hi
i want to install phone buddy but it always gives a message "register software"
this is the same with cod2 that says "no owner information"
how i solve this? i installed the software with active sync!!
please help!! how do i register software?
Go to start>settings>personal>owner information and put in your "name." Then go to the site and follow instructions on how to purchase the product.
i did
my name is already there and all the software i uses are trials so i dont have to purchase them. any other solution?:S
Phone buddy says this: PhoneBuddy trial version. Please register you software.
:S
EDIT: ok the cod2 problem is solved with this but phonebuddy not
Hi all,
First off, you were guys were great help the previous questions I may have asked earlier. Thanks for that
Unfortunately, I came upon another problem. Specifically with Microsoft Voice Command 1.6 on my Xperia X1a.
I was able to install this through Active Sync a few months ago. Haven't used the application in a while, but it was working then.
However, when I try to ask it to play a media file, Voice Command responds with something like... "Error: The file 'Voice Command' cannot be opened. Either it is not signed with a trusted certification or one of its components cannot be found. Please re-install..." etc.
Though, when I try to uninstall and reinstall, Voice Command goes "An unrecoverable error occured in Setup. Reset the device and try again."
I'm assuming I would have to do something with the Registry files to clear this matter up?
Any help would be great! I'm totally stuck, cant unistall, cant reinstall :/
MAJOR UPDATE: The following error now applies to all known applications. ;____; PLEASE HELP
^^EDIT: I ended-up degrading my firmware. All problems thus solved. Sorry about this misfortunate post.
Protip: If all means the world is gonna end when your phone malfunctions, take a shot a firmware degrade / upgrade :]
Has anybody been able to flash a Lumia 925? I've read four different tutorials for Lumia flashing, none of them agreeing in the sequence of buttons pressing; and with each of the tutorials I always end up with some error message, either "wrong signal from the device", or "no signal from the device". The only log I get from the flashing software (Nokia Care Suit) is "recovery failed". I'm using Product Support Tool 2013.49.3.30, supposedly supporting Lumia 925.
Someone else? Some success flashing this phone?
zogoibi said:
Has anybody been able to flash a Lumia 925? I've read four different tutorials for Lumia flashing, none of them agreeing in the sequence of buttons pressing; and with each of the tutorials I always end up with some error message, either "wrong signal from the device", or "no signal from the device". The only log I get from the flashing software (Nokia Care Suit) is "recovery failed". I'm using Product Support Tool 2013.49.3.30, supposedly supporting Lumia 925.
Someone else? Some success flashing this phone?
Click to expand...
Click to collapse
You can make a screenshot of error?
Which button you press for pass your Nokia Lumia 925 "in flashing mode"?
Hi. Thanks for your reply. Well, I finally got past that problem with a brand new installation of NCS in a brand new system. But now I'm getting stuck after the "You have chosen not assigned product code for this device. Do you wish to continue?" dialog box. I click "Ok" there, and then I get another popup with this error message:
Could not load file or assembly 'Nokia.Murzim.Uefi.FlashApp.Core.dll' or one of its dependencies. The specified module could not be found.
Exception:
System.IO.FileNotFoundException: Could not load file or assembly 'Nokia.Murzim.Uefi.FlashApp.Core.dll' or one of its dependencies. The specified module could not be found.
File name: 'Nokia.Murzim.Uefi.FlashApp.Core.dll'
at Nokia.Murzim.Uefi.FlashApp.CoreProgrammerAdaptation.ProgrammerAdaptation.UnsubscribeEvents()
at Nokia.Murzim.Uefi.FlashApp.MurzimFlashApp.Release(Boolean release)
at Nokia.Murzim.Uefi.FlashApp.MurzimFlashApp.Release()
at Nokia.CareSuite.PlugIns.MurzimRecovery.RecoveryDialog.RecoveryDialogModel.Flash()
at Nokia.CareSuite.PlugIns.MurzimRecovery.RecoveryDialog.RecoveryDialogModel.<HandleDownloadVariantPackageCompleted>b__b(Object state)
I don't understand a word of that puzzle. Any idea of what might be going wrong? Seems like I'm missing some module, or perhaps some driver? But I get my phone recognized by the NCS software.
By the way, I've been mostly following your tutorial. With the brand new installation of software, getting to the flash mode (it shows "NOKIA" in the upper half of the screen) wasn't difficult: just press power + vol_down, then clic "retry". But, as I say, I can't get past the aforementioned error. I've tried removing and reinstalling NCS, to no avail. I'm on Windows 8, if it's of any use.
Did you resolve this?
galapogos01 said:
Did you resolve this?
Click to expand...
Click to collapse
Easy way to flash Lumia (and other Nokia series):
http://www.nokia.com/us-en/support/software-recovery/
NCS software you use only when you need to flash firmware with different product code and people must follow this instructions: http://forum.xda-developers.com/showthread.php?t=2515453
dxdy said:
Easy way to flash Lumia (and other Nokia series):
http://www.nokia.com/us-en/support/software-recovery/
NCS software you use only when you need to flash firmware with different product code and people must follow this instructions: http://forum.xda-developers.com/showthread.php?t=2515453
Click to expand...
Click to collapse
Thanks. I'm trying to change the product code and got the above error with multiple versions of NCS on both Win7 x64 and Win8.1 x64.
Cheers,
Jason
galapogos01 said:
Thanks. I'm trying to change the product code and got the above error with multiple versions of NCS on both Win7 x64 and Win8.1 x64.
Cheers,
Jason
Click to expand...
Click to collapse
Data Package Manager not working? then you must pay 3€ donation to Navifirm+
galapogos01 said:
Did you resolve this?
Click to expand...
Click to collapse
No, I never managed. I gave up long ago. Too much hassle. WP8 is too restrictive and I realized there was no point in wasting time with it. Best of lucks to you!
Well, after I tried about 45 versions of NCS, I uninstalled the drivers for the phone device in Device Manager, rebooted, tried again and it worked. The WP8 experiment continues!
that is driver problem, so NCS can't read your phone, delete/ uninstall all driver about your Lumia and reconnect them
Hello,I have bought used Lumia 1320 which is some showroom model and it says Not for resale when youre launching it. Problem with it is that I cant update it to WP 8.1 so it still runs WP8 which is not so good. If i try to update it through settings it says that i dont have any avabile updates. I tried it with Lumia Recovery Tool and it shows that i have avabile update but after it downloads it and restarts phone it show me error that my phone is not supported. I also tried it this way: http://forum.xda-developers.com/showthread.php?t=2515453
but it shows me error
Code:
0xFA001106: Signature check of FFU file fails. Reason(s): The FFU file is not correctly signed or not signed for this device.
Exception:
Nokia.CareSuite.PlugIns.MurzimRecovery.RecoveryDialog.MurzimProgrammingException: 0xFA001106: Signature check of FFU file fails. Reason(s): The FFU file is not correctly signed or not signed for this device.
v Nokia.CareSuite.PlugIns.MurzimRecovery.RecoveryDialog.RecoveryDialogModel.Flash()
v Nokia.CareSuite.PlugIns.MurzimRecovery.RecoveryDialog.RecoveryDialogModel.<HandleDownloadVariantPackageCompleted>b__c(Object state)
Is there any chance to make updates work? I have found some guy who told me that he can unlock it but he wants me to pay and I'll have to send him the phone because he lives too far away from me. So if theres some way how to unlock it,do any of you guys know it?
harmiczek said:
Hello,I have bought used Lumia 1320 which is some showroom model and it says Not for resale when youre launching it. Problem with it is that I cant update it to WP 8.1 so it still runs WP8 which is not so good. If i try to update it through settings it says that i dont have any avabile updates. I tried it with Lumia Recovery Tool and it shows that i have avabile update but after it downloads it and restarts phone it show me error that my phone is not supported. I also tried it this way: http://forum.xda-developers.com/showthread.php?t=2515453
but it shows me error
Code:
0xFA001106: Signature check of FFU file fails. Reason(s): The FFU file is not correctly signed or not signed for this device.
Exception:
Nokia.CareSuite.PlugIns.MurzimRecovery.RecoveryDialog.MurzimProgrammingException: 0xFA001106: Signature check of FFU file fails. Reason(s): The FFU file is not correctly signed or not signed for this device.
v Nokia.CareSuite.PlugIns.MurzimRecovery.RecoveryDialog.RecoveryDialogModel.Flash()
v Nokia.CareSuite.PlugIns.MurzimRecovery.RecoveryDialog.RecoveryDialogModel.<HandleDownloadVariantPackageCompleted>b__c(Object state)
Is there any chance to make updates work? I have found some guy who told me that he can unlock it but he wants me to pay and I'll have to send him the phone because he lives too far away from me. So if theres some way how to unlock it,do any of you guys know it?
Click to expand...
Click to collapse
use this guide it should solve your problem
http://forum.xda-developers.com/windows-phone-8/general/how-to-flash-nokia-care-suite-5-t3044200
Abdooz said:
use this guide it should solve your problem
...
Click to expand...
Click to collapse
Sigh. Read *correctly* the OP.
As I said it doesnt work... Thats why im looking for some other way
So do you have any idea how to fix this please?
I keep getting error saying that there was an error while communicating with Windows Dev Center every time I try to register my phone, and my time is correct on both phone and PC.
Can someone help me or tell me what am I doing wrong here
Thanks in advance.
Edit: error code is 0x64 if that helps.