Any preferences
Sent from my 831C using xda app-developers app
Run ART in dev options. It should help with app performance and battery life. But read the following thread: http://forum.xda-developers.com/goo...dicated-runtime-thread-art-vs-dalvik-t2516646
ART all day personally. Living in the future
~m8whl modded stock
2.265 Max ¦ 300 Min
ondemand
row
Mass do you notice better battery life on ART.
One method1911
I gotta stick with dalvik to use Xposed.
Captain_Throwback said:
I gotta stick with dalvik to use Xposed.
Click to expand...
Click to collapse
Ditto
Sent from my 831C using Tapatalk
METHOD1911 said:
Mass do you notice better battery life on ART.
One method1911
Click to expand...
Click to collapse
Difficult to tell if it's just placebo or not, as I have to done an extensive test between the two, but Yea.... Minute, but definitely seems to be a little bit better. Just long as you don't wipe cache/dalvik lol. That takes forever and is a battery drainer for sure doing all the compiling of apps again ahead of time.
~m8whl modded stock
2.265 Max ¦ 300 Min
ondemand
row
Changing to ART in ViperRom made it so i can no longer boot the phone. Can I fix this without doing a full wipe and Rom reflash?
Sent from my HTCONE using XDA Premium 4 mobile app
fifedogg said:
Changing to ART in ViperRom made it so i can no longer boot the phone. Can I fix this without doing a full wipe and Rom reflash?
Sent from my HTCONE using XDA Premium 4 mobile app
Click to expand...
Click to collapse
You can't use ART on a ROM that has been deodexed. Boot into recovery, adb pull /system/build.prop and change the line persist.sys.dalvik.vm.lib=libart.so back to persist.sys.dalvik.vm.lib=libdvm.so.
Adb push build.prop /system, adb shell chmod 644 /system/build.prop, then reboot. Hopefully that'll get you booting again.
If that doesn't work, you'll have to reflash the ROM.
Tried the odex from device script, and everything odexed except system/app and priv+app.... Working on figuring out how to have my cake and eat it too! Haha
~m8whl modded stock
2.265 Max ¦ 300 Min
ondemand
row
MassStash said:
Tried the odex from device script, and everything odexed except system/app and priv+app.... Working on figuring out how to have my cake and eat it too! Haha
~m8whl modded stock
2.265 Max ¦ 300 Min
ondemand
row
Click to expand...
Click to collapse
Using that script won't make the ROM ART-compatible.
Captain_Throwback said:
Using that script won't make the ROM ART-compatible.
Click to expand...
Click to collapse
Oh Yea? Bummer... Only way is to full odex on pc by adb pulling it all? Or just no possibility?
~m8whl modded stock
2.265 Max ¦ 300 Min
ondemand
row
MassStash said:
Oh Yea? Bummer... Only way is to full odex on pc by adb pulling it all? Or just no possibility?
~m8whl modded stock
2.265 Max ¦ 300 Min
ondemand
row
Click to expand...
Click to collapse
They would have to be recompiled. I don't believe the tools we have currently will create ART-compatible odex files.
Captain_Throwback said:
They would have to be recompiled. I don't believe the tools we have currently will create ART-compatible odex files.
Click to expand...
Click to collapse
Ahhhhh, interesting....
~m8whl modded stock
2.265 Max ¦ 300 Min
ondemand
row
I'm s-off on stock rooted. ART works, and so does Xposed. Running the pre alpha of Sense 6 Toolbox and I have 95% of the mods I want without flashing a ROM or breaking ART. [emoji106]
Edit: I'm not so sure ART stuck. LOL
Sent from my 831C using Tapatalk
tbonanno231 said:
I'm s-off on stock rooted. ART works, and so does Xposed. Running the pre alpha of Sense 6 Toolbox and I have 95% of the mods I want without flashing a ROM or breaking ART. [emoji106]
Edit: I'm not so sure ART stuck. LOL
Sent from my 831C using Tapatalk
Click to expand...
Click to collapse
Lol was about to say, "uhhhhhhh pretty sure you're not" haha. Xposed automatically switches you back to dalvik if you have xposed framework installed/setup
~m8whl modded stock
2.265 Max ¦ 300 Min
ondemand
row
For those of you running ART, what are your thoughts so far? I switched over to ART 2 days ago. No huge differences that I can tell. Battery seems to be about the same.
AZBoomer said:
For those of you running ART, what are your thoughts so far? I switched over to ART 2 days ago. No huge differences that I can tell. Battery seems to be about the same.
Click to expand...
Click to collapse
I'm curious as well.
Sent from my 831C using Tapatalk
Art made my M8 slow and glitchy. I switched back and haven't looked back.
Sent from my 831C using Tapatalk
No problems here so far !
Related
Can't figure out with its doing this, ran about 4 different rims, all seaming to have the skipping problem. Other than the skipping, everything is working fine ..?
HELP PLEASEEE.
Sent from my HERO200 using XDA App
alexdemonumber3 said:
Can't figure out with its doing this, ran about 4 different rims, all seaming to have the skipping problem. Other than the skipping, everything is working fine ..?
HELP PLEASEEE.
Sent from my HERO200 using XDA App
Click to expand...
Click to collapse
If you are running an oc kernel try reverting back to an older one .If you are running setcpu or oc widget try raising the minimum freq. til it stops.
FdxRider said:
If you are running an oc kernel try reverting back to an older one .If you are running setcpu or oc widget try raising the minimum freq. til it stops.
Click to expand...
Click to collapse
I tried running cm6.1, cm6.2, aospGBmod.2 and aosp9.9.2, all with the decafuct 691mhz capped kernal. Fail.
So I tried running aosp9.9.2 with the decafuct 768mhz kernal. Works amazingly. Thanks for the help man!
I <3 XDA and all the great folks here :]
Sent from my HERO200 using XDA App
alexdemonumber3 said:
I tried running cm6.1, cm6.2, aospGBmod.2 and aosp9.9.2, all with the decafuct 691mhz capped kernal. Fail.
So I tried running aosp9.9.2 with the decafuct 768mhz kernal. Works amazingly. Thanks for the help man!
I <3 XDA and all the great folks here :]
Sent from my HERO200 using XDA App
Click to expand...
Click to collapse
No prob glad I could point you in the right direction ,which kerenel comes with that rom I'd just like to know.Thanks
FDX
NVM I found out THX
FdxRider said:
If you are running an oc kernel try reverting back to an older one .If you are running setcpu or oc widget try raising the minimum freq. til it stops.
Click to expand...
Click to collapse
FdxRider said:
No prob glad I could point you in the right direction ,which kerenel comes with that rom I'd just like to know.Thanks
FDX
NVM I found out THX
Click to expand...
Click to collapse
Yup, bumping up the min frequency will fix it
About that kernal, I don't know which one is default on aosp froyo 9.9.2 cause I flashed 768mhz decafuct right after I installed the rom :[
Sent from my HERO200 using XDA App
It's ok ,I found out but I appreciate the response back.
alexdemonumber3 said:
About that kernal, I don't know which one is default on aosp froyo 9.9.2 cause I flashed 768mhz decafuct right after I installed the rom :[
Sent from my HERO200 using XDA App
Click to expand...
Click to collapse
Sent From My Pedal-to-the-Metal Hero!
Can you give me info for your full Hero setup(rom, kernal, radio, etc.)? Im not a pro so I wanna see if I can push this sucker faster lol
Sent from my HERO200 using XDA App
alexdemonumber3 said:
Can you give me info for your full Hero setup(rom, kernal, radio, etc.)? Im not a pro so I wanna see if I can push this sucker faster lol
Sent from my HERO200 using XDA App
Click to expand...
Click to collapse
Nfinite's .2 stk rom,Decad3nce's Decafuct #589kernal 691mhz(you can use his 768 kernel) to get it to 768 you have to use his battery tweak,oc widget,or set cpu, latest radio .29 I believe.I strip all sprint bloat out,a2sd is enabled and set to zip-align apps on boot. I think thats it if I come up with more will edit this post.
Huge breakthrough. I'm running cm6.1 right now and using overclock widget and I figured out the fix for this is the cpu frequency update interval setting. If set for a long period of time, it doesn't seen to skip as much!
Sent from my HERO200 using XDA App
alexdemonumber3 said:
Huge breakthrough. I'm running cm6.1 right now and using overclock widget and I figured out the fix for this is the cpu frequency update interval setting. If set for a long period of time, it doesn't seen to skip as much!
Sent from my HERO200 using XDA App
Click to expand...
Click to collapse
Great,glad to hear your Hero is rockin now!
i had this same problem when i switched to CM6.1 BlackMod it was really embarrassing when i had it hooked up to the Speakers at work and it kept skipping and a coworker had to plug up his VZW Droid.
quick fix was changing setCPU to Performance and not onDemand. i see you have your problem fixed just thought this would help anyone in the future.
Android Ver - 2.2.1
Baseband Ver - 2.42.02.10.29
Kernel ver - [email protected] #4
Mod Ver - CyanogenMod-6-05DEC2010-BLACKMOD
I also have Collin_ph_battery_Tweak_v3_rc2 installed
Good one Thanks for jumpin in there with extra info
Going to try this on the D3, its big in the fascinate world. May be worth a dev porting to the D3 specifically. I'm going to take the plunge though since we can do nandbackups.
http://forum.xda-developers.com/showthread.php?t=1236779
From the thread post:
Whats inside:
changed partition mounts--- for less data corruption
patched sqlite's----IMPROVES I/O
honecomb 3.1 fugu mod-IMPROVES SCROLLING/RESPONSIVENESS
All new init.d files---PARTITION MOUNTS,CACHE,SYSCTL,KERNEL
Sysctl.conf----TWEAKS KERNEL AND I/O SCHEDULER
tweaked scaling governor----faster cpu performance
It has been reported to work on the Motorola Atrix, so that gives me hope for some additional improvements on the D3.
Sweet! Let us know how it works!
sent from my MONSTERDroid3 from the XDA app
Izeltokatl said:
Going to try this on the D3, its big in the fascinate world. May be worth a dev porting to the D3 specifically. I'm going to take the plunge though since we can do nandbackups.
http://forum.xda-developers.com/showthread.php?t=1236779
From the thread post:
Whats inside:
changed partition mounts--- for less data corruption
patched sqlite's----IMPROVES I/O
honecomb 3.1 fugu mod-IMPROVES SCROLLING/RESPONSIVENESS
All new init.d files---PARTITION MOUNTS,CACHE,SYSCTL,KERNEL
Sysctl.conf----TWEAKS KERNEL AND I/O SCHEDULER
tweaked scaling governor----faster cpu performance
It has been reported to work on the Motorola Atrix, so that gives me hope for some additional improvements on the D3.
Click to expand...
Click to collapse
So...howd it go?
evulhotdog said:
So...howd it go?
Click to expand...
Click to collapse
Perhaps not so well?
Sent from my DROID3 using xda premium
I have this mod applied on my mytouch 4g, made a big difference. Hope it works out for this device as well..
Wolfhere said:
Perhaps not so well?
Sent from my DROID3 using xda premium
Click to expand...
Click to collapse
I'm gonna test this myself in a few hours. Ill report back
Sent from my DROID3 using XDA App
Maybe his phone ripped a hole in space-time; He was sucked into another dimension.
Bobbar said:
Maybe his phone ripped a hole in space-time; He was sucked into another dimension.
Click to expand...
Click to collapse
Worst that happens is a bootloop and then you just boot into recovery and restore /system and you're back in business
Sent from my DROID3 using XDA App
erismaster said:
Worst that happens is a bootloop and then you just boot into recovery and restore /system and you're back in business
Sent from my DROID3 using XDA App
Click to expand...
Click to collapse
I looked throught the zip. It contains some files that the D3 doesnt have (or are in a different location). So some of the changes will probably do nothing.
Check out the newest from Hashcode. You can now restore from BP Tools. No need to flash and restore
Sent from my DROID3 using xda premium
Wolfhere said:
Check out the newest from Hashcode. You can now restore from BP Tools. No need to flash and restore
Sent from my DROID3 using xda premium
Click to expand...
Click to collapse
The .zips fail to install so this won't work on our phones. Not without tweaking.
And that's been out for over a week. I updated my recovey thread with it last week.
Sent from my DROID3 using XDA App
erismaster said:
The .zips fail to install so this won't work on our phones. Not without tweaking.
And that's been out for over a week. I updated my recovey thread with it last week.
Sent from my DROID3 using XDA App
Click to expand...
Click to collapse
I install the files inside the ZIP manually, it works out perfect and seems much smoother and with a better memory management now.
jchenny said:
I install the files inside the ZIP manually, it works out perfect and seems much smoother and with a better memory management now.
Click to expand...
Click to collapse
Did you do anything with the sysctl.conf and init.d?
Sorry for the delays... yes, as stated above, the zip files will not flash to the D3 (even though they do flash to the Moto Atrix??).
But you can definitely rip out files push them with Root Explorer or ADB commands. I haven't had time to mess with that but I may jump on it later today. Glad someone else tried and showed positive signs. That is encouraging.
I applied manually.
Don't notice any difference, really. But it may respond better to my finger. I'll have to run it for a few days.
Bobbar said:
I applied manually.
Don't notice any difference, really. But it may respond better to my finger. I'll have to run it for a few days.
Click to expand...
Click to collapse
Do we have init.d support? If not the init scripts probably wont do too much.
Willis111 said:
Do we have init.d support? If not the init scripts probably wont do too much.
Click to expand...
Click to collapse
I snatched the files from the latest SteelDroid to enable init.d. However I also used the scripts from that rom as well as they include alot the same tweaks.
I discovered that the sysctl.conf tweaks have no affect. We dont seem to have access to those adjustments. Perhaps because of our stock kernel?
for you, if you have a stock kernel to enable init.d .....
http://forum.xda-developers.com/showthread.php?t=1017291
I'm out of testing phase but decided to keep this up. This is just a stock kernel with a modified ramdisk to allow the use of scripts in a init.d folder. Its nothing special other than that. Ill start digging into getting an OC kernel going now.
This will work with any Thrill rom. The only exception is on Thrill Seeker you must go into /system/etc/init.d and delete the file called "999switch"
While anything is possible, this kernel will NOT brick your phone. It fully boots and, as far as I can tell, runs fine. Ive also included the stock kernel in a flashable zip. You flash them the same way you would flash a rom. NO wiping of anything is needed.
CMA_Test Kernel
CMA-test Kernel
md5: d2fa00a256b08a8ee805c484d58091c1
Stock Kernel
Stock Kernel
md5: b4cfc8225d7f105d5d9c50171fb873ae
I can confirm, everything works great.
Sent from my LG-P925 using XDA App
Removed kernel temporarily. Ill have a new upload up in a few.
It works excellent, hyoungjin...
I'm ready to cosign when you get it back up...
tekahuna said:
It works excellent, hyoungjin...
I'm ready to cosign when you get it back up...
Click to expand...
Click to collapse
yeah its still the stock kernel (hence, hyoungjin ). just a modified ramdisk to see if it will boot (which it did).
Can you guys run cpu spy and see if the phone is sleeping? (those that got it before i pulled it )
Yup, deep sleep 60%... 13 of the last 24 or so minutes..
tekahuna said:
Yup, deep sleep 60%... 13 of the last 24 or so minutes..
Click to expand...
Click to collapse
Thanks. What rom?
And kernel is back up for testing in first post (couldn't sleep).
I'd test it myself but the wifey unplugged my phone and now its completely dead and I can't find it...Ill have to ask her where it is in the morning
OP updated.
Sent from my LG-P925 using Tapatalk
Deep sleep works great, lol. Phone has been on an hour and 45 min was in deep sleep, phone only used 3% batt too.
Sent from my LG-P925 using xda premium
Is this 10e img?
Sent from my LG-P925 using XDA App
CallMeAria said:
yeah its still the stock kernel (hence, hyoungjin ). just a modified ramdisk to see if it will boot (which it did).
Can you guys run cpu spy and see if the phone is sleeping? (those that got it before i pulled it )
Click to expand...
Click to collapse
Have you tested it on any GB roms? If not i'm thinking of trying it out, do you think there's any risk of breaking my phone if I do or is a bootloop the worst case scenario?
Sent from my LG-P920 using XDA App
I dont think they are compatible... they have gb kernels by acura team.
Sent from my LG-P925 using XDA App
Battery life is looking fantastic with this.
I don't know if you were planning on doing another Thrill Seeker update rom or not. But if you do, can you throw this in the ROM?
And I don't suppose you could ask tekahuna if you can throw his OC kernal in the updated Thrill Seeker ROM if you do an update.
Suddenly the Thrill section is blowing up!
i cant delete the 999switch file .....im using root explorer
donavo said:
i cant delete the 999switch file .....im using root explorer
Click to expand...
Click to collapse
Did you click the r/o button up top to r/w mode?
damn it, wish i had the thrill with me to test,
i'm sol for now 'till i get home in two days.
now for some requests if i may
can you hopefully include this in your next release, please, just a simple and humble request
http://forum.xda-developers.com/showthread.php?t=1119530
Please post this on mediafire or something... all sites are down! I need to download this kernel! Plz!
Sent from my LG-P925 using xda premium
does anybody know if this would work with the cm7 for the thrill???
Sent from my LG Thrill 4G...
Trekfan422991 said:
does anybody know if this would work with the cm7 for the thrill???
Sent from my LG Thrill 4G...
Click to expand...
Click to collapse
Yes it will! But the download links are down
Sent from my LG-P925 using xda premium
bummer!! well i messaged acouple of people to see if they can upload it for us.
Sent from my LG Thrill 4G...
Just as it says... Vibrant with ICZen ... if I adjust the CPU values for max/min and governer and even with or without set at boot checked, the settings revert back to stock ... any ideas? I've reflashed 4x and fresh installed... same thing
Sent from my SGH-T959 using xda app-developers app
svavrek said:
Just as it says... Vibrant with ICZen ... if I adjust the CPU values for max/min and governer and even with or without set at boot checked, the settings revert back to stock ... any ideas? I've reflashed 4x and fresh installed... same thing
Sent from my SGH-T959 using xda app-developers app
Click to expand...
Click to collapse
Look at the int.d files they may be over writing your settings at boot.
Vibrant 360° Productions
It would be more beneficial if you posted ICZ bugs in the forum where I actually host the rom, we have a ton of great minds over there that are more than willing to help.
That being said, what are you using to set the CPU values? If using the AOKP controls, yeah, they won't hold. Use NSTools, free from the market, and your values should stick.
svavrek said:
Just as it says... Vibrant with ICZen ... if I adjust the CPU values for max/min and governer and even with or without set at boot checked, the settings revert back to stock ... any ideas? I've reflashed 4x and fresh installed... same thing
Sent from my SGH-T959 using xda app-developers app
Click to expand...
Click to collapse
you just got lucky J and B posted before me.. I would've ran you over for posting a question in the Dev Section.
Questions, where do they go? the Questions section *gasp*
hi all...i need ur help....after i have flashed Team Venom ViperVIVO 1.1.0 rom into my phone using cwm everything is fine...but i need to overlock my phone so that it can run faster so i have decided to flash redux kernal 0.8 directly into the phone using cwm...but after i have rebooted i dont know where to adjust the overclock speed...it is just like i have done nothing to my phone after i have flashed the redux kernal inside...anyone can help me out? thanks a lot
Download Trickster Mod app from play Store.
Using your favorite cpu tuner (mines setcpu but you can use something like antutu just search play store for cpu) set max to 1600 and min to 360 than put a screen off profile at 360 and 240 (values are approximate). Once done DO NOT check "set on boot" as incompatible setting can put you in a boot loop.
Link to antutu cpu master (free)
https://play.google.com/store/apps/details?id=com.antutu.CpuMasterFree
Sent from my Incredible S using xda premium
but everytime when i reboot the setting keeps on revert to stock...any idea? thanks a lot =D
jasonyoong1 said:
but everytime when i reboot the setting keeps on revert to stock...any idea? thanks a lot =D
Click to expand...
Click to collapse
Using trickster?
Sent from my Nexus 7 using the xda app
both antutu and trickster....i put 61 and 1490 but after reboot it gives me back to 245 and 1024
jasonyoong1 said:
both antutu and trickster....i put 61 and 1490 but after reboot it gives me back to 245 and 1024
Click to expand...
Click to collapse
Did you press menu and set on boot?
for antutu u nv put coz i scared bootloop as the person mention above...but i dono where is the setting for set on boot for trickster
Press menu within the app and the first option is set on boot.
Forgot to mention if your on a post gingerbread rom, you can set on boot however being on gb and running cm7 I opt out, rarely seems to be a problem as my phone is almost never powered off.
Sent from my Incredible S using xda premium