[Q] WP 8.1 and Ativ S UNABLE to connect with 3G - Windows Phone 8 Q&A, Help & Troubleshooting

Good evening to everyone.
As the title says I did a hard reset of the device (I had some problems for cell calls with the new update, people coudn't hear me sometimes) and I'm now UNABLE to connect to everything with 3G, the setting is displayed on the active center but I can't navigate anyway.
Anyone else who had the same problem?
PS: In the settings:
3g Activated, tried with both automatic research and manually set up my phone manager;
Power saving inactivated
I tried everything but would avoid to hard reset AGAIN.
Thanks in advantage

Check the APN, make sure it's correct and/or try setting it manually.

GoodDayToDie said:
Check the APN, make sure it's correct and/or try setting it manually.
Click to expand...
Click to collapse
Did it so many times, the phone worked but 3g didn't.
I flashed gdr2, interop unlocked my phone, then updated
Thank you

Related

HELP - Cannot connect 3G/GPRS/EDGE/HSDPA problem

Hi Friends!
Now seems that I have a serious problem, my Kaiser still with the "Cannot connect" problem, displaying the following message in any data transfer attempt:
"Cannot connect for an unknown reason. To check your connection settings and change them if needed, tap Settings. If the problem continues, reset your mobile device according to your manufacture's documentation and try again."
Ive checked the connection settings lots of times, tried all RADIO versions.
Tried setting network band manually for GSM, PAP and CHAP authentication, enabled and disabled HSDPA without success.
The same SIM card works perfectly in another cell phone, but other SIM card (from other operator) didn't work either in my Kaiser.
Ive noticed, doing some internet search, that this problem used to happen in other HTC models, but I couldnt figure a way to solve the problem or what were its true origin.
Tnx in advance for your attention and help!
-credea-
does any body know the solution for this problem...
please help...
try flashing the stock rom and see if it works, if it does just try a different rom. if not, leave the stock rom and call customer support.
i got the same problem here ..
connecting using reguler GSM / GPRS working fine ..
but when i use 3g/hsdpa .. it's immediately disconnect with the same error ..
helppp
noodles21o2 said:
try flashing the stock rom and see if it works, if it does just try a different rom. if not, leave the stock rom and call customer support.
Click to expand...
Click to collapse
I had tried flashing it with the stock ROM and it didn't work... still have the problem... Thanks anyway...
Any other suggestion?
thanks,
credea
similar issue, now happened twice
I had this issue once before. After getting the run around, they determined that the radio was bad. I sent it in and they replaced it. Now a year later i am having the same issue. I have noticed that if i am traveling(driving), ocassionaly it will start to work again. I "think" that gprs works, but when it changes to "edge" it fails, or just works for a few hours....
Bye the way, I am using an unlocked phone on t-mobile.
Have you tried running removeHiddenProxy4CWS_1219.cab?
Look it up in the forum, then install it to Device.
wisniak said:
Have you tried running removeHiddenProxy4CWS_1219.cab?
Look it up in the forum, then install it to Device.
Click to expand...
Click to collapse
I don't think that proxy setting is the main problem... I've tried running removeHiddenProxy4CWS_1219.cab but the problem still exist...
regards,
-credea-
Hmmm
Does this message appear when emailing only?
Or does it appear also when browsing, say by using PIE?
Last week I had a problem where I couldn't email at all on my Tilt nut was able to browse.
I put my SIM card on my E51 and no problems at all.
I went back to my Tilt, tried everything I could think of w/o success, so I finally had to HR and reinstall (this was the 1st time even a restore from a previous good backup didn't help).
oppps - duplicate...
wisniak said:
Hmmm
Does this message appear when emailing only?
Or does it appear also when browsing, say by using PIE?
Last week I had a problem where I couldn't email at all on my Tilt nut was able to browse.
I put my SIM card on my E51 and no problems at all.
I went back to my Tilt, tried everything I could think of w/o success, so I finally had to HR and reinstall (this was the 1st time even a restore from a previous good backup didn't help).
Click to expand...
Click to collapse
This message appear on all things that require internet connection via GPRS/EDGE/HSDPA. My SIM Card work well on other device
I've restored my phone to OEM Status by flashing the OEM ROM to my device (i did for its bootloader too), but still it didn't work...
Problem solved
Problem solved... it's just network setting...
credea said:
Problem solved... it's just network setting...
Click to expand...
Click to collapse
please,How do you fix it? I can't get any of my work emails or download MMS and such because of probaly the same issue?

Force Enable Internet Connection Sharing

Hey, everyone.
I just bought an ATT Samsung Focus S i937 off of eBay. It was locked when I received it, so I plunked down 25 bucks and unlocked it. I'm using it on Telus and so far all is well, except for WiFi connection sharing/tethering.
When I try to enable internet sharing, I get a message saying "Connection not shared. To enable tethering on this device go to (ATT's website) or dial 611."
Basically, it sounds like I need to have an ATT tethering plan to enable this on my phone, but since I'm not an ATT customer, there's not mch I can do.
I was wondering if there is a workaround for this. Please let me know!
Thanks,
Taylor
TaylorofCanada said:
Hey, everyone.
I just bought an ATT Samsung Focus S i937 off of eBay. It was locked when I received it, so I plunked down 25 bucks and unlocked it. I'm using it on Telus and so far all is well, except for WiFi connection sharing/tethering.
When I try to enable internet sharing, I get a message saying "Connection not shared. To enable tethering on this device go to (ATT's website) or dial 611."
Basically, it sounds like I need to have an ATT tethering plan to enable this on my phone, but since I'm not an ATT customer, there's not mch I can do.
I was wondering if there is a workaround for this. Please let me know!
Thanks,
Taylor
Click to expand...
Click to collapse
firstly DO NOT INSTALL THE SAMSUNG UPDATE!! and if updating the OSan have it unlocked already read This Website and use the relock prevent + edit your hosts file
Absolutely back up your device at every stage using This Guide
So follow these steps
unlock the device Here follow the instructions which includes installing the diagnostic tool and install XAP deployer or XAP handler Here or Here With the XAP file deployer in the WP7 SDK
Then install WP7 Root Tools Here
Then install WP Bazaar market Here
Open Root Tools, and give Bazaar higher level privileges
Find WinTT on the Bazaar market and install it
Open Root Tools, and give WinTT higher level privileges
you may need to restart to get WinTT working
go through WinTT and turn on ICS
Done
Wow thanks.
That's very complete. One questions though... I didn't mention this, but I am a registered WP7 dev and can unlock this device using my dev access. Can I load any of the XAPs directly instead of having to crack my phone?
Thanks,
Taylor
Yeah, you have limited access to installing xaps, but you will still need to interop unlock and use root tools to give higher level access to WinTT, so your best starting from scratch,
Sent from my SGH-i937 using XDA Windows Phone 7 App
Unable to understand the process
I have purchased an Samsung Focus S i937 locked to AT&T. I have purchased an unlock code and have successfully unlocked my phone. Im also unable to use the Internet Sharing feature of my phone. Firstly, I am not a technical guy hence im unable to understand the process stated by you. Secondly, I wanted to find out that does following the process given by you, expose my device to get BRICKED as I am able to understand that involved a JAIL BREAK of the device. Does it have any other side effects.? Like effecting the radio signals or any other such problem.
Thanks
abhijeetmohan06 said:
I have purchased an Samsung Focus S i937 locked to AT&T. I have purchased an unlock code and have successfully unlocked my phone. Im also unable to use the Internet Sharing feature of my phone. Firstly, I am not a technical guy hence im unable to understand the process stated by you. Secondly, I wanted to find out that does following the process given by you, expose my device to get BRICKED as I am able to understand that involved a JAIL BREAK of the device. Does it have any other side effects.? Like effecting the radio signals or any other such problem.
Thanks
Click to expand...
Click to collapse
ok, first things first.
You won't brick your device, at worst a hardrest all remove all changes you can do, our device, the focus S, isn't fully unlocked, so there are limitations to the amount of damage you can do by arseing it up. With that behind us you have to learn what you are about to do, there isn't a simple way.
So, start by knowing these basics, then read through the guide, any bits you don't understand feel free to ask.
1, AT&T locked your internet connection sharing, so you must re enable that
2, To enable ICS, you must make changes to the registry
3, Microsoft locked you out of making changes to the registry, so you must gain access to do it
4, AT&T left a security hole allowing us to make changes to allow us to change things like registry
5, using that hole we can install software that will give us more access, that software can then allow us to remove the AT&T lock on ics
These things you must do, there is no magic answer, there has been some short cuts made but this in some cases has had a negative effect, such as losing 3g, doing as I said will not have any effect on your signal or anything else
Sent from my Samsung Focus S using XDA Windows Phone 7 App
Have you guys noticed any of the following....
issues after the above procedures were applied (a big thanks to all the brainiacs who know how to hack this stuff):
Slowed Internet Connection
Lower Strength of GPS Signal
Less accuracy and trouble sometime finding location
Less accuracy while using maps because of the above statement
Not complaining, just curious. Thanks to all.:good:
7carisfast said:
issues after the above procedures were applied (a big thanks to all the brainiacs who know how to hack this stuff):
Slowed Internet Connection
Lower Strength of GPS Signal
Less accuracy and trouble sometime finding location
Less accuracy while using maps because of the above statement
Not complaining, just curious. Thanks to all.:good:
Click to expand...
Click to collapse
theres nothing in the code that should have done that, the XML import only fiddles with interop unlock
im not 100% sure what WTT changes but I know the entries it should be fiddling with and shouldnt make any difference, although its been suggested the ICS code does mess with the 3G signal ive not heard anything at all to suggest that it effects GPS as well.
See This Thread for details, ive copied the relevant bits here but all thanks should go to those on the original thread
Option 1
---- 11.3. If your device is not locked to a specific operator, you can use the Samsung Network Profile app (for 1st generation) or Wireless Manager (for 2nd generation)
-------- 11.3.1. Uninstall the Samsung Network Profile / Wireless Manager app.
-------- 11.3.2. Download and install the latest version of the Samsung Network Profile / Wireless Manager app from the Marketplace.
-------- 11.3.3. Open the Samsung Network Profile / Wireless Manager app.
-------- 11.3.4. Select a different Network Operator.
-------- 11.3.5. Now Select your own Network Operator again.
-------- 11.3.6. Exit the Network Profile / Wireless Manager app.
Option 2
Resolve Samsung connection problems
A lot of Samsung owners have complained here about connection problems. They blamed Interop Unlock, but apparently this has more to do with enabling "Internet Connection Sharing" than with "Interop Unlock". You should be able to recover the connection, apply this:
1. Start Diagnosis App> *#32489# ***DOES NOT WORK ON i937***
2. Tap "Back" 2 times to go back to Phone Control
3. Choose: [7] Network Control
4. Choose: [1] GFC
5. Choose: [3] Setting Cancellation
Wait for it to say success, then reboot.
GPS is a completely passive function, I don't have a problem with this, HSDPA may have issues for reasons unknown but using this method doesn't effect mine, perhaps its carrier specific..
dazza9075 said:
theres nothing in the code that should have done that, the XML import only fiddles with interop unlock
im not 100% sure what WTT changes but I know the entries it should be fiddling with and shouldnt make any difference, although its been suggested the ICS code does mess with the 3G signal ive not heard anything at all to suggest that it effects GPS as well.
See This Thread for details, ive copied the relevant bits here but all thanks should go to those on the original thread
Option 1
---- 11.3. If your device is not locked to a specific operator, you can use the Samsung Network Profile app (for 1st generation) or Wireless Manager (for 2nd generation)
-------- 11.3.1. Uninstall the Samsung Network Profile / Wireless Manager app.
-------- 11.3.2. Download and install the latest version of the Samsung Network Profile / Wireless Manager app from the Marketplace.
-------- 11.3.3. Open the Samsung Network Profile / Wireless Manager app.
-------- 11.3.4. Select a different Network Operator.
-------- 11.3.5. Now Select your own Network Operator again.
-------- 11.3.6. Exit the Network Profile / Wireless Manager app.
Option 2
Resolve Samsung connection problems
A lot of Samsung owners have complained here about connection problems. They blamed Interop Unlock, but apparently this has more to do with enabling "Internet Connection Sharing" than with "Interop Unlock". You should be able to recover the connection, apply this:
1. Start Diagnosis App> *#32489#
2. Tap "Back" 2 times to go back to Phone Control
3. Choose: [7] Network Control
4. Choose: [1] GFC
5. Choose: [3] Setting Cancellation
Wait for it to say success, then reboot.
GPS is a completely passive function, I don't have a problem with this, HSDPA may have issues for reasons unknown but using this method doesn't effect mine, perhaps its carrier specific..
Click to expand...
Click to collapse
Thanks for the info. I'll see if it helps. Just as FYI, the code *#32489# does not appear to work on the i937.
7carisfast said:
Thanks for the info. I'll see if it helps. Just as FYI, the code *#32489# does not appear to work on the i937.
Click to expand...
Click to collapse
indeed, so it would seem, many of the diagnostic codes have been disabled which is a pain, even the ones that are left don't always do what you expect them to do
8773 update
dazza9075 said:
firstly DO NOT INSTALL THE SAMSUNG UPDATE!! and if updating the OSan have it unlocked already read This Website and use the relock prevent + edit your hosts file
Absolutely back up your device at every stage using This Guide
So follow these steps
unlock the device Here follow the instructions which includes installing the diagnostic tool and install XAP deployer or XAP handler Here or Here With the XAP file deployer in the WP7 SDK
Then install WP7 Root Tools Here
Then install WP Bazaar market Here
Open Root Tools, and give Bazaar higher level privileges
Find WinTT on the Bazaar market and install it
Open Root Tools, and give WinTT higher level privileges
you may need to restart to get WinTT working
go through WinTT and turn on ICS
Done
Click to expand...
Click to collapse
What if I have already updated to version 7.10.8773.98, is there any other possible way? I don't need any other features. Thanks in advance.
If you have updated the OS and NOT the samsung firmware then reapply the windows break interop unlock, be sure to keep it off the inernet by disabling all coms and then apply the relock prevent xap. if you have applied the Samsung firmware and didn't have it already unlocked or you didn't have a back up, your screwed
Sent from my Samsung Focus S using XDA Windows Phone 7 App
dazza9075 said:
If you have updated the OS and NOT the samsung firmware then reapply the windows break interop unlock, be sure to keep it off the inernet by disabling all coms and then apply the relock prevent xap. if you have applied the Samsung firmware and didn't have it already unlocked or you didn't have a back up, your screwed
Sent from my Samsung Focus S using XDA Windows Phone 7 App
Click to expand...
Click to collapse
First of all I just want to say thanks that you're trying to help me, but I just didn't understand many things u said, I'm not really into technical stuff, but I'll tell you what info I have, in hope of u helping me better.
I don't live in the US and I bought the phone from ebay and it was unlocked and it works perfectly over 2 carriers here in my country, and I have never encountered any problems with it except for the internet sharing feature.
And about 3 months ago the phone notified my to a system upgrade from version 7.10.7740 to version 7.10.8107 then immediatly to version 7.10.8773.98. now I'm guessing these are OS firmwares not samsung software.
but I've noticed something, when I setup my phone for the first time I used a US hotmail account but before I connect to the internet the ICS feature worked, but once I signed in it gave me the dial 611 or go to att.com/mywireless message.
So I am guessing if I restore the device and sign in with a non US hotmail account may result in the feature to be unlocked. The only thing keeping me from trying this because I'll have to redownload all my apps again and reorganize my contacts again. if there's a way to avoid that or someone has tried it please do tell.
Again thanks for your reply.
kholio88 said:
First of all I just want to say thanks that you're trying to help me, but I just didn't understand many things u said, I'm not really into technical stuff, but I'll tell you what info I have, in hope of u helping me better.
I don't live in the US and I bought the phone from ebay and it was unlocked and it works perfectly over 2 carriers here in my country, and I have never encountered any problems with it except for the internet sharing feature.
And about 3 months ago the phone notified my to a system upgrade from version 7.10.7740 to version 7.10.8107 then immediatly to version 7.10.8773.98. now I'm guessing these are OS firmwares not samsung software.
but I've noticed something, when I setup my phone for the first time I used a US hotmail account but before I connect to the internet the ICS feature worked, but once I signed in it gave me the dial 611 or go to att.com/mywireless message.
So I am guessing if I restore the device and sign in with a non US hotmail account may result in the feature to be unlocked. The only thing keeping me from trying this because I'll have to redownload all my apps again and reorganize my contacts again. if there's a way to avoid that or someone has tried it please do tell.
Again thanks for your reply.
Click to expand...
Click to collapse
ok, no problem
can you go to your device settings, in the about section can you tell me your OS version and your firmware version
Samsung Firware Update
dazza9075 said:
ok, no problem
can you go to your device settings, in the about section can you tell me your OS version and your firmware version
Click to expand...
Click to collapse
Dazza,
Kudos for your help as you personally worked with me through this information. Not sure the Samsung update is a concern as I'm running fw2103.11.10.1 and everything works great.
Thanks again.
dazza9075 said:
ok, no problem
can you go to your device settings, in the about section can you tell me your OS version and your firmware version
Click to expand...
Click to collapse
OS version: 7.10.8773.98
Firmware version: 2103.12.05.2
kholio88 said:
OS version: 7.10.8773.98
Firmware version: 2103.12.05.2
Click to expand...
Click to collapse
im afraid to say your firmware is locked,
2103.11.10.1 is unlock-able, im pretty sure anything from xxxx.12.xx.x upwards is locked down solid
I don't suppose you made a backup? if you haven't then there is nothing you can do
the Samsung firmware update was released as a separate update at the same time as the tango 8773 build, it tried to install on mine after the 8773 build
Found a solution =D
dazza9075 said:
im afraid to say your firmware is locked,
2103.11.10.1 is unlock-able, im pretty sure anything from xxxx.12.xx.x upwards is locked down solid
I don't suppose you made a backup? if you haven't then there is nothing you can do
the Samsung firmware update was released as a separate update at the same time as the tango 8773 build, it tried to install on mine after the 8773 build
Click to expand...
Click to collapse
I'm really sorry for the late reply, was busy at work. but during that time I might have found a "Glitch" or a workaround to enable it and I have tested it many times and it works.
Well there are two ways:
1st one which is a sure thing:
1) Turn off the phone, then turn on again.
2) Once the phone is turned on, immediately go to settings>internet sharing and turn it on and BOOM there you go :laugh:
* I have tried this method over a dozen times and it works every single time
** The point here is that you have to enable it immediately after the phone is turned on, I think it happens because the phone doesn't have enough time to send the info. to the servers to know that it's not enabled by default.
2nd one which was succesful over 75% of the time:
1) Go to Settings>cellular>Turn Off, Wait like 5-10 seconds and turn on again.
2) Go to Internet sharing> Turn on, and enjoy :fingers-crossed:
***I don't know why do they work or how, may be it's a Glitch like I said before but the point is they do work
I hope that I've helped someone out there and Thanks to everyone who tried to help me
kholio88 said:
I'm really sorry for the late reply, was busy at work. but during that time I might have found a "Glitch" or a workaround to enable it and I have tested it many times and it works.
Well there are two ways:
1st one which is a sure thing:
1) Turn off the phone, then turn on again.
2) Once the phone is turned on, immediately go to settings>internet sharing and turn it on and BOOM there you go :laugh:
* I have tried this method over a dozen times and it works every single time
** The point here is that you have to enable it immediately after the phone is turned on, I think it happens because the phone doesn't have enough time to send the info. to the servers to know that it's not enabled by default.
2nd one which was succesful over 75% of the time:
1) Go to Settings>cellular>Turn Off, Wait like 5-10 seconds and turn on again.
2) Go to Internet sharing> Turn on, and enjoy :fingers-crossed:
***I don't know why do they work or how, may be it's a Glitch like I said before but the point is they do work
I hope that I've helped someone out there and Thanks to everyone who tried to help me
Click to expand...
Click to collapse
nice find, ICS is disabled locally only, it doesn't have anything to send, the only thing I can think of that makes sense is that the service hasn't been initialised and doesn't call the reg entries that disables ICS, by turning it on manually ASAP it perhaps catches it out. if you enable it, then disable it, can you still enable it again in that session or do you need to restart?
dazza9075 said:
nice find, ICS is disabled locally only, it doesn't have anything to send, the only thing I can think of that makes sense is that the service hasn't been initialised and doesn't call the reg entries that disables ICS, by turning it on manually ASAP it perhaps catches it out. if you enable it, then disable it, can you still enable it again in that session or do you need to restart?
Click to expand...
Click to collapse
Well I tried that, but there is no definite answer to it, sometimes I turn it on and off on and off many times without needing to restart and throughout the whole day, and sometimes it works once and doesn't at the second try. So it all comes down to luck, but still better than nothing
Now the thing is I'm afraid that when the 7.8 update comes, they would fix this glitch =D Haha.

[Q] Issues with T899M after update

Hi, I recently updated my Samsung Ativ S T899M phone to windows phone 8.1 via the developers preview app. I use the phone on the Telus network here in Canada. After I did the update I'm no longer able to enable wifi tethering. When I attempt to activate it, I get the following error: "Connection not shared - There's no cellular data connection to share right now. Check your cellular settings and signal, and try again.".
My APN settings are correct for Telus, I'm getting internet and am able to send and receive MMS. Does anyone know if this issue can be resolved? And if not, Is there a possibility of reverting back to the original rom I had installed?
We don't have base ROMs for the T899M, sadly. If your phone is interop-unlocked though, I'm working on a fix for the tethering issue here: http://forum.xda-developers.com/windows-phone-8/help/help-fix-internet-sharing-feature-t2843391. If it worked for you *before* 8.1 and doesn't now, that would be weird (and I'd appreciate you completing the process listed there).
You can also try flashing one of @-W_O_L_F-'s custom CSCs. They aren't full ROMs, but they still allow us to fix/change a lot of stuff. Some people have reported that they fix Internet Sharing.
For sure, I will follow your process! I'll let you know how it goes!
Fixed
Hey GoodDayToDie, sorry for the private message earlier. I managed to flash wolfs CSC file and I can confirm that it indeed fixes the internet sharing issue. Thanks again, and I'll follow your instructions on the other page to get the information you need.
I have this phone as well. It came from bell and it is unlocked, I currently am using it on koodo. Everything appears to work okay for me, even tethering via WiFi.
I am having other small problems however,
Whenever I reset my phone the ringtone goes back to default rather than staying on the custom
If I select 3g only it still connects to LTE which is horrible reception where I am located.
Enabling, and then disabling Airplane mode causes my phone to go all sluggish, only way to fix is to reboot.
Any one know of fixes for these issues in 8.1 DP on the t899m? would wolfs custom csc fix these issues?

[Q] Flash Lumia 1020?

Hi
I been having problems with using my "internet sharing" on my lumia 1020(keep telling me I need a data connection in order to use this feature....eventhough I do have). I asked around and one person asked if my lumia 1020 was from Rogers Canada which it was. Eventhough my phone is unlocked, this person is saying that the Rom on my phone is still Rogers and it is most likely the reason. He suggested getting rid of the rom, though I am not sure how to do this. I seen some posts here on how to flash but nothing for 1020, I am wondering if there is some guide for the 1020 as I really want step by step guide for my phone as I don't want to screw up.
Do you have the problem with both, wifi and mobile data connections? And did you try by connecting to a PC via USB (= using that connection)?
Also, why shouldn't it work with that particular ROM, did he explain that any further?
cäsar said:
Do you have the problem with both, wifi and mobile data connections? And did you try by connecting to a PC via USB (= using that connection)?
Also, why shouldn't it work with that particular ROM, did he explain that any further?
Click to expand...
Click to collapse
How I understand internet sharing works, is that it shuts off wifi and you can only use your data connection. It tries to shut it off and then I get this error ""there's no celluar data connection to share right now. check your cellular settings and signal, and try again"
Even though I can surf the internet before and after that message, so it is not my data connection. This guy thinks said he seen this happen on other phones and the he thinks the reason is that Rogers has like software locked that feature so that it only works with their Sims and that it is reject my Sim from another provider. He thinks that if I would reflash my computer with the Rogers rom then that check would not exist and it would work.
I am not sure what you mean by connecting to to a PC via USB. I can connect my phone to my computer and browse the file system of the phone, I just can't hotspot or really send MMS messages.
Oh, I thought you were talking about a different feature.
Yeah, you create a wifi hotspot from your data connection. What I said doesn't make sense then.
In general, you could also try a hard reset instead of fiddling with ROM, that's way safer. However, you will lose all your data on the device, so make sure you backup everything beforehand.
http://www.hard-reset.com/nokia-lumia-1020-hard-reset.html
I once had an issue with a settings page on my Lumia 800 back in WP7 days. Everything else failed, but a hard reset fixed it.
Is there any backup program to backup like your titles and stuff or will I have to setup all this up. I think my apps are backed up?
chobo2 said:
Hi
I been having problems with using my "internet sharing" on my lumia 1020(keep telling me I need a data connection in order to use this feature....eventhough I do have). I asked around and one person asked if my lumia 1020 was from Rogers Canada which it was. Eventhough my phone is unlocked, this person is saying that the Rom on my phone is still Rogers and it is most likely the reason. He suggested getting rid of the rom, though I am not sure how to do this. I seen some posts here on how to flash but nothing for 1020, I am wondering if there is some guide for the 1020 as I really want step by step guide for my phone as I don't want to screw up.
Click to expand...
Click to collapse
Hey I have that same phone you should not have to change the ROM
I got it working on mine but first
I want you to tell us a few things
Your current carrier
Have you installed the app "Access point" from Nokia?
Does calling work?
Does Data (internet explorer work)
wcomhelp said:
Hey I have that same phone you should not have to change the ROM
I got it working on mine but first
I want you to tell us a few things
Your current carrier
Have you installed the app "Access point" from Nokia?
Does calling work?
Does Data (internet explorer work)
Click to expand...
Click to collapse
Wind Mobile
I don't know what "Access Point" is. I am trying to use settings -> internet sharing - switching sharing from "off" to "on"
Yes calling works, texting works(besides mms texting which seems to work maybe 50% time)
Yes Data works, I can surf the net, use any data required. Only thing is "internet sharing" thinks it is off.
Search the internet for "Nokia access point app" you will get a link to the windows store to download the app. Download and install it. It fixes internet sharing.
wcomhelp said:
Search the internet for "Nokia access point app" you will get a link to the windows store to download the app. Download and install it. It fixes internet sharing.
Click to expand...
Click to collapse
Wooot, that seems to work!!!!
Now onto my next problem....why my MMS does not work with my Windows Phone and Wind Mobile.
Below is a link to a site that has the apn settings.
http://tinyurl.com/kud477t
wcomhelp said:
Below is a link to a site that has the apn settings.
http://tinyurl.com/kud477t
Click to expand...
Click to collapse
Yea.....I already googled it, as I stated in a previous post my MMS only sends 50% of the time. I tired most of the ones I found on the internet but still not working.
Works for me. Talk to wind and tell them you have an galaxy 3 or some other phone the sell, the them you need your phone reprovisioned (it just means the renew your cell network connection)

Hotspot "Authentication failed. Please try again later." message

Hi, I was just curious if anyone on here has ever got this message when trying to turn on the hotspot. I use straight talk with verizon towers. I have looked on line for a fix and have found forums with people who have the same problem and no one can seem to figure out if it is a phone problem or a carrier problem. Any help would be appreciated.
I'm having this same problem. Did you find a solution?
madmuthertrucker said:
I'm having this same problem. Did you find a solution?
Click to expand...
Click to collapse
I tried having straight talk do some things to try and fix it but they just made it worse. I went to Visible and it works fine now.
I was able to get mine working by Settings / System / Reset options / Reset
Wi-Fi, mobile & Bluetooth / then reboot phone. It wiped out all my settings for Wi-Fi and Bluetooth. Pain in the butt but, they are easy enough to add back. Hotspot is working though.
both my and my wife's phone, resetting APN & network settings has had no impact.
We're both on Pixel 7 Pro btw, just found your thread via search.

Categories

Resources