Related
I have been using the 8925 for about 3 weeks now. On occasion, my phone will act as if I have a weak signal. Choppy voice etc., on both ends even when connected to a landline. The signal strength will usually have at least 2bars, W/ 3G displayed. The phone will play audio & video W/ out chopping or skipping and this doesn’t always occur in the same area, so I'm unsure what would be causing this. Any comments or advice (pertaining to my issue ), would be greatly appreciated.
Tobe
what network are you on are u using a sim or a usim
how old is your sim
do you have a spare handset to try your sim in?
have u raised this with your carrier? any known site issues in your area
have you tried manually roaming to see if this fixes the problem?
yea mine is also kinda poor too.
i have a cingular 3g sim card, i can put it in my sda and get full bars, but with this i get 2 bars most of the time.
they say this happends when your phone is connected to 3g and phone at the sametime. try turning off the 3g and initiating a call again
Turn off 3G?
I appreciate the replies.
1. I am on the At&T network
2. Sim
3. No spare phones to sim swap
ChInEsE ChIcKeN said:
this happends when your phone is connected to 3g and phone at the sametime. try turning off the 3g and initiating a call again
Click to expand...
Click to collapse
Since I am located in a major city, 3G is on all the time. Shouldn't the device automatically make voice a priority over data once a call is made or accepted W/ out the user having to shut it down? Let alone having to tell the person on the other end; "Let me call you back, I have to turn off the 3G so my calls won't sound like shizit."
Tobe
**Update**
At&T told me they performed an over the air sync to my device. So far, I have not sen any improvement. I've even tried to shutdown the data before talking on the phone. Now AT&T is telling me to return the phone, since I only purchased it on Nov. 14th and they now believe the device is faulty.
Tobe
Here we go again
This is my second 8925 now & still the same thing W/ chopped up conversations, even when I have full bars and am making calls to landlines.
I have tried to disable the 3G prior to calling etc. Also, this never seems happen in the same area, so I don't think it's a coverage issue.
Is anyone else having this problem on the at&t network?
Thanks,
Tobe
I was having alot of the same issue until I upgraded my tilt to xda live 1.2 is current version. The new radio in that rom made a big difference in my neighborhood.
xda live 1.2
sirooga said:
I was having alot of the same issue until I upgraded my tilt to xda live 1.2 is current version. The new radio in that rom made a big difference in my neighborhood.
Click to expand...
Click to collapse
Umm ok, but did the xda live 1.2 rom improve the voice clarity as well?
before I got my phone I read about all the 3G problems people were having.
when I first got my nexus, there were no issues at all. no dropped service or connection.
I'm in a 3G area (looked at tmobile coverage map) and I see no reason for this to be happening.
my phone will show that I have 3G connection (UMTS) but when trying to use anything that requires a connection, it fails.
on the other hand, HSDPA network works fine and so does EDGE.
I got my phone over a month ago and this hasn't started happening until recently.
I'm always on EDGE network now and if I'm not on EDGE, I have to be on HSDPA in order for me a to send messages or use data connection.
UMTS is broken and does not give connection. I want to call HTC and see if they can replace it but I don't think they'd do it.
anyone else have the 3G problem? I'm sure a lot do, but is it only with UMTS?
This is not the "3g issue" everyone talks about. This sounds like you are either having network issues in your area, or did you flash a new ROM to your phone recently?
RogerPodacter said:
This is not the "3g issue" everyone talks about. This sounds like you are either having network issues in your area, or did you flash a new ROM to your phone recently?
Click to expand...
Click to collapse
I had been on a CM test build and hadn't flashed a rom in a long time.
network issues isn't the problem because my friends G1 yesterday had 3G and I had EDGE.
I don't think it's my SIM card either, not even two years old.
I'm tempted to call HTC because this happened out of nowhere after a good month of no problems.
99% of the time it's a carrier issue.
When the number of users on a carrier grows or jumps on the carrier, the tower signal shrinks it's radius. And if you're in two competing tower areas, then your signal might drop/fluctuate because the phone is swapping between them.
Nothing the phone can do about it. It's probably your carrier issue.
how can that be when my friends right next to me have full bars and 3G while I'm on edge?
-------------------------------------
Sent via the XDA Tapatalk App
dudebro said:
how can that be when my friends right next to me have full bars and 3G while I'm on edge?
-------------------------------------
Sent via the XDA Tapatalk App
Click to expand...
Click to collapse
Change your settings to WCDMA only then.
I've tried and all I get is no connection or occasionally hsdpa.
-------------------------------------
Sent via the XDA Tapatalk App
I have experienced something like this. I am unrooted and few weeks after having the phone I would see a 3g symbol but be unable to access any data. It has been very frustrating once but generally it kicks in again with a reboot.
A similar issue since installing froyo is that the stock browser wouldn't connect. Other browsers and applications could access data but the stock browser couldn't. It started again later but I now use xscope.
I love android but I hope that the continue to work on its stability because it could be improved
benjatt said:
I have experienced something like this. I am unrooted and few weeks after having the phone I would see a 3g symbol but be unable to access any data. It has been very frustrating once but generally it kicks in again with a reboot.
A similar issue since installing froyo is that the stock browser wouldn't connect. Other browsers and applications could access data but the stock browser couldn't. It started again later but I now use xscope.
I love android but I hope that the continue to work on its stability because it could be improved
Click to expand...
Click to collapse
so is your 3G working now? I'm just going to call HTC and see what happens.
I've tried WCDMA only, flashing a radio, and anything I can find on the web but no luck.
dudebro said:
so is your 3G working now? I'm just going to call HTC and see what happens.
I've tried WCDMA only, flashing a radio, and anything I can find on the web but no luck.
Click to expand...
Click to collapse
Have you tried modifying your build.prop? If not, do a quick search and see if modifying it helps...
chowlala said:
Have you tried modifying your build.prop? If not, do a quick search and see if modifying it helps...
Click to expand...
Click to collapse
what should I search for? I'm not familiar with modding the build.prop.
i have two one the htc one's and one will connect to 4g the other will not. anyone else have the same problem. also anyone know the ##code to get into the edit/program section?
greggwv said:
i have two one the htc one's and one will connect to 4g the other will not. anyone else have the same problem. also anyone know the ##code to get into the edit/program section?
Click to expand...
Click to collapse
are you leaving both on the table and checking or is one in your hand?
BrianBaker said:
are you leaving both on the table and checking or is one in your hand?
Click to expand...
Click to collapse
doesn't matter driving down road, in car next to each other. it is a replacement phone but it was brand new from the store just got it setup last night
greggwv said:
doesn't matter driving down road, in car next to each other. it is a replacement phone but it was brand new from the store just got it setup last night
Click to expand...
Click to collapse
the one that has 4G pick it up and due something that uses data and see if it drops to 3G
Heres the code
Tesiting
*#*#4636#*#*
Field Trial
##33284#
BrianBaker said:
the one that has 4G pick it up and due something that uses data and see if it drops to 3G
Click to expand...
Click to collapse
it doesn't can run speed test on it and get 25-28 mbps everytime my original phone did as well
greggwv said:
it doesn't can run speed test on it and get 25-28 mbps everytime my original phone did as well
Click to expand...
Click to collapse
found in the testing screen the preferred network was set to cdma only, not cdma + lte/evdo auto like my other phone but it wont stay to the other, don't know if that is it or not
I'm having the same problem.
Sent from my HTCONE using xda app-developers app
I wasn't able to connect to LTE until I changed my network mode under Settings > Mobile Data to either Automatic or LTE/CDMA. It was defaulted to CDMA Only.
~ Sent from the HTC One ~
greggwv said:
i have two one the htc one's and one will connect to 4g the other will not. anyone else have the same problem. also anyone know the ##code to get into the edit/program section?
Click to expand...
Click to collapse
Hmmm..I just exchanged my silver for a black one and also cannot get 4g. My wife has one and hers gets it just fine. My old one did as well. I have checked all the setting suggested above and still nada. Seems this one is going back as well.
I'm on my 2nd HTC one and it operates the same as my 1st one.. In the dock of my car it connects to 4G just fine..with in a few seconds of handling the phone it drops to 3G..It works fine in great signal areas but on the out skirts of an LTE tower it just won't hold 4G..
Sent from my HTCONE using xda premium
Update prl and update profile
Im in the same boat. Seems like 4g is HORRIBLE with this phone. Had the Note 2 and wife has GS4 both pick up 4g no problem, but the One picks up 4g for couple seconds then drops off completely. Yes, I tested this in the same areas.
really bummed out cuz I got the phone used so i can't return it. Love the phone, but its useless if i can't get 4g because Sprint's 3g is so slow its unusable.
slayer69 said:
Hmmm..I just exchanged my silver for a black one and also cannot get 4g. My wife has one and hers gets it just fine. My old one did as well. I have checked all the setting suggested above and still nada. Seems this one is going back as well.
Click to expand...
Click to collapse
Well I just exchanged my black and went back to silver and still the same issue. I am starting to think the guy that set up my phone on my account jacked something up. I have been all through the service provisioning matching it to my friend that has one....and only found one difference. Seems my phone is only picking up CDMA-EVDO Rev-a instead of CDMA - eHRPD. When I change the prefered network from LTE/CDMA it will try to connect to eHRPD but then switches back to EVDO and no 4G. So I will try to call sprint and have them inspect my account as I have not seen a way in the service programming to force eHRPD. It would be nice to have the others that are having this issue check the Mobile network type as well and see what they are running.
Try not touching the phone and see that it holds 4G until you touch it...I know its pretty useless to not be able to touch your phone but this has been my experience.
In my experience, not touching the phone does not seem to fix the problem. I do notice a small signal loss if I have the left side of the phone against the palm of my hand. The real issue here seems to be related to the phone having some sort of broken threshold from when to switch to 3g to 4g and how much better the 3g signal has to be in order to decide to switch off of 4g to 3g.
I noticed that the LTE Scan Time is set way higher than what the EVO LTE is set to with latest firmware (300 on the HTC One vs 5 on the EVO LTE). I have not had much time to test changing this to see if it makes a real difference or not though. You can check what your LTE scan time is set to in ##3282#. You will need to get your MSL to change it if you want to do that (there is a method to get your MSL without rooting here on XDA).
Another thing you can try to see if it is indeed a reception problem or a problem with the phone not switching between 3G and 4G smartly is to set the phone to LTE / CDMA(1xRTT) only. You can do this in *#*#4636#*#* under the phone information submenu. Tap where it says "CDMA + LTE/EvDo auto" and change it to "LTE, CDMA" or even "LTE only".
kwolf said:
In my experience, not touching the phone does not seem to fix the problem. I do notice a small signal loss if I have the left side of the phone against the palm of my hand. The real issue here seems to be related to the phone having some sort of broken threshold from when to switch to 3g to 4g and how much better the 3g signal has to be in order to decide to switch off of 4g to 3g.
I noticed that the LTE Scan Time is set way higher than what the EVO LTE is set to with latest firmware (300 on the HTC One vs 5 on the EVO LTE). I have not had much time to test changing this to see if it makes a real difference or not though. You can check what your LTE scan time is set to in ##3282#. You will need to get your MSL to change it if you want to do that (there is a method to get your MSL without rooting here on XDA).
Another thing you can try to see if it is indeed a reception problem or a problem with the phone not switching between 3G and 4G smartly is to set the phone to LTE / CDMA(1xRTT) only. You can do this in *#*#4636#*#* under the phone information submenu. Tap where it says "CDMA + LTE/EvDo auto" and change it to "LTE, CDMA" or even "LTE only".
Click to expand...
Click to collapse
Issue resolved for me! After 6 phone exchanges I was able to uncover what was causing the phone to not get on eHRPD which is Sprints upgraded software on the towers. I called sprint support and made them verify my UICC ID under about/phone identity, this also is the same as number as the SIM id. They did not match what was on my account. I went back to Best Buy and they called activation's and they sent a profile update with the correct SIM and UICC ID and it solved the issue. No more 104 data issues and I can get 4G now. WOO HOO!
I do want to say that Sprint really went to bat for me to get this resolved. I have to say thanks to the San Diego Sprint rep who kept in touch with me through out all of this.....Thank you man!!!
slayer69 said:
Issue resolved for me! After 6 phone exchanges I was able to uncover what was causing the phone to not get on eHRPD which is Sprints upgraded software on the towers. I called sprint support and made them verify my UICC ID under about/phone identity, this also is the same as number as the SIM id. They did not match what was on my account. I went back to Best Buy and they called activation's and they sent a profile update with the correct SIM and UICC ID and it solved the issue. No more 104 data issues and I can get 4G now. WOO HOO!
I do want to say that Sprint really went to bat for me to get this resolved. I have to say thanks to the San Diego Sprint rep who kept in touch with me through out all of this.....Thank you man!!!
Click to expand...
Click to collapse
I had the exact same problem. My phone will not connect to 4G LTE. I have a few questions. How do I know the UICC ID, SIM? Where do I find them under my account?
Thanks a lot
bondseven said:
I had the exact same problem. My phone will not connect to 4G LTE. I have a few questions. How do I know the UICC ID, SIM? Where do I find them under my account?
Thanks a lot
Click to expand...
Click to collapse
You have to call sprint customer care to have them verify what you have on your phone. I recommend calling from some other phone when you call though. Just explain that you are having issues with your data and you heard that sometimes the UUIC ID/SIM ID are incorrect. They might come back and tell you, "well thats for international only" but in fact the SIM ID is used for LTE from what I found out. Just insist (nicely) that you just want to try it.
On the phone you can see your SIM ID under settings/about/Phone Identity.
One way to see if this fixes the issue is look under settings/about/Network and look under Mobil Network Type. If it is always running in EvDo rev A. then you have the issue if the towers in your area have Network Vision updated towers.
Hope this helps...PM me if you want more information. I can also get you tower data in your area if you would like.
slayer69, Thank you so much for your quick response. My phone runs with EHRPD when it showed 3G, not rev. A. However, my phone had the same issue, not connecting to 4G/LTE. From time to time, it will show 4G signal on the bar. However, when I tried to use it, it will switch back to 3G. I will call sprint to verify if tI have the sim card issue.
---------- Post added at 08:10 PM ---------- Previous post was at 07:24 PM ----------
I talked with Sprint. It seemed that my SIM/UICC code is matched with the system. So my problem is still not resolved. I used an app to check the signal information, which showed that I have -70dB LTE signal. However, I just can't connect to LTE.
It seems that it is not only me. Check this link
http://www.gottabemobile.com/2013/0...ivity-issue-in-select-markets/#comment-231589
slayer69 said:
You have to call sprint customer care to have them verify what you have on your phone. I recommend calling from some other phone when you call though. Just explain that you are having issues with your data and you heard that sometimes the UUIC ID/SIM ID are incorrect. They might come back and tell you, "well thats for international only" but in fact the SIM ID is used for LTE from what I found out. Just insist (nicely) that you just want to try it.
On the phone you can see your SIM ID under settings/about/Phone Identity.
One way to see if this fixes the issue is look under settings/about/Network and look under Mobil Network Type. If it is always running in EvDo rev A. then you have the issue if the towers in your area have Network Vision updated towers.
Hope this helps...PM me if you want more information. I can also get you tower data in your area if you would like.
Click to expand...
Click to collapse
Thanks to all in this thread. I had the same problem while in Oakland. My wife has an S2 on sprint and she had a strong 4g connection and mine was stuck on 3g. Now if this is a hardware issue that this phone has what if anything can we do. Can we exchange for a different device
Sent from my HTCONE using xda app-developers app
Anybody else on Verizon using a Verizon brand extender? A search found one other old thread but no definitive fix. The one proposed fix was to set the phone to 1x speed to force it out of hunting for towers outside and hope that 5.1 fixed the problem. I just got my phone from Verizon, it came out of the box with 5.1, so it would seem they didn't fix it. And I can't seem to find how to set it to 1x. Only from global to LTE. I'm dropping calls, having problems with texts, and Verizon support admitted it doesn't seem that my calls are going through the extender. They said the 6 should be perfectly capable of utilizing this extender. My note 3 worked perfect on it, and as far as I know the wife's note 4 does as well. I get the beep like it's calling through it, just not the signal. And this phone doesn't have a separate icon to show if it's connected, intermittent, or never recognizing it. Is this a known issue and I just didn't search properly? Running 5.1 LMY47E, bone stock. I warrantied the phone, same thing. So this thing is literally about an hour out of the box, no mods. Looking forward to rooting and running some roms but I'd like to know I've got any issues ironed out before hand. That way I'll know any future issues are rom related, not hardware
TIA
Unfortunately there is no fix unless Verizon decides to somehow upgrade the software/firmware of the extender. I'm surprised that Verizon tech support didn't inform you that the extender is not capable of utilizing 4G or enhanced network capability and can only function with 3G or less. I spent a bit of time on the phone with tech support and requested a problem ticket be raised to Verizon engineers to get a definitive answer -their response was that the extender can not do 4G but only 3G. The way I was able to get my Nexus 6 to successfully connect was to turn the "Enhanced 4G LTE Mode" off and then it was able to connect. This is not a nexus 6 issue only but from what I've seen is any phone that has that enhanced 4G setting - my wife's Iphone 6 is also unable to use the extender unless that phone capability to use 4G/LTE is turned off. Surprised you even got the beep as never of our phones get that connection beep unless the 4G/Enhanced switch is off.
I'm surprised (maybe not) that Verizon continues to sell the same Network Extender even though it no longer works with the new network capability or with phones that use that technology. Also brought that up with them during my call but of course that wasn't addressed. I also got no information as to any plans to upgrade the extender firmware but I'm assuming the lack of info speaks loudly.
Again one can never be assured of whether the information they provided me is accurate or no so if you find out differently please post back.
Also, my Nexus 6 is rooted and I have tried numerous ROMs and the ROM makes no difference so that isn't going to fix the issue.
Hopes this helps a bit.
chameo53 said:
Unfortunately there is no fix unless Verizon decides to somehow upgrade the software/firmware of the extender....
Again one can never be assured of whether the information they provided me is accurate or no so if you find out differently please post back.
Also, my Nexus 6 is rooted and I have tried numerous ROMs and the ROM makes no difference so that isn't going to fix the issue.
Hopes this helps a bit.
Click to expand...
Click to collapse
This helps a ton, thanks! I've always known that the extender didn't support anything above 3g, but it's never been an issue since my router took care of data and 3g was plenty for calls and texts. But I was thinking it had something to do with this... I haven't researched any of this new stuff about xlte or whatever it is but I know it seems the phones are changing to support some mods to the network. I haven't paid attention because my town is usually the last to receive this sort of technology. Big cities were going to 4g soon after we upgraded to 3g...
Can you tell me if the pic below is the menu that you used? I can't find any setting anywhere else that specifically says 3g, to try to force it into a mode that the extender understand.
you can dial #48 and the phone will tell you if you are under network extender coverage
The setting that needs to be disabled is on the same screen where you set the preferred network type (actually under the one you are displaying). It should be the next setting following the Preferred network type. It actually has a slider to turn on or off. Now, I'm not running stock but I believe it should be the same or very similar on stock.
Not on my phone or i'd try to include a screenshot. Hope this helps.
Edit : Added Screenshot
three west said:
you can dial #48 and the phone will tell you if you are under network extender coverage
Click to expand...
Click to collapse
Oh yeah, I forgot about that detail. The Verizon tech had me do this. It actually told me I was connecting through the extender. And the call seemed relatively clear. But I could hang up and immediately dial my voicemail or some other number, get the beep from connecting through the extender, but the call would be spotty and cutting out badly. And the tech was confused by this because it wasn't showing on his system that I was connecting through the extender even when the #48 said I was. Strange things going on with this...
chameo53 said:
The setting that needs to be disabled is on the same screen where you set the preferred network type (actually under the one you are displaying). It should be the next setting following the Preferred network type. It actually has a slider to turn on or off. Now, I'm not running stock but I believe it should be the same or very similar on stock.
Not on my phone or i'd try to include a screenshot. Hope this helps.
Click to expand...
Click to collapse
I'm not typing on my phone either, to include a screenshot. But I'm looking at it. The option directly under Preferred network type (which I have changed back to the default Global), is System Select. The subtext under that says "Change the CDMA roaming mode". And within the menu, the two options are "Home only" and "Automatic", of which Automatic is the default. Is this what I'm looking for?
Do you have Advanced Calling activated on you phone? Not sure if that is the issue or not but on your Verizon Wireless account you should see Advanced Calling (I believe that is what it is called) under "Manage Products. & Aps" - you should have the option to add it to your account. It is a free service but as I understand it you need to include it on your account for the phone to use Volte and it might not show up in settings if it is not an active service on the phone. Again, I'm only guessing here since I'm not on stock but I do believe I've had the option since I got the phone and I added HD calling right after I completed the pre-order.
chameo53 said:
Do you have Advanced Calling activated on you phone? Not sure if that is the issue or not but on your Verizon Wireless account you should see Advanced Calling (I believe that is what it is called) under "Manage Products. & Aps" - you should have the option to add it to your account. It is a free service but as I understand it you need to include it on your account for the phone to use Volte and it might not show up in settings if it is not an active service on the phone. Again, I'm only guessing here since I'm not on stock but I do believe I've had the option since I got the phone and I added HD calling right after I completed the pre-order.
Click to expand...
Click to collapse
I will log on in a bit and look. So are you suggesting that I enable it, or disable it? Is it believed that HAVING this feature is what is killing the link to the extender? Sorry for the dumb questions. Like I said, I've never had to look into the new tower technology before because I don't anticipate getting it in my area. I never thought about it still affecting my service anyway, even though we weren't getting it... figures.
For me to use my extender the 4G enhanced/LTE needs to be disabled. What I don't know is whether that setting shows up on the phone if the Advanced Calling isn't active on the account. If it doesn't show up there might be no way to disable it. I know it sounds somewhat illogical but again
I'm guessing to some extent given that I have it on mine and I really think it has been there from the start.
Sorry I can't be definite with it.
I update to 222.21.15.Ghost_ro-Retail.en.US I couple week ago and I have notice that You Tube sometime will stop the playback and just get stuck, also when I unlock my phone or lock it some time I get a crackle sound coming from the rear speaker, almost like it a re-verb sound from the lock sound.
I have cleared the cache partition and I have rest my phone from the back up and restore option. And that has not change these two thing from happening. The rest of the phone seams to be working find I don't know what else to do to fix this problem.
Same problem here with YouTube playback... 222.27.1.ghost_row.02.en.DE
Sent from my XT1052 using Tapatalk
Try going to Settings > About Phone and enabling Developer Options by tapping on Build Number several times. Then press the back button and tap on Developer Options and scroll almost all the way to the bottom until you get to the Media section. Try enabling/disabling Use AwesomePlayer (Depreciated) and see if that helps.
Thanks that tip seems to have fix the YouTube playback problem. Any ideas on the crackling sound made at random moments.
Sent from my XT1053 using XDA Free mobile app
al970h said:
Thanks that tip seems to have fix the YouTube playback problem. Any ideas on the crackling sound made at random moments.
Sent from my XT1053 using XDA Free mobile app
Click to expand...
Click to collapse
Couldn't tell ya. I haven't had that problem yet so I can't offer a fix.
I'm having the same sound problem on my AT&T Moto X as well. It comes up at random
Breezyno1 said:
I'm having the same sound problem on my AT&T Moto X as well. It comes up at random
Click to expand...
Click to collapse
I just started having it. Totally random when starting a YouTube video, now it happens when I touch system items like home, back, the app drawer. Keyboard seems fine though.
DarkWolffe said:
I just started having it. Totally random when starting a YouTube video, now it happens when I touch system items like home, back, the app drawer. Keyboard seems fine though.
Click to expand...
Click to collapse
So it's a software problem then. I hope Motorola can fix this soon
Breezyno1 said:
So it's a software problem then. I hope Motorola can fix this soon
Click to expand...
Click to collapse
Definitely software. It's totally sporadic. It stopped last night as I went to bed and then picked up this afternoon when I was texting someone.
Would re-flash using the
MOTO X, GSM Dev Edition:L-5.1-LPA23.12-15 (Retail) LMR1 fixe these software glitches. And if I am on lock bootloader do I need to unlock before flash this per Motorola instructions.
Sent from my XT1053 using XDA Free mobile app
Anyone else having problem with cell data connection? Wifi works fine but cell does not connect. I have this problem using PTel (T-Mobile MVNO w/ LTE) and H2O (AT&T MVNO w/LTE). Truphone which is both T-Mobile and AT&T MVNO but has not LTE can connect but drops the signal quite often even in areas whith strong signal (-75 dbm or better).
I have checked the APN settings for all, cleared cache, done a factory reset and the problem persists. Before the 5.1 update I had absolutely no problem using all three providers listed above. Any suggestion is welcome since I am running out of idea and the next step is calling Motorola.
skyboysea said:
Anyone else having problem with cell data connection? Wifi works fine but cell does not connect. I have this problem using PTel (T-Mobile MVNO w/ LTE) and H2O (AT&T MVNO w/LTE). Truphone which is both T-Mobile and AT&T MVNO but has not LTE can connect but drops the signal quite often even in areas whith strong signal (-75 dbm or better).
I have checked the APN settings for all, cleared cache, done a factory reset and the problem persists. Before the 5.1 update I had absolutely no problem using all three providers listed above. Any suggestion is welcome since I am running out of idea and the next step is calling Motorola.
Click to expand...
Click to collapse
My data connection has been really good post-update, so I can't offer any assistance other than what you've already done. I would definitely confirm from your carriers which APNs you're supposed to be using and/or call them/Motorola about it.
Try different apns. Sometimes I need to try a few different ones listed before the phone works. Make sure you save the APN
i also had The crackling sound on my moto xt1053 but it was a gravitybox (xposed module) setting I had enabled. after I disabled that and rebooted the problem vanished. This may help others
Enviado desde mi XT1053 mediante Tapatalk
I've had mobile data connections problems saying something like "failed sign in attempt with AT&T network" and the crackling speaker.
I called AT&T, who did something on their end. It did work, but when I switch from WiFi to mobile there is a moment or two when the !sign-in failed symbol pops up. But, the signal returns soon.