So I upgraded my firmware to TMO 5.1.1 then tried to use CF-Auto Root and now I'm stuck in a boot loop. Is there a stock TMO 5.1.1 that I'm able to flash through Odin??
Sbnmatthew said:
So I upgraded my firmware to TMO 5.1.1 then tried to use CF-Auto Root and now I'm stuck in a boot loop. Is there a stock TMO 5.1.1 that I'm able to flash through Odin??
Click to expand...
Click to collapse
Flash TWRP with Odin
Reboot in recovery mode
Flash freeza beastmode kernel :good:
So I'm really screwing up. Before I did what you said, I tried to install another rom. In Doing so I wiped all data, system too. So the beast mode kernel was installed but now theres no os. Any suggestions?
EDIT: So I installed the Rapture rom and it looks like I'm good to go right now! Thanx
Sbnmatthew said:
So I'm really screwing up. Before I did what you said, I tried to install another rom. In Doing so I wiped all data, system too. So the beast mode kernel was installed but now theres no os. Any suggestions?
EDIT: So I installed the Rapture rom and it looks like I'm good to go right now! Thanx
Click to expand...
Click to collapse
Never forget read before flashing a rom if is the first time than you do this
You don't need wipe system if you want keep the rom
But I'm glad to hear that your phone works again thanks to xda and all developers :highfive: