I Bought a Tab I am assuming is an unlocked UK Tab. I flashed wrong junk on it and it wont boot up. Now I need to flash stock or something good. Is there anything on the box or devise to tell where it is from so I know what ROM to download, or does that matter?
thanx
H
Well I got it back to factory without re-flashing, but I would still like to know what GT I have. It says, GT-P1000
Open the dialler application and dial (with stars and sharps):
*2767*4387264636#
Hey everyone,
I have a Samsung Galaxy Tab running Overcome 1.6.3
I've been having an issue with it overheating and turning itself off (nothing to do with the custom ROM, was doing it before, I was hoping the custom ROM would fix it but it didn't).
I rang Samsung about it and they told me to take it back to where I bought and get them to send it in to me.
My issue is that as soon as they see that it's running a Custom ROM they'll send it straight back to me!
Basically I'm trying to work out the Optus Factory ROM / Modem / PITT files so I can put the correct files back on using ODIN.
Does anyone have a stock Optus Galaxy Tab they can give me all the info for?
PDA: ?
PHONE: ?
CSC: ?
Model Number: ?
Firmware Version: ?
Kernal Version: ?
Build Number: ?
Thanks,
Mitchell !
you could try reading this - http://forum.xda-developers.com/showthread.php?t=1047516
might get an answer quicker =)
Thanks, hadn't seen that.
Will move the question
the firmware my tab came with was JJ4, but when I got it back from repair it came with JMA, so it is hard to say what you should have
Thanks!
I ended up ringing one of the stores and asking them to read me out all the numbers off the Display model (figured it had never been updated).
It is as follows:
PDA: P1000XWJJ4
PHONE: P1000XXJID
CSC: P1000OPSJJ3
I was able to get the PDA + PHONE default files, but I could only get a default CSC file (SERJJ2) because no one had posted the Optus CSC file.
I'm restoring it all now, will let you know how it goes, cheers !
Hi there,
Did you get it working?
I am trying to restore my optus galaxy tab using odin as well, its a nightmare!
I also have the first two files (and not the csc file), but dont know how to do it.
I have the gt-p1000_mr.pit file loaded in odin along with the PDA and phone one (P1000XWJJ4 & P1000XXJID). I have the three boxes ticked, auto reboot, repartition, f. reset time etc. then i press start. It updates for a while then fails near the end. What am I doing wrong? Is it because i dont have the csc file or is there a certain order to do things?
karfeef said:
you could try reading this - http://forum.xda-developers.com/showthread.php?t=1047516
might get an answer quicker =)
Click to expand...
Click to collapse
By the way this link doesn't work
Hey, yep I did end up getting it fixed !
Just at work at the moment but I'll post detailed instructions when I get home !
Awesome! This little saga is almost making me consider splashing out and going ipad, but I am being patient. I think theres a learning curve and then all will be good no? or have you got rid of yours since haha
All is good
I ended up finding teamovercome.net and installed their ROM which Im happy with so far. No optus stuff which is a plus
Hey, sorry for the delayed reply. The time zone difference thing over here is still messing with my head. Glad to hear you got it all sorted. I had a look back through all of my stuff and like an idiot I don't have anything saved any more, but oh well.
Haven't gotten rid of mine, but haven't touched it for about a month and a half, since moving over to the US, and not wanting to pay for a SIM card for it.
which version rom are using from overcome and is there any problems with using it on the optus network
This My Optus Samsung Galaxy P1000
This My Optus Samsung Galaxy P1000
PDA P1000XWJM1
Phone P1000XXJMA
CSC P1000OPSJM7
Firmware 2.2
Kernel 2.6.32.9
FROYO.XWJM1
I give you a copy if new how to copy the Firmware
being you are in Brisbane like me , See you not anymore
Any Link to tell you how?
Hello everyone, sorry if this thread is in the wrong section
I have a Samsung Galaxy Tab GT-P1000 on Orange UK and would like to update the OS. I have asked Orange several times when 2.3.4 will be out for the GT-P1000 and always get the same answer saying they have no info. I wish to update it but I don't want to do anything that would void it if anything goes wrong in the future. My question is what would be the best way of getting 2.3.4 onto the GT-P1000 without voiding warranty or anything like that? It is sim locked to Orange UK also and not sure if unlocking it would open it up to be able to use KIES to update it? I really am very much a novice with all this
Hi everyone,
This is my first time and I am wondering if someone can help. I have tried everything and nothings far.
I have SG SII few weeks ago someone mentioned that ICS was out so I googled it and followed the instructions which installed i9100xxKP8 4.0.3 version and at the first start the phone does not recognise any SIM card you put. I know I made the mistake not noted down the original firmware number etc.. But I am stuck I can't use Kies to upgrade to the proper O2 upgrade which is out.
Any help would be appreciate it before I bin this lovely phone .
Thank you
Wessam
Firstly this is the wrong forum this forum is for the Samsung Galaxy S (Not SII/2).
Luckily this is not a phone specific thing all that much.
To get your stock rom go to sammobile.com. Find the firmware that best matches your situation, i.e. country and provider. There are also downloadable instructions. Another thing you could do is go to your correct forum and look for the correct firmware.
To be clear all you have to do is install the stock firmware and your phone should be recognised by Kies. If this doesn't happen then you may have to make another post in the correct thread. A fix you could try (not sure this will work on S2) is type *#262*your imei# and select the correct csc code (Changing the code will reboot your phone and perform a factory reset). Also find this on the sammobile.com website, i think letter codes or something.
Hello,
I'm from Malaysia and recently I just bought used Note 5.
After using it for sometimes, when I try to login into one app (which doesn't work for a rooted devices) then I realized it the phone is already rooted.
After further checking the phone, I found out that the phone is a Verizon set and now running on Android 5.1.1.
Currently the phone works just fine and I'm able to use it in Malaysia. (except for those app which not allowing the rooted devices).
I'm planning to reformat the phone to stock rom and my question is whether the phone still can be used in Malaysia or it will locked under Verizon?
Hope you guys can help and advise me on this matter.
Thanks
Regards,
sodok